当前位置: 首页>>代码示例>>C++>>正文

C++ CBrush::CreateBrushIndirect方法代码示例

本文整理汇总了C++中CBrush::CreateBrushIndirect方法的典型用法代码示例。如果您正苦于以下问题：C++ CBrush::CreateBrushIndirect方法的具体用法？C++ CBrush::CreateBrushIndirect怎么用？C++ CBrush::CreateBrushIndirect使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类CBrush的用法示例。


在下文中一共展示了CBrush::CreateBrushIndirect方法的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: Draw

void CDrawPoly::Draw(CDC* pDC)
{
	ASSERT_VALID(this);

	CBrush brush;
	if (!brush.CreateBrushIndirect(&m_logbrush))
		return;
	CPen pen;
	if (!pen.CreatePenIndirect(&m_logpen))
		return;

	CBrush* pOldBrush;
	CPen* pOldPen;

	if (m_bBrush)
		pOldBrush = pDC->SelectObject(&brush);
	else
		pOldBrush = (CBrush*)pDC->SelectStockObject(NULL_BRUSH);

	if (m_bPen)
		pOldPen = pDC->SelectObject(&pen);
	else
		pOldPen = (CPen*)pDC->SelectStockObject(NULL_PEN);

	pDC->Polygon(m_points, m_nPoints);

	pDC->SelectObject(pOldBrush);
	pDC->SelectObject(pOldPen);
}
开发者ID:mingpen，项目名称:OpenNT，代码行数:29，代码来源:drawobj.cpp

示例2: Draw

void CEllipse::Draw(CDC *pDC)
{
	if(m_lStatus!=ST_NOMAL) return;

	LOGPEN tPen=m_pen;
	UPtoLP(m_pen.lopnWidth.x,m_pen.lopnWidth.y,&tPen.lopnWidth.x,&tPen.lopnWidth.y);
	CPen pen;
	pen.CreatePenIndirect(&tPen);
	CPen *pOldPen=pDC->SelectObject(&pen);

	CBrush brush;
	brush.CreateBrushIndirect(&m_brush);
	CBrush *pOldBrush=pDC->SelectObject(&brush);
	pDC->SetBkMode(TRANSPARENT);

	long x1,y1,x2,y2;
	x1=m_lx1;
	y1=m_ly1;
	if(m_lx1>m_lx2){
		m_lx1=m_lx2;
		m_lx2=x1;
	}
	if(m_ly1>m_ly2){
		m_ly1=m_ly2;
		m_ly2=y1;
	}
	UPtoLP(m_lx1,m_ly1,&x1,&y1);
	UPtoLP(m_lx2,m_ly2,&x2,&y2);
	pDC->Ellipse(x1,y1,x2,y2);

	pDC->SelectObject(pOldPen);
	pDC->SelectObject(pOldBrush);
}
开发者ID:george-kuo，项目名称:GoSysWare，代码行数:33，代码来源:Ellipse.cpp

示例3: DrawSymbol

void DrawSymbol(CDC *pDC, int x, int y, int length, int width, COLORREF color, DSYMBOL symbol, bool bFill, int angle)
{
	//TRACE("Entering CGraphLine::DrawSymbol\n");
	int l = length;		// velkost krizika
	double PI = 3.1415926535897932384626433832795;

	CPen pen, *pPen;
	pen.CreatePen(PS_SOLID, width, color);
	pPen = pDC->SelectObject(&pen);
	if(symbol == CROSS) {
		pDC->MoveTo(x+l, y);
		pDC->LineTo(x-l, y);
		pDC->MoveTo(x, y+l);
		pDC->LineTo(x, y-l);
		return;
	}
	if(symbol == ARROW) {
		pDC->MoveTo(x, y);
		int xx = int (x + 3*l*cos(angle/10*PI/180)),
			yy = int (y + 3*l*sin(angle/10*PI/180));
		pDC->LineTo(xx, yy);
		return;
	}
	if( (symbol == CIRCLE) || (symbol == RECTANGLE)) {
		LOGBRUSH logBrush;
		if(bFill) {
			logBrush.lbStyle = BS_SOLID;
		}
		else {
			logBrush.lbStyle = BS_HOLLOW;
		}
		logBrush.lbColor = color;
		logBrush.lbHatch = HS_CROSS;

