当前位置: 首页>>代码示例>>C++>>正文

C++ DataSetHeader::AddNameValParam方法代码示例

本文整理汇总了C++中DataSetHeader::AddNameValParam方法的典型用法代码示例。如果您正苦于以下问题：C++ DataSetHeader::AddNameValParam方法的具体用法？C++ DataSetHeader::AddNameValParam怎么用？C++ DataSetHeader::AddNameValParam使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类DataSetHeader的用法示例。


在下文中一共展示了DataSetHeader::AddNameValParam方法的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: WriteOutGenericDATDataFileNoGrid

void TestFileGenerator::WriteOutGenericDATDataFileNoGrid()
{
	GenericDataHeader gdh;
	AddStandardGenericDataHeader(gdh);

	// Fill the DataGroupHeader
	DataGroupHeader dch;
	dch.SetName(L"First Data Cube");

	// Fill the DataSetHeader
	DataSetHeader dph;
	dph.SetName(L"acquired data");
	ParameterNameValueType nvt;
	nvt.SetName(L"Scanner");
	nvt.SetValueText(L"M10");
	dph.AddNameValParam(nvt);
	nvt.SetName(L"Pixel Size");
	nvt.SetValueFloat(0.051f);
	dph.AddNameValParam(nvt);

	dph.AddColumn(UShortColumn(L"Pixel"));

	int32_t rows = 100;
	dph.SetRowCnt(rows);

	dch.AddDataSetHdr(dph);

	// Set the FileHeader
	FileHeader fh;
	fh.SetFilename("test.file.data_dat");
	fh.SetGenericDataHdr(gdh);
	fh.AddDataGroupHdr(dch);

	// Create the generic file writer
	GenericFileWriter gfWriter(&fh);
	gfWriter.WriteHeader();

	DataGroupWriterIt dcwBegin, dcwEnd;
	gfWriter.GetDataGroupWriters(dcwBegin, dcwEnd);

	DataGroupWriter d = *dcwBegin;
	dcwBegin->WriteHeader();

	DataSetWriterIt dpwBegin, dpwEnd;
	dcwBegin->GetDataSetWriters(dpwBegin, dpwEnd);

	dpwBegin->WriteHeader();

	// Write out the data
	for( int32_t i=0; i < rows; ++i )
	{
		u_int16_t value = (u_int16_t)(i*10+i);
		dpwBegin->Write(value);
	}

	dpwBegin->UpdateNextDataSetOffset();
	dcwBegin->Close();
}
开发者ID:，项目名称:，代码行数:58，代码来源:

示例2: WriteOutGenericDataFileWithAllColumnTypes

void TestFileGenerator::WriteOutGenericDataFileWithAllColumnTypes()
{
	GenericDataHeader gdh;
	AddStandardGenericDataHeader(gdh);

	// Fill the DataGroupHeader
	DataGroupHeader dch;
	dch.SetName(L"default");	// default DataGroup

	// Fill the all types DataSetHeader
	DataSetHeader dphAT;
	dphAT.SetName(L"all types");
	ParameterNameValueType nvt;
	nvt.SetName(L"How many types");
	nvt.SetValueText(L"All types");
	dphAT.AddNameValParam(nvt);
	nvt.SetName(L"Powered by");
	nvt.SetValueText(L"Affymetrix");
	dphAT.AddNameValParam(nvt);

	dphAT.AddColumn(ByteColumn(L"Byte type"));
	dphAT.AddColumn(UByteColumn(L"UByte type"));
	dphAT.AddColumn(ASCIIColumn(L"ASCII type", 10));
	dphAT.AddColumn(ShortColumn(L"Short type"));
	dphAT.AddColumn(UShortColumn(L"UShort type"));
	dphAT.AddColumn(IntColumn(L"Int type"));
	dphAT.AddColumn(UIntColumn(L"UInt type"));
	dphAT.AddColumn(UnicodeColumn(L"Unicode type", 15));
	dphAT.AddColumn(FloatColumn(L"Float type"));

	int32_t rows = 2;
	dphAT.SetRowCnt(rows);

	dch.AddDataSetHdr(dphAT);

