C++ CHeaderData::setId方法代码示例

本文整理汇总了C++中CHeaderData::setId方法的典型用法代码示例。如果您正苦于以下问题：C++ CHeaderData::setId方法的具体用法？C++ CHeaderData::setId怎么用？C++ CHeaderData::setId使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类CHeaderData的用法示例。

在下文中一共展示了CHeaderData::setId方法的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: clock

void CVersionUnit::clock(unsigned int ms)
{
	m_timer.clock(ms);

	if (m_status == VS_WAIT && m_timer.hasExpired()) {
		m_timer.stop();

		// RPT1 and RPT2 will be filled in later
		CHeaderData header;
		header.setMyCall1(m_callsign);
		header.setMyCall2(wxT("VERS"));
		header.setYourCall(wxT("CQCQCQ  "));
		header.setId(m_id);

		m_handler->process(header, DIR_INCOMING, AS_VERSION);

		m_out    = 0U;
		m_status = VS_TRANSMIT;

		m_time.Start();

		return;
	}

	if (m_status == VS_TRANSMIT) {
		unsigned int needed = m_time.Time() / DSTAR_FRAME_TIME_MS;

		while (m_out < needed) {
			CAMBEData* data = m_data[m_out];
			data->setId(m_id);

			m_out++;

			m_handler->process(*data, DIR_INCOMING, AS_VERSION);

			if (m_out == NUM_FRAMES) {
				m_out    = 0U;
				m_status = VS_IDLE;
				return;
			}
		}

		return;
	}
}

开发者ID:KH6VM，项目名称:OpenSystemFusion，代码行数:45，代码来源:VersionUnit.cpp

示例2: send


//.........这里部分代码省略.........
			dataOut->setSeq(i);

			unsigned char buffer[DV_FRAME_LENGTH_BYTES];
			::memcpy(buffer + 0U, NULL_AMBE_DATA_BYTES, VOICE_FRAME_LENGTH_BYTES);

			// Insert sync bytes when the sequence number is zero, slow data otherwise
			if (i == 0U) {
				::memcpy(buffer + VOICE_FRAME_LENGTH_BYTES, DATA_SYNC_BYTES, DATA_FRAME_LENGTH_BYTES);
				m_encoder.sync();
			} else {
				m_encoder.getTextData(buffer + VOICE_FRAME_LENGTH_BYTES);
			}

			dataOut->setData(buffer, DV_FRAME_LENGTH_BYTES);

			m_data[m_in] = dataOut;
			m_in++;
		}

		CAMBEData* dataOut = new CAMBEData;
		dataOut->setData(END_PATTERN_BYTES, DV_FRAME_LENGTH_BYTES);
		dataOut->setDestination(m_address, G2_DV_PORT);
		dataOut->setSeq(0U);
		dataOut->setEnd(true);

		m_data[m_in] = dataOut;
		m_in++;
	}

	if (m_in == 0U) {
		wxLogWarning(wxT("Not sending, no audio files loaded"));
		return false;
	}

	if (!m_callsignA.IsEmpty()) {
		header.setRptCall2(m_callsignA);
		header.setId(idA);
		sendHeader(header);
	}

	if (!m_callsignB.IsEmpty()) {
		header.setRptCall2(m_callsignB);
		header.setId(idB);
		sendHeader(header);
	}

	if (!m_callsignC.IsEmpty()) {
		header.setRptCall2(m_callsignC);
		header.setId(idC);
		sendHeader(header);
	}

	if (!m_callsignD.IsEmpty()) {
		header.setRptCall2(m_callsignD);
		header.setId(idD);
		sendHeader(header);
	}

	unsigned int out = 0U;

	wxStopWatch timer;
	timer.Start();

	for (;;) {
		unsigned int needed = timer.Time() / DSTAR_FRAME_TIME_MS;

		while (out < needed) {
			CAMBEData* data = m_data[out];
			m_data[out] = NULL;
			out++;

