当前位置: 首页>>代码示例>>C++>>正文

C++ xmlSecTransformGetName函数代码示例

本文整理汇总了C++中xmlSecTransformGetName函数的典型用法代码示例。如果您正苦于以下问题：C++ xmlSecTransformGetName函数的具体用法？C++ xmlSecTransformGetName怎么用？C++ xmlSecTransformGetName使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了xmlSecTransformGetName函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: xmlSecOpenSSLRsaOaepSetKey

static int
xmlSecOpenSSLRsaOaepSetKey(xmlSecTransformPtr transform, xmlSecKeyPtr key) {
    xmlSecOpenSSLRsaOaepCtxPtr ctx;
    EVP_PKEY* pKey;
    RSA *rsa;

    xmlSecAssert2(xmlSecTransformCheckId(transform, xmlSecOpenSSLTransformRsaOaepId), -1);
    xmlSecAssert2((transform->operation == xmlSecTransformOperationEncrypt) || (transform->operation == xmlSecTransformOperationDecrypt), -1);
    xmlSecAssert2(xmlSecTransformCheckSize(transform, xmlSecOpenSSLRsaOaepSize), -1);
    xmlSecAssert2(key != NULL, -1);
    xmlSecAssert2(xmlSecKeyDataCheckId(xmlSecKeyGetValue(key), xmlSecOpenSSLKeyDataRsaId), -1);

    ctx = xmlSecOpenSSLRsaOaepGetCtx(transform);
    xmlSecAssert2(ctx != NULL, -1);
    xmlSecAssert2(ctx->pKey == NULL, -1);

    pKey = xmlSecOpenSSLKeyDataRsaGetEvp(xmlSecKeyGetValue(key));
    if(pKey == NULL) {
        xmlSecInternalError("xmlSecOpenSSLKeyDataRsaGetEvp",
                            xmlSecTransformGetName(transform));
        return(-1);
    }
    xmlSecAssert2(EVP_PKEY_base_id(pKey) == EVP_PKEY_RSA, -1);
    rsa = EVP_PKEY_get0_RSA(pKey);
    xmlSecAssert2(rsa != NULL, -1);

    ctx->pKey = xmlSecOpenSSLEvpKeyDup(pKey);
    if(ctx->pKey == NULL) {
        xmlSecInternalError("xmlSecOpenSSLEvpKeyDup",
                            xmlSecTransformGetName(transform));
        return(-1);
    }

    return(0);
}
开发者ID:esproul，项目名称:xmlsec，代码行数:35，代码来源:kt_rsa.c

示例2: xmlSecOpenSSLHmacVerify

static int
xmlSecOpenSSLHmacVerify(xmlSecTransformPtr transform, 
			const xmlSecByte* data, xmlSecSize dataSize,
			xmlSecTransformCtxPtr transformCtx) {
    static xmlSecByte last_byte_masks[] = 	
		{ 0xFF, 0x80, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC, 0xFE };

    xmlSecOpenSSLHmacCtxPtr ctx;
    xmlSecByte mask;
        
    xmlSecAssert2(xmlSecTransformIsValid(transform), -1);
    xmlSecAssert2(xmlSecTransformCheckSize(transform, xmlSecOpenSSLHmacSize), -1);
    xmlSecAssert2(transform->operation == xmlSecTransformOperationVerify, -1);
    xmlSecAssert2(transform->status == xmlSecTransformStatusFinished, -1);
    xmlSecAssert2(data != NULL, -1);
    xmlSecAssert2(transformCtx != NULL, -1);

    ctx = xmlSecOpenSSLHmacGetCtx(transform);
    xmlSecAssert2(ctx != NULL, -1);
    xmlSecAssert2(ctx->dgstSize > 0, -1);
    
    /* compare the digest size in bytes */
    if(dataSize != ((ctx->dgstSize + 7) / 8)){
	xmlSecErr_a_ignorar5(XMLSEC_ERRORS_HERE, 
		    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
		    NULL,
		    XMLSEC_ERRORS_R_INVALID_SIZE,
		    "data=%d;dgst=%d",
		    dataSize, ((ctx->dgstSize + 7) / 8));
	transform->status = xmlSecTransformStatusFail;
	return(0);
    }

