本文整理汇总了C++中DiagnosticsEngine::SetDelayedDiagnostic方法的典型用法代码示例。如果您正苦于以下问题：C++ DiagnosticsEngine::SetDelayedDiagnostic方法的具体用法？C++ DiagnosticsEngine::SetDelayedDiagnostic怎么用？C++ DiagnosticsEngine::SetDelayedDiagnostic使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类DiagnosticsEngine的用法示例。
在下文中一共展示了DiagnosticsEngine::SetDelayedDiagnostic方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: ProcessDiag
/// ProcessDiag - This is the method used to report a diagnostic that is
/// finally fully formed.
bool DiagnosticIDs::ProcessDiag(DiagnosticsEngine &Diag) const {
Diagnostic Info(&Diag);
if (Diag.SuppressAllDiagnostics)
return false;
assert(Diag.getClient() && "DiagnosticClient not set!");
// Figure out the diagnostic level of this message.
unsigned DiagID = Info.getID();
DiagnosticIDs::Level DiagLevel
= getDiagnosticLevel(DiagID, Info.getLocation(), Diag);
if (DiagLevel != DiagnosticIDs::Note) {
// Record that a fatal error occurred only when we see a second
// non-note diagnostic. This allows notes to be attached to the
// fatal error, but suppresses any diagnostics that follow those
// notes.
if (Diag.LastDiagLevel == DiagnosticIDs::Fatal)
Diag.FatalErrorOccurred = true;
Diag.LastDiagLevel = DiagLevel;
}
// Update counts for DiagnosticErrorTrap even if a fatal error occurred.
if (DiagLevel >= DiagnosticIDs::Error) {
++Diag.TrapNumErrorsOccurred;
if (isUnrecoverable(DiagID))
++Diag.TrapNumUnrecoverableErrorsOccurred;
}
// If a fatal error has already been emitted, silence all subsequent
// diagnostics.
if (Diag.FatalErrorOccurred) {
if (DiagLevel >= DiagnosticIDs::Error &&
Diag.Client->IncludeInDiagnosticCounts()) {
++Diag.NumErrors;
++Diag.NumErrorsSuppressed;
}
return false;
}
// If the client doesn't care about this message, don't issue it. If this is
// a note and the last real diagnostic was ignored, ignore it too.
if (DiagLevel == DiagnosticIDs::Ignored ||
(DiagLevel == DiagnosticIDs::Note &&
Diag.LastDiagLevel == DiagnosticIDs::Ignored))
return false;
if (DiagLevel >= DiagnosticIDs::Error) {
if (isUnrecoverable(DiagID))
Diag.UnrecoverableErrorOccurred = true;
// Warnings which have been upgraded to errors do not prevent compilation.
if (isDefaultMappingAsError(DiagID))
Diag.UncompilableErrorOccurred = true;
Diag.ErrorOccurred = true;
if (Diag.Client->IncludeInDiagnosticCounts()) {
++Diag.NumErrors;
}
// If we've emitted a lot of errors, emit a fatal error instead of it to
// stop a flood of bogus errors.
if (Diag.ErrorLimit && Diag.NumErrors > Diag.ErrorLimit &&
DiagLevel == DiagnosticIDs::Error) {
Diag.SetDelayedDiagnostic(diag::fatal_too_many_errors);
return false;
}
}
// Finally, report it.
EmitDiag(Diag, DiagLevel);
return true;
}示例2: ProcessDiag
/// ProcessDiag - This is the method used to report a diagnostic that is
/// finally fully formed.
bool DiagnosticIDs::ProcessDiag(DiagnosticsEngine &Diag) const {
Diagnostic Info(&Diag);
if (Diag.SuppressAllDiagnostics)
return false;
assert(Diag.getClient() && "DiagnosticClient not set!");
// Figure out the diagnostic level of this message.
DiagnosticIDs::Level DiagLevel;
unsigned DiagID = Info.getID();
if (DiagID >= diag::DIAG_UPPER_LIMIT) {
// Handle custom diagnostics, which cannot be mapped.
DiagLevel = CustomDiagInfo->getLevel(DiagID);
} else {
// Get the class of the diagnostic. If this is a NOTE, map it onto whatever
// the diagnostic level was for the previous diagnostic so that it is
// filtered the same as the previous diagnostic.
unsigned DiagClass = getBuiltinDiagClass(DiagID);
if (DiagClass == CLASS_NOTE) {
DiagLevel = DiagnosticIDs::Note;
} else {
DiagLevel = getDiagnosticLevel(DiagID, DiagClass, Info.getLocation(),
Diag);
}
}
if (DiagLevel != DiagnosticIDs::Note) {
// Record that a fatal error occurred only when we see a second
// non-note diagnostic. This allows notes to be attached to the
// fatal error, but suppresses any diagnostics that follow those
// notes.
if (Diag.LastDiagLevel == DiagnosticIDs::Fatal)
Diag.FatalErrorOccurred = true;
Diag.LastDiagLevel = DiagLevel;
}
// Update counts for DiagnosticErrorTrap even if a fatal error occurred.
if (DiagLevel >= DiagnosticIDs::Error) {
++Diag.TrapNumErrorsOccurred;
if (isUnrecoverable(DiagID))
++Diag.TrapNumUnrecoverableErrorsOccurred;
}
// If a fatal error has already been emitted, silence all subsequent
// diagnostics.
if (Diag.FatalErrorOccurred) {
if (DiagLevel >= DiagnosticIDs::Error &&
Diag.Client->IncludeInDiagnosticCounts()) {
++Diag.NumErrors;
++Diag.NumErrorsSuppressed;
}
return false;
}
// If the client doesn't care about this message, don't issue it. If this is
// a note and the last real diagnostic was ignored, ignore it too.
if (DiagLevel == DiagnosticIDs::Ignored ||
(DiagLevel == DiagnosticIDs::Note &&
Diag.LastDiagLevel == DiagnosticIDs::Ignored))
return false;
if (DiagLevel >= DiagnosticIDs::Error) {
if (isUnrecoverable(DiagID))
Diag.UnrecoverableErrorOccurred = true;
if (Diag.Client->IncludeInDiagnosticCounts()) {
Diag.ErrorOccurred = true;
++Diag.NumErrors;
}
// If we've emitted a lot of errors, emit a fatal error instead of it to
// stop a flood of bogus errors.
if (Diag.ErrorLimit && Diag.NumErrors > Diag.ErrorLimit &&
DiagLevel == DiagnosticIDs::Error) {
Diag.SetDelayedDiagnostic(diag::fatal_too_many_errors);
return false;
}
}
// If we have any Fix-Its, make sure that all of the Fix-Its point into
// source locations that aren't macro expansions. If any point into macro
// expansions, remove all of the Fix-Its.
for (unsigned I = 0, N = Diag.NumFixItHints; I != N; ++I) {
const FixItHint &FixIt = Diag.FixItHints[I];
if (FixIt.RemoveRange.isInvalid() ||
FixIt.RemoveRange.getBegin().isMacroID() ||
FixIt.RemoveRange.getEnd().isMacroID()) {
Diag.NumFixItHints = 0;
break;
}
}
// Finally, report it.
Diag.Client->HandleDiagnostic((DiagnosticsEngine::Level)DiagLevel, Info);
//.........这里部分代码省略.........