本文整理汇总了C++中CCommsDbTableView::ReadTextL方法的典型用法代码示例。如果您正苦于以下问题:C++ CCommsDbTableView::ReadTextL方法的具体用法?C++ CCommsDbTableView::ReadTextL怎么用?C++ CCommsDbTableView::ReadTextL使用的例子?那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类CCommsDbTableView
的用法示例。
在下文中一共展示了CCommsDbTableView::ReadTextL方法的10个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: TPtrC
TInt CCommDbTest036_03::executeStepL()
{
CCommsDbTemplateRecord* templateRecord = CCommsDbTemplateRecord::NewL(iTheDb, TPtrC(MODEM_BEARER));
CleanupStack::PushL(templateRecord);
User::LeaveIfError(templateRecord->Modify());
TBufC<KCommsDbSvrMaxFieldLength> inputString = _L("string");
templateRecord->WriteTextL(TPtrC(COMMDB_NAME), _L("DummyName"));
templateRecord->WriteTextL(TPtrC(MODEM_PORT_NAME), inputString);
User::LeaveIfError(templateRecord->StoreModifications());
CleanupStack::PopAndDestroy(templateRecord);
//Create a view on the modem table, make a new record and check the value is the one set for the template
CCommsDbTableView* tableView = iTheDb->OpenTableLC(TPtrC(MODEM_BEARER));
TUint32 dummyId;
//Create a new record, so we can be sure it is the same as the templated one
User::LeaveIfError(tableView->InsertRecord(dummyId));
tableView->WriteTextL(TPtrC(COMMDB_NAME), _L("NewModem"));
User::LeaveIfError(tableView->PutRecordChanges());
//Retrieve the string we set for the template
TBuf<KCommsDbSvrMaxFieldLength> retrievedString;
tableView->ReadTextL(TPtrC(MODEM_PORT_NAME), retrievedString);
CleanupStack::PopAndDestroy(tableView);
if(retrievedString!=inputString)
return KErrGeneral;
return KErrNone;
}
示例2: SetLocalIpAddrL
/**
* Function that takes an IP address from user input, accesses the
* Bluetooth PAN Profile table in the CommDb and updates the IpAddr
* field with the supplied address.
*/
void CPanConnections::SetLocalIpAddrL(TUint32 addr)
{
iLocalIpAddr = addr;
iSrcAddr.SetAddress(iLocalIpAddr);
CCommsDatabase* db = CCommsDatabase::NewL();
CleanupStack::PushL(db);
// Get the LAN service table
CCommsDbTableView* tableView = db->OpenTableLC(TPtrC(LAN_SERVICE));
TBuf<KMaxBufferSize> tableName;
TInt err = tableView->GotoFirstRecord();
if(err == KErrNone)
{
// Get the name of the table
tableView->ReadTextL(TPtrC(COMMDB_NAME), tableName);
if(tableName == TPtrC(_S("BluetoothPANProfile")))
{
TInetAddr tempAddr;
TBuf<KMaxBufferSize> dispBuf;
tempAddr.SetAddress(iLocalIpAddr);
tempAddr.Output(dispBuf);
User::LeaveIfError(tableView->UpdateRecord());
tableView->WriteTextL(_L("IpAddr"), dispBuf);
User::LeaveIfError(tableView->PutRecordChanges());
User::LeaveIfError(db->CommitTransaction());
}
}
else
{
User::Leave(KErrNotFound);
}
CleanupStack::PopAndDestroy(2);//db & tableView
}
示例3: ResolveIapL
// ---------------------------------------------------------------------------
// TIap::ResolveIapL
// ---------------------------------------------------------------------------
//
TInt TIap::ResolveIapL( RArray<TIap>& aIapArray )
{
RDebug::Print( _L("TEST PRINT: CTestAppConsole::ResolveIapL -start\n") );
TBuf<40> name;
TUint32 iapid;
CCommsDatabase* db = CCommsDatabase::NewL( EDatabaseTypeIAP );
CleanupStack::PushL( db );
CCommsDbTableView* view = db->OpenTableLC( TPtrC( IAP ) );
TInt res = view->GotoFirstRecord();
if ( res != KErrNone )
{
CleanupStack::PopAndDestroy( 2 ); // db, view
RDebug::Print( _L("TEST PRINT: CTestAppConsole::ResolveIapL -end err: %d\n"), res );
return res;
}
while ( res == KErrNone )
{
view->ReadTextL( TPtrC( COMMDB_NAME ), name );
view->ReadUintL( TPtrC( COMMDB_ID ), iapid );
aIapArray.AppendL( TIap( iapid, name ) );
res = view->GotoNextRecord();
}
CleanupStack::PopAndDestroy( 2 ); // db, view
RDebug::Print( _L("TEST PRINT: CTestAppConsole::ResolveIapL -end" ) );
return KErrNone;
}
示例4: GetGPRSIAPsFromIAPTableL
void CSymTorrentIAPSelectView::GetGPRSIAPsFromIAPTableL()
{
TBuf<52> iapfromtable;
TBuf<53> listItem;
TInt err = KErrNone;
CCommsDatabase* commsDB = CCommsDatabase::NewL(EDatabaseTypeIAP);
CleanupStack::PushL(commsDB);
// Open IAP table using the GPRS as the bearer.