    /* we check the last byte separatelly */
    xmlSecAssert2(dataSize > 0, -1);
    mask = last_byte_masks[ctx->dgstSize % 8];
    if((ctx->dgst[dataSize - 1] & mask) != (data[dataSize - 1]  & mask)) {
	xmlSecErr_a_ignorar5(XMLSEC_ERRORS_HERE, 
		    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
		    NULL,
		    XMLSEC_ERRORS_R_DATA_NOT_MATCH,
		    "data and digest do not match (last byte)");
	transform->status = xmlSecTransformStatusFail;
	return(0);
    }

    /* now check the rest of the digest */
    if((dataSize > 1) && (memcmp(ctx->dgst, data, dataSize - 1) != 0)) {
	xmlSecErr_a_ignorar5(XMLSEC_ERRORS_HERE, 
		    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
		    NULL,
		    XMLSEC_ERRORS_R_DATA_NOT_MATCH,
		    "data and digest do not match");
	transform->status = xmlSecTransformStatusFail;
	return(0);
    }
    
    transform->status = xmlSecTransformStatusOk;
    return(0);
}
开发者ID:Arcenciel，项目名称:DDReader，代码行数:60，代码来源:hmac.c

示例3: xmlSecTransformXPointerNodeRead

static int
xmlSecTransformXPointerNodeRead(xmlSecTransformPtr transform, xmlNodePtr node, xmlSecTransformCtxPtr transformCtx) {
    xmlSecPtrListPtr dataList;
    xmlSecXPathDataPtr data;
    xmlNodePtr cur;
    int ret;

    xmlSecAssert2(xmlSecTransformCheckId(transform, xmlSecTransformXPointerId), -1);
    xmlSecAssert2(node != NULL, -1);
    xmlSecAssert2(transformCtx != NULL, -1);

    dataList = xmlSecXPathTransformGetDataList(transform);
    xmlSecAssert2(xmlSecPtrListCheckId(dataList, xmlSecXPathDataListId), -1);
    xmlSecAssert2(xmlSecPtrListGetSize(dataList) == 0, -1);

    /* there is only one required node */
    cur = xmlSecGetNextElementNode(node->children);
    if((cur == NULL) || (!xmlSecCheckNodeName(cur, xmlSecNodeXPointer, xmlSecXPointerNs))) {
        xmlSecInvalidNodeError(cur, xmlSecNodeXPointer,
                               xmlSecTransformGetName(transform));
        return(-1);
    }

    /* read information from the node */
    data = xmlSecXPathDataCreate(xmlSecXPathDataTypeXPointer);
    if(data == NULL) {
        xmlSecInternalError("xmlSecXPathDataCreate",
                            xmlSecTransformGetName(transform));
        return(-1);
    }

    ret = xmlSecXPathDataNodeRead(data, cur);
    if(ret < 0) {
        xmlSecInternalError("xmlSecXPathDataNodeRead",
                            xmlSecTransformGetName(transform));
        xmlSecXPathDataDestroy(data);
        return(-1);
    }

    /* append it to the list */
    ret = xmlSecPtrListAdd(dataList, data);
    if(ret < 0) {
        xmlSecInternalError("xmlSecPtrListAdd",
                            xmlSecTransformGetName(transform));
        xmlSecXPathDataDestroy(data);
        return(-1);
    }

    /* set correct node set type and operation */
    data->nodeSetOp     = xmlSecNodeSetIntersection;
    data->nodeSetType   = xmlSecNodeSetTree;

    /* check that we have nothing else */
    cur = xmlSecGetNextElementNode(cur->next);
    if(cur != NULL) {
        xmlSecUnexpectedNodeError(cur, xmlSecTransformGetName(transform));
        return(-1);
    }
    return(0);
}
开发者ID:esproul，项目名称:xmlsec，代码行数:60，代码来源:xpath.c

