本文整理汇总了C++中DataDefnBlk::CheckBoxBtn方法的典型用法代码示例。如果您正苦于以下问题:C++ DataDefnBlk::CheckBoxBtn方法的具体用法?C++ DataDefnBlk::CheckBoxBtn怎么用?C++ DataDefnBlk::CheckBoxBtn使用的例子?那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类DataDefnBlk
的用法示例。
在下文中一共展示了DataDefnBlk::CheckBoxBtn方法的9个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: BuildDataDefn
void PL_SoftStSp::BuildDataDefn(DataDefnBlk & DDB)
{
DDB.Byte("Mode", "", DC_, "", &iMode, this, isParm, DDBPmpStartMode);
DDB.Byte("FwdRevMode", "", DC_, "", &iFwdRev, this, isParm, DDBFwdRevMode );
switch (iMode)
{
case 0:
DDB.CheckBoxBtn("Enable", "Run", DC_, "", &bOn, this, isParm, DDBOnOff);
DDB.CheckBoxBtn("Invert", "", DC_, "", &bStartInv,this, isParm, DDBOnOff);
break;
case 1:
case 2:
DDB.CheckBoxBtn("Permissive", "", DC_, "", &bOn, this, isParm, DDBOnOff);
DDB.CheckBoxBtn("Start", "", DC_, "", &bStart, this, isParm, DDBOnOff);
DDB.CheckBoxBtn("Stop", "", DC_, "", &bStop, this, isParm, DDBOnOff);
DDB.CheckBoxBtn("StartInvert","", DC_, "", &bStartInv,this, isParm, DDBOnOff);
DDB.CheckBoxBtn("StopInvert", "", DC_, "", &bStopInv, this, isParm, DDBOnOff);
break;
}
if (iFwdRev==PLSS_FwdRevLogic)
DDB.CheckBoxBtn("Reverse", "", DC_, "", &bRunRev, this, isParm, DDBOnOff);
DDB.CheckBoxBtn("Running", "", DC_, "", &bRunning, this, 0, DDBOnOff);
DDB.CheckBoxBtn("Tripped", "", DC_, "", &bTripped, this, isParm, DDBOnOff);
DDB.Double("StartTime", "StrtTime", DC_Time, "s", &dStartTime, this, isParm);
DDB.Double("StopTime", "StopTime", DC_Time, "s", &dStopTime, this, isParm);
DDB.Double("LocalY", "Manual", DC_Frac, "%", &m_dManualSpeed, this, isParm|NAN_OK);
DDB.Double("Required", "Reqd", DC_Frac, "%", &m_dSpeedReqd, this, isParm);
DDB.Double("Actual", "Actual", DC_Frac, "%", &m_dSpeed, this, isResult|0);
DDB.Double("", "Regulated", DC_Frac, "%", &m_dSpeedReg, this, isResult);
DDB.Double("MapLo", "", DC_Frac, "%", &dMapLo, this, isParm);
DDB.Double("MapHi", "", DC_Frac, "%", &dMapHi, this, isParm);
DDB.Double("MapSpeed", "", DC_Frac, "%", &m_dMapSpeed, this, isResult|0);
DDB.Bool ("LoSpeed", "", DC_, "", &bLoSpeed, this, isResult);
DDB.Bool ("HiSpeed", "", DC_, "", &bHiSpeed, this, isResult);
DDB.Float ("LoSpeedLimit", "", DC_Frac, "%", &dLoSpeedLimit,this, isParm|InitHidden);
DDB.Float ("HiSpeedLimit", "", DC_Frac, "%", &dHiSpeedLimit,this, isParm|InitHidden);
DDB.CheckBoxBtn("AutoReStart", "", DC_, "", &m_bAutoRestart, this, isParm, DDBOnOff);
DDB.Byte("FailMode", "", DC_, "", &iFailMode, this, isParm, DDBPmpFailMode);
DDB.CheckBoxBtn("RunMemory", "", DC_, "", &bRunMemory, this, InitHidden, DDBOnOff);
//if (m_pPwr)
// m_pPwr->BuildDataDefn(DDB);
};
示例2: BuildDataDefn
void FlashTank::BuildDataDefn(DataDefnBlk &DDB)
{
DDB.BeginStruct(this);