CCommsDbTableView* gprsTable = commsDB->OpenIAPTableViewMatchingBearerSetLC(ECommDbBearerGPRS,
ECommDbConnectionDirectionOutgoing);
// Point to the first entry
User::LeaveIfError(gprsTable->GotoFirstRecord());
gprsTable->ReadTextL(TPtrC(COMMDB_NAME), iapfromtable);
listItem.SetLength(0);
listItem.Append(_L("\t"));
listItem.Append(iapfromtable);
iContainer->AppendItemL(listItem);
TUint32 id;
gprsTable->ReadUintL(TPtrC(COMMDB_ID), id);
User::LeaveIfError(iIAPIDs.Append(id));
while (err = gprsTable->GotoNextRecord(), err == KErrNone)
{
gprsTable->ReadTextL(TPtrC(COMMDB_NAME), iapfromtable);
listItem.SetLength(0);
listItem.Append(_L("\t"));
listItem.Append(iapfromtable);
iContainer->AppendItemL(listItem);
TUint32 id;
gprsTable->ReadUintL(TPtrC(COMMDB_ID), id);
User::LeaveIfError(iIAPIDs.Append(id));
}
CleanupStack::PopAndDestroy(); // gprsTable
CleanupStack::PopAndDestroy(); // commsDB
}
示例5: UpdateIAPListL
EXPORT_C void CPodcastModel::UpdateIAPListL()
{
iIapNameArray->Reset();
iIapIdArray.Reset();
CCommsDbTableView* table = iCommDB->OpenTableLC (TPtrC (IAP));
TInt ret = table->GotoFirstRecord ();
TPodcastIAPItem IAPItem;
TBuf <KCommsDbSvrMaxFieldLength> bufName;
while (ret == KErrNone) // There was a first record
{
table->ReadUintL(TPtrC(COMMDB_ID), IAPItem.iIapId);
table->ReadTextL (TPtrC(COMMDB_NAME), bufName);
table->ReadTextL (TPtrC(IAP_BEARER_TYPE), IAPItem.iBearerType);
table->ReadTextL (TPtrC(IAP_SERVICE_TYPE), IAPItem.iServiceType);
iIapIdArray.Append(IAPItem);
iIapNameArray->AppendL(bufName);
ret = table->GotoNextRecord();
}
CleanupStack::PopAndDestroy(); // Close table
}
示例6: LockWLANAccessPointsL
// -----------------------------------------------------------------------------
// CCommsDatEnforcement::LockWLANAccessPointsL()
// -----------------------------------------------------------------------------
//
void CCommsDatEnforcement::LockWLANAccessPointsL( TBool aLockValue )
{
RDEBUG_2("CCommsDatEnforcement::LockAccessPoint( %d )", aLockValue );
//Get WLAN service table and get ServiceID--> which is nothing but IAP ID and lock that record
//TBool ret = EFalse;
TUint32 apIAPID = 0;
CCommsDbTableView* checkView;
CCommsDatabase* commsDataBase = CCommsDatabase::NewL();
CleanupStack::PushL( commsDataBase );
checkView = commsDataBase->OpenTableLC(TPtrC(IAP));
RDEBUG(" -> After opening IAP table ");
TBuf<KCommsDbSvrMaxFieldLength> serviceType;
TInt error = checkView->GotoFirstRecord();
RDEBUG(" -> After going to first record ");
while (error == KErrNone)
{
RDEBUG(" -> KERRNONE ");
// Get the ID and check for service type
checkView->ReadTextL(TPtrC(IAP_SERVICE_TYPE), serviceType);
if(serviceType == TPtrC(LAN_SERVICE))
{
checkView->ReadUintL(TPtrC(COMMDB_ID), apIAPID);
RDEBUG_2(" ->found %d WLAN AP. being protected or unprotected", apIAPID );
if(aLockValue)
{
((CCommsDbProtectTableView*)checkView)->ProtectRecord();
RDEBUG(" -> WLAN AP protected successfully!");
}
else
{
((CCommsDbProtectTableView*)checkView)->UnprotectRecord();
RDEBUG(" -> WLAN AP UN protected successfully!");
}
}
error = checkView->GotoNextRecord();
}
CleanupStack::PopAndDestroy(); // checkView
CleanupStack::PopAndDestroy( commsDataBase );
}
示例7: ConfigureIAPL
/**
* Function that accesses the PAN Service Table in the CommsDb and configures
* the IAP to the required settings.
