当前位置: 首页>>代码示例>>C++>>正文

C++ xsi_driver_vfirst_trans函数代码示例

本文整理汇总了C++中xsi_driver_vfirst_trans函数的典型用法代码示例。如果您正苦于以下问题：C++ xsi_driver_vfirst_trans函数的具体用法？C++ xsi_driver_vfirst_trans怎么用？C++ xsi_driver_vfirst_trans使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了xsi_driver_vfirst_trans函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: C32_0


//.........这里部分代码省略.........
    t18 = *((unsigned int *)t9);
    t19 = (t17 | t18);
    t20 = (~(t19));
    t21 = (t16 & t20);
    if (t21 != 0)
        goto LAB7;

LAB4:    if (t19 != 0)
        goto LAB6;

LAB5:    *((unsigned int *)t6) = 1;

LAB7:    memset(t4, 0, 8);
    t22 = (t4 + 4U);
    t23 = (t6 + 4U);
    t24 = *((unsigned int *)t23);
    t25 = (~(t24));
    t26 = *((unsigned int *)t6);
    t27 = (t26 & t25);
    t28 = (t27 & 1U);
    if (t28 != 0)
        goto LAB8;

LAB9:    if (*((unsigned int *)t23) != 0)
        goto LAB10;

LAB11:    t29 = (t4 + 4U);
    t30 = *((unsigned int *)t4);
    t31 = *((unsigned int *)t29);
    t32 = (t30 || t31);
    if (t32 > 0)
        goto LAB12;

LAB13:    t35 = *((unsigned int *)t4);
    t36 = (~(t35));
    t37 = *((unsigned int *)t29);
    t38 = (t36 || t37);
    if (t38 > 0)
        goto LAB14;

LAB15:    if (*((unsigned int *)t29) > 0)
        goto LAB16;

LAB17:    if (*((unsigned int *)t4) > 0)
        goto LAB18;

LAB19:    memcpy(t3, t39, 8);

LAB20:    t33 = (t0 + 1660);
    t40 = (t33 + 32U);
    t41 = *((char **)t40);
    t42 = (t41 + 40U);
    t43 = *((char **)t42);
    t44 = (t43 + 4U);
    t45 = 31U;
    t46 = t45;
    t47 = (t3 + 4U);
    t48 = *((unsigned int *)t3);
    t45 = (t45 & t48);
    t49 = *((unsigned int *)t47);
    t46 = (t46 & t49);
    t50 = *((unsigned int *)t43);
    *((unsigned int *)t43) = (t50 & 4294967264U);
    t51 = *((unsigned int *)t43);
    *((unsigned int *)t43) = (t51 | t45);
    t52 = *((unsigned int *)t44);
    *((unsigned int *)t44) = (t52 & 4294967264U);
    t53 = *((unsigned int *)t44);
    *((unsigned int *)t44) = (t53 | t46);
    xsi_driver_vfirst_trans(t33, 0, 4);
    t54 = (t0 + 1616);
    *((int *)t54) = 1;

LAB1:    return;
LAB6:    *((unsigned int *)t6) = 1;
    *((unsigned int *)t7) = 1;
    goto LAB7;

LAB8:    *((unsigned int *)t4) = 1;
    goto LAB11;

LAB10:    *((unsigned int *)t4) = 1;
    *((unsigned int *)t22) = 1;
    goto LAB11;

LAB12:    t33 = (t0 + 564U);
    t34 = *((char **)t33);
    goto LAB13;

LAB14:    t33 = (t0 + 652U);
    t39 = *((char **)t33);
    goto LAB15;

LAB16:    xsi_vlog_unsigned_bit_combine(t3, 5, t34, 5, t39, 5);
    goto LAB20;

LAB18:    memcpy(t3, t34, 8);
    goto LAB20;

}
开发者ID:hesitateYU，项目名称:computer-architecture-lab，代码行数:101，代码来源:m_00000000001129026641_2772510191.c

示例2: Cont_24_2

static void Cont_24_2(char *t0)
{
    char t6[8];
    char *t1;
    char *t2;
    char *t3;
    char *t4;
    char *t5;
    char *t7;
    char *t8;
    char *t9;
    char *t10;
    char *t11;
    char *t12;
    char *t13;
    char *t14;
    unsigned int t15;
    unsigned int t16;
    char *t17;
    unsigned int t18;
    unsigned int t19;
    char *t20;
    unsigned int t21;
    unsigned int t22;
    char *t23;

LAB0:    t1 = (t0 + 2744U);
    t2 = *((char **)t1);
    if (t2 == 0)
        goto LAB2;

LAB3:    goto *t2;

LAB2:    xsi_set_current_line(24, ng0);
    t2 = (t0 + 1748);
    t3 = (t2 + 36U);
    t4 = *((char **)t3);
    t5 = ((char*)((ng1)));
    memset(t6, 0, 8);
    t7 = (t4 + 4);
    if (*((unsigned int *)t7) != 0)
        goto LAB5;

LAB4:    t8 = (t5 + 4);
    if (*((unsigned int *)t8) != 0)
        goto LAB5;

LAB8:    if (*((unsigned int *)t4) > *((unsigned int *)t5))
        goto LAB6;

