本文整理汇总了C++中GeoHeightField::getElevation方法的典型用法代码示例。如果您正苦于以下问题：C++ GeoHeightField::getElevation方法的具体用法？C++ GeoHeightField::getElevation怎么用？C++ GeoHeightField::getElevation使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类GeoHeightField的用法示例。
在下文中一共展示了GeoHeightField::getElevation方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: getMaxLevel
bool
ElevationQuery::getElevationImpl(const GeoPoint& point,
double& out_elevation,
double desiredResolution,
double* out_actualResolution)
{
osg::Timer_t start = osg::Timer::instance()->tick();
if ( _mapf.elevationLayers().empty() )
{
// this means there are no heightfields.
out_elevation = 0.0;
return true;
}
// tile size (resolution of elevation tiles)
unsigned tileSize = std::max(_mapf.getMapOptions().elevationTileSize().get(), 2u);
//This is the max resolution that we actually have data at this point
unsigned int bestAvailLevel = getMaxLevel( point.x(), point.y(), point.getSRS(), _mapf.getProfile());
if (desiredResolution > 0.0)
{
unsigned int desiredLevel = _mapf.getProfile()->getLevelOfDetailForHorizResolution( desiredResolution, tileSize );
if (desiredLevel < bestAvailLevel) bestAvailLevel = desiredLevel;
}
OE_DEBUG << LC << "Best available data level " << point.x() << ", " << point.y() << " = " << bestAvailLevel << std::endl;
// transform the input coords to map coords:
GeoPoint mapPoint = point;
if ( point.isValid() && !point.getSRS()->isHorizEquivalentTo( _mapf.getProfile()->getSRS() ) )
{
mapPoint = point.transform(_mapf.getProfile()->getSRS());
if ( !mapPoint.isValid() )
{
OE_WARN << LC << "Fail: coord transform failed" << std::endl;
return false;
}
}
// get the tilekey corresponding to the tile we need:
TileKey key = _mapf.getProfile()->createTileKey( mapPoint.x(), mapPoint.y(), bestAvailLevel );
if ( !key.valid() )
{
OE_WARN << LC << "Fail: coords fall outside map" << std::endl;
return false;
}
bool result = false;
while (!result)
{
GeoHeightField geoHF;
TileCache::Record record;
// Try to get the hf from the cache
if ( _cache.get( key, record ) )
{
geoHF = record.value();
}
else
{
// Create it
osg::ref_ptr<osg::HeightField> hf = new osg::HeightField();
hf->allocate( tileSize, tileSize );
// Initialize the heightfield to nodata
for (unsigned int i = 0; i < hf->getFloatArray()->size(); i++)
{
hf->getFloatArray()->at( i ) = NO_DATA_VALUE;
}
if (_mapf.populateHeightField( hf, key ) )
{
geoHF = GeoHeightField( hf.get(), key.getExtent() );
_cache.insert( key, geoHF );
}
}
if (geoHF.valid())
{
float elevation = 0.0f;
result = geoHF.getElevation( mapPoint.getSRS(), mapPoint.x(), mapPoint.y(), _mapf.getMapInfo().getElevationInterpolation(), mapPoint.getSRS(), elevation);
if (result && elevation != NO_DATA_VALUE)
{
// see what the actual resolution of the heightfield is.
if ( out_actualResolution )
*out_actualResolution = geoHF.getXInterval();
out_elevation = (double)elevation;
break;
}
else
{
result = false;
}
}
if (!result)
{
key = key.createParentKey();
if (!key.valid())
//.........这里部分代码省略.........
示例2: start
bool
ElevationQuery::getElevationImpl(const GeoPoint& point, /* abs */
double& out_elevation,
double desiredResolution,
double* out_actualResolution)
{
// assertion.
if ( !point.isAbsolute() )
{
OE_WARN << LC << "Assertion failure; input must be absolute" << std::endl;
return false;
}
osg::Timer_t begin = osg::Timer::instance()->tick();
// first try the terrain patches.
if ( _patchLayers.size() > 0 )
{
osgUtil::IntersectionVisitor iv;
for(std::vector<ModelLayer*>::iterator i = _patchLayers.begin(); i != _patchLayers.end(); ++i)
{
// find the scene graph for this layer:
osg::Node* node = (*i)->getSceneGraph( _mapf.getUID() );
if ( node )
{
// configure for intersection:
osg::Vec3d surface;
point.toWorld( surface );
// trivial bounds check:
if ( node->getBound().contains(surface) )
{
osg::Vec3d nvector;
point.createWorldUpVector(nvector);
osg::Vec3d start( surface + nvector*5e5 );
osg::Vec3d end ( surface - nvector*5e5 );
// first time through, set up the intersector on demand
if ( !_patchLayersLSI.valid() )
{
_patchLayersLSI = new DPLineSegmentIntersector(start, end);
_patchLayersLSI->setIntersectionLimit( _patchLayersLSI->LIMIT_NEAREST );
}
else
{
_patchLayersLSI->reset();
_patchLayersLSI->setStart( start );
_patchLayersLSI->setEnd ( end );
}
// try it.
iv.setIntersector( _patchLayersLSI.get() );
node->accept( iv );
// check for a result!!
if ( _patchLayersLSI->containsIntersections() )
{
osg::Vec3d isect = _patchLayersLSI->getIntersections().begin()->getWorldIntersectPoint();
// transform back to input SRS:
GeoPoint output;
output.fromWorld( point.getSRS(), isect );
out_elevation = output.z();
if ( out_actualResolution )
*out_actualResolution = 0.0;
return true;
}
}
else
{
//OE_INFO << LC << "Trivial rejection (bounds check)" << std::endl;
}
}
}
}
if ( _mapf.elevationLayers().empty() )
{
// this means there are no heightfields.
out_elevation = 0.0;
return true;
}
// tile size (resolution of elevation tiles)
unsigned tileSize = std::max(_mapf.getMapOptions().elevationTileSize().get(), 2u);
//This is the max resolution that we actually have data at this point
unsigned int bestAvailLevel = getMaxLevel( point.x(), point.y(), point.getSRS(), _mapf.getProfile());
if (desiredResolution > 0.0)
{
unsigned int desiredLevel = _mapf.getProfile()->getLevelOfDetailForHorizResolution( desiredResolution, tileSize );
if (desiredLevel < bestAvailLevel) bestAvailLevel = desiredLevel;
}
OE_DEBUG << LC << "Best available data level " << point.x() << ", " << point.y() << " = " << bestAvailLevel << std::endl;
//.........这里部分代码省略.........