			if (!m_callsignA.IsEmpty()) {
				data->setId(idA);
				sendData(*data);
			}

			if (!m_callsignB.IsEmpty()) {
				data->setId(idB);
				sendData(*data);
			}

			if (!m_callsignC.IsEmpty()) {
				data->setId(idC);
				sendData(*data);
			}

			if (!m_callsignD.IsEmpty()) {
				data->setId(idD);
				sendData(*data);
			}

			delete data;

			if (m_in == out)
				return true;
		}

		::wxMilliSleep(10UL);
	}
}

开发者ID:BackupTheBerlios，项目名称:opendv-svn，代码行数:101，代码来源:TimeServerThread.cpp

示例3: run

bool CAPRSTransmit::run()
{
	//First see if the packet is Icom supported...
	CAPRSPacket aprsPacket;
	if(!CAPRSParser::Parse(m_text, aprsPacket)){
		wxLogWarning(wxT("Unsupported APRS Format, ignoring => ") + m_text.Trim(true));
		return false;
	}

	wxString textWithCRC(aprsPacket.Raw());
	wxLogMessage(wxT("Supported APRS Format => ") + textWithCRC.Trim(true));
	//add nececessary stuff to text, but keep it the original
	textWithCRC.Replace(wxT("\n"), wxEmptyString);
	if(!textWithCRC.EndsWith(wxT("\r"))) textWithCRC.Append(wxT("\r"));
	wxString crc = wxString::Format(wxT("$$CRC%04X,"), calcCRC(textWithCRC));
	textWithCRC.Prepend(crc);

	bool opened = m_socket.open();
	if (!opened)
		return false;

	in_addr address = CUDPReaderWriter::lookup(wxT("127.0.0.1"));

	unsigned int id = CHeaderData::createId();

	wxString callsignG = m_repeaterCallsign.Left(LONG_CALLSIGN_LENGTH - 1U);
	callsignG.Append(wxT("G"));

	CHeaderData header;
	header.setId(id);
	header.setMyCall1(m_APRSCallsign);
	header.setMyCall2(wxT("APRS"));
	header.setRptCall1(callsignG);
	header.setRptCall2(m_repeaterCallsign);
	header.setYourCall(wxT("CQCQCQ  "));
	header.setDestination(address, G2_DV_PORT);

	sendHeader(header);

	CSlowDataEncoder encoder;
	encoder.setHeaderData(header);
	encoder.setGPSData(textWithCRC);
	encoder.setTextData(wxT("APRS to DPRS"));

	CAMBEData data;
	data.setDestination(address, G2_DV_PORT);
	data.setId(id);

	wxStopWatch timer;
	timer.Start();

	unsigned int out = 0U;
        unsigned int dataOut = 0U;
	unsigned int needed = (encoder.getInterleavedDataLength() / (DATA_FRAME_LENGTH_BYTES)) * 2U;

	while (dataOut < needed) {
		data.setSeq(out);

		unsigned char buffer[DV_FRAME_LENGTH_BYTES];
		::memcpy(buffer + 0U, NULL_AMBE_DATA_BYTES, VOICE_FRAME_LENGTH_BYTES);

		// Insert sync bytes when the sequence number is zero, slow data otherwise
		if (out == 0U) {
			::memcpy(buffer + VOICE_FRAME_LENGTH_BYTES, DATA_SYNC_BYTES, DATA_FRAME_LENGTH_BYTES);
		} else {
			encoder.getInterleavedData(buffer + VOICE_FRAME_LENGTH_BYTES);		
			dataOut++;
		}

		data.setData(buffer, DV_FRAME_LENGTH_BYTES);

		sendData(data);
		out++;

		if (out == 21U) out = 0U;
	}

	data.setData(END_PATTERN_BYTES, DV_FRAME_LENGTH_BYTES);
	data.setSeq(out >= 21U ? 0U : out);
	data.setEnd(true);