LAB7:    t10 = (t0 + 3224);
    t11 = (t10 + 32U);
    t12 = *((char **)t11);
    t13 = (t12 + 40U);
    t14 = *((char **)t13);
    memset(t14, 0, 8);
    t15 = 1U;
    t16 = t15;
    t17 = (t6 + 4);
    t18 = *((unsigned int *)t6);
    t15 = (t15 & t18);
    t19 = *((unsigned int *)t17);
    t16 = (t16 & t19);
    t20 = (t14 + 4);
    t21 = *((unsigned int *)t14);
    *((unsigned int *)t14) = (t21 | t15);
    t22 = *((unsigned int *)t20);
    *((unsigned int *)t20) = (t22 | t16);
    xsi_driver_vfirst_trans(t10, 0, 0);
    t23 = (t0 + 3100);
    *((int *)t23) = 1;

LAB1:    return;
LAB5:    t9 = (t6 + 4);
    *((unsigned int *)t6) = 1;
    *((unsigned int *)t9) = 1;
    goto LAB7;

LAB6:    *((unsigned int *)t6) = 1;
    goto LAB7;

}
开发者ID:oncebasun，项目名称:ComputerOrganization，代码行数:82，代码来源:m_00000000003165299285_1409631978.c

示例3: Cont_30_0

static void Cont_30_0(char *t0)
{
    char t3[8];
    char *t1;
    char *t2;
    char *t4;
    unsigned int t5;
    unsigned int t6;
    unsigned int t7;
    unsigned int t8;
    unsigned int t9;
    char *t10;
    char *t11;
    char *t12;
    char *t13;
    char *t14;
    char *t15;
    unsigned int t16;
    unsigned int t17;
    char *t18;
    unsigned int t19;
    unsigned int t20;
    char *t21;
    unsigned int t22;
    unsigned int t23;
    char *t24;

LAB0:    t1 = (t0 + 5248U);
    t2 = *((char **)t1);
    if (t2 == 0)
        goto LAB2;

LAB3:    goto *t2;

LAB2:    xsi_set_current_line(30, ng0);
    t2 = (t0 + 2168U);
    t4 = *((char **)t2);
    memset(t3, 0, 8);
    t2 = (t4 + 4);
    t5 = *((unsigned int *)t2);
    t6 = (~(t5));
    t7 = *((unsigned int *)t4);
    t8 = (t7 & t6);
    t9 = (t8 & 255U);
    if (t9 != 0)
        goto LAB4;

LAB5:    if (*((unsigned int *)t2) != 0)
        goto LAB6;

LAB7:    t11 = (t0 + 7232);
    t12 = (t11 + 56U);
    t13 = *((char **)t12);
    t14 = (t13 + 56U);
    t15 = *((char **)t14);
    memset(t15, 0, 8);
    t16 = 1U;
    t17 = t16;
    t18 = (t3 + 4);
    t19 = *((unsigned int *)t3);
    t16 = (t16 & t19);
    t20 = *((unsigned int *)t18);
    t17 = (t17 & t20);
    t21 = (t15 + 4);
    t22 = *((unsigned int *)t15);
    *((unsigned int *)t15) = (t22 | t16);
    t23 = *((unsigned int *)t21);
    *((unsigned int *)t21) = (t23 | t17);
    xsi_driver_vfirst_trans(t11, 0, 0);
    t24 = (t0 + 7056);
    *((int *)t24) = 1;

LAB1:    return;
LAB4:    *((unsigned int *)t3) = 1;
    goto LAB7;

LAB6:    t10 = (t3 + 4);
    *((unsigned int *)t3) = 1;
    *((unsigned int *)t10) = 1;
    goto LAB7;

}
开发者ID:parkerpatriot，项目名称:space-invaders，代码行数:82，代码来源:m_00000000001396513438_2896073640.c

示例4: Cont_1677_1


//.........这里部分代码省略.........
        goto LAB18;

LAB19:    if (*((unsigned int *)t59) != 0)
        goto LAB20;

LAB21:    t66 = (t58 + 4);
    t67 = *((unsigned int *)t58);
    t68 = (!(t67));
    t69 = *((unsigned int *)t66);
    t70 = (t68 || t69);
    if (t70 > 0)
        goto LAB22;

LAB23:    memcpy(t187, t58, 8);

LAB24:    t215 = (t0 + 9224);
    t216 = (t215 + 56U);
    t217 = *((char **)t216);
    t218 = (t217 + 56U);
    t219 = *((char **)t218);
    memset(t219, 0, 8);
    t220 = 1U;
    t221 = t220;
    t222 = (t187 + 4);
    t223 = *((unsigned int *)t187);
    t220 = (t220 & t223);
    t224 = *((unsigned int *)t222);
    t221 = (t221 & t224);
    t225 = (t219 + 4);
    t226 = *((unsigned int *)t219);
    *((unsigned int *)t219) = (t226 | t220);
    t227 = *((unsigned int *)t225);
    *((unsigned int *)t225) = (t227 | t221);
    xsi_driver_vfirst_trans(t215, 0, 0);
    t228 = (t0 + 9048);
    *((int *)t228) = 1;

LAB1:    return;
LAB4:    *((unsigned int *)t5) = 1;
    goto LAB7;

LAB6:    t12 = (t5 + 4);
    *((unsigned int *)t5) = 1;
    *((unsigned int *)t12) = 1;
    goto LAB7;

LAB8:    t17 = (t0 + 3840U);
    t18 = *((char **)t17);
    memset(t19, 0, 8);
    t17 = (t18 + 4);
    t20 = *((unsigned int *)t17);
    t21 = (~(t20));
    t22 = *((unsigned int *)t18);
    t23 = (t22 & t21);
    t24 = (t23 & 1U);
    if (t24 != 0)
        goto LAB11;