	// Set the FileHeader
	FileHeader fh;
	fh.SetFilename("test.file.data_all_column_types");
	fh.SetGenericDataHdr(gdh);
	fh.AddDataGroupHdr(dch);

	// Create the generic file writer
	GenericFileWriter gfWriter(&fh);
	gfWriter.WriteHeader();

	DataGroupWriterIt dcwBegin, dcwEnd;
	gfWriter.GetDataGroupWriters(dcwBegin, dcwEnd);

	DataGroupWriter d = *dcwBegin;
	dcwBegin->WriteHeader();

	DataSetWriterIt dpwBegin, dpwEnd;
	dcwBegin->GetDataSetWriters(dpwBegin, dpwEnd);

	// Write out the all types DataSet

	dpwBegin->WriteHeader();

	for( int32_t row = 0; row < rows; ++row )
	{
		char str[10];
		wchar_t wstr[15];
		int8_t b = 1+10*row;
		u_int8_t ub = 2+10*row;
		sprintf(str, "%d", 3+10*row);
		int16_t s = 4+10*row;
		u_int16_t us = 5+10*row;
		int32_t i = 6+10*row;
		u_int32_t ui = 7+10*row;
		FormatString1(wstr, 15, L"%d", 8+10*row);
		float f = 9+10*row;

		dpwBegin->Write(b);	// btye
		dpwBegin->Write(ub);	// unsigned byte
		dpwBegin->Write(str, 10);	// ACSII string
		dpwBegin->Write(s);	// short
		dpwBegin->Write(us);	// unsigned short
		dpwBegin->Write(i);	// int
		dpwBegin->Write(ui);	// unsigned int
		dpwBegin->Write(wstr, 15);	// Unicode string
		dpwBegin->Write(f);	// float
	}

	dpwBegin->UpdateNextDataSetOffset();
	dcwBegin->Close();
}
开发者ID:，项目名称:，代码行数:86，代码来源:

示例3: WriteOutGenericDATDataFileWithGrid

void TestFileGenerator::WriteOutGenericDATDataFileWithGrid()
{
	GenericDataHeader gdh;
	AddStandardGenericDataHeader(gdh);

	// Fill the DataGroupHeader
	DataGroupHeader dch;
	dch.SetName(L"");	// unnamed DataGroup

	// Fill the pixel intensity DataSetHeader
	DataSetHeader dphPixel;
	dphPixel.SetName(L"acquired data");
	ParameterNameValueType nvt;
	nvt.SetName(L"Scanner");
	nvt.SetValueText(L"M10");
	dphPixel.AddNameValParam(nvt);
	nvt.SetName(L"Pixel Size");
	nvt.SetValueFloat(0.051f);
	dphPixel.AddNameValParam(nvt);

	dphPixel.AddColumn(UShortColumn(L"Pixel"));

	int32_t rows = 1000;
	dphPixel.SetRowCnt(rows);

	dch.AddDataSetHdr(dphPixel);

	// Fill the grid DataSetHeader
	DataSetHeader dphGrid;
	dphGrid.SetName(L"grid position");
	nvt.SetName(L"GhostGrids");
	nvt.SetValueText(L"True");
	dphGrid.AddNameValParam(nvt);
	nvt.SetName(L"Pixel Size");
	nvt.SetValueFloat(0.051f);
	dphGrid.AddNameValParam(nvt);

	dphGrid.AddColumn(FloatColumn(L"Upper left x"));
	dphGrid.AddColumn(FloatColumn(L"Upper left y"));
	dphGrid.AddColumn(FloatColumn(L"Upper right x"));
	dphGrid.AddColumn(FloatColumn(L"Upper right y"));
	dphGrid.AddColumn(FloatColumn(L"Lower right x"));
	dphGrid.AddColumn(FloatColumn(L"Lower right y"));
	dphGrid.AddColumn(FloatColumn(L"Lower left x"));
	dphGrid.AddColumn(FloatColumn(L"Lower left y"));

	int32_t grids = 5;	// first is the global grid with 4 subgrids
	dphGrid.SetRowCnt(grids);

	dch.AddDataSetHdr(dphGrid);