DDB.Double ("Pressure", "P", DC_P, "kPag", xidPMean, this, 0);
DDB.Double ("Temperature", "T", DC_T, "C", xidTemp, this, 0);
DDB.Double ("Density", "Rho", DC_Rho, "kg/m^3", xidRho, this, 0);
DDB.Double ("Level", "Lvl", DC_Frac, "%", xidLevel, this, 0);
DDB.Text ("Datum");
DDB.Double ("Datum", "Z", DC_L , "m", &dDatum, this, isResult|0 | DYNMODE);
DDB.Double ("Datum_Rqd", "Z_Rqd",DC_L , "m", &dDatum_Rqd, this, isParmStopped | DYNMODE|NAN_OK);
DDB.Text (" ");
DDB.Double ("POffset", "", DC_DP, "kPa", &POffset, this, 0);
DDB.Text ("");
DDB.CheckBoxBtn("Closed", "", DC_ , "", xidClosed, this,
isParmStopped|(!gs_Environment.OK() ? noView|noFile|noSnap|noScenario:0) , DDBYesNo);
DDB.CheckBoxBtn("Networked", "", DC_ , "", xidNetPressDamp, this,
isParmStopped|(!gs_Environment.OK() || !Contents.Closed() ? noView|noFile|noSnap|noScenario:0) , DDBYesNo);
VLE.Add_OnOff(DDB);
VLE.BuildDataDefn(DDB, NULL, NULL, DDB_RqdPage, 0);
if (SolveMode()==DYNMODE)
{
DDB.Object(&Contents, this, NULL, NULL, DDB_RqdPage);
DDB.Object(&PresetImg, this, NULL, NULL, DDB_RqdPage);
}
DDB.Page("IOs");
Strng Commnt, Nm;
for (int i=0; i<NoFlwIOs(); i++)
{
Nm.Set("IO_%02i", i);
DDB.Double(Nm(), "", DC_Qm , "kg/s", xidIO_Qm0+i, this, 0);
#ifndef UsingZTagObj
DDB.VolatileTags(Nm(), Nm());
#endif
Commnt.Set("%s", Nd_Rmt(i)->FullObjTag());
DDB.TagComment(Commnt());
}
DDB.Double("IO_Sigma", "", DC_Qm , "kg/s", xidIO_QmSigma, this, 0);
DDB.EndStruct();
};
示例3: BuildDataDefn
void CIsolator::BuildDataDefn(DataDefnBlk & DDB)
{
DDB.BeginStruct(this, "CIsolator", NULL, DDB_NoPage);
DDB.Text("");
DDB.Long ("TermCfg", "", DC_, "", xidTSCfg, this, isParm, DDBCTTypes);
DDB.CheckBoxBtn("On", "", DC_, "", &m_bOn, this, isParm);
DDB.Double ("HeatLoad", "", DC_Pwr, "W", xidHtLoad, this, isResult);
DDB.Text("");
m_tsPwrIn.BuildDataDefn(DDB, 1, true);
m_tsPwrOut.BuildDataDefn(DDB, 2, true);
DDB.EndStruct();
}
示例4: BuildDataDefn
void CSzSSA::BuildDataDefn(DataDefnBlk & DDB)
{
// DDB.CheckBox("SetSAM", "", DC_, "", &m_bSetSAM, this, m_bSAMCalcd ? 0 : isParm);
if (DDB.BeginStruct(this, "SSA", 0))
{
DDB.Byte ("", "Method", DC_, "", &m_iMethod, this, 0/*isParm*/, DDBMeth);
DDB.Visibility(NSHM_All ,m_iMethod==SSA_Independent);
if (!DDB.ForFileSnpScn())
DDB.CheckBoxBtn("SetData", "", DC_, "", xidSSAAllowSet, this, isParm);
DDB.Long ("", "Solids", DC_, "", &m_iSolids, this, (m_bHasPSD || !DataSettable()) ? 0 : isParm, SDB.DDBSolSpListDash());
DDB.Visibility();
DDB.Double ("SeedSurfAreaM", "SAM", DC_SurfAreaM, "m^2/g", xidSSAPartSAM, this, (m_bHasPSD || !DataSettable()) ? 0 : isParm);
DDB.Double ("SeedSurfAreaL", "SAL", DC_SurfAreaL, "m^2/L", xidSSAPartSAL, this, noFile);
DDB.Double ("#/s", "", DC_, "", xidSSAPartNoperSec, this, noFile|InitHidden);