		CBrush brush;
		brush.CreateBrushIndirect(&logBrush);
		CBrush* pOldBrush = (CBrush*)pDC->SelectObject(&brush);
		
		if(symbol == CIRCLE) {
			pDC->Ellipse(x-l, y-l, x+l, y+l);
		}
		
		if(symbol == RECTANGLE) {
			pDC->Rectangle(x-l, y-l, x+l, y+l);
		}
		
		pDC->SelectObject(pOldBrush);
	}
	pDC->SelectObject( pPen );
}
开发者ID:igorcerovsky，项目名称:igirock_werner，代码行数:50，代码来源:Method2D.cpp

示例4: OnMouseMove

void CRectTool::OnMouseMove(_CVIEW* pView, UINT nFlags, CPoint& point)
{
    CDC* pDC = NULL;
    pDC = pView->GetDC();
    if (pDC == NULL) return;
    CMiniCADDoc* pDoc = pView->GetDocument();
    if (pDoc==NULL)return;
    CADGraphics	*pGraphics = &pDoc->m_Graphics;
    CDisplay *pDisplay = pGraphics->m_pDisplay;
    if (pDisplay == NULL) return;

    if (pDoc->m_Graphics.m_GraphicsMode==Layout)
        SetCursor(AfxGetApp()->LoadCursor(IDC_DRAW_B));
    else
        SetCursor(AfxGetApp()->LoadCursor(IDC_DRAW_W));
    if (c_bSnap)
    {
        pDoc->m_Graphics.m_bSnapStatus=true;
        pDoc->m_Graphics.SnapHandle(pDC,point);
    }
    if (c_nDown!=1)
    {
        DeleteDC(pDC->m_hDC);
        return;
    }

    CPen Pen;
    if (!Pen.CreatePen(PS_SOLID, 1, RGB(255,255,255)))
        return;
    CPen* pOldPen = pDC->SelectObject(&Pen);
    LOGBRUSH logBrush;
    logBrush.lbColor = 0;
    logBrush.lbHatch = 0;
    logBrush.lbStyle = BS_NULL;
    CBrush NullBrush;
    NullBrush.CreateBrushIndirect(&logBrush);
    CBrush* pOldBrush = pDC->SelectObject(&NullBrush);
    int oldDrawMode = pDC->SetROP2(R2_XORPEN);
    if (!c_bJustDraw)
        pDC->Rectangle(c_PtDown.x,c_PtDown.y,c_PtOld.x,c_PtOld.y);
    c_bJustDraw = false;
    pDC->Rectangle(c_PtDown.x,c_PtDown.y,point.x,point.y);
    pDC->SetROP2(oldDrawMode);
    pDC->SelectObject(pOldPen);
    pDC->SelectObject(pOldBrush);
    Pen.DeleteObject();

    DeleteDC(pDC->m_hDC);
    CDrawTool::OnMouseMove(pView, nFlags, point);
}
开发者ID:yaoyushun，项目名称:sdcad，代码行数:50，代码来源:RectTool.cpp

示例5: CreateImageList

void CFolderListCtrl::CreateImageList()
{
	CImageList * pImgList = new CImageList;

	pImgList->Create( m_Properties.m_nItemCX, m_Properties.m_nItemCY, ILC_COLOR, 32, 32 );

	CDC * pdcThis = GetDC();
	CDC dcBmp; 
	CBitmap bmpRes;

	dcBmp.CreateCompatibleDC( pdcThis );
	bmpRes.CreateCompatibleBitmap( pdcThis, m_Properties.m_nItemCX, m_Properties.m_nItemCY );

	CBitmap * pbmpOld = static_cast<CBitmap*>(dcBmp.SelectObject( &bmpRes ));
	CRect r( 0, 0, m_Properties.m_nItemCX, m_Properties.m_nItemCY );
	LOGBRUSH lbBackground;

	ReleaseDC( pdcThis );
	lbBackground.lbColor = RGB( 255, 255, 255 );
	lbBackground.lbHatch = 0;
	lbBackground.lbStyle = BS_SOLID;
	