*/
void CPanConnections::ConfigureIAPL(TBool aIsListening, TBTDevAddr* aDevAddr, TBool aUsePANNotifier)
{
// Open CommDb and get a view of the PAN service extentions table.
CCommsDatabase* db = CCommsDatabase::NewL();
CleanupStack::PushL(db);
CCommsDbTableView* tableView = db->OpenTableLC(TPtrC(PAN_SERVICE_EXTENSIONS));
TBuf<KMaxBufferSize> tableName;
TInt err = tableView->GotoFirstRecord();
if(err == KErrNone)
{
tableView->ReadTextL(TPtrC(COMMDB_NAME), tableName);
if(tableName == TPtrC(_S("PANServiceExtensionsTable1")))
{
User::LeaveIfError(tableView->UpdateRecord());// Start update
//enable listening mode
tableView->WriteBoolL(TPtrC(PAN_ALLOW_INCOMING),aIsListening);
tableView->WriteBoolL(TPtrC(PAN_DISABLE_SDP_QUERY), 0);
tableView->WriteBoolL(TPtrC(PAN_PROMPT_FOR_REMOTE_DEVICES), aUsePANNotifier);
if(aDevAddr)
{
TBuf<KMaxBufferSize> buf;
aDevAddr->GetReadable(buf);
tableView->WriteTextL(TPtrC(PAN_PEER_MAC_ADDRESSES), buf);
}
else
{
tableView->WriteTextL(TPtrC(PAN_PEER_MAC_ADDRESSES), _L(""));
}
// Finalise changes made.
User::LeaveIfError(tableView->PutRecordChanges());// Finish update
User::LeaveIfError(db->CommitTransaction());
CleanupStack::PopAndDestroy(2); // db & tableView
return;
}
}
User::Leave(KErrNotFound);
}
示例8: PrintIAPL
/**
* Function that will access the PAN service table in the CommDb
* and use the values contained to printout the current state.
*/
void CPanConnections::PrintIAPL()
{
CCommsDatabase* db = CCommsDatabase::NewL();
CleanupStack::PushL(db);
CCommsDbTableView* tableView = db->OpenTableLC(TPtrC(PAN_SERVICE_EXTENSIONS));
TInt err = tableView->GotoFirstRecord();
if(err == KErrNone)
{
// Print the IAP
TUint32 uVal;
TBool bVal;
TBuf<KMaxBufferSize> sVal;
iConsole.Printf(_L("------------------- CURRENT IAP ------------------\n"));
tableView->ReadUintL(TPtrC(PAN_LOCAL_ROLE), uVal);
iConsole.Printf(_L("Local Role: %d, "), uVal);
tableView->ReadUintL(TPtrC(PAN_PEER_ROLE), uVal);
iConsole.Printf(_L("Peer Role: %d\n"), uVal);
tableView->ReadBoolL(TPtrC(PAN_PROMPT_FOR_REMOTE_DEVICES), bVal);
iConsole.Printf(_L("Peer Prompt: %d, "), bVal);
tableView->ReadBoolL(TPtrC(PAN_DISABLE_SDP_QUERY), bVal);
iConsole.Printf(_L("Disable SDP: %d, "), bVal);
tableView->ReadBoolL(TPtrC(PAN_ALLOW_INCOMING), bVal);
iConsole.Printf(_L("Listening: %d\n"), bVal);
tableView->ReadTextL(TPtrC(PAN_PEER_MAC_ADDRESSES), sVal);
iConsole.Printf(_L("Peer MAC Addr: %S\n"), &sVal);
iConsole.Printf(_L("--------------------------------------------------\n"));
CleanupStack::PopAndDestroy(2);
return;
}
User::Leave(KErrNotFound);
}
示例9: SetFixedRoleL
/**
* Function that accesses the PAN Service table in the CommDb
* and applies the appropriate role, this function will be used for
* local or peer as well as the PAN role (U or Gn).