	sendData(data);

	m_socket.close();

	return true;
}

开发者ID:dl5di，项目名称:OpenDV，代码行数:87，代码来源:APRSTransmit.cpp

示例4: Entry

void* CDRATSServer::Entry()
{
	wxLogMessage(wxT("Starting the D-RATS Server thread for %s"), m_callsign.c_str());

	bool sending = false;
	unsigned int id = 0U;

	unsigned char seqNo = 0U;
	unsigned int  sent = 0U;

	wxStopWatch time;

	try {
		while (!m_stopped) {
			serviceSocket();

			if (m_readEnd && !sending) {
				id = CHeaderData::createId();

				// Write header
				CHeaderData header;
				header.setMyCall1(m_callsign);
				header.setMyCall2(wxT("DATA"));
				header.setYourCall(wxT("CQCQCQ  "));
				header.setId(id);

#if defined(LOOPBACK)
				writeHeader(header);
#else
				m_handler->process(header, DIR_INCOMING, AS_DRATS);
#endif

				m_readState = SS_FIRST;
				m_readPos   = 0U;
				sending     = true;
				seqNo       = 0U;
				sent        = 0U;

				time.Start();
			}

			if (m_readEnd && sending) {
				unsigned int needed = time.Time() / DSTAR_FRAME_TIME_MS;

				while (sent < needed && sending) {
					// Write AMBE data
					CAMBEData data;
					data.setId(id);

					unsigned char buffer[DV_FRAME_LENGTH_BYTES];
					::memcpy(buffer + 0U, NULL_AMBE_DATA_BYTES, VOICE_FRAME_LENGTH_BYTES);

					// Insert sync bytes when the sequence number is zero, slow data otherwise
					if (seqNo == 0U) {
						::memcpy(buffer + VOICE_FRAME_LENGTH_BYTES, DATA_SYNC_BYTES, DATA_FRAME_LENGTH_BYTES);
						m_readState = SS_FIRST;
					} else {
						if (m_readState == SS_FIRST) {
							unsigned char readText[3U];
							::memset(readText, 'f', 3U);

							unsigned int length = m_readLength - m_readPos;
							unsigned char bytes = 5U;
							if (length < 5U)
								bytes = length;

							readText[0U] = SLOW_DATA_TYPE_GPS | bytes;

							for (unsigned int i = 0U; i < 2U && m_readPos < m_readLength; i++)
								readText[i + 1U] = m_readBuffer[m_readPos++];

							readText[0U] ^= SCRAMBLER_BYTE1;
							readText[1U] ^= SCRAMBLER_BYTE2;
							readText[2U] ^= SCRAMBLER_BYTE3;

							::memcpy(buffer + VOICE_FRAME_LENGTH_BYTES, readText, DATA_FRAME_LENGTH_BYTES);

							m_readState = SS_SECOND;
						} else {
							unsigned char readText[3U];
							::memset(readText, 'f', 3U);

							for (unsigned int i = 0U; i < 3U && m_readPos < m_readLength; i++)
								readText[i] = m_readBuffer[m_readPos++];

							readText[0U] ^= SCRAMBLER_BYTE1;
							readText[1U] ^= SCRAMBLER_BYTE2;
							readText[2U] ^= SCRAMBLER_BYTE3;

							::memcpy(buffer + VOICE_FRAME_LENGTH_BYTES, readText, DATA_FRAME_LENGTH_BYTES);				

							m_readState = SS_FIRST;
						}
					}

					data.setSeq(seqNo);
					data.setData(buffer, DV_FRAME_LENGTH_BYTES);
					sent++;

#if defined(LOOPBACK)
//.........这里部分代码省略.........

开发者ID:EA3HKB，项目名称:OpenDV，代码行数:101，代码来源:DRATSServer.cpp

注：本文中的CHeaderData::setId方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。