本文整理汇总了C++中CAMBEData::isSync方法的典型用法代码示例。如果您正苦于以下问题：C++ CAMBEData::isSync方法的具体用法？C++ CAMBEData::isSync怎么用？C++ CAMBEData::isSync使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类CAMBEData的用法示例。
在下文中一共展示了CAMBEData::isSync方法的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: writeData
void CDRATSServer::writeData(const CAMBEData& data)
{
// Sync data isn't sent on
if (data.isSync()) {
m_writeState = SS_FIRST;
return;
}
if (data.isEnd()) {
if (m_writeLength > 0U && m_socket != NULL) {
// CUtils::dump(wxT("From RF"), m_writeBuffer, m_writeLength);
m_socket->write(m_writeBuffer, m_writeLength);
}
m_writeLength = 0U;
return;
}
unsigned char buffer[DV_FRAME_MAX_LENGTH_BYTES];
unsigned int length = data.getData(buffer, DV_FRAME_MAX_LENGTH_BYTES);
if (length != DV_FRAME_LENGTH_BYTES)
return;
unsigned char byte1 = buffer[VOICE_FRAME_LENGTH_BYTES + 0U] ^ SCRAMBLER_BYTE1;
unsigned char byte2 = buffer[VOICE_FRAME_LENGTH_BYTES + 1U] ^ SCRAMBLER_BYTE2;
unsigned char byte3 = buffer[VOICE_FRAME_LENGTH_BYTES + 2U] ^ SCRAMBLER_BYTE3;
switch (m_writeState) {
case SS_FIRST:
m_writeText[0U] = byte1;
m_writeText[1U] = byte2;
m_writeText[2U] = byte3;
m_writeState = SS_SECOND;
return;
case SS_SECOND:
m_writeText[3U] = byte1;
m_writeText[4U] = byte2;
m_writeText[5U] = byte3;
m_writeState = SS_FIRST;
break;
}
if ((m_writeText[0U] & SLOW_DATA_TYPE_MASK) != SLOW_DATA_TYPE_GPS)
return;
length = m_writeText[0U] & 0x07; // Maximum value of 5
if (length > 5U)
length = 5U;
for (unsigned int i = 0U; i < length; i++) {
m_writeBuffer[m_writeLength++] = m_writeText[i + 1U];
// Check for [EOB] in the buffer to signal the end of the D-RATS data.
// To allow strstr() to run correctly
m_writeBuffer[m_writeLength] = 0x00U;
if (::strstr((char*)m_writeBuffer, "[EOB]") != NULL) {
if (m_socket != NULL) {
// CUtils::dump(wxT("From RF"), m_writeBuffer, m_writeLength);
m_socket->write(m_writeBuffer, m_writeLength);
}
m_writeLength = 0U;
}
}
}示例2: writeData
void CAPRSWriter::writeData(const wxString& callsign, const CAMBEData& data)
{
if (data.isEnd())
return;
CAPRSEntry* entry = m_array[callsign];
if (entry == NULL) {
wxLogError(wxT("Cannot find the callsign \"%s\" in the APRS array"), callsign.c_str());
return;
}
CAPRSCollector* collector = entry->getCollector();
if (data.isSync()) {
collector->sync();
return;
}
unsigned char buffer[400U];
data.getData(buffer, DV_FRAME_MAX_LENGTH_BYTES);
bool complete = collector->writeData(buffer + VOICE_FRAME_LENGTH_BYTES);
if (!complete)
return;
if (!m_enabled) {
collector->reset();
return;
}
if (!m_thread->isConnected()) {
collector->reset();
return;
}