LAB12:    if (*((unsigned int *)t17) != 0)
        goto LAB13;

LAB14:    t27 = *((unsigned int *)t5);
    t28 = *((unsigned int *)t19);
    t29 = (t27 & t28);
    *((unsigned int *)t26) = t29;
    t30 = (t5 + 4);
开发者ID:fordream，项目名称:ZPC_MIPS，代码行数:67，代码来源:m_00000000001358910285_0090163086.c

示例5: Cont_1681_2


//.........这里部分代码省略.........
    if (t11 != 0)
        goto LAB4;

LAB5:    if (*((unsigned int *)t6) != 0)
        goto LAB6;

LAB7:    t13 = (t5 + 4);
    t14 = *((unsigned int *)t5);
    t15 = *((unsigned int *)t13);
    t16 = (t14 || t15);
    if (t16 > 0)
        goto LAB8;

LAB9:    memcpy(t26, t5, 8);

LAB10:    t58 = (t0 + 9288);
    t59 = (t58 + 56U);
    t60 = *((char **)t59);
    t61 = (t60 + 56U);
    t62 = *((char **)t61);
    memset(t62, 0, 8);
    t63 = 1U;
    t64 = t63;
    t65 = (t26 + 4);
    t66 = *((unsigned int *)t26);
    t63 = (t63 & t66);
    t67 = *((unsigned int *)t65);
    t64 = (t64 & t67);
    t68 = (t62 + 4);
    t69 = *((unsigned int *)t62);
    *((unsigned int *)t62) = (t69 | t63);
    t70 = *((unsigned int *)t68);
    *((unsigned int *)t68) = (t70 | t64);
    xsi_driver_vfirst_trans(t58, 0, 0);
    t71 = (t0 + 9064);
    *((int *)t71) = 1;

LAB1:    return;
LAB4:    *((unsigned int *)t5) = 1;
    goto LAB7;

LAB6:    t12 = (t5 + 4);
    *((unsigned int *)t5) = 1;
    *((unsigned int *)t12) = 1;
    goto LAB7;

LAB8:    t17 = (t0 + 3520U);
    t18 = *((char **)t17);
    memset(t19, 0, 8);
    t17 = (t18 + 4);
    t20 = *((unsigned int *)t17);
    t21 = (~(t20));
    t22 = *((unsigned int *)t18);
    t23 = (t22 & t21);
    t24 = (t23 & 1U);
    if (t24 != 0)
        goto LAB11;

LAB12:    if (*((unsigned int *)t17) != 0)
        goto LAB13;

LAB14:    t27 = *((unsigned int *)t5);
    t28 = *((unsigned int *)t19);
    t29 = (t27 & t28);
    *((unsigned int *)t26) = t29;
    t30 = (t5 + 4);
开发者ID:fordream，项目名称:ZPC_MIPS，代码行数:67，代码来源:m_00000000001358910285_0090163086.c

示例6: implSig2_execute

static void implSig2_execute(char *t0)
{
    char t3[8];
    char *t1;
    char *t2;
    char *t4;
    unsigned int t5;
    unsigned int t6;
    unsigned int t7;
    unsigned int t8;
    unsigned int t9;
    char *t10;
    char *t11;
    char *t12;
    char *t13;
    char *t14;
    char *t15;
    unsigned int t16;
    unsigned int t17;
    char *t18;
    unsigned int t19;
    unsigned int t20;
    char *t21;
    unsigned int t22;
    unsigned int t23;
    char *t24;

LAB0:    t1 = (t0 + 8032U);
    t2 = *((char **)t1);
    if (t2 == 0)
        goto LAB2;

LAB3:    goto *t2;

LAB2:    t2 = (t0 + 2328U);
    t4 = *((char **)t2);
    memset(t3, 0, 8);
    t2 = (t4 + 4);
    t5 = *((unsigned int *)t2);
    t6 = (~(t5));
    t7 = *((unsigned int *)t4);
    t8 = (t7 & t6);
    t9 = (t8 & 1U);
    if (t9 != 0)
        goto LAB7;

LAB5:    if (*((unsigned int *)t2) == 0)
        goto LAB4;

LAB6:    t10 = (t3 + 4);
    *((unsigned int *)t3) = 1;
    *((unsigned int *)t10) = 1;

LAB7:    t11 = (t0 + 9072);
    t12 = (t11 + 56U);
    t13 = *((char **)t12);
    t14 = (t13 + 56U);
    t15 = *((char **)t14);
    memset(t15, 0, 8);
    t16 = 1U;
    t17 = t16;
    t18 = (t3 + 4);
    t19 = *((unsigned int *)t3);
    t16 = (t16 & t19);
    t20 = *((unsigned int *)t18);
    t17 = (t17 & t20);
    t21 = (t15 + 4);
    t22 = *((unsigned int *)t15);
    *((unsigned int *)t15) = (t22 | t16);
    t23 = *((unsigned int *)t21);
    *((unsigned int *)t21) = (t23 | t17);
    xsi_driver_vfirst_trans(t11, 0, 0);
    t24 = (t0 + 8480);
    *((int *)t24) = 1;

LAB1:    return;
LAB4:    *((unsigned int *)t3) = 1;
    goto LAB7;

}
开发者ID:tba109，项目名称:xupv5-lx110t-serial_comm，代码行数:80，代码来源:m_00000000003823733578_1082013321.c