	// Set the FileHeader
	FileHeader fh;
	fh.SetFilename("test.file.data_dat_with_grid");
	fh.SetGenericDataHdr(gdh);
	fh.AddDataGroupHdr(dch);

	// Create the generic file writer
	GenericFileWriter gfWriter(&fh);
	gfWriter.WriteHeader();

	DataGroupWriterIt dcwBegin, dcwEnd;
	gfWriter.GetDataGroupWriters(dcwBegin, dcwEnd);

	DataGroupWriter d = *dcwBegin;
	dcwBegin->WriteHeader();

	DataSetWriterIt dpwBegin, dpwEnd;
	dcwBegin->GetDataSetWriters(dpwBegin, dpwEnd);

	// Write out the pixel DataSet

	dpwBegin->WriteHeader();

	for( int32_t i=0; i < rows; ++i )
	{
		u_int16_t value = (u_int16_t)(i*10+i);
		dpwBegin->Write(value);
	}

	dpwBegin->UpdateNextDataSetOffset();

	++dpwBegin;

	// Write out the grid DataSet

	dpwBegin->WriteHeader();

	for( int32_t i=0; i < grids; ++i )
	{
		for (int32_t corner = 0; corner < 4; ++corner)
		{
			float value = (float)(i*100 + corner);
			dpwBegin->Write(value);
			dpwBegin->Write(value);
		}
	}

	dpwBegin->UpdateNextDataSetOffset();

//.........这里部分代码省略.........
开发者ID:，项目名称:，代码行数:101，代码来源:

示例4: dphWriter

// Uses a mix of the GenericFileWriter and raw commands
void TestFileGenerator::WriteOutGenericDATDataFile1UsingGenericWriter()
{
	GenericDataHeader gdh;
	AddStandardGenericDataHeader(gdh);

	// Fill the DataSetHeader
	DataSetHeader dph;
	dph.SetName(L"acquired data");
	ParameterNameValueType nvt;
	nvt.SetName(L"Scanner");
	nvt.SetValueText(L"M10");
	dph.AddNameValParam(nvt);
	nvt.SetName(L"Pixel Size");
	nvt.SetValueFloat(0.051f);
	dph.AddNameValParam(nvt);
	dph.AddColumn(UShortColumn(L"Pixel"));

	int32_t rows = 100;
	dph.SetRowCnt(rows);

	// Open the file.
	ofstream fileStream;
	fileStream.open( "test.file.data_dat", ios_base::out | ios_base::binary | ios_base::trunc);

	// Write the file header using raw methods until the writer is available.
	// magic number
	FileOutput::WriteUInt8(fileStream, 59);

	// version
	FileOutput::WriteInt8(fileStream, 1);

	// Number of data cubes - confirm this
	FileOutput::WriteUInt32(fileStream, 1);

	// offset to the data cube byte offset array
	int offsetLocation = fileStream.tellp();
	FileOutput::WriteUInt32(fileStream, 1);	//????