// Check the transmission timer
bool ok = entry->isOK();
if (!ok) {
collector->reset();
return;
}
unsigned int length = collector->getData(buffer, 400U);
wxString text((char*)buffer, wxConvLocal, length);
int n = text.Find(wxT(':'));
if (n == wxNOT_FOUND) {
collector->reset();
return;
}
wxString header = text.Left(n);
wxString body = text.Mid(n + 1U);
// If we already have a q-construct, don't send it on
n = header.Find(wxT('q'));
if (n != wxNOT_FOUND)
return;
// Remove the trailing \r
n = body.Find(wxT('\r'));
if (n != wxNOT_FOUND)
body = body.Left(n);
wxString output;
output.Printf(wxT("%s,qAR,%s-%s:%s"), header.c_str(), entry->getCallsign().c_str(), entry->getBand().c_str(), body.c_str());
char ascii[500U];
::memset(ascii, 0x00, 500U);
for (unsigned int i = 0U; i < output.Len(); i++)
ascii[i] = output.GetChar(i);
m_thread->write(ascii);
collector->reset();
}示例3: writeData
void CTextCollector::writeData(const CAMBEData& data)
{
if (data.isSync()) {
sync();
return;
}
unsigned char buffer[DV_FRAME_MAX_LENGTH_BYTES];
data.getData(buffer, DV_FRAME_MAX_LENGTH_BYTES);
switch (m_slowData) {
case SS_FIRST:
m_buffer[0U] = buffer[VOICE_FRAME_LENGTH_BYTES + 0U] ^ SCRAMBLER_BYTE1;
m_buffer[1U] = buffer[VOICE_FRAME_LENGTH_BYTES + 1U] ^ SCRAMBLER_BYTE2;
m_buffer[2U] = buffer[VOICE_FRAME_LENGTH_BYTES + 2U] ^ SCRAMBLER_BYTE3;
m_slowData = SS_SECOND;
return;
case SS_SECOND:
m_buffer[3U] = buffer[VOICE_FRAME_LENGTH_BYTES + 0U] ^ SCRAMBLER_BYTE1;
m_buffer[4U] = buffer[VOICE_FRAME_LENGTH_BYTES + 1U] ^ SCRAMBLER_BYTE2;
m_buffer[5U] = buffer[VOICE_FRAME_LENGTH_BYTES + 2U] ^ SCRAMBLER_BYTE3;
m_slowData = SS_FIRST;
break;
}
switch (m_buffer[0U]) {
case SLOW_DATA_TYPE_TEXT | 0U:
m_data[0U] = m_buffer[1U] & 0x7FU;
m_data[1U] = m_buffer[2U] & 0x7FU;
m_data[2U] = m_buffer[3U] & 0x7FU;
m_data[3U] = m_buffer[4U] & 0x7FU;
m_data[4U] = m_buffer[5U] & 0x7FU;
m_has0 = true;
break;
case SLOW_DATA_TYPE_TEXT | 1U:
m_data[5U] = m_buffer[1U] & 0x7FU;
m_data[6U] = m_buffer[2U] & 0x7FU;
m_data[7U] = m_buffer[3U] & 0x7FU;
m_data[8U] = m_buffer[4U] & 0x7FU;
m_data[9U] = m_buffer[5U] & 0x7FU;
m_has1 = true;
break;
case SLOW_DATA_TYPE_TEXT | 2U:
m_data[10U] = m_buffer[1U] & 0x7FU;
m_data[11U] = m_buffer[2U] & 0x7FU;
m_data[12U] = m_buffer[3U] & 0x7FU;
m_data[13U] = m_buffer[4U] & 0x7FU;
m_data[14U] = m_buffer[5U] & 0x7FU;
m_has2 = true;
break;
case SLOW_DATA_TYPE_TEXT | 3U:
m_data[15U] = m_buffer[1U] & 0x7FU;
m_data[16U] = m_buffer[2U] & 0x7FU;
m_data[17U] = m_buffer[3U] & 0x7FU;
m_data[18U] = m_buffer[4U] & 0x7FU;
m_data[19U] = m_buffer[5U] & 0x7FU;
m_has3 = true;
break;
default:
break;
}
}