示例7: Cont_84_4

static void Cont_84_4(char *t0)
{
    char t7[8];
    char t8[8];
    char *t1;
    char *t2;
    char *t3;
    char *t4;
    char *t5;
    char *t6;
    char *t9;
    char *t10;
    char *t11;
    char *t12;
    char *t13;
    char *t14;
    char *t15;
    char *t16;
    unsigned int t17;
    unsigned int t18;
    char *t19;
    unsigned int t20;
    unsigned int t21;
    char *t22;
    unsigned int t23;
    unsigned int t24;
    char *t25;

LAB0:    t1 = (t0 + 5816U);
    t2 = *((char **)t1);
    if (t2 == 0)
        goto LAB2;

LAB3:    goto *t2;

LAB2:    xsi_set_current_line(84, ng0);
    t2 = (t0 + 3912);
    t3 = (t2 + 56U);
    t4 = *((char **)t3);
    t5 = (t0 + 880);
    t6 = *((char **)t5);
    t5 = ((char*)((ng3)));
    memset(t7, 0, 8);
    xsi_vlog_unsigned_minus(t7, 32, t6, 32, t5, 32);
    memset(t8, 0, 8);
    t9 = (t4 + 4);
    if (*((unsigned int *)t9) != 0)
        goto LAB5;

LAB4:    t10 = (t7 + 4);
    if (*((unsigned int *)t10) != 0)
        goto LAB5;

LAB8:    if (*((unsigned int *)t4) < *((unsigned int *)t7))
        goto LAB7;

LAB6:    *((unsigned int *)t8) = 1;

LAB7:    t12 = (t0 + 6936);
    t13 = (t12 + 56U);
    t14 = *((char **)t13);
    t15 = (t14 + 56U);
    t16 = *((char **)t15);
    memset(t16, 0, 8);
    t17 = 1U;
    t18 = t17;
    t19 = (t8 + 4);
    t20 = *((unsigned int *)t8);
    t17 = (t17 & t20);
    t21 = *((unsigned int *)t19);
    t18 = (t18 & t21);
    t22 = (t16 + 4);
    t23 = *((unsigned int *)t16);
    *((unsigned int *)t16) = (t23 | t17);
    t24 = *((unsigned int *)t22);
    *((unsigned int *)t22) = (t24 | t18);
    xsi_driver_vfirst_trans(t12, 0, 0);
    t25 = (t0 + 6696);
    *((int *)t25) = 1;

LAB1:    return;
LAB5:    t11 = (t8 + 4);
    *((unsigned int *)t8) = 1;
    *((unsigned int *)t11) = 1;
    goto LAB7;

}
开发者ID:cyeehoward，项目名称:NetFPGA-10G_SRAM，代码行数:87，代码来源:m_07986287324637435083_2134149414.c

示例8: Cont_180_1

static void Cont_180_1(char *t0)
{
    char t3[8];
    char *t1;
    char *t2;
    char *t4;
    unsigned int t5;
    unsigned int t6;
    unsigned int t7;
    unsigned int t8;
    unsigned int t9;
    char *t10;
    char *t11;
    char *t12;
    unsigned int t13;
    unsigned int t14;
    unsigned int t15;
    unsigned int t16;
    unsigned int t17;
    unsigned int t18;
    unsigned int t19;
    unsigned int t20;
    char *t21;
    char *t22;
    char *t23;
    char *t24;
    char *t25;
    unsigned int t26;
    unsigned int t27;
    char *t28;
    unsigned int t29;
    unsigned int t30;
    char *t31;
    unsigned int t32;
    unsigned int t33;
    char *t34;

LAB0:    t1 = (t0 + 7256U);
    t2 = *((char **)t1);
    if (t2 == 0)
        goto LAB2;

LAB3:    goto *t2;

LAB2:    xsi_set_current_line(180, ng0);
    t2 = (t0 + 5528U);
    t4 = *((char **)t2);
    memset(t3, 0, 8);
    t2 = (t4 + 4);
    t5 = *((unsigned int *)t2);
    t6 = (~(t5));
    t7 = *((unsigned int *)t4);
    t8 = (t7 & t6);
    t9 = (t8 & 1U);
    if (t9 != 0)
        goto LAB7;

LAB5:    if (*((unsigned int *)t2) == 0)
        goto LAB4;

LAB6:    t10 = (t3 + 4);
    *((unsigned int *)t3) = 1;
    *((unsigned int *)t10) = 1;

LAB7:    t11 = (t3 + 4);
    t12 = (t4 + 4);
    t13 = *((unsigned int *)t4);
    t14 = (~(t13));
    *((unsigned int *)t3) = t14;
    *((unsigned int *)t11) = 0;
    if (*((unsigned int *)t12) != 0)
        goto LAB9;

LAB8:    t19 = *((unsigned int *)t3);
    *((unsigned int *)t3) = (t19 & 1U);
    t20 = *((unsigned int *)t11);
    *((unsigned int *)t11) = (t20 & 1U);
    t21 = (t0 + 9056);
    t22 = (t21 + 56U);
    t23 = *((char **)t22);
    t24 = (t23 + 56U);
    t25 = *((char **)t24);
    memset(t25, 0, 8);
    t26 = 1U;
    t27 = t26;
    t28 = (t3 + 4);
    t29 = *((unsigned int *)t3);
    t26 = (t26 & t29);
    t30 = *((unsigned int *)t28);
    t27 = (t27 & t30);
    t31 = (t25 + 4);
    t32 = *((unsigned int *)t25);
    *((unsigned int *)t25) = (t32 | t26);
    t33 = *((unsigned int *)t31);
    *((unsigned int *)t31) = (t33 | t27);
    xsi_driver_vfirst_trans(t21, 0, 0);
    t34 = (t0 + 8832);
    *((int *)t34) = 1;

