当前位置: 首页>>代码示例>>C++>>正文


C++ Host::getPort方法代码示例

本文整理汇总了C++中Host::getPort方法的典型用法代码示例。如果您正苦于以下问题:C++ Host::getPort方法的具体用法?C++ Host::getPort怎么用?C++ Host::getPort使用的例子?那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在Host的用法示例。


在下文中一共展示了Host::getPort方法的6个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: setup

void MySQLClient::setup(Host& host, const string& user, const string& password, const string& db) //Setup connection, make DNS Req if necessary
{
  init(); //Initialize client in known state, create socket
  resetTimeout();
  m_host = host;
  if(!host.getPort())
    host.setPort( MYSQL_PORT ); //Default port
    
  m_user = user;
  m_password = password;
  
  m_db = db;

  if( !host.getIp().isNull() )
  {
    connect();
  }
  else //Need to do a DNS Query...
  {
    DBG("DNS Query...\n");
    m_pDnsReq = new DNSRequest();
    m_pDnsReq->setOnReply(this, &MySQLClient::onDNSReply);
    m_pDnsReq->resolve(&m_host);
    DBG("MySQLClient : DNSRequest %p\n", m_pDnsReq);
  }
}
开发者ID:TheGuv,项目名称:Firmware,代码行数:26,代码来源:MySQLClient.cpp

示例2: bind

NetUdpSocketErr LwipNetUdpSocket::bind(const Host& me)
{
  err_t err;

  if(!m_pPcb)
    return NETUDPSOCKET_MEM; //NetUdpSocket was not properly initialised, should destroy it & retry

  #if LWIP_IGMP //Multicast support enabled
  if(me.getIp().isMulticast())
  {
    DBG("This is a multicast addr, joining multicast group\r\n");
    m_multicastGroup = me.getIp();
    ip_addr_t multicastGroupAddr = m_multicastGroup.getStruct();
    err = igmp_joingroup(IP_ADDR_ANY, &multicastGroupAddr);
    if(err)
      return NETUDPSOCKET_IF; //Could not find or create group
  }
  #endif

  err = udp_bind( (udp_pcb*) m_pPcb, IP_ADDR_ANY, me.getPort()); //IP_ADDR_ANY : Bind the connection to all local addresses
  if(err)
    return NETUDPSOCKET_INUSE;

  //Setup callback
  udp_recv( (udp_pcb*) m_pPcb, LwipNetUdpSocket::sRecvCb, (void*) this );

  return NETUDPSOCKET_OK;
}
开发者ID:lukas2511,项目名称:LaosLaser_Dirty,代码行数:28,代码来源:lwipNetUdpSocket.cpp

示例3: bind

NetTcpSocketErr LwipNetTcpSocket::bind(const Host& me)
{
  if(!m_pPcb)
    return NETTCPSOCKET_MEM; //NetTcpSocket was not properly initialised, should destroy it & retry
    
  err_t err = tcp_bind( (tcp_pcb*) m_pPcb, IP_ADDR_ANY, me.getPort()); //IP_ADDR_ANY : Bind the connection to all local addresses
  if(err)
    return NETTCPSOCKET_INUSE;
    
  return NETTCPSOCKET_OK;
}
开发者ID:TheGuv,项目名称:Firmware,代码行数:11,代码来源:lwipNetTcpSocket.cpp

示例4: connect

NetTcpSocketErr LwipNetTcpSocket::connect(const Host& host)
{
  if(!m_pPcb)
    return NETTCPSOCKET_MEM; //NetTcpSocket was not properly initialised, should destroy it & retry
  
  ip_addr_t ip = host.getIp().getStruct();
  err_t err = tcp_connect( (tcp_pcb*) m_pPcb, &ip, host.getPort(), LwipNetTcpSocket::sConnectedCb );
  
  if(err)
    return NETTCPSOCKET_MEM;
    
  return NETTCPSOCKET_OK;
}
开发者ID:TheGuv,项目名称:Firmware,代码行数:13,代码来源:lwipNetTcpSocket.cpp