DDB.Double ("#/L", "", DC_, "", xidSSAPartNoperVol, this, noFile|InitHidden);
DDB.Double ("PartDiam", "D", DC_L, "um", xidSSAPartDiam, this, ((m_bHasPSD || !DataSettable()) ? 0 : isParm)|noFile);
DDB.Double ("SolidsQm", "", DC_Qm, "kg/s", xidSSAPartSolidsQm, this, noFile|InitHidden);
}
DDB.EndStruct();
}
示例5: BuildDataDefn
void CActuator::BuildDataDefn(DataDefnBlk & DDB)
{
DDB.BeginStruct(this, "CActuator", NULL, DDB_NoPage);
DDB.Text("");
DDB.CheckBoxBtn("On", "", DC_, "", &bOn, this, isParmStopped, DDBYesNo);
DDB.CheckBoxBtn("ShowCnv", "", DC_, "", &bWithCnvComment,this, isParmStopped, DDBYesNo);
DDB.Visibility();
DDB.Long("", "Ac_Cnt", DC_, "", idmCount, this, isParmStopped/*|AffectsStruct*/);
DDB.Text("");
if (m_DataBlk.GetSize()>0)
{
DDB.Button("Check_tags", "", DC_, "", idmCheckBtn, this, isParmStopped);
DDB.Text("");
DDB.String("State", "", DC_, "", &m_StateLine[0], this, noSnap|noFile);
DDB.Text("Error:");
DDB.String("Msg_1", "", DC_, "", &m_StateLine[1], this, noSnap|noFile);
DDB.String("Msg_2", "", DC_, "", &m_StateLine[2], this, noSnap|noFile);
DDB.Text("");
}
DDB.Text("----------------------------------------");
static DDBValueLst DDBFail[]={
{Fail_None, "None" },
{Fail_Hold, "Hold" },
{Fail_Hold|Fail_Noise, "Hold,Noise" },
{Fail_MinVal, "MinVal" },
{Fail_MaxVal, "MaxVal" },
{Fail_LoVal, "LoVal" },
{Fail_HiVal, "HiVal" },
{Fail_MinVal|Fail_Ramp, "MinVal,Ramp" },
{Fail_MaxVal|Fail_Ramp, "MaxVal,Ramp" },
{Fail_LoVal|Fail_Ramp, "LoVal,Ramp" },
{Fail_HiVal|Fail_Ramp, "HiVal,Ramp" },
{Fail_MinVal|Fail_Noise, "MinVal,Noise" },
{Fail_MaxVal|Fail_Noise, "MaxVal,Noise" },
{Fail_LoVal|Fail_Noise, "LoVal,Noise" },
{Fail_HiVal|Fail_Noise, "HiVal,Noise" },
{Fail_MinVal|Fail_Ramp|Fail_Noise, "MinVal,Ramp,Noise"},
{Fail_MaxVal|Fail_Ramp|Fail_Noise, "MaxVal,Ramp,Noise"},
{Fail_LoVal|Fail_Ramp|Fail_Noise, "LoVal,Ramp,Noise" },
{Fail_HiVal|Fail_Ramp|Fail_Noise, "HiVal,Ramp,Noise" },
{0}};
static DDBValueLst DDBXForms[]={
{XF_None, "None" },
{XF_Linear, "Linear" },
//{XF_Sqr, "Sqr" },
//{XF_Sqrt, "Sqrt" },
{0}};
static DDBValueLst DDBFilters[]={
{Flt_None, "None" },
{Flt_FirstOrder, "FirstOrder" },
{0}};
static DDBValueLst DDBRawXLates[]={
{XL_None, "None" },
{XL_AtoD, "AtoD" },
{XL_Linear, "Linear" },
//{XL_PulseEncode "PulseWidth" },
{0}};
char Buff[128];
Strng Tag;
if (DDB.BeginArray(this, "Cfg", "Ac_Cfg", m_DataBlk.GetSize()))
{
for (int i=0; i<m_DataBlk.GetSize(); i++)
{
if (1)// i>0 && (i % 2)==1)
{
sprintf(Buff, "%d", i);
DDB.Page(Buff, DDB_OptPage);
}
DDB.BeginElement(this, i);
CActuatorBlk * T = m_DataBlk[i];
Strng CnvTxt;
if (bWithCnvComment && XRefsValid() && T->m_bValid)
GetValidCnvTxt(T->m_OutputVar, CnvTxt);
DDB.String("ID", "", DC_, "", idmCfgTags+(i*NoOfCfgTags)+1, this, isParmStopped|isTag);