LAB1:    return;
//.........这里部分代码省略.........
开发者ID:csus-senior-design，项目名称:DDR2Test，代码行数:101，代码来源:m_00000000001121161005_3883157902.c

示例9: Cont_179_0


//.........这里部分代码省略.........
LAB9:    t18 = *((unsigned int *)t4);
    t19 = (~(t18));
    t20 = *((unsigned int *)t12);
    t21 = (t19 || t20);
    if (t21 > 0)
        goto LAB10;

LAB11:    if (*((unsigned int *)t12) > 0)
        goto LAB12;

LAB13:    if (*((unsigned int *)t4) > 0)
        goto LAB14;

LAB15:    memcpy(t3, t22, 8);

LAB16:    t40 = (t0 + 8992);
    t41 = (t40 + 56U);
    t42 = *((char **)t41);
    t43 = (t42 + 56U);
    t44 = *((char **)t43);
    memset(t44, 0, 8);
    t45 = 1U;
    t46 = t45;
    t47 = (t3 + 4);
    t48 = *((unsigned int *)t3);
    t45 = (t45 & t48);
    t49 = *((unsigned int *)t47);
    t46 = (t46 & t49);
    t50 = (t44 + 4);
    t51 = *((unsigned int *)t44);
    *((unsigned int *)t44) = (t51 | t45);
    t52 = *((unsigned int *)t50);
    *((unsigned int *)t50) = (t52 | t46);
    xsi_driver_vfirst_trans(t40, 0, 0);
    t53 = (t0 + 8816);
    *((int *)t53) = 1;

LAB1:    return;
LAB4:    *((unsigned int *)t4) = 1;
    goto LAB7;

LAB6:    t11 = (t4 + 4);
    *((unsigned int *)t4) = 1;
    *((unsigned int *)t11) = 1;
    goto LAB7;

LAB8:    t16 = (t0 + 3768U);
    t17 = *((char **)t16);
    goto LAB9;

LAB10:    t16 = (t0 + 3768U);
    t23 = *((char **)t16);
    memset(t22, 0, 8);
    t16 = (t23 + 4);
    t24 = *((unsigned int *)t16);
    t25 = (~(t24));
    t26 = *((unsigned int *)t23);
    t27 = (t26 & t25);
    t28 = (t27 & 1U);
    if (t28 != 0)
        goto LAB20;

LAB18:    if (*((unsigned int *)t16) == 0)
        goto LAB17;

LAB19:    t29 = (t22 + 4);
开发者ID:csus-senior-design，项目名称:DDR2Test，代码行数:67，代码来源:m_00000000001121161005_3883157902.c

示例10: Cont_33_0

static void Cont_33_0(char *t0)
{
    char t5[8];
    char *t1;
    char *t2;
    char *t3;
    char *t4;
    unsigned int t6;
    unsigned int t7;
    unsigned int t8;
    char *t9;
    char *t10;
    unsigned int t11;
    unsigned int t12;
    unsigned int t13;
    unsigned int t14;
    unsigned int t15;
    unsigned int t16;
    unsigned int t17;
    char *t18;
    char *t19;
    unsigned int t20;
    unsigned int t21;
    unsigned int t22;
    int t23;
    unsigned int t24;
    unsigned int t25;
    unsigned int t26;
    int t27;
    unsigned int t28;
    unsigned int t29;
    unsigned int t30;
    unsigned int t31;
    char *t32;
    char *t33;
    char *t34;
    char *t35;
    char *t36;
    unsigned int t37;
    unsigned int t38;
    char *t39;
    unsigned int t40;
    unsigned int t41;
    char *t42;
    unsigned int t43;
    unsigned int t44;
    char *t45;

LAB0:    t1 = (t0 + 1904U);
    t2 = *((char **)t1);
    if (t2 == 0)
        goto LAB2;

LAB3:    goto *t2;

LAB2:    xsi_set_current_line(33, ng0);
    t2 = (t0 + 1152U);
    t3 = *((char **)t2);
    t2 = (t0 + 1244U);
    t4 = *((char **)t2);
    t6 = *((unsigned int *)t3);
    t7 = *((unsigned int *)t4);
    t8 = (t6 | t7);
    *((unsigned int *)t5) = t8;
    t2 = (t3 + 4);
    t9 = (t4 + 4);
    t10 = (t5 + 4);
    t11 = *((unsigned int *)t2);
    t12 = *((unsigned int *)t9);
    t13 = (t11 | t12);
    *((unsigned int *)t10) = t13;
    t14 = *((unsigned int *)t10);
    t15 = (t14 != 0);
    if (t15 == 1)
        goto LAB4;

LAB5:
LAB6:    t32 = (t0 + 2144);
    t33 = (t32 + 32U);
    t34 = *((char **)t33);
    t35 = (t34 + 40U);
    t36 = *((char **)t35);
    memset(t36, 0, 8);
    t37 = 1U;
    t38 = t37;
    t39 = (t5 + 4);
    t40 = *((unsigned int *)t5);
    t37 = (t37 & t40);
    t41 = *((unsigned int *)t39);
    t38 = (t38 & t41);
    t42 = (t36 + 4);
    t43 = *((unsigned int *)t36);
    *((unsigned int *)t36) = (t43 | t37);
    t44 = *((unsigned int *)t42);
    *((unsigned int *)t42) = (t44 | t38);
    xsi_driver_vfirst_trans(t32, 0, 0);
    t45 = (t0 + 2100);
    *((int *)t45) = 1;