	CBrush brBackground;
	
	brBackground.CreateBrushIndirect( &lbBackground );

	dcBmp.FillRect( r, &brBackground );
	dcBmp.Rectangle( r );
	dcBmp.MoveTo( 0, 0 );
	dcBmp.LineTo( m_Properties.m_nItemCX, m_Properties.m_nItemCY );
	dcBmp.MoveTo( m_Properties.m_nItemCX, 0 );
	dcBmp.LineTo( 0, m_Properties.m_nItemCY );
	dcBmp.SelectObject( pbmpOld );
	dcBmp.DeleteDC();

	if( m_pimlThumbnails )
	{
		for( int i = m_pimlThumbnails->GetImageCount() - 1; i >= 0; i-- )
			m_pimlThumbnails->Remove( i );
		delete m_pimlThumbnails;
	}
	pImgList->Add( &bmpRes, RGB( 0, 0, 0 ) );
	m_pimlThumbnails = pImgList;
	if( m_flvtViewType == flvtThumbnail )
		SetImageList( pImgList, LVSIL_NORMAL );
}
开发者ID:tchv71，项目名称:ScadViewer，代码行数:46，代码来源:FolderListCtrl.cpp

示例6: OnLButtonDown

void CRectTool::OnLButtonDown(_CVIEW * pView, UINT nFlags, CPoint& point)
{
    CDC* pDC = NULL;
    pDC = pView->GetDC();
    if (pDC == NULL) return;
    CMiniCADDoc* pDoc = pView->GetDocument();
    if (pDoc==NULL)return;
    CADGraphics	*pGraphics = &pDoc->m_Graphics;
    CDisplay *pDisplay = pGraphics->m_pDisplay;
    if (pDisplay == NULL) return;

    if (c_nDown==0)
    {
///		c_PtDown=point;
        CPen Pen;
        if (!Pen.CreatePen(PS_SOLID, 1, RGB(255,255,255)))
            return;
        CPen* pOldPen = pDC->SelectObject(&Pen);
        LOGBRUSH logBrush;
        logBrush.lbColor = 0;
        logBrush.lbHatch = 0;
        logBrush.lbStyle = BS_NULL;
        CBrush NullBrush;
        NullBrush.CreateBrushIndirect(&logBrush);
        CBrush* pOldBrush = pDC->SelectObject(&NullBrush);

        int oldDrawMode = pDC->SetROP2(R2_XORPEN);

        pView->m_pTempEntity=new CADPolyline();
        CADPolyline* pPolyline=(CADPolyline*)pView->m_pTempEntity;
        pView->SetProjectLineWidth(pPolyline);
        pPolyline->m_nLayer=pDoc->m_LayerGroup.indexOf(pDoc->m_curLayer);
        pPolyline->m_Closed=true;
        if(c_bSnap && pDoc->m_Graphics.m_bHaveSnap)
        {
            ADPOINT* pPoint=new ADPOINT();
            *pPoint = pDoc->m_Graphics.m_curSnapP;
            pPolyline->m_Point.Add((CObject*)pPoint);
            c_PtDown = pDoc->m_Graphics.DocToClient(pDoc->m_Graphics.m_curSnapP);
            c_PtOld = point;
        } else
        {
            ADPOINT* pPoint=new ADPOINT();
            *pPoint = pDoc->m_Graphics.ClientToDoc(point);
            pPolyline->m_Point.Add((CObject*)pPoint);
            c_PtDown = point;
            c_PtOld = point;
        }
        pDC->Rectangle(point.x,point.y,point.x,point.y);
        pDC->SetROP2(oldDrawMode);
        pDC->SelectObject(pOldPen);
        pDC->SelectObject(pOldBrush);
        Pen.DeleteObject();
    }
    if (c_nDown<2)
        c_nDown++;
    if (c_nDown==2)
    {
        c_nDown=0;
        ADPOINT adPoint;
        if (c_bSnap && pDoc->m_Graphics.m_bHaveSnap)
        {
            adPoint=pDoc->m_Graphics.m_curSnapP;
        } else
        {

            adPoint=pDoc->m_Graphics.ClientToDoc(point);
        }
        CADPolyline* pPolyline=(CADPolyline*)pView->m_pTempEntity;
        ADPOINT* pPoint1=(ADPOINT*)pPolyline->m_Point.GetAt(0);
        ADPOINT* pPoint=new ADPOINT();
        pPoint->x = adPoint.x;
        pPoint->y = pPoint1->y;
        pPolyline->m_Point.Add((CObject*)pPoint);
        pPoint=new ADPOINT();
        *pPoint = adPoint;
        pPolyline->m_Point.Add((CObject*)pPoint);
        pPoint=new ADPOINT();
        pPoint->x = pPoint1->x;
        pPoint->y = adPoint.y;
        pPolyline->m_Point.Add((CObject*)pPoint);
        pDoc->m_Graphics.m_Entities.Add((CObject*)pPolyline);
        pDoc->m_Graphics.DrawGraphics(pDisplay->GetDC(),pView->m_pTempEntity);
        pView->m_pTempEntity=NULL;
        pView->ReBitBlt();
    }
    DeleteDC(pDC->m_hDC);
    //CDrawTool::OnLButtonDown(pView, nFlags, point);
}
开发者ID:yaoyushun，项目名称:sdcad，代码行数:89，代码来源:RectTool.cpp

