本文整理汇总了C++中FPointArray::pointQF方法的典型用法代码示例。如果您正苦于以下问题：C++ FPointArray::pointQF方法的具体用法？C++ FPointArray::pointQF怎么用？C++ FPointArray::pointQF使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类FPointArray的用法示例。
在下文中一共展示了FPointArray::pointQF方法的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: mouseMoveEvent
void CanvasMode_EditArc::mouseMoveEvent(QMouseEvent *m)
{
const FPoint mousePointDoc = m_canvas->globalToCanvas(m->globalPos());
m->accept();
double newX = mousePointDoc.x();
double newY = mousePointDoc.y();
if (m_canvas->m_viewMode.m_MouseButtonPressed && m_view->moveTimerElapsed())
{
PageItem *currItem = m_doc->m_Selection->itemAt(0);
QTransform itemMatrix = currItem->getTransform();
QPointF sPoint = currItem->PoLine.pointQF(0);
QPointF smPoint = itemMatrix.map(sPoint);
QLineF stLinA = QLineF(smPoint, QPointF(m_Mxp, m_Myp));
QLineF stLinM = QLineF(smPoint, QPointF(newX, newY));
double deltaAngle = stLinM.angle() - stLinA.angle();
QPainterPath pp;
if (m_arcPoint == useControlStart)
m_startAngle += deltaAngle;
else if (m_arcPoint == useControlSweep)
m_endAngle += deltaAngle;
else if (m_arcPoint == useControlHeight)
m_heightPoint = QPointF(m_heightPoint.x(), m_heightPoint.y() + (newY - m_Myp));
else if (m_arcPoint == useControlWidth)
m_widthPoint = QPointF(m_widthPoint.x() + (newX - m_Mxp), m_widthPoint.y());
double nSweep = m_endAngle - m_startAngle;
if (nSweep < 0)
nSweep += 360;
double nWidth = sPoint.x() - m_widthPoint.x();
double nHeight = sPoint.y() - m_heightPoint.y();
if ((nWidth > 0) && (nHeight > 0))
{
pp.moveTo(sPoint);
pp.arcTo(QRectF(sPoint.x() - nWidth, sPoint.y() - nHeight, nWidth * 2, nHeight * 2), m_startAngle, nSweep);
pp.closeSubpath();
FPointArray ar;
ar.fromQPainterPath(pp);
if (m_arcPoint == useControlStart)
{
m_startPoint = ar.pointQF(2);
QLineF stLinA = QLineF(smPoint, itemMatrix.map(m_startPoint));
m_canvas->displayRotHUD(m->globalPos(), 360.0 - stLinA.angle());
}
else if (m_arcPoint == useControlSweep)
{
m_endPoint = ar.pointQF(ar.size() - 4);
QLineF stLinA = QLineF(smPoint, itemMatrix.map(m_endPoint));
m_canvas->displayRotHUD(m->globalPos(), 360.0 - stLinA.angle());
}
QLineF res = QLineF(m_centerPoint, m_startPoint);
QLineF swe = QLineF(m_centerPoint, m_endPoint);
vectorDialog->setValues(res.angle(), swe.angle(), nHeight * 2, nWidth * 2);
blockUpdateFromItem(true);
currItem->update();
blockUpdateFromItem(false);
m_doc->regionsChanged()->update(itemMatrix.mapRect(QRectF(0, 0, currItem->width(), currItem->height())).adjusted(-nWidth, -nHeight, nWidth, nHeight));
}
}
m_Mxp = newX;
m_Myp = newY;
}示例2: mouseMoveEvent
void CanvasMode_EditArc::mouseMoveEvent(QMouseEvent *m)
{
const FPoint mousePointDoc = m_canvas->globalToCanvas(m->globalPos());
m->accept();
double newX = mousePointDoc.x();
double newY = mousePointDoc.y();
if (m_canvas->m_viewMode.m_MouseButtonPressed && m_view->moveTimerElapsed())
{
PageItem *currItem = m_doc->m_Selection->itemAt(0);
QTransform itemMatrix;
itemMatrix.translate(currItem->xPos(), currItem->yPos());
itemMatrix.rotate(currItem->rotation());
QPointF sPoint = currItem->PoLine.pointQF(0);
QPointF smPoint = itemMatrix.map(sPoint);
QLineF stLinA = QLineF(smPoint, QPointF(Mxp, Myp));
QLineF stLinM = QLineF(smPoint, QPointF(newX, newY));
double deltaAngle = stLinM.angle() - stLinA.angle();
QPainterPath pp;
if (m_arcPoint == useControlStart)
startAngle += deltaAngle;
else if (m_arcPoint == useControlSweep)
endAngle += deltaAngle;
else if (m_arcPoint == useControlHeight)
heightPoint = QPointF(heightPoint.x(), heightPoint.y() + (newY - Myp));
else if (m_arcPoint == useControlWidth)
widthPoint = QPointF(widthPoint.x() + (newX - Mxp), widthPoint.y());
double nSweep = endAngle - startAngle;
if (nSweep < 0)
nSweep += 360;
double nWidth = sPoint.x() - widthPoint.x();
double nHeight = sPoint.y() - heightPoint.y();
pp.moveTo(sPoint);