LAB1:    return;
//.........这里部分代码省略.........
开发者ID:andyhsu10，项目名称:LogicDesignLab，代码行数:101，代码来源:m_00000000002280282035_2902715030.c

示例11: Cont_28_0

static void Cont_28_0(char *t0)
{
    char t5[8];
    char *t1;
    char *t2;
    char *t3;
    char *t4;
    unsigned int t6;
    unsigned int t7;
    unsigned int t8;
    char *t9;
    char *t10;
    unsigned int t11;
    unsigned int t12;
    unsigned int t13;
    unsigned int t14;
    unsigned int t15;
    unsigned int t16;
    unsigned int t17;
    char *t18;
    char *t19;
    unsigned int t20;
    unsigned int t21;
    unsigned int t22;
    unsigned int t23;
    unsigned int t24;
    unsigned int t25;
    unsigned int t26;
    unsigned int t27;
    int t28;
    int t29;
    unsigned int t30;
    unsigned int t31;
    unsigned int t32;
    unsigned int t33;
    unsigned int t34;
    unsigned int t35;
    char *t36;
    char *t37;
    char *t38;
    char *t39;
    char *t40;
    unsigned int t41;
    unsigned int t42;
    char *t43;
    unsigned int t44;
    unsigned int t45;
    char *t46;
    unsigned int t47;
    unsigned int t48;
    char *t49;

LAB0:    t1 = (t0 + 1444U);
    t2 = *((char **)t1);
    if (t2 == 0)
        goto LAB2;

LAB3:    goto *t2;

LAB2:    xsi_set_current_line(28, ng0);
    t2 = (t0 + 600U);
    t3 = *((char **)t2);
    t2 = (t0 + 692U);
    t4 = *((char **)t2);
    t6 = *((unsigned int *)t3);
    t7 = *((unsigned int *)t4);
    t8 = (t6 & t7);
    *((unsigned int *)t5) = t8;
    t2 = (t3 + 4);
    t9 = (t4 + 4);
    t10 = (t5 + 4);
    t11 = *((unsigned int *)t2);
    t12 = *((unsigned int *)t9);
    t13 = (t11 | t12);
    *((unsigned int *)t10) = t13;
    t14 = *((unsigned int *)t10);
    t15 = (t14 != 0);
    if (t15 == 1)
        goto LAB4;

LAB5:
LAB6:    t36 = (t0 + 1684);
    t37 = (t36 + 32U);
    t38 = *((char **)t37);
    t39 = (t38 + 40U);
    t40 = *((char **)t39);
    memset(t40, 0, 8);
    t41 = 1U;
    t42 = t41;
    t43 = (t5 + 4);
    t44 = *((unsigned int *)t5);
    t41 = (t41 & t44);
    t45 = *((unsigned int *)t43);
    t42 = (t42 & t45);
    t46 = (t40 + 4);
    t47 = *((unsigned int *)t40);
    *((unsigned int *)t40) = (t47 | t41);
    t48 = *((unsigned int *)t46);
    *((unsigned int *)t46) = (t48 | t42);
    xsi_driver_vfirst_trans(t36, 0, 0);
//.........这里部分代码省略.........
开发者ID:manuelgop，项目名称:VHDL_Projects，代码行数:101，代码来源:m_00000000003912470078_0601351335.c

示例12: Cont_42_0

static void Cont_42_0(char *t0)
{
    char t8[8];
    char *t1;
    char *t2;
    char *t3;
    char *t4;
    char *t5;
    char *t6;
    char *t7;
    unsigned int t9;
    unsigned int t10;
    unsigned int t11;
    char *t12;
    char *t13;
    char *t14;
    unsigned int t15;
    unsigned int t16;
    unsigned int t17;
    unsigned int t18;
    unsigned int t19;
    unsigned int t20;
    unsigned int t21;
    char *t22;
    char *t23;
    char *t24;
    char *t25;
    char *t26;
    unsigned int t27;
    unsigned int t28;
    char *t29;
    unsigned int t30;
    unsigned int t31;
    char *t32;
    unsigned int t33;
    unsigned int t34;
    char *t35;

LAB0:    t1 = (t0 + 3008U);
    t2 = *((char **)t1);
    if (t2 == 0)
        goto LAB2;

LAB3:    goto *t2;

LAB2:    xsi_set_current_line(42, ng0);
    t2 = (t0 + 1928);
    t3 = (t2 + 56U);
    t4 = *((char **)t3);
    t5 = (t0 + 1768);
    t6 = (t5 + 56U);
    t7 = *((char **)t6);
    t9 = *((unsigned int *)t4);
    t10 = *((unsigned int *)t7);
    t11 = (t9 ^ t10);
    *((unsigned int *)t8) = t11;
    t12 = (t4 + 4);
    t13 = (t7 + 4);
    t14 = (t8 + 4);
    t15 = *((unsigned int *)t12);
    t16 = *((unsigned int *)t13);
    t17 = (t15 | t16);
    *((unsigned int *)t14) = t17;
    t18 = *((unsigned int *)t14);
    t19 = (t18 != 0);
    if (t19 == 1)
        goto LAB4;

