本文整理汇总了C++中AliGenPythia::SetJetEtaRange方法的典型用法代码示例。如果您正苦于以下问题：C++ AliGenPythia::SetJetEtaRange方法的具体用法？C++ AliGenPythia::SetJetEtaRange怎么用？C++ AliGenPythia::SetJetEtaRange使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类AliGenPythia的用法示例。
在下文中一共展示了AliGenPythia::SetJetEtaRange方法的1个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: switch
AliGenPythia *PythiaHard(PDC07Proc_t proc) {
//*******************************************************************//
// Configuration file for hard QCD processes generation with PYTHIA //
// //
//*******************************************************************//
AliGenPythia * gener = 0x0;
switch(proc) {
case kPyJetJet:
comment = comment.Append(" pp->jet + jet over at 14 TeV, no restriction");
AliGenPythia * gener = new AliGenPythia(nEvts);
gener->SetEnergyCMS(eCMS);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
gener->SetJetEtaRange(-1.5, 1.5);// Final state kinematic cuts
gener->SetJetPhiRange(0., 360.);
gener->SetJetEtRange(10., 1000.);
gener->SetPtHard(ptHardMin, ptHardMax);// Pt transfer of the hard scattering
gener->SetStrucFunc(kCTEQ4L);
return gener;
case kPyGammaJetPHOS:
comment = comment.Append(" pp->jet + gamma over PHOS");
gener = new AliGenPythia(nEvts);
gener->SetEnergyCMS(eCMS);
gener->SetProcess(kPyDirectGamma);
gener->SetStrucFunc(kCTEQ4L);
gener->SetPtHard(ptHardMin,ptHardMax);
//gener->SetYHard(-1.0,1.0);
gener->SetGammaEtaRange(-0.13,0.13);
gener->SetGammaPhiRange(218.,322.);//Over 5 modules +-2 deg
break;
case kPyJetJetPHOS:
comment = comment.Append(" pp->jet + jet over PHOS");
gener = new AliGenPythia(nEvts);
gener->SetEnergyCMS(eCMS);
gener->SetProcess(kPyJets);
gener->SetStrucFunc(kCTEQ4L);
gener->SetPtHard(ptHardMin,ptHardMax);
//gener->SetYHard(-1.0,1.0);
gener->SetJetEtaRange(-1.,1.);
gener->SetJetPhiRange(200.,340.);
gener->SetPi0InPHOS(kTRUE);
gener->SetFragPhotonOrPi0MinPt(ptGammaPi0Min);
printf("\n \n Event generator: Minimum pT of particle in calorimeter %f \n \n", ptGammaPi0Min);
break;
case kPyGammaBremsPHOS:
comment = comment.Append(" pp->jet + jet+bremsphoton over PHOS at 14 TeV");
gener = new AliGenPythia(nEvts);
gener->SetEnergyCMS(eCMS);
gener->SetProcess(kPyJets);
gener->SetStrucFunc(kCTEQ4L);
gener->SetPtHard(ptHardMin,ptHardMax);
//gener->SetYHard(-1.0,1.0);
gener->SetJetEtaRange(-1.,1.);
gener->SetJetPhiRange(200.,340.);
gener->SetFragPhotonInPHOS(kTRUE);
gener->SetFragPhotonOrPi0MinPt(ptGammaPi0Min);
printf("\n \n Event generator: Minimum pT of particle in calorimeter %f \n \n", ptGammaPi0Min);
break;
case kPyJetJetPHOSv2:
comment = comment.Append(" pp->jet + jet over PHOS version2 ");
gener = new AliGenPythia(nEvts);
gener->SetEnergyCMS(eCMS);
gener->SetProcess(kPyJets);
gener->SetStrucFunc(kCTEQ4L);
gener->SetPtHard(ptHardMin,ptHardMax);
//gener->SetYHard(-1.0,1.0);
gener->SetJetEtaRange(-1.,1.);
gener->SetJetPhiRange(200.,340.);
//gener->SetPi0InPHOS(kTRUE);
gener->SetPhotonInPHOSeta(kTRUE);
gener->SetPhotonMinPt(ptGammaPi0Min);
gener->SetForceDecay(kAll);
break;
case kPyGammaJetEMCAL:
comment = comment.Append(" pp->jet + gamma over EMCAL at 14 TeV");
gener = new AliGenPythia(nEvts);
gener->SetEnergyCMS(eCMS);
gener->SetProcess(kPyDirectGamma);
gener->SetStrucFunc(kCTEQ4L);
gener->SetPtHard(ptHardMin,ptHardMax);
//gener->SetYHard(-1.0,1.0);
gener->SetGammaEtaRange(-0.71,0.71);
gener->SetGammaPhiRange(78.,192.);//Over 6 supermodules +-2 deg
break;
case kPyJetJetEMCAL:
comment = comment.Append(" pp->jet + jet over EMCAL at 14 TeV");
gener = new AliGenPythia(nEvts);
gener->SetEnergyCMS(eCMS);
gener->SetProcess(kPyJets);
gener->SetStrucFunc(kCTEQ4L);
gener->SetPtHard(ptHardMin,ptHardMax);
//gener->SetYHard(-1.0,1.0);
gener->SetJetEtaRange(-1,1);
gener->SetJetPhiRange(60.,210.);
gener->SetPi0InEMCAL(kTRUE);
gener->SetFragPhotonOrPi0MinPt(ptGammaPi0Min);
//.........这里部分代码省略.........