DDB.String("OutputTag", "", DC_, "", idmCfgTags+(i*NoOfCfgTags)+2, this, isParmStopped|isTag);
//DDB.Double("RequiredValue", "ReqdVal", DC_, "", &T->m_dReqdValue, this, isResult|noFileAtAll);
DDB.Double("RequiredValue", "Rqd", DC_, "", &T->m_dReqdValue, this, isResult|noFileAtAll);
if (CnvTxt.Len())
DDB.TagComment(CnvTxt());
// DDB.Byte ("Transform", "", DC_, "", &T->m_Xform.m_iType, this, isParm|SetOnChange, DDBXForms);
// DDB.Visibility(NSHM_All, T->m_Xform.m_iType);
// DDB.Float ("Xf.Factor", "", DC_, "", &T->m_Xform.m_dFactor, this, isParm);
// DDB.Float ("Xf.Bias", "", DC_, "", &T->m_Xform.m_dBias, this, isParm);
//
// DDB.Visibility();
//
// DDB.Byte ("Filter", "", DC_, "", &T->m_Flt.m_iType, this, isParm|SetOnChange, DDBFilters);
// DDB.Visibility(NSHM_All, T->m_Flt.m_iType == Flt_FirstOrder);
// DDB.Float ("Flt.TimeConst", "Flt.Tau", DC_Time, "s", &T->m_Flt.m_dTau, this, isParm);
// DDB.Double("Flt.PrevValue", "", DC_, "", &T->m_Flt.m_dPrevValue, this, InitHidden);
// DDB.Visibility();
//
// DDB.Byte ("Fail.Mode", "", DC_, "", &T->m_Fail.m_iType, this, isParm|SetOnChange, DDBFail);
// DDB.Float ("Fail.LoValue", "", DC_, "", &T->m_Fail.m_dLoValue, this, isParm);
// DDB.Float ("Fail.HiValue", "", DC_, "", &T->m_Fail.m_dHiValue, this, isParm);
// DDB.Float ("Fail.NoiseStdDev", "", DC_, "%", &T->m_Fail.m_dNoiseStdDevFrac, this, isParm);
// DDB.Float ("Fail.SlewTime", "", DC_Time, "s", &T->m_Fail.m_dSlewTime, this, isParm);
//
//.........这里部分代码省略.........
示例6: BuildDataDefn
//.........这里部分代码省略.........
DDB.Long ("NSections", "", DC_, "", xidNSections, this, isResult);
if (DDB.BeginStruct(this, "MinSect", 0, DDB_NoPage))
{
DDB.Double ("Length", "", DC_Frac, "%", &m_Q.m_dMinFracSectLen, this, isParm);
DDB.Visibility(NM_Dynamic|SM_All|HM_All, m_Q.m_dMinFracSectLen>0);
DDB.Double ("LoadTol", "", DC_Frac, "%", &m_Q.m_dLoadTol, this, isParm);
DDB.Double ("TempTol", "", DC_Frac, "%", &m_Q.m_dTempTol, this, isParm);
DDB.Double ("MFracTol", "", DC_Frac, "%", &m_Q.m_dMFracTol, this, isParm);
}
DDB.EndStruct();
DDB.Text("");
BuildDataDefnShowIOs(DDB);
if (m_WtMtrPos.GetSize())
{
DDB.Page("WtMtrs", DDB_RqdPage);
if (DDB.BeginArray(this, "WtMtr", "WtMtr", m_WtMtrPos.GetSize(), 0))
{
for (int i=0; i<m_WtMtrPos.GetSize(); i++)
if (DDB.BeginElement(this, i))
{
DDB.Double("Pos", "", DC_L , "m", xidWtrMtrPos0+i, this, isParm);
DDB.Double("Loading", "", DC_MpL, "kg/m", xidWtrMtrLd0+i, this, isResult|0);
DDB.Double("Rate", "", DC_Qm, "kg/s", xidWtrMtrRate0+i, this, isResult|0);
DDB.Text("");
}
}
DDB.EndArray();
}
int FdLst[MaxIOList], PrLst[MaxIOList];
int nFd=0, nPr=0;
for (int i=0; i<NoFlwIOs(); i++)
if (IOId_Self(i)==idFeed)
FdLst[nFd++]=i;