示例4: xmlSecOpenSSLRsaOaepNodeRead

static int
xmlSecOpenSSLRsaOaepNodeRead(xmlSecTransformPtr transform, xmlNodePtr node, xmlSecTransformCtxPtr transformCtx) {
    xmlSecOpenSSLRsaOaepCtxPtr ctx;
    xmlNodePtr cur;
    int ret;

    xmlSecAssert2(xmlSecTransformCheckId(transform, xmlSecOpenSSLTransformRsaOaepId), -1);
    xmlSecAssert2(xmlSecTransformCheckSize(transform, xmlSecOpenSSLRsaOaepSize), -1);
    xmlSecAssert2(node != NULL, -1);
    xmlSecAssert2(transformCtx != NULL, -1);

    ctx = xmlSecOpenSSLRsaOaepGetCtx(transform);
    xmlSecAssert2(ctx != NULL, -1);
    xmlSecAssert2(xmlSecBufferGetSize(&(ctx->oaepParams)) == 0, -1);

    cur = xmlSecGetNextElementNode(node->children);
    while(cur != NULL) {
        if(xmlSecCheckNodeName(cur,  xmlSecNodeRsaOAEPparams, xmlSecEncNs)) {
            ret = xmlSecBufferBase64NodeContentRead(&(ctx->oaepParams), cur);
            if(ret < 0) {
                xmlSecInternalError("xmlSecBufferBase64NodeContentRead",
                                    xmlSecTransformGetName(transform));
                return(-1);
            }
        } else if(xmlSecCheckNodeName(cur,  xmlSecNodeDigestMethod, xmlSecDSigNs)) {
            xmlChar* algorithm;

            /* Algorithm attribute is required */
            algorithm = xmlGetProp(cur, xmlSecAttrAlgorithm);
            if(algorithm == NULL) {
                xmlSecInvalidNodeAttributeError(cur, xmlSecAttrAlgorithm,
                                                xmlSecTransformGetName(transform),
                                                "empty");
                return(-1);
            }

            /* for now we support only sha1 */
            if(xmlStrcmp(algorithm, xmlSecHrefSha1) != 0) {
                xmlSecInvalidTransfromError2(transform,
                                "digest algorithm=\"%s\" is not supported for rsa/oaep",
                                xmlSecErrorsSafeString(algorithm));
                xmlFree(algorithm);
                return(-1);
            }
            xmlFree(algorithm);
        } else {
            /* not found */
            xmlSecUnexpectedNodeError(cur, xmlSecTransformGetName(transform));
            return(-1);
        }

        /* next node */
        cur = xmlSecGetNextElementNode(cur->next);
    }

    return(0);
}
开发者ID:esproul，项目名称:xmlsec，代码行数:57，代码来源:kt_rsa.c

示例5: xmlSecTransformXPointerSetExpr

/**
 * xmlSecTransformXPointerSetExpr:
 * @transform:          the pointer to XPointer transform.
 * @expr:               the XPointer expression.
 * @nodeSetType:        the type of evaluated XPointer expression.
 * @hereNode:           the pointer to "here" node.
 *
 * Sets the XPointer expression for an XPointer @transform.
 *
 * Returns: 0 on success or a negative value if an error occurs.
 */
int
xmlSecTransformXPointerSetExpr(xmlSecTransformPtr transform, const xmlChar* expr,
                            xmlSecNodeSetType  nodeSetType, xmlNodePtr hereNode) {
    xmlSecPtrListPtr dataList;
    xmlSecXPathDataPtr data;
    int ret;

    xmlSecAssert2(xmlSecTransformCheckId(transform, xmlSecTransformXPointerId), -1);
    xmlSecAssert2(transform->hereNode == NULL, -1);
    xmlSecAssert2(expr != NULL, -1);
    xmlSecAssert2(hereNode != NULL, -1);

    transform->hereNode = hereNode;

    dataList = xmlSecXPathTransformGetDataList(transform);
    xmlSecAssert2(xmlSecPtrListCheckId(dataList, xmlSecXPathDataListId), -1);
    xmlSecAssert2(xmlSecPtrListGetSize(dataList) == 0, -1);

    data = xmlSecXPathDataCreate(xmlSecXPathDataTypeXPointer);
    if(data == NULL) {
        xmlSecInternalError("xmlSecXPathDataCreate",
                            xmlSecTransformGetName(transform));
        return(-1);
    }

    ret = xmlSecXPathDataRegisterNamespaces(data, hereNode);
    if(ret < 0) {
        xmlSecInternalError("xmlSecXPathDataRegisterNamespaces",
                            xmlSecTransformGetName(transform));
        xmlSecXPathDataDestroy(data);
        return(-1);
    }

    ret = xmlSecXPathDataSetExpr(data, expr);
    if(ret < 0) {
        xmlSecInternalError("xmlSecXPathDataSetExpr",
                            xmlSecTransformGetName(transform));
        xmlSecXPathDataDestroy(data);
        return(-1);
    }