pp.arcTo(QRectF(sPoint.x() - nWidth, sPoint.y() - nHeight, nWidth * 2, nHeight * 2), startAngle, nSweep);
pp.closeSubpath();
FPointArray ar;
ar.fromQPainterPath(pp);
if (m_arcPoint == useControlStart)
{
startPoint = ar.pointQF(2);
QLineF stLinA = QLineF(smPoint, itemMatrix.map(startPoint));
m_canvas->displayRotHUD(m->globalPos(), 360.0 - stLinA.angle());
}
else if (m_arcPoint == useControlSweep)
{
endPoint = ar.pointQF(ar.size() - 4);
QLineF stLinA = QLineF(smPoint, itemMatrix.map(endPoint));
m_canvas->displayRotHUD(m->globalPos(), 360.0 - stLinA.angle());
}
QLineF res = QLineF(centerPoint, startPoint);
QLineF swe = QLineF(centerPoint, endPoint);
VectorDialog->setValues(res.angle(), swe.angle(), nHeight * 2, nWidth * 2);
blockUpdateFromItem(true);
currItem->update();
blockUpdateFromItem(false);
QRectF upRect;
upRect = QRectF(QPointF(0, 0), QPointF(currItem->width(), currItem->height())).normalized();
upRect.translate(currItem->xPos(), currItem->yPos());
m_doc->regionsChanged()->update(upRect.adjusted(-10.0 - currItem->width() / 2.0, -10.0 - currItem->height() / 2.0, 10.0 + currItem->width() / 2.0, 10.0 + currItem->height() / 2.0));
}
Mxp = newX;
Myp = newY;
}示例3: mouseMoveEvent
void CanvasMode_EditPolygon::mouseMoveEvent(QMouseEvent *m)
{
const FPoint mousePointDoc = m_canvas->globalToCanvas(m->globalPos());
m->accept();
double newX = mousePointDoc.x();
double newY = mousePointDoc.y();
if (m_canvas->m_viewMode.m_MouseButtonPressed && m_view->moveTimerElapsed())
{
PageItem *currItem = m_doc->m_Selection->itemAt(0);
QTransform itemMatrix = currItem->getTransform();
QPointF cPoint = itemMatrix.map(centerPoint);
QLineF stLinA = QLineF(cPoint, QPointF(newX, newY));
uint cx = polyUseFactor ? polyCorners * 2 : polyCorners;
double seg = 360.0 / cx;
double trueLength = sqrt(pow(sin(seg / 180.0 * M_PI) * (currItem->width() / 2.0), 2) + pow(cos(seg / 180.0 * M_PI) * (currItem->height() / 2.0) + (currItem->height()/2.0) - currItem->height(), 2));
if (m_polygonPoint == useControlInner)
{
polyInnerRot = stLinA.angle() - 90 - polyRotation - seg;
double factor = stLinA.length() / sqrt(pow(sin(stLinA.angle() * M_PI / 180.0) * currItem->height() / 2.0, 2) + pow(cos(stLinA.angle() * M_PI / 180.0) * currItem->width() / 2.0, 2));
int maxF = qRound(getUserValFromFactor(factor));
if (maxF <= 100)
polyFactor = factor;
}
if (m_polygonPoint == useControlOuter)
{
polyRotation = stLinA.angle() - 90;
if (polyRotation < -180)
polyRotation += 360;
if (polyRotation > 180)
polyRotation -= 360;
}
if (m_polygonPoint == useControlInnerCurve)
{
QPointF ePoint = itemMatrix.map(endPoint);
QLineF stLinC = QLineF(ePoint, QPointF(newX, newY));
polyCurvature = stLinC.length() / trueLength;
}
if (m_polygonPoint == useControlOuterCurve)
{
QPointF sPoint = itemMatrix.map(startPoint);
QPointF sPoint2 = itemMatrix.map(currItem->PoLine.pointQF(6));
QLineF stLinCo = QLineF(sPoint, QPointF(newX, newY));
QLineF stLinCo2 = QLineF(sPoint, sPoint2);
polyOuterCurvature = stLinCo.length() / stLinCo2.length();
}
QPainterPath path = RegularPolygonPath(currItem->width(), currItem->height(), polyCorners, polyUseFactor, polyFactor, polyRotation, polyCurvature, polyInnerRot, polyOuterCurvature);
FPointArray ar;
ar.fromQPainterPath(path);
endPoint = ar.pointQF(2);
startPoint = ar.pointQF(0);
QLineF innerLine = QLineF(endPoint, centerPoint);
innerLine.setAngle(innerLine.angle() + 90);
innerLine.setLength(trueLength * polyCurvature);
innerCPoint = innerLine.p2();
QLineF outerLine = QLineF(startPoint, ar.pointQF(6));
outerLine.setLength(outerLine.length() * polyOuterCurvature);
outerCPoint = outerLine.p2();
VectorDialog->setValues(polyCorners, polyFactor, polyUseFactor, polyRotation, polyCurvature, polyInnerRot, polyOuterCurvature);
blockUpdateFromItem(true);
currItem->update();
blockUpdateFromItem(false);
path = itemMatrix.map(path);
m_doc->regionsChanged()->update(path.boundingRect().adjusted(-5, -5, 10, 10));
}
Mxp = newX;
Myp = newY;
}