LAB5:
LAB6:    t22 = (t0 + 3672);
    t23 = (t22 + 56U);
    t24 = *((char **)t23);
    t25 = (t24 + 56U);
    t26 = *((char **)t25);
    memset(t26, 0, 8);
    t27 = 1U;
    t28 = t27;
    t29 = (t8 + 4);
    t30 = *((unsigned int *)t8);
    t27 = (t27 & t30);
    t31 = *((unsigned int *)t29);
    t28 = (t28 & t31);
    t32 = (t26 + 4);
    t33 = *((unsigned int *)t26);
    *((unsigned int *)t26) = (t33 | t27);
    t34 = *((unsigned int *)t32);
    *((unsigned int *)t32) = (t34 | t28);
    xsi_driver_vfirst_trans(t22, 0, 0);
    t35 = (t0 + 3576);
    *((int *)t35) = 1;

LAB1:    return;
LAB4:    t20 = *((unsigned int *)t8);
    t21 = *((unsigned int *)t14);
    *((unsigned int *)t8) = (t20 | t21);
    goto LAB6;

}
开发者ID:themaxaboy，项目名称:Flappy-Bird-Verilog，代码行数:98，代码来源:m_00000000000998310531_1575611186.c

示例13: Cont_48_2


//.........这里部分代码省略.........
    int t27;
    unsigned int t28;
    unsigned int t29;
    unsigned int t30;
    int t31;
    unsigned int t32;
    unsigned int t33;
    unsigned int t34;
    unsigned int t35;
    char *t36;
    char *t37;
    char *t38;
    char *t39;
    char *t40;
    unsigned int t41;
    unsigned int t42;
    char *t43;
    unsigned int t44;
    unsigned int t45;
    char *t46;
    unsigned int t47;
    unsigned int t48;
    char *t49;

LAB0:    t1 = (t0 + 4464U);
    t2 = *((char **)t1);
    if (t2 == 0)
        goto LAB2;

LAB3:    goto *t2;

LAB2:    xsi_set_current_line(48, ng0);
    t2 = (t0 + 2568);
    t3 = (t2 + 56U);
    t4 = *((char **)t3);
    t5 = (t0 + 2728);
    t6 = (t5 + 56U);
    t7 = *((char **)t6);
    t9 = *((unsigned int *)t4);
    t10 = *((unsigned int *)t7);
    t11 = (t9 | t10);
    *((unsigned int *)t8) = t11;
    t12 = (t4 + 4);
    t13 = (t7 + 4);
    t14 = (t8 + 4);
    t15 = *((unsigned int *)t12);
    t16 = *((unsigned int *)t13);
    t17 = (t15 | t16);
    *((unsigned int *)t14) = t17;
    t18 = *((unsigned int *)t14);
    t19 = (t18 != 0);
    if (t19 == 1)
        goto LAB4;

LAB5:
LAB6:    t36 = (t0 + 4896);
    t37 = (t36 + 56U);
    t38 = *((char **)t37);
    t39 = (t38 + 56U);
    t40 = *((char **)t39);
    memset(t40, 0, 8);
    t41 = 1U;
    t42 = t41;
    t43 = (t8 + 4);
    t44 = *((unsigned int *)t8);
    t41 = (t41 & t44);
    t45 = *((unsigned int *)t43);
    t42 = (t42 & t45);
    t46 = (t40 + 4);
    t47 = *((unsigned int *)t40);
    *((unsigned int *)t40) = (t47 | t41);
    t48 = *((unsigned int *)t46);
    *((unsigned int *)t46) = (t48 | t42);
    xsi_driver_vfirst_trans(t36, 0, 0);
    t49 = (t0 + 4816);
    *((int *)t49) = 1;

LAB1:    return;
LAB4:    t20 = *((unsigned int *)t8);
    t21 = *((unsigned int *)t14);
    *((unsigned int *)t8) = (t20 | t21);
    t22 = (t4 + 4);
    t23 = (t7 + 4);
    t24 = *((unsigned int *)t22);
    t25 = (~(t24));
    t26 = *((unsigned int *)t4);
    t27 = (t26 & t25);
    t28 = *((unsigned int *)t23);
    t29 = (~(t28));
    t30 = *((unsigned int *)t7);
    t31 = (t30 & t29);
    t32 = (~(t27));
    t33 = (~(t31));
    t34 = *((unsigned int *)t14);
    *((unsigned int *)t14) = (t34 & t32);
    t35 = *((unsigned int *)t14);
    *((unsigned int *)t14) = (t35 & t33);
    goto LAB6;

}
开发者ID:ayoosh，项目名称:forbidden_architecture，代码行数:101，代码来源:m_00000000000379686200_2461264495.c

示例14: Cont_139_3


//.........这里部分代码省略.........
    t148 = (t146 & t147);
    *((unsigned int *)t145) = t148;
    t149 = (t98 + 4);
    t150 = (t126 + 4);
    t151 = (t145 + 4);
    t152 = *((unsigned int *)t149);
    t153 = *((unsigned int *)t150);
    t154 = (t152 | t153);
    *((unsigned int *)t151) = t154;
    t155 = *((unsigned int *)t151);
    t156 = (t155 != 0);
    if (t156 == 1)
        goto LAB39;