    /* append it to the list */
    ret = xmlSecPtrListAdd(dataList, data);
    if(ret < 0) {
        xmlSecInternalError("xmlSecPtrListAdd",
                            xmlSecTransformGetName(transform));
        xmlSecXPathDataDestroy(data);
        return(-1);
    }

    /* set correct node set type and operation */
    data->nodeSetOp     = xmlSecNodeSetIntersection;
    data->nodeSetType   = nodeSetType;

    return(0);
}
开发者ID:esproul，项目名称:xmlsec，代码行数:67，代码来源:xpath.c

示例6: xmlSecTransformVisa3DHackExecute

static int
xmlSecTransformVisa3DHackExecute(xmlSecTransformPtr transform, int last,
                            xmlSecTransformCtxPtr transformCtx) {
    xmlChar** idPtr;
    xmlDocPtr doc;
    xmlAttrPtr attr;
    xmlNodeSetPtr nodeSet;

    xmlSecAssert2(xmlSecTransformVisa3DHackCheckId(transform), -1);
    xmlSecAssert2(transform->outNodes == NULL, -1);
    xmlSecAssert2(last != 0, -1);
    xmlSecAssert2(transformCtx != NULL, -1);

    idPtr = xmlSecVisa3DHackTransformGetIDPtr(transform);
    xmlSecAssert2(idPtr != NULL, -1);
    xmlSecAssert2((*idPtr) != NULL, -1);

    doc = (transform->inNodes != NULL) ? transform->inNodes->doc : transform->hereNode->doc;
    xmlSecAssert2(doc != NULL, -1);

    attr = xmlGetID(doc, (*idPtr));
    if((attr == NULL) || (attr->parent == NULL)) {
        xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    "xmlGetID",
                    XMLSEC_ERRORS_R_XML_FAILED,
                    "id=\"%s\"",
                    xmlSecErrorsSafeString((*idPtr)));
        return(-1);
    }

    nodeSet = xmlXPathNodeSetCreate(attr->parent);
    if(nodeSet == NULL) {
        xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    "xmlXPathNodeSetCreate",
                    XMLSEC_ERRORS_R_XML_FAILED,
                    "id=\"%s\"",
                    xmlSecErrorsSafeString((*idPtr)));
        return(-1);
    }

    transform->outNodes = xmlSecNodeSetCreate(doc, nodeSet, xmlSecNodeSetTreeWithoutComments);
    if(transform->outNodes == NULL) {
        xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    "xmlSecNodeSetCreate",
                    XMLSEC_ERRORS_R_XMLSEC_FAILED,
                    XMLSEC_ERRORS_NO_MESSAGE);
        xmlXPathFreeNodeSet(nodeSet);
        return(-1);
    }
    return(0);
}
开发者ID:patpenetrante，项目名称:xmlsec，代码行数:54，代码来源:xpath.c

示例7: xmlSecMSCngSignatureVerify

static int xmlSecMSCngSignatureVerify(xmlSecTransformPtr transform,
                                      const xmlSecByte* data,
                                      xmlSecSize dataSize,
                                      xmlSecTransformCtxPtr transformCtx) {
    xmlSecMSCngSignatureCtxPtr ctx;
    BCRYPT_KEY_HANDLE pubkey;
    NTSTATUS status;
    int ret;

    xmlSecAssert2(xmlSecMSCngSignatureCheckId(transform), -1);
    xmlSecAssert2(transform->operation == xmlSecTransformOperationVerify, -1);
    xmlSecAssert2(xmlSecTransformCheckSize(transform, xmlSecMSCngSignatureSize), -1);
    xmlSecAssert2(transform->status == xmlSecTransformStatusFinished, -1);
    xmlSecAssert2(data != NULL, -1);
    xmlSecAssert2(dataSize > 0, -1);
    xmlSecAssert2(transformCtx != NULL, -1);

    ctx = xmlSecMSCngSignatureGetCtx(transform);
    xmlSecAssert2(ctx != NULL, -1);