else if (IOId_Self(i)==idProd)
PrLst[nPr++]=i;
int DoOld=((!DDB.ForFiling() && !DDB.ForSnapShot() && !DDB.ForScenario() && !DDB.ForView()) ||
(DDB.ForFiling() && DDB.DoingPutData()));
Strng Nm;
DDB.Page("Feeds", DDB_RqdPage);
if (DDB.BeginArray(this, "Fd", "BltCnvFd", nFd, 0))
for (i=0; i<nFd; i++)
if (DDB.BeginElement(this, Nd_Rmt(FdLst[i])->FullObjTag()))
{
DDB.Double ("Pos", "", DC_L , "m", xidFeedPos0+i, this, isParm);
DDB.Visibility(NM_Dynamic|SM_All|HM_All);
DDB.CheckBoxBtn("Limited", "", DC_, "", xidFeedLimited0+i, this, isParm);
DDB.Visibility(NM_Dynamic|SM_All|HM_All, m_Q.FeedLimited(i));
DDB.Double ("Capacity", "", DC_Frac, "%", xidFeedCapFrac0+i, this, isParm);
DDB.Visibility();
DDB.Double ("Qm", "", DC_Qm , "kg/s", xidFeedQm0+i, this, 0);
DDB.Text("");
if (DoOld)
{
DDB.BeginElement(this, i);
DDB.Double("Pos", "", DC_L , "m", xidFeedPos0+i, this, isParm);
DDB.Double("Qm", "", DC_Qm , "kg/s", xidFeedQm0+i, this, 0);
}
}
DDB.EndArray();
DDB.Page("Products", DDB_RqdPage);
if (DDB.BeginArray(this, "Pr", "BltCnvPr", nPr, 0))
for (i=0; i<nPr; i++)
if (DDB.BeginElement(this, Nd_Rmt(PrLst[i])->FullObjTag()))
{
DDB.Double("Pos", "", DC_L , "m", xidProdPos0+i, this, isParm);
DDB.Double("Removal","", DC_Frac , "%", xidProdRemove0+i, this, isParm);
DDB.Double("Qm", "", DC_Qm , "kg/s", xidProdQm0+i, this, 0);
DDB.Double("Loss", "", DC_Qm , "kg/s", xidProdLoss0+i, this, 0);
DDB.Text("");
if (DoOld)
{
DDB.BeginElement(this, i);
//DDB.TagComment(Nd_Rmt(PrLst[i])->FullObjTag());
//DDB.BeginElement(this, Nd_Rmt(PrLst[i])->FullObjTag());
DDB.Double("Pos", "", DC_L , "m", xidProdPos0+i, this, isParm);
DDB.Double("Removal","", DC_Frac , "%", xidProdRemove0+i, this, isParm);
DDB.Double("Qm", "", DC_Qm , "kg/s", xidProdQm0+i, this, 0);
DDB.Double("Loss", "", DC_Qm , "kg/s", xidProdLoss0+i, this, 0);
}
}
DDB.EndArray();
if (m_fShowProfile)
DDB.Object(&m_Q.Profile(), this);
//BuildDataDefnAreaIOs(DDB);
DDB.EndStruct();
};
示例7: BuildDataDefn
/*This provides access to the variables of the model and calls the
BuildDataDefn for objects used by the model.*/
void DuctUnit::BuildDataDefn(DataDefnBlk & DDB)
{
DDB.BeginStruct(this);
DDB.Visibility();
BuildDataDefnElevation(DDB);
DDB.Double ("Pressure", "P", DC_P, "kPag", xidPMean, this, noFile|noSnap);
DDB.Double ("Temperature", "T", DC_T, "C", xidTemp, this, noFile|noSnap);
DDB.Double ("Density", "Rho", DC_Rho, "kg/m^3", xidRho, this, noFile|noSnap);
DDB.Double ("Level", "Lvl", DC_Frac, "%", xidLevel, this, noFile|noSnap);
DDB.Double ("Mass_Accum", "QmAcc", DC_Qm, "kg/s", &m_QmAcc, this, noFile|noSnap);
DDB.Double ("Vol_Accum", "QvAcc", DC_Qv, "L/s", &m_QvAcc, this, noFile|noSnap);
//DDB.Text ("");
//DDB.Visibility(NM_Probal|SM_All|HM_All|SSMODE);