示例5: SetUp

	virtual void SetUp()
	{
		host1 = new Host("TestHost1", 2, &netSystem);
		host2 = new Host("TestHost2", 2, &netSystem);

		uint8_t mac1[6] = {0xBC,0xBC,0xBC,0xBC,0xBC,0xBC};
		uint8_t mac1_2[6] = {0xCB,0xCB,0xCB,0xCB,0xCB,0xCB};
		uint8_t mac2[6] = {0xCD,0xCD,0xCD,0xCD,0xCD,0xCD};
		uint8_t mac2_2[6] = {0xDC,0xDC,0xDC,0xDC,0xDC,0xDC};
		uint8_t ip1[4] = {192,168,0,7};
		uint8_t ip1_2[4] = {192,168,0,8};
		uint8_t ip2[4] = {10,0,1,4};
		uint8_t ip2_2[4] = {10,0,1,5};
		host1->setMACAddr(mac1, 0);
		host1->setMACAddr(mac1_2, 1);
		host1->setARPTable(mac2, ip2);
		host1->setARPTable(mac2_2, ip2_2);
		host1->setIPAddr(ip1, 0);
		host1->setIPAddr(ip1_2, 1);
		host1->setRoutingTable(ip2, 16, 0);
		host1->setRoutingTable(ip2_2, 16, 1);

		host2->setMACAddr(mac2, 0);
		host2->setMACAddr(mac2_2, 1);
		host2->setARPTable(mac1, ip1);
		host2->setARPTable(mac1_2, ip1_2);
		host2->setIPAddr(ip2, 0);
		host2->setIPAddr(ip2_2, 1);
		host2->setRoutingTable(ip1, 16, 0);
		host2->setRoutingTable(ip1_2, 16, 1);

		host1->getPort(0)->setPropagationDelay(TimeUtil::makeTime(1, TimeUtil::MSEC));
		host1->getPort(1)->setPropagationDelay(TimeUtil::makeTime(1, TimeUtil::MSEC));
		host2->getPort(0)->setPropagationDelay(TimeUtil::makeTime(1, TimeUtil::MSEC));
		host2->getPort(1)->setPropagationDelay(TimeUtil::makeTime(1, TimeUtil::MSEC));

		switchingHub = new Switch("Switch1", &netSystem);
		switchingHub->addPort(host1->getPort(0));
		switchingHub->addPort(host1->getPort(1));
		switchingHub->addPort(host2->getPort(0));
		switchingHub->addPort(host2->getPort(1));

		switchingHub->addMACEntry(host1->getPort(0), mac1);
		switchingHub->addMACEntry(host1->getPort(1), mac1_2);
		switchingHub->addMACEntry(host2->getPort(0), mac2);
		switchingHub->addMACEntry(host2->getPort(1), mac2_2);


		ethernet1 = new Ethernet(host1);
		ethernet2 = new Ethernet(host2);
		ipv4_1 = new IPv4(host1);
		ipv4_2 = new IPv4(host2);

		interface = Target::allocate(host1);
		interface2 = TCPSolutionProvider::allocate(host2, false, false, false);
		interface->initialize();
		interface2->initialize();
	}
开发者ID:ha1082104,项目名称:KENS,代码行数:58,代码来源:testenv.hpp

示例6: execute

void RoundRobinDistributor::execute() {
    std::unique_ptr<HttpResponse> response;
    Host *host;

    while (1) {
        std::unique_lock<std::mutex> lck(m_queue_mtx);
        //std::cout << "waiting" << std::endl;
        while (m_parsedRequests.empty()) m_queue_cv.wait(lck);
        //std::cout << "notified" << std::endl;
        m_requestTuple_t request = m_parsedRequests.front();
        m_parsedRequests.pop();
        lck.unlock();

        host = &(cluster_nodes->at(request.host));
        debug("Request send to host %s:%d", host->getUrl().c_str(), host->getPort());
        response = host->executeRequest(request.request);

        sendResponse(std::move(response), request.socket);
    }
}
开发者ID:DukeHarris,项目名称:dispatcher,代码行数:20,代码来源:RoundRobinDistributor.cpp


注:本文中的Host::getPort方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。