    pubkey = xmlSecMSCngKeyDataGetKey(ctx->data, xmlSecKeyDataTypePublic);
    if(pubkey == 0) {
        xmlSecInternalError("xmlSecMSCngKeyDataGetKey",
            xmlSecTransformGetName(transform));
        return(-1);
    }

    status = BCryptVerifySignature(
        pubkey,
        NULL,
        ctx->pbHash,
        ctx->cbHash,
        (PBYTE)data,
        dataSize,
        0);
    if(status != STATUS_SUCCESS) {
        if(status == STATUS_INVALID_SIGNATURE) {
            xmlSecOtherError(XMLSEC_ERRORS_R_DATA_NOT_MATCH,
                xmlSecTransformGetName(transform),
                "BCryptVerifySignature: the signature was not verified");
            transform->status = xmlSecTransformStatusFail;
            return(-1);
        } else {
            xmlSecMSCngNtError("BCryptVerifySignature",
                xmlSecTransformGetName(transform), status);
            return(-1);
        }
    }

    transform->status = xmlSecTransformStatusOk;
    return(0);
}
开发者ID:esproul，项目名称:xmlsec，代码行数:52，代码来源:signatures.c

示例8: xmlSecTransformRelationshipProcessNode

/**
 * This is step 2, point 4: if the input sourceId list doesn't contain the Id attribute of the current node,
 * then exclude it from the output, instead of processing it.
 */
static int
xmlSecTransformRelationshipProcessNode(xmlSecTransformPtr transform, xmlOutputBufferPtr buf, xmlNodePtr cur) {
    int found = -1;
    xmlSecRelationshipCtxPtr ctx;
    xmlSecSize ii;
    int ret;

    xmlSecAssert2(transform != NULL, -1);
    xmlSecAssert2(buf != NULL, -1);
    xmlSecAssert2(cur != NULL, -1);

    if(xmlSecCheckNodeName(cur, xmlSecNodeRelationship, xmlSecRelationshipsNs)) {
        xmlChar* id = xmlGetProp(cur, xmlSecRelationshipAttrId);
        if(id == NULL) {
            xmlSecError(XMLSEC_ERRORS_HERE,
                        xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                        "xmlGetProp(xmlSecRelationshipAttrId)",
                        XMLSEC_ERRORS_R_XML_FAILED,
                        "name=Id");
            return(-1);
        }

        ctx = xmlSecRelationshipGetCtx(transform);
        for(ii = 0; ii < xmlSecPtrListGetSize(ctx->sourceIdList); ++ii) {
            if(xmlStrcmp(xmlSecPtrListGetItem(ctx->sourceIdList, ii), id) == 0) {
                found = 1;
                break;
            }
        }

        xmlFree(id);

        if(found < 0) {
            return(0);
        }
    }

    ret = xmlSecTransformRelationshipProcessElementNode(transform, buf, cur);
    if(ret < 0) {
        xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    "xmlSecTransformRelationshipProcessElementNode",
                    XMLSEC_ERRORS_R_XMLSEC_FAILED,
                    XMLSEC_ERRORS_NO_MESSAGE);
        return(-1);
    }

    return(0);
}
开发者ID:ONLYOFFICE，项目名称:core，代码行数:53，代码来源:relationship.c

示例9: xmlSecGCryptHmacNodeRead

/**
 * xmlSecGCryptHmacNodeRead:
 *
 * HMAC (http://www.w3.org/TR/xmldsig-core/#sec-HMAC):
 *
 * The HMAC algorithm (RFC2104 [HMAC]) takes the truncation length in bits
 * as a parameter; if the parameter is not specified then all the bits of the
 * hash are output. An example of an HMAC SignatureMethod element:
 * <SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#hmac-sha1">
 *   <HMACOutputLength>128</HMACOutputLength>
 * </SignatureMethod>
 *
 * Schema Definition:
 *
 * <simpleType name="HMACOutputLengthType">
 *   <restriction base="integer"/>
 * </simpleType>
 *
 * DTD:
 *
 * <!ELEMENT HMACOutputLength (#PCDATA)>
 */
static int
xmlSecGCryptHmacNodeRead(xmlSecTransformPtr transform, xmlNodePtr node, xmlSecTransformCtxPtr transformCtx) {
    xmlSecGCryptHmacCtxPtr ctx;
    xmlNodePtr cur;