LAB40:
LAB41:    t177 = (t0 + 8464);
    t178 = (t177 + 56U);
    t179 = *((char **)t178);
    t180 = (t179 + 56U);
    t181 = *((char **)t180);
    memset(t181, 0, 8);
    t182 = 1U;
    t183 = t182;
    t184 = (t145 + 4);
    t185 = *((unsigned int *)t145);
    t182 = (t182 & t185);
    t186 = *((unsigned int *)t184);
    t183 = (t183 & t186);
    t187 = (t181 + 4);
    t188 = *((unsigned int *)t181);
    *((unsigned int *)t181) = (t188 | t182);
    t189 = *((unsigned int *)t187);
    *((unsigned int *)t187) = (t189 | t183);
    xsi_driver_vfirst_trans(t177, 0, 0);
    t190 = (t0 + 8368);
    *((int *)t190) = 1;

LAB1:    return;
LAB5:    t11 = (t8 + 4);
    *((unsigned int *)t8) = 1;
    *((unsigned int *)t11) = 1;
    goto LAB7;

LAB10:    t21 = (t18 + 4);
    *((unsigned int *)t18) = 1;
    *((unsigned int *)t21) = 1;
    goto LAB12;

LAB14:    t34 = *((unsigned int *)t22);
    t35 = *((unsigned int *)t28);
    *((unsigned int *)t22) = (t34 | t35);
    t36 = (t8 + 4);
    t37 = (t18 + 4);
    t38 = *((unsigned int *)t36);
    t39 = (~(t38));
    t40 = *((unsigned int *)t8);
    t41 = (t40 & t39);
    t42 = *((unsigned int *)t37);
    t43 = (~(t42));
    t44 = *((unsigned int *)t18);
    t45 = (t44 & t43);
    t46 = (~(t41));
    t47 = (~(t45));
    t48 = *((unsigned int *)t28);
    *((unsigned int *)t28) = (t48 & t46);
    t49 = *((unsigned int *)t28);
开发者ID:mahmoudovic，项目名称:MATRIXAI，代码行数:67，代码来源:m_00000000001855824547_3314342519.c

示例15: Cont_44_7


//.........这里部分代码省略.........

LAB3:    goto *t2;

LAB2:    xsi_set_current_line(44, ng0);
    t2 = (t0 + 3048);
    t5 = (t2 + 56U);
    t6 = *((char **)t5);
    t7 = ((char*)((ng1)));
    memset(t8, 0, 8);
    if (*((unsigned int *)t6) != *((unsigned int *)t7))
        goto LAB6;

LAB4:    t9 = (t6 + 4);
    t10 = (t7 + 4);
    if (*((unsigned int *)t9) != *((unsigned int *)t10))
        goto LAB6;

LAB5:    *((unsigned int *)t8) = 1;

LAB6:    memset(t4, 0, 8);
    t11 = (t8 + 4);
    t12 = *((unsigned int *)t11);
    t13 = (~(t12));
    t14 = *((unsigned int *)t8);
    t15 = (t14 & t13);
    t16 = (t15 & 1U);
    if (t16 != 0)
        goto LAB7;

LAB8:    if (*((unsigned int *)t11) != 0)
        goto LAB9;

LAB10:    t18 = (t4 + 4);
    t19 = *((unsigned int *)t4);
    t20 = *((unsigned int *)t18);
    t21 = (t19 || t20);
    if (t21 > 0)
        goto LAB11;

LAB12:    t25 = *((unsigned int *)t4);
    t26 = (~(t25));
    t27 = *((unsigned int *)t18);
    t28 = (t26 || t27);
    if (t28 > 0)
        goto LAB13;

LAB14:    if (*((unsigned int *)t18) > 0)
        goto LAB15;

LAB16:    if (*((unsigned int *)t4) > 0)
        goto LAB17;

LAB18:    memcpy(t3, t29, 8);

LAB19:    t30 = (t0 + 7976);
    t31 = (t30 + 56U);
    t32 = *((char **)t31);
    t33 = (t32 + 56U);
    t34 = *((char **)t33);
    memset(t34, 0, 8);
    t35 = 1U;
    t36 = t35;
    t37 = (t3 + 4);
    t38 = *((unsigned int *)t3);
    t35 = (t35 & t38);
    t39 = *((unsigned int *)t37);
    t36 = (t36 & t39);
    t40 = (t34 + 4);
    t41 = *((unsigned int *)t34);
    *((unsigned int *)t34) = (t41 | t35);
    t42 = *((unsigned int *)t40);
    *((unsigned int *)t40) = (t42 | t36);
    xsi_driver_vfirst_trans(t30, 0, 0);
    t43 = (t0 + 7320);
    *((int *)t43) = 1;

LAB1:    return;
LAB7:    *((unsigned int *)t4) = 1;
    goto LAB10;

LAB9:    t17 = (t4 + 4);
    *((unsigned int *)t4) = 1;
    *((unsigned int *)t17) = 1;
    goto LAB10;

LAB11:    t22 = (t0 + 3848);
    t23 = (t22 + 56U);
    t24 = *((char **)t23);
    goto LAB12;

LAB13:    t29 = ((char*)((ng3)));
    goto LAB14;

LAB15:    xsi_vlog_unsigned_bit_combine(t3, 1, t24, 1, t29, 1);
    goto LAB19;

LAB17:    memcpy(t3, t24, 8);
    goto LAB19;

}
开发者ID:eliotw，项目名称:IBM_PC，代码行数:101，代码来源:m_01345394777490018668_2359297927.c


注：本文中的xsi_driver_vfirst_trans函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。