示例7: OnPaint

void CVideoWnd::OnPaint()
{
	CPaintDC dc(this);

	//WIDTHHEIGHT
	CRect clrect(m_rectWnd);
	clrect.right -= clrect.left;
	clrect.bottom -= clrect.top;
	clrect.left = 0;
	clrect.top = 0;

	int width = clrect.right - clrect.left;
	int height = clrect.bottom - clrect.top;

	CRect cRect(clrect);
	CDC memDC;
	memDC.CreateCompatibleDC(&dc);
	CDC *pDC = &memDC;
	CBitmap NewMemBmp;
	NewMemBmp.CreateCompatibleBitmap(&dc, width, height);
	CBitmap* pOldMemBmp = pDC->SelectObject(&NewMemBmp);
	if (!m_iStatus) {
		pDC->FillSolidRect(0, 0, clrect.Width(), clrect.Height(), RGB(255,255,255));
	} else if (m_ImageBitmap.GetSafeHandle()) {
		m_ImageBitmap.BitBlt(pDC, CPoint(0,0));
	}

	CFont dxfont;
	dxfont.CreateFontIndirect(&m_textfont);
	CFont* oldfont = (CFont *) pDC->SelectObject(&dxfont);

	//Draw Text
	int textlength = m_textstring.GetLength(); //get number of bytes
	pDC->SetBkMode(TRANSPARENT);
	pDC->SetTextColor(m_rgb);
	pDC->DrawText((char *)LPCTSTR(m_textstring), textlength, &m_tracker.m_rect, m_horzalign | DT_VCENTER | DT_WORDBREAK );

	pDC->SelectObject(oldfont);

	if ((m_bBorderYes) && (regionSHAPE == m_regionType)) {
		double rx = cRect.Width() * m_roundrectFactor;
		double ry = cRect.Height() * m_roundrectFactor;
		double rval = (rx > ry) ? ry : rx;

		CPen borderPen;
		borderPen.CreatePen( PS_SOLID , m_borderSize, m_borderColor );
		CPen* oldPen = (CPen *) pDC->SelectObject(&borderPen);

		LOGBRUSH logbrush;
		logbrush.lbStyle = BS_HOLLOW;
		CBrush borderBrush;
		borderBrush.CreateBrushIndirect(&logbrush);
		CBrush* oldBrush = (CBrush *) pDC->SelectObject(&borderBrush);

		int drawOffset = m_borderSize/2;

		if (m_regionPredefinedShape == regionROUNDRECT) {
			pDC->RoundRect(drawOffset-1, drawOffset-1, cRect.Width()-1-drawOffset, cRect.Height()-1-drawOffset, (int) rval, (int) rval);

		} else if (m_regionPredefinedShape == regionELLIPSE) {
			pDC->Ellipse(drawOffset-1,drawOffset-1, cRect.Width()-1-drawOffset, cRect.Height()-1-drawOffset);
		} else if (m_regionPredefinedShape == regionRECTANGLE) {
			pDC->Rectangle(drawOffset-1, drawOffset-1, cRect.Width()-1-drawOffset, cRect.Height()-1-drawOffset);
		}

		pDC->SelectObject(oldBrush);
		pDC->SelectObject(oldPen);
		borderPen.DeleteObject();
		borderBrush.DeleteObject();
	}

	CDC *pWinDC = &dc;
	pWinDC->BitBlt(0,0,clrect.Width(),clrect.Height(),pDC,0,0,SRCCOPY);

	pDC->SelectObject(pOldMemBmp);
	NewMemBmp.DeleteObject();
	memDC.DeleteDC();

	if (m_bTrackingOn) {
		m_tracker.Draw(pWinDC);
	}
}
开发者ID:aisnote，项目名称:camstudio-clone，代码行数:82，代码来源:VideoWnd.cpp


注：本文中的CBrush::CreateBrushIndirect方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。