//DDB.Double ("FlashSplit", "", DC_Frac, "%", &FlashSplit, this, 0);
//DDB.Double ("SS_Lvl", "", DC_Frac, "%", &SS_Lvl, this, isParm);
DDB.Visibility();
DDB.Text ("");
DDB.CheckBoxBtn("Closed", "", DC_ , "", xidClosed, this,
isParmStopped|(!gs_Environment.HasGas() ? noView|noFile|noSnap|noScenario:0) , DDBYesNo);
DDB.CheckBoxBtn("NetPressDamping", "", DC_ , "", xidNetPressDamp, this,
isParmStopped|(!gs_Environment.HasGas() || !Contents.Closed() ? noView|noFile|noSnap|noScenario:0) , DDBYesNo);
GSM.Add_OnOff(DDB);
m_VLE.Add_OnOff(DDB);
m_HX.Add_OnOff(DDB);
m_RB.Add_OnOff(DDB);
BuildDataDefnElevation(DDB);
DDB.Text("");
DDB.Visibility();
DDB.Double ("RqdTOut", "", DC_T, "C", &dRqdTOut, this, isParm|SetOnChange|NAN_OK);
DDB.Double ("RqddT", "", DC_dT, "C", &dRqddT, this, isParm|SetOnChange|NAN_OK);
DDB.Visibility(NM_Dynamic|SM_All|HM_All, Valid(dRqddT));
DDB.Double ("RqdTOutMin", "", DC_T, "C", &dRqdTOutMin, this, isParm);
DDB.Double ("RqdTOutMax", "", DC_T, "C", &dRqdTOutMax, this, isParm);
DDB.Visibility(NM_Dynamic|SM_All|HM_All, Valid(dRqddT)||Valid(dRqdTOut));
DDB.Double ("TInLowest", "", DC_T, "C", &dTInLowest, this, isParm);
DDB.Double ("TInHighest", "", DC_T, "C", &dTInHighest, this, isParm);
DDB.Visibility(NM_Dynamic|SM_All|HM_All, !Valid(dRqddT)&&!Valid(dRqdTOut));
DDB.Double ("AmbientTemp", "", DC_T, "C", &dAmbientTemp, this, isParm);
DDB.Double ("HeatLoss", "", DC_HCapF,"kJ/dC/s", &dHeatXferCoeff, this, isParm);
DDB.Double ("StructMass", "", DC_M, "kg", &dStructMass, this, isParm);
DDB.Double ("StructTemp", "", DC_T, "C", &dStructTemp, this, isParm);
DDB.Double ("StructCp", "", DC_CpMs, "kJ/kg.C", &dStructCp, this, isParm);
DDB.Visibility();
DDB.Double ("RqdH2OVapFrac", "", DC_Frac, "%", &dRqdH2OVapFrac, this, isParm);
DDB.Double ("HeatLossRate", "", DC_Pwr, "kW", &dHeatLossRate, this, 0);
DDB.Double ("QmSink", "", DC_Qm, "kg/s", &dQmSink, this, 0);
DDB.Double ("QmSinkMeas", "", DC_Qm, "kg/s", &dQmSinkMeas, this, NAN_OK);
DDB.Double ("QmSinkTau", "", DC_Time, "s", &dQmSinkTau, this, isParm);
// QmSink=0.0;
// QmSinkTau=3.0;
DDB.Text("");
BuildDataDefnIOOptions(DDB);
DDB.Text("");
DDB.Visibility();
BuildDataDefnShowIOs(DDB);
m_HX.BuildDataDefn(DDB, NULL, NULL, DDB_RqdPage, 0);
m_RB.BuildDataDefn(DDB);
m_VLE.BuildDataDefn(DDB);
GSM.BuildDataDefn(DDB);
if (NetDynamicMethod())
{
DDB.Object(&Contents, this, NULL, NULL, DDB_RqdPage);
DDB.Object(&m_PresetImg, this, NULL, NULL, DDB_RqdPage);
}
//if (Contents.SpillExists())
// DDB.Object(&Contents.OverFlow(), this, NULL, NULL, DDB_RqdPage);
//DDB.Object(&OverFlow, this, NULL, DDB_RqdPage);
DDB.EndStruct();
};
示例8: BuildDataDefn
void FilterPress::BuildDataDefn(DataDefnBlk & DDB)
{
DDB.BeginStruct(this);
