C++ AstVar::valuep方法代码示例

    void moveVars() {
	for (vector<AstVar*>::iterator it = m_varps.begin(); it != m_varps.end(); ++it) {
	    AstVar* nodep = *it;
	    if (nodep->valuep()) clearOptimizable(nodep,"HasInitValue");
	    if (!VarFlags(nodep).m_stdFuncAsn) clearStdOptimizable(nodep,"NoStdAssign");
	    VarFlags flags (nodep);
	    if ((nodep->isMovableToBlock() // Blocktemp
		 || !flags.m_notStd)	// Or used only in block
		&& !flags.m_notOpt	// Optimizable
		&& nodep->user1p()) {	// Single cfunc
		// We don't need to test for tracing; it would be in the tracefunc if it was needed
		UINFO(4,"  ModVar->BlkVar "<<nodep<<endl);
		++m_statLocVars;
		AstCFunc* newfuncp = nodep->user1p()->castCFunc();
		nodep->unlinkFrBack();
		newfuncp->addInitsp(nodep);
		// Done
		flags.m_done = true;
		flags.setNodeFlags(nodep);
	    } else {
		clearOptimizable(nodep, "NotDone");
	    }
	}
	m_varps.clear();
    }

void ParamVisitor::visitCell(AstCell* nodep) {
    // Cell: Check for parameters in the instantiation.
    nodep->iterateChildren(*this);
    if (!nodep->modp()) nodep->v3fatalSrc("Not linked?");
    if (nodep->paramsp()
	|| 1  // Need to look for interfaces; could track when one exists, but should be harmless to always do this
	) {
	UINFO(4,"De-parameterize: "<<nodep<<endl);
	// Create new module name with _'s between the constants
	if (debug()>=10) nodep->dumpTree(cout,"-cell:\t");
	// Evaluate all module constants
	V3Const::constifyParamsEdit(nodep);

	// Make sure constification worked
	// Must be a separate loop, as constant conversion may have changed some pointers.
	//if (debug()) nodep->dumpTree(cout,"-cel2:\t");
	string longname = nodep->modp()->name();
	bool any_overrides = false;
	longname += "_";
	if (debug()>8) nodep->paramsp()->dumpTreeAndNext(cout,"-cellparams:\t");
	for (AstPin* pinp = nodep->paramsp(); pinp; pinp=pinp->nextp()->castPin()) {
	    if (!pinp->exprp()) continue; // No-connect
	    AstVar* modvarp = pinp->modVarp();
	    if (!modvarp) {
		pinp->v3error("Parameter not found in sub-module: Param "<<pinp->name()<<" of "<<nodep->prettyName());
	    } else if (!modvarp->isGParam()) {
		pinp->v3error("Attempted parameter setting of non-parameter: Param "<<pinp->name()<<" of "<<nodep->prettyName());
	    } else {
		AstConst* constp = pinp->exprp()->castConst();
		AstConst* origconstp = modvarp->valuep()->castConst();
		if (!constp) {
		    //if (debug()) pinp->dumpTree(cout,"error:");
		    pinp->v3error("Can't convert defparam value to constant: Param "<<pinp->name()<<" of "<<nodep->prettyName());
		    pinp->exprp()->replaceWith(new AstConst(pinp->fileline(), V3Number(pinp->fileline(), modvarp->width(), 0)));
		} else if (origconstp && constp->sameTree(origconstp)) {
		    // Setting parameter to its default value.  Just ignore it.
		    // This prevents making additional modules, and makes coverage more
		    // obvious as it won't show up under a unique module page name.
		} else {
		    longname += "_" + paramSmallName(nodep->modp(),pinp->modVarp())+constp->num().ascii(false);
		    any_overrides = true;
		}
	    }
	}
	IfaceRefRefs ifaceRefRefs;
	for (AstPin* pinp = nodep->pinsp(); pinp; pinp=pinp->nextp()->castPin()) {
	    AstVar* modvarp = pinp->modVarp();
	    if (modvarp->isIfaceRef()) {
		AstIfaceRefDType* portIrefp = modvarp->subDTypep()->castIfaceRefDType();
		//UINFO(9,"     portIfaceRef "<<portIrefp<<endl);
		if (!pinp->exprp()
		    || !pinp->exprp()->castVarRef()
		    || !pinp->exprp()->castVarRef()->varp()
		    || !pinp->exprp()->castVarRef()->varp()->subDTypep()
		    || !pinp->exprp()->castVarRef()->varp()->subDTypep()->castIfaceRefDType()) {
		    pinp->v3error("Interface port '"<<modvarp->prettyName()<<"' is not connected to interface/modport pin expression");
		} else {
		    AstIfaceRefDType* pinIrefp = pinp->exprp()->castVarRef()->varp()->subDTypep()->castIfaceRefDType();
		    //UINFO(9,"     pinIfaceRef "<<pinIrefp<<endl);
		    if (portIrefp->ifaceViaCellp() != pinIrefp->ifaceViaCellp()) {
			UINFO(9,"     IfaceRefDType needs reconnect  "<<pinIrefp<<endl);
			longname += "_" + paramSmallName(nodep->modp(),pinp->modVarp())+paramValueNumber(pinIrefp);
			any_overrides = true;
			ifaceRefRefs.push_back(make_pair(portIrefp,pinIrefp));
		    }
		}
	    }
	}

	if (!any_overrides) {
	    UINFO(8,"Cell parameters all match original values, skipping expansion.\n");
	} else {
	    // If the name is very long, we don't want to overwhelm the filename limit
	    // We don't do this always, as it aids debugability to have intuitive naming.
	    // TODO can use new V3Name hash replacement instead of this
	    string newname = longname;
	    if (longname.length()>30) {
		LongMap::iterator iter = m_longMap.find(longname);
		if (iter != m_longMap.end()) {
		    newname = iter->second;
		} else {
		    newname = nodep->modp()->name();
		    newname += "__pi"+cvtToStr(++m_longId);  // We use all upper case above, so lower here can't conflict
		    m_longMap.insert(make_pair(longname, newname));
		}
	    }
	    UINFO(4,"Name: "<<nodep->modp()->name()<<"->"<<longname<<"->"<<newname<<endl);

	    //
	    // Already made this flavor?
	    AstNodeModule* modp = NULL;
	    ModNameMap::iterator iter = m_modNameMap.find(newname);
	    if (iter != m_modNameMap.end()) modp = iter->second.m_modp;
	    if (!modp) {
		// Deep clone of new module
		// Note all module internal variables will be re-linked to the new modules by clone
		// However links outside the module (like on the upper cells) will not.
		modp = nodep->modp()->cloneTree(false);
		modp->name(newname);
		modp->user5(false); // We need to re-recurse this module once changed
//.........这里部分代码省略.........