*/
void CPanConnections::SetFixedRoleL(TSide aSide, TUint aRole)
{
if (aSide == ELocalRole)
iLocalRole = aRole;
else
iPeerRole = aRole;
CCommsDatabase* db = CCommsDatabase::NewL();
CleanupStack::PushL(db);
CCommsDbTableView* tableView = db->OpenTableLC(TPtrC(PAN_SERVICE_EXTENSIONS));
TBuf<KMaxBufferSize> tableName;
TInt err = tableView->GotoFirstRecord();
if(err == KErrNone)
{
tableView->ReadTextL(TPtrC(COMMDB_NAME), tableName);
if(tableName == TPtrC(_S("PANServiceExtensionsTable1")))
{
User::LeaveIfError(tableView->UpdateRecord());
if(aSide == ELocalRole)
{
tableView->WriteBoolL(TPtrC(PAN_LOCAL_ROLE), aRole);
}
else
{
tableView->WriteBoolL(TPtrC(PAN_PEER_ROLE), aRole);
}
User::LeaveIfError(tableView->PutRecordChanges());
User::LeaveIfError(db->CommitTransaction());
CleanupStack::PopAndDestroy(2);
return;
}
}
User::Leave(KErrNotFound);
}
示例10: SelectIAP
TInt CConnectionManager::SelectIAP()
{
CArrayFixFlat<TIapData>* iEApList=new (ELeave) CArrayFixFlat<TIapData>(2) ;
TInt stack=0;
// Make listitems. and PUSH it
CAknSinglePopupMenuStyleListBox* list = new(ELeave) CAknSinglePopupMenuStyleListBox;
CleanupStack::PushL(list);
stack++;
// Create popup list and PUSH it.
CAknPopupList* popupList = CAknPopupList::NewL(list,
R_AVKON_SOFTKEYS_OK_CANCEL, AknPopupLayouts::EMenuWindow);
CleanupStack::PushL(popupList);stack++;
CDesCArrayFlat* items = new (ELeave) CDesCArrayFlat(5);
CleanupStack::PushL(items);stack++;
// initialize listbox.
list->ConstructL(popupList, CEikListBox::ELeftDownInViewRect);
list->CreateScrollBarFrameL(ETrue);
list->ScrollBarFrame()->SetScrollBarVisibilityL(CEikScrollBarFrame::EOff,
CEikScrollBarFrame::EAuto);
TBuf<52> iapfromtable;
TInt err = KErrNone;
CCommsDatabase* iCommsDB=CCommsDatabase::NewL(EDatabaseTypeIAP);
CleanupStack::PushL(iCommsDB);stack++;
#ifdef __SERIES60_3X__
CCommsDbTableView* gprsTable = iCommsDB->OpenIAPTableViewMatchingBearerSetLC(
iBearerFilter == EApBearerTypeWLAN
? ECommDbBearerWLAN
: ECommDbBearerGPRS|ECommDbBearerWLAN|ECommDbBearerVirtual,
ECommDbConnectionDirectionOutgoing);
#else
CCommsDbTableView* gprsTable = iCommsDB->OpenIAPTableViewMatchingBearerSetLC(
ECommDbBearerGPRS|ECommDbBearerVirtual,
ECommDbConnectionDirectionOutgoing);
#endif
User::LeaveIfError(gprsTable->GotoFirstRecord());
TInt i=0;
TUint32 id;
TIapData eap;
TInt cur =0; //current value
do
{
gprsTable->ReadTextL(TPtrC(COMMDB_NAME), iapfromtable);
gprsTable->ReadUintL(TPtrC(COMMDB_ID), id);
items->AppendL(iapfromtable);
eap.iIap = id;
eap.iName.Copy(iapfromtable);
iEApList->AppendL(eap);
err = gprsTable->GotoNextRecord();
i++;
}
while (err == KErrNone);
CleanupStack::PopAndDestroy(2); stack--;
// Set listitems.
CTextListBoxModel* model = list->Model();
model->SetItemTextArray(items);
model->SetOwnershipType(ELbmOwnsItemArray);
CleanupStack::Pop();
popupList->SetTitleL(_L("Access Point"));
list->SetListBoxObserver(popupList);
TInt popupOk = popupList->ExecuteLD();
CleanupStack::Pop();
TInt iap=0;
if (popupOk)
{
TInt index = list->CurrentItemIndex();
iap=(*iEApList)[index].iIap;
}
CleanupStack::PopAndDestroy();
iEApList->Reset();
delete iEApList;
return iap;
}