    xmlSecAssert2(xmlSecGCryptHmacCheckId(transform), -1);
    xmlSecAssert2(xmlSecTransformCheckSize(transform, xmlSecGCryptHmacSize), -1);
    xmlSecAssert2(node != NULL, -1);
    xmlSecAssert2(transformCtx != NULL, -1);

    ctx = xmlSecGCryptHmacGetCtx(transform);
    xmlSecAssert2(ctx != NULL, -1);

    cur = xmlSecGetNextElementNode(node->children);
    if((cur != NULL) && xmlSecCheckNodeName(cur, xmlSecNodeHMACOutputLength, xmlSecDSigNs)) {
        xmlChar *content;

        content = xmlNodeGetContent(cur);
        if(content != NULL) {
            ctx->dgstSize = atoi((char*)content);
            xmlFree(content);
        }

        /* Ensure that HMAC length is greater than min specified.
           Otherwise, an attacker can set this length to 0 or very
           small value
        */
        if((int)ctx->dgstSize < xmlSecGCryptHmacGetMinOutputLength()) {
           xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    xmlSecErrorsSafeString(xmlSecNodeGetName(cur)),
                    XMLSEC_ERRORS_R_INVALID_NODE_ATTRIBUTE,
                    "HMAC output length is too small");
           return(-1);
        }

        cur = xmlSecGetNextElementNode(cur->next);
    }

    if(cur != NULL) {
        xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    xmlSecErrorsSafeString(xmlSecNodeGetName(cur)),
                    XMLSEC_ERRORS_R_INVALID_NODE,
                    "no nodes expected");
        return(-1);
    }
    return(0);
}
开发者ID:KonstantinDavidov，项目名称:xmlsec，代码行数:71，代码来源:hmac.c

示例10: xmlSecTransformXPathExecute

static int
xmlSecTransformXPathExecute(xmlSecTransformPtr transform, int last,
                            xmlSecTransformCtxPtr transformCtx) {
    xmlSecPtrListPtr dataList;
    xmlDocPtr doc;

    xmlSecAssert2(xmlSecTransformXPathCheckId(transform), -1);
    xmlSecAssert2(transform->hereNode != NULL, -1);
    xmlSecAssert2(transform->outNodes == NULL, -1);
    xmlSecAssert2(last != 0, -1);
    xmlSecAssert2(transformCtx != NULL, -1);

    dataList = xmlSecXPathTransformGetDataList(transform);
    xmlSecAssert2(xmlSecPtrListCheckId(dataList, xmlSecXPathDataListId), -1);
    xmlSecAssert2(xmlSecPtrListGetSize(dataList) > 0, -1);

    doc = (transform->inNodes != NULL) ? transform->inNodes->doc : transform->hereNode->doc;
    xmlSecAssert2(doc != NULL, -1);

    transform->outNodes = xmlSecXPathDataListExecute(dataList, doc,
                                transform->hereNode, transform->inNodes);
    if(transform->outNodes == NULL) {
        xmlSecInternalError("xmlSecXPathDataExecute",
                            xmlSecTransformGetName(transform));
        return(-1);
    }
    return(0);
}
开发者ID:esproul，项目名称:xmlsec，代码行数:28，代码来源:xpath.c

示例11: xmlSecMSCryptoRsaPkcs1SetKey

static int  	
xmlSecMSCryptoRsaPkcs1SetKey(xmlSecTransformPtr transform, xmlSecKeyPtr key) {
    xmlSecMSCryptoRsaPkcs1CtxPtr ctx;
    
    xmlSecAssert2(xmlSecTransformCheckId(transform, xmlSecMSCryptoTransformRsaPkcs1Id), -1);
    xmlSecAssert2((transform->operation == xmlSecTransformOperationEncrypt) || (transform->operation == xmlSecTransformOperationDecrypt), -1);
    xmlSecAssert2(xmlSecTransformCheckSize(transform, xmlSecMSCryptoRsaPkcs1Size), -1);
    xmlSecAssert2(key != NULL, -1);
    xmlSecAssert2(xmlSecKeyDataCheckId(xmlSecKeyGetValue(key), xmlSecMSCryptoKeyDataRsaId), -1);

    ctx = xmlSecMSCryptoRsaPkcs1GetCtx(transform);
    xmlSecAssert2(ctx != NULL, -1);
    xmlSecAssert2(ctx->data == NULL, -1);

