本文整理汇总了C++中ECL_RollController::control_attitude方法的典型用法代码示例。如果您正苦于以下问题：C++ ECL_RollController::control_attitude方法的具体用法？C++ ECL_RollController::control_attitude怎么用？C++ ECL_RollController::control_attitude使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类ECL_RollController的用法示例。
在下文中一共展示了ECL_RollController::control_attitude方法的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: warnx
//.........这里部分代码省略.........
parameters_update();
}
/* only run controller if attitude changed */
if (fds[1].revents & POLLIN) {
static uint64_t last_run = 0;
float deltaT = (hrt_absolute_time() - last_run) / 1000000.0f;
last_run = hrt_absolute_time();
/* guard against too large deltaT's */
if (deltaT > 1.0f)
deltaT = 0.01f;
/* load local copies */
orb_copy(ORB_ID(vehicle_attitude), _att_sub, &_att);
vehicle_airspeed_poll();
vehicle_setpoint_poll();
vehicle_accel_poll();
vehicle_control_mode_poll();
vehicle_manual_poll();
global_pos_poll();
/* lock integrator until control is started */
bool lock_integrator;
if (_vcontrol_mode.flag_control_attitude_enabled) {
lock_integrator = false;
} else {
lock_integrator = true;
}
/* Simple handling of failsafe: deploy parachute if failsafe is on */
if (_vcontrol_mode.flag_control_termination_enabled) {
_actuators_airframe.control[1] = 1.0f;
// warnx("_actuators_airframe.control[1] = 1.0f;");
} else {
_actuators_airframe.control[1] = 0.0f;
// warnx("_actuators_airframe.control[1] = -1.0f;");
}
/* decide if in stabilized or full manual control */
if (_vcontrol_mode.flag_control_attitude_enabled) {
/* scale around tuning airspeed */
float airspeed;
/* if airspeed is not updating, we assume the normal average speed */
if (bool nonfinite = !isfinite(_airspeed.true_airspeed_m_s) ||
hrt_elapsed_time(&_airspeed.timestamp) > 1e6) {
airspeed = _parameters.airspeed_trim;
if (nonfinite) {
perf_count(_nonfinite_input_perf);
}
} else {
airspeed = _airspeed.true_airspeed_m_s;示例2: q_att
//.........这里部分代码省略.........
// move the actual control value continuous with time, full flap travel in 1sec
if (fabsf(_flaps_applied - flap_control) > 0.01f) {
_flaps_applied += (_flaps_applied - flap_control) < 0 ? deltaT : -deltaT;
} else {
_flaps_applied = flap_control;
}
/* default flaperon to center */
float flaperon_control = 0.0f;
/* map flaperons by default to manual if valid */
if (PX4_ISFINITE(_manual.aux2) && _vcontrol_mode.flag_control_manual_enabled
&& fabsf(_parameters.flaperon_scale) > 0.01f) {
flaperon_control = 0.5f * (_manual.aux2 + 1.0f) * _parameters.flaperon_scale;
} else if (_vcontrol_mode.flag_control_auto_enabled
&& fabsf(_parameters.flaperon_scale) > 0.01f) {
flaperon_control = _att_sp.apply_flaps ? 1.0f * _parameters.flaperon_scale : 0.0f;
}
// move the actual control value continuous with time, full flap travel in 1sec
if (fabsf(_flaperons_applied - flaperon_control) > 0.01f) {
_flaperons_applied += (_flaperons_applied - flaperon_control) < 0 ? deltaT : -deltaT;
} else {
_flaperons_applied = flaperon_control;
}
// Check if we are in rattitude mode and the pilot is above the threshold on pitch
if (_vcontrol_mode.flag_control_rattitude_enabled) {
if (fabsf(_manual.y) > _parameters.rattitude_thres ||
fabsf(_manual.x) > _parameters.rattitude_thres) {
_vcontrol_mode.flag_control_attitude_enabled = false;
}
}
/* decide if in stabilized or full manual control */
if (_vcontrol_mode.flag_control_rates_enabled) {
/* scale around tuning airspeed */
float airspeed;
/* if airspeed is non-finite or not valid or if we are asked not to control it, we assume the normal average speed */
const bool airspeed_valid = PX4_ISFINITE(_sub_airspeed.get().indicated_airspeed_m_s)
&& ((_sub_airspeed.get().timestamp - hrt_absolute_time()) < 1e6);
if (airspeed_valid) {
/* prevent numerical drama by requiring 0.5 m/s minimal speed */
airspeed = math::max(0.5f, _sub_airspeed.get().indicated_airspeed_m_s);
} else {
airspeed = _parameters.airspeed_trim;
perf_count(_nonfinite_input_perf);
}
/*
* For scaling our actuators using anything less than the min (close to stall)
* speed doesn't make any sense - its the strongest reasonable deflection we
* want to do in flight and its the baseline a human pilot would choose.
*
* Forcing the scaling to this value allows reasonable handheld tests.
*/
float airspeed_scaling = _parameters.airspeed_trim / ((airspeed < _parameters.airspeed_min) ? _parameters.airspeed_min :
airspeed);
/* Use min airspeed to calculate ground speed scaling region.示例3: poll
//.........这里部分代码省略.........
PX4_R(_att.R, 0, 0) = R_adapted(0, 0);
PX4_R(_att.R, 0, 1) = R_adapted(0, 1);
PX4_R(_att.R, 0, 2) = R_adapted(0, 2);
PX4_R(_att.R, 1, 0) = R_adapted(1, 0);
PX4_R(_att.R, 1, 1) = R_adapted(1, 1);
PX4_R(_att.R, 1, 2) = R_adapted(1, 2);
PX4_R(_att.R, 2, 0) = R_adapted(2, 0);
PX4_R(_att.R, 2, 1) = R_adapted(2, 1);
PX4_R(_att.R, 2, 2) = R_adapted(2, 2);
/* lastly, roll- and yawspeed have to be swaped */
float helper = _att.rollspeed;
_att.rollspeed = -_att.yawspeed;
_att.yawspeed = helper;
}
vehicle_airspeed_poll();
vehicle_setpoint_poll();
vehicle_accel_poll();
vehicle_control_mode_poll();
vehicle_manual_poll();
global_pos_poll();
vehicle_status_poll();
/* lock integrator until control is started */
bool lock_integrator;
if (_vcontrol_mode.flag_control_attitude_enabled && !_vehicle_status.is_rotary_wing) {
lock_integrator = false;
} else {
lock_integrator = true;
}
/* Simple handling of failsafe: deploy parachute if failsafe is on */
if (_vcontrol_mode.flag_control_termination_enabled) {
_actuators_airframe.control[7] = 1.0f;
//warnx("_actuators_airframe.control[1] = 1.0f;");
} else {
_actuators_airframe.control[7] = 0.0f;
//warnx("_actuators_airframe.control[1] = -1.0f;");
}
/* default flaps to center */
float flaps_control = 0.0f;
/* map flaps by default to manual if valid */
if (isfinite(_manual.flaps)) {
flaps_control = _manual.flaps;
}
/* decide if in stabilized or full manual control */
if (_vcontrol_mode.flag_control_attitude_enabled) {
/* scale around tuning airspeed */
float airspeed;
/* if airspeed is not updating, we assume the normal average speed */