DDB.Visibility(SM_Buffered|HM_All);
BuildDataDefnElevation(DDB);
DDB.Visibility();
DDB.Text ("");
static DDBValueLst DDB0[]={
{FSM_SolToFiltFrac, "SolidsToFiltrateFraction"},
{FSM_FiltSolConc, "FiltrateConcentration"},
{0}};
DDB.Text ("Requirements");
DDB.Byte ("Filtrate_Method", "Method", DC_, "", &iRqdFiltMethod, this, isParm|AffectsStruct, DDB0);
DDB.Visibility(NSHM_All, (iRqdFiltMethod == FSM_SolToFiltFrac));
if (PrjFileVerNo()<48)
DDB.Double ("", "RqdFiltSolids", DC_Frac, "%", &RqdSolidsToFiltrate,this, isParm);
else
DDB.Double ("Rqd_Solids_To_Filtrate", "RqdSolToFilt", DC_Frac, "%", &RqdSolidsToFiltrate,this, isParm);//SolidLoss
DDB.Visibility(NSHM_All, (iRqdFiltMethod == FSM_FiltSolConc));
DDB.Double ("Rqd_FiltrateSolidsConc25","RqdFiltSolConc25",DC_Conc, "g/L", &RqdFiltSolConc, this, isParm);
DDB.Visibility();
DDB.Double ("Solids_To_FiltrateUsed", "SolToFiltUsed", DC_Frac, "%", &SolidsToFiltUsed, this, isResult|InitHidden);//|noView);
DDB.Double ("Rqd_Cake_Moisture", "RqdCakeMoist", DC_Frac, "%", &RqdCakeMoist, this, isParm);
DDB.Double ("Rqd_Wash_Efficiency", "RqdWashEff", DC_Frac, "%", &RqdWashEff, this, isParm);
DDB.Text ("Results");
DDB.Double ("Wash_Efficiency", "WashEff", DC_Frac, "%", &ActWashEff, this, isResult);//|noFile|noSnap);
DDB.Double ("Cake_Solids", "CakeSolids", DC_Frac, "%", &ActCakeSolids, this, isResult);//|noFile|noSnap);
DDB.Double ("Filtrate_Solids", "FiltSolids", DC_Frac, "%", &ActFiltSolids, this, isResult);//|noFile|noSnap);
DDB.Double ("[email protected]", "CakeSolConc25", DC_Conc, "g/L", &ActCakeSolConc, this, isResult);//|noFile|noSnap);
DDB.Double ("[email protected]", "FiltSolConc25", DC_Conc, "g/L", &ActFiltSolConc, this, isResult);//|noFile|noSnap);
//DDB.Double ("[email protected]", "[email protected]", DC_Conc, "g/L", &ActFiltSolConcT, this, isResult);//|noFile|noSnap|InitHidden);
//DDB.Byte ("", "ScanEffSpecie", DC_, "", &iScanEffSpecie, this, isParm, SDB.DDBLiqSpList());
//DDB.Double ("Scandrett_Wash_Eff", "ScandrettEff", DC_Frac, "%", &ActScandrettEff, this, isResult);//|noFile|noSnap);
DDB.Byte ("", "WashComp", DC_, "", &iWashEffSpecie, this, isParm, SDB.DDBLiqSpList());
DDB.Double ("", "CompWashEff", DC_Frac, "%", &dSpWashEff, this, isResult);//|noFile|noSnap);
DDB.Text (" ");
DDB.CheckBox("TrackStatus", "", DC_, "", &bTrackStatus, this, isParm);
DDB.Visibility(SM_Buffered|HM_All);
DDB.Text (" ");
DDB.CheckBoxBtn("", "Filtrate2Washing", DC_, "", &fFilt2Washings, this, isParm, DDBYesNo);
DDB.CheckBoxBtn("", "CakeDisch", DC_, "", &fDischarge, this, isParm, DDBYesNo);
DDB.Text (" ");
DDB.Double ("", "Press_Drop", DC_DP, "kPa", &FilterDP, this, isResult|0);
DDB.Double ("", "MembraneRes", DC_MembDP, "kPa.s/m", &MembDP, this, isParm);