    ctx->data = xmlSecKeyDataDuplicate(xmlSecKeyGetValue(key));
    if(ctx->data == NULL) {
	xmlSecErr_a_ignorar5(XMLSEC_ERRORS_HERE,
		    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
		    "xmlSecKeyDataDuplicate",
		    XMLSEC_ERRORS_R_XMLSEC_FAILED,
		    XMLSEC_ERRORS_NO_MESSAGE);
	return(-1);
    }

    return(0);
}
开发者ID:Arcenciel，项目名称:DDReader，代码行数:26，代码来源:kt_rsa.c

示例12: xmlSecTransformXPathExecute

static int
xmlSecTransformXPathExecute(xmlSecTransformPtr transform, int last,
                            xmlSecTransformCtxPtr transformCtx) {
    xmlSecPtrListPtr dataList;
    xmlDocPtr doc;

    xmlSecAssert2(xmlSecTransformXPathCheckId(transform), -1);
    xmlSecAssert2(transform->hereNode != NULL, -1);
    xmlSecAssert2(transform->outNodes == NULL, -1);
    xmlSecAssert2(last != 0, -1);
    xmlSecAssert2(transformCtx != NULL, -1);

    dataList = xmlSecXPathTransformGetDataList(transform);
    xmlSecAssert2(xmlSecPtrListCheckId(dataList, xmlSecXPathDataListId), -1);
    xmlSecAssert2(xmlSecPtrListGetSize(dataList) > 0, -1);

    doc = (transform->inNodes != NULL) ? transform->inNodes->doc : transform->hereNode->doc;
    xmlSecAssert2(doc != NULL, -1);

    transform->outNodes = xmlSecXPathDataListExecute(dataList, doc,
                                transform->hereNode, transform->inNodes);
    if(transform->outNodes == NULL) {
        xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    "xmlSecXPathDataExecute",
                    XMLSEC_ERRORS_R_XMLSEC_FAILED,
                    XMLSEC_ERRORS_NO_MESSAGE);
        return(-1);
    }
    return(0);
}
开发者ID:patpenetrante，项目名称:xmlsec，代码行数:31，代码来源:xpath.c

示例13: xmlSecMSCngSignatureSetKey

static int xmlSecMSCngSignatureSetKey(xmlSecTransformPtr transform, xmlSecKeyPtr key) {
    xmlSecMSCngSignatureCtxPtr ctx;
    xmlSecKeyDataPtr value;

    xmlSecAssert2(xmlSecMSCngSignatureCheckId(transform), -1);
    xmlSecAssert2((transform->operation == xmlSecTransformOperationSign) || (transform->operation == xmlSecTransformOperationVerify), -1);
    xmlSecAssert2(xmlSecTransformCheckSize(transform, xmlSecMSCngSignatureSize), -1);
    xmlSecAssert2(key != NULL, -1);

    ctx = xmlSecMSCngSignatureGetCtx(transform);
    xmlSecAssert2(ctx != NULL, -1);
    xmlSecAssert2(ctx->keyId != NULL, -1);
    xmlSecAssert2(ctx->pszHashAlgId != 0, -1);
    xmlSecAssert2(xmlSecKeyCheckId(key, ctx->keyId), -1);

    value = xmlSecKeyGetValue(key);
    xmlSecAssert2(value != NULL, -1);

    ctx->data = xmlSecKeyDataDuplicate(value);
    if(ctx->data == NULL) {
        xmlSecInternalError("xmlSecKeyDataDuplicate",
                            xmlSecTransformGetName(transform));
        return(-1);
    }

    return(0);
}
开发者ID:esproul，项目名称:xmlsec，代码行数:27，代码来源:signatures.c

示例14: xmlSecOpenSSLEvpSignatureSetKey

static int
xmlSecOpenSSLEvpSignatureSetKey(xmlSecTransformPtr transform, xmlSecKeyPtr key) {
    xmlSecOpenSSLEvpSignatureCtxPtr ctx;
    xmlSecKeyDataPtr value;
    EVP_PKEY* pKey;