	// Write the GenericDataHeader to the file
	GenericDataHeaderWriter gdhWriter;
	gdhWriter.Write(fileStream, gdh);


	//
	// Data Cube
	//

	int offset = fileStream.tellp();

	// Write the DataSetHeader
	DataSetWriter dphWriter(&fileStream, &dph);
	dphWriter.WriteHeader();

	// Write out the data
	for( int32_t i=0; i < rows; ++i )
	{
		u_int16_t value = (u_int16_t)(i*10+i);
		FileOutput::WriteUInt16(fileStream, value);
	}

	// write the offset
	fileStream.seekp(offsetLocation);
	FileOutput::WriteUInt32(fileStream, offset);

	fileStream.close();

}
开发者ID:，项目名称:，代码行数:68，代码来源:

示例5: CreateResultFile

/*
 * Create a results file with the CEL file header and other parameters.
 */
void CopyNumberResultWriter::CreateResultFile(affymetrix_fusion_io::FusionCELData& cel, const std::string& fileName)
{
    try
    {
        // Create the results file with the header.
        CHPMultiDataData *data = new CHPMultiDataData(fileName);
        data->SetEntryCount(CopyNumberMultiDataType, numberProbeSets, maxProbeSetNameLength[CopyNumberMultiDataType], columns);
		if (numberCytoRegions > 0)
			data->SetEntryCount(CytoMultiDataType, numberCytoRegions, maxProbeSetNameLength[CytoMultiDataType],cytoRegionColumns);
		if (numberGenotypeProbeSets > 0)
			data->SetEntryCount(GenotypeMultiDataType, numberGenotypeProbeSets, maxProbeSetNameLength[GenotypeMultiDataType], genotypeColumns);
        data->SetAlgName(StringUtils::ConvertMBSToWCS(algName));
        data->SetAlgVersion(StringUtils::ConvertMBSToWCS(algVersion));
        data->SetArrayType(cel.GetChipType());
        GenericDataHeader *gdh = data->GetFileHeader()->GetGenericDataHdr();
        ParameterNameValueType param;
        param.SetName(PROGRAM_NAME);
        param.SetValueText(StringUtils::ConvertMBSToWCS(programName));
        gdh->AddNameValParam(param);
        param.SetName(L"program-version");
        param.SetValueText(StringUtils::ConvertMBSToWCS(programVersion));
        gdh->AddNameValParam(param);
        param.SetName(PROGRAM_COMPANY);
        param.SetValueText(StringUtils::ConvertMBSToWCS(programCompany));
        gdh->AddNameValParam(param);
        ParameterNameValueTypeList params = algParams;
        param.SetName(L"ArraySet");
        param.SetValueText(cel.GetChipType());
        params.push_back(param);
        data->AddAlgParams(params);
        data->AddSummaryParams(summaryParams);
        DataSetHeader *dsh = data->GetDataSetHeader(CopyNumberMultiDataType);
        for (ParameterNameValueTypeList::iterator it=chrStartStop.begin(); it!=chrStartStop.end(); it++)
            dsh->AddNameValParam(*it);
        GenericData *gdata = cel.GetGenericData();
        if (gdata != NULL)
            gdh->AddParent(*gdata->Header().GetGenericDataHdr());
        CHPMultiDataFileWriter *writer = new CHPMultiDataFileWriter(*data);
        delete writer;
        delete data;

        // Create a buffer writer object
        outputFiles.clear();
        outputFiles.push_back(fileName);
        vector<MultiDataType> dataTypes;
        dataTypes.push_back(CopyNumberMultiDataType);
		if (numberCytoRegions > 0)
			dataTypes.push_back(CytoMultiDataType);
		if (numberGenotypeProbeSets > 0)
			dataTypes.push_back(GenotypeMultiDataType);
        bufferWriter = new CHPMultiDataFileBufferWriter();
        bufferWriter->Initialize(&outputFiles, dataTypes, maxProbeSetNameLength);
    }
    catch (CalvinException &ex)
    {
        string err = "Error creating the output file: " + fileName;
        wstring msg = ex.ToString();
        if (msg.empty() == false)
            err += " " + StringUtils::ConvertWCSToMBS(msg);
        throw err;
    }
    catch (...)
    {
        string err = "Error creating the output file: " + fileName;
        throw err;
    }
}
开发者ID:，项目名称:，代码行数:70，代码来源:


注：本文中的DataSetHeader::AddNameValParam方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。