DDB.Double ("", "Viscosity", DC_Visc, "cP", &LiqVisc, this, isParm);
DDB.Double ("", "SpecCakeResistance", DC_SpCakeRes, "m/kg", &SpCakeRes, this, isParm);
DDB.Double ("", "Area", DC_Area, "m^2", &FiltArea, this, isParm);
if (SolveSurgeMethod())
DDB.Object(&m_Cake, this, NULL, NULL, DDB_RqdPage);
DDB.Visibility();
DDB.Text ("");
BuildDataDefnShowIOs(DDB);
//BuildDataDefnAreaIOs(DDB);
DDB.EndStruct();
}
示例9: BuildDataDefn
/*#F:This provides access to the variables of the model.*/
void X_Tie::BuildDataDefn(DataDefnBlk & DDB)
{
DDB.BeginStruct(this);
DDB.Text ("");
DDB.Double ("Pressure", "P", DC_P, "kPag", xidPMean, this, isResult|0);
DDB.Visibility(NM_Dynamic|SM_All|HM_All);
DDB.Double ("PressureEst", "PEst", DC_P, "kPag", xidPEstMean, this, isResult|0);
DDB.Text ("");
BuildDataDefnElevation(DDB);
DDB.Visibility(NM_Probal|SM_All|HM_All);
DDB.Text ("");
long PBOpts= (m_VLE.Enabled() ? (PC_BasicPB & ~PC_SatP):PC_BasicPB);
long DynOpts= (m_VLE.Enabled() ? (PC_BasicDyn & ~PC_SatP):PC_BasicDyn);
m_PCtrl0.BuildDataDefn(DDB, this, NetProbalMethod(), PBOpts, DynOpts);//PC_Atmos|PC_Reqd);
DDB.Visibility();
if (NetDynamicMethod())
{
DDB.Text("");
DDB.CheckBoxBtn("NetworkIsolator", "", DC_, "", xidNetworkIsolator, this, isParmStopped|SetOnChange|AffectsStruct);
}
if (!m_NetworkIsolator)
{
m_BlkEval.Add_OnOff(DDB);
if (PrjFileVerNo()<97 && (DDB.DoingPutData() && DDB.ForFileSnpScn() || 0))
{
DDB.Text("");
m_RB.Add_OnOff(DDB);
m_EHX.Add_OnOff(DDB);
}
DDB.Visibility(SM_Buffered|HM_All);
m_Leak.Add_OnOff(DDB,0,100);
DDB.Visibility();
GSM.Add_OnOff(DDB);
DDB.CheckBox("ShowQFeed", "", DC_, "", &m_bShowQFeed, this, isParm|SetOnChange);
DDB.CheckBox("ShowQProd", "", DC_, "", &m_bShowQProd, this, isParm|SetOnChange);
}
#if XREFTEST
DDB.CheckBox("TagIOTest", "", DC_, "", &m_bTestTagIO, this, isParm|SetOnChange);
#endif
DDB.Text("");
BuildDataDefnShowIOs(DDB);
BuildDataDefnIOOpts(DDB);
if (m_NetworkIsolator)
{
DDB.Visibility();
DDB.Object(m_Accumulator, this, NULL, NULL, DDB_RqdPage);
if (m_bShowQFeed)
DDB.Object(&m_QFeed, this, NULL, NULL, DDB_RqdPage);
m_QProd(); // ensure exists
if (m_QProd.Exists())
{
DDB.Visibility(NSHM_All, m_bShowQProd);
DDB.Object(&m_QProd, this, NULL, NULL, DDB_RqdPage);
DDB.Visibility();
}
}
else //if (1)//NetProbalMethod())
{
DDB.Text("");
m_BlkEval.BuildDataDefn(DDB);
GSM.BuildDataDefn(DDB);
m_QFeed(); // ensure exists
if (m_QFeed.Exists())
{
DDB.Visibility(NSHM_All, m_bShowQFeed);
DDB.Object(&m_QFeed, this, NULL, NULL, DDB_RqdPage);
DDB.Visibility();
}
m_QProd(); // ensure exists
if (m_QProd.Exists())
{
DDB.Visibility(NSHM_All, m_bShowQProd);
DDB.Object(&m_QProd, this, NULL, NULL, DDB_RqdPage);
DDB.Visibility();
}
}
//BuildDataDefnAreaIOs(DDB);
DDB.EndStruct();
};