    xmlSecAssert2(xmlSecOpenSSLEvpSignatureCheckId(transform), -1);
    xmlSecAssert2((transform->operation == xmlSecTransformOperationSign) || (transform->operation == xmlSecTransformOperationVerify), -1);
    xmlSecAssert2(xmlSecTransformCheckSize(transform, xmlSecOpenSSLEvpSignatureSize), -1);
    xmlSecAssert2(key != NULL, -1);

    ctx = xmlSecOpenSSLEvpSignatureGetCtx(transform);
    xmlSecAssert2(ctx != NULL, -1);
    xmlSecAssert2(ctx->digest != NULL, -1);
    xmlSecAssert2(ctx->keyId != NULL, -1);
    xmlSecAssert2(xmlSecKeyCheckId(key, ctx->keyId), -1);

    value = xmlSecKeyGetValue(key);
    xmlSecAssert2(value != NULL, -1);

    pKey = xmlSecOpenSSLEvpKeyDataGetEvp(value);
    if(pKey == NULL) {
        xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    "xmlSecOpenSSLEvpKeyDataGetEvp",
                    XMLSEC_ERRORS_R_XMLSEC_FAILED,
                    XMLSEC_ERRORS_NO_MESSAGE);
        return(-1);
    }

    if(ctx->pKey != NULL) {
        EVP_PKEY_free(ctx->pKey);
    }

    ctx->pKey = xmlSecOpenSSLEvpKeyDup(pKey);
    if(ctx->pKey == NULL) {
        xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    "xmlSecOpenSSLEvpKeyDup",
                    XMLSEC_ERRORS_R_XMLSEC_FAILED,
                    XMLSEC_ERRORS_NO_MESSAGE);
        return(-1);
    }

    return(0);
}
开发者ID:paracycle，项目名称:xmlsec-shim，代码行数:46，代码来源:signatures.c

示例15: xmlSecGCryptKWAesInitialize

static int
xmlSecGCryptKWAesInitialize(xmlSecTransformPtr transform) {
    xmlSecGCryptKWAesCtxPtr ctx;
    int ret;

    xmlSecAssert2(xmlSecGCryptKWAesCheckId(transform), -1);
    xmlSecAssert2(xmlSecTransformCheckSize(transform, xmlSecGCryptKWAesSize), -1);

    ctx = xmlSecGCryptKWAesGetCtx(transform);
    xmlSecAssert2(ctx != NULL, -1);

    if(xmlSecTransformCheckId(transform, xmlSecGCryptTransformKWAes128Id)) {
        ctx->cipher             = GCRY_CIPHER_AES128;
        ctx->keyExpectedSize    = XMLSEC_KW_AES128_KEY_SIZE;
    } else if(xmlSecTransformCheckId(transform, xmlSecGCryptTransformKWAes192Id)) {
        ctx->cipher             = GCRY_CIPHER_AES192;
        ctx->keyExpectedSize    = XMLSEC_KW_AES192_KEY_SIZE;
    } else if(xmlSecTransformCheckId(transform, xmlSecGCryptTransformKWAes256Id)) {
        ctx->cipher             = GCRY_CIPHER_AES256;
        ctx->keyExpectedSize    = XMLSEC_KW_AES256_KEY_SIZE;
    } else {
        xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    NULL,
                    XMLSEC_ERRORS_R_INVALID_TRANSFORM,
                    XMLSEC_ERRORS_NO_MESSAGE);
        return(-1);
    }
    ctx->mode           = GCRY_CIPHER_MODE_CBC;
    ctx->flags          = GCRY_CIPHER_SECURE; /* we are paranoid */
    ctx->blockSize      = gcry_cipher_get_algo_blklen(ctx->cipher);
    xmlSecAssert2(ctx->blockSize > 0, -1);

    ret = xmlSecBufferInitialize(&(ctx->keyBuffer), 0);
    if(ret < 0) {
        xmlSecError(XMLSEC_ERRORS_HERE,
                    xmlSecErrorsSafeString(xmlSecTransformGetName(transform)),
                    "xmlSecGCryptKWAesGetKey",
                    XMLSEC_ERRORS_R_XMLSEC_FAILED,
                    XMLSEC_ERRORS_NO_MESSAGE);
        return(-1);
    }

    return(0);
}
开发者ID:dhyannataraj，项目名称:xmlsec-for-nataraj，代码行数:45，代码来源:kw_aes.c


注：本文中的xmlSecTransformGetName函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。