当前位置: 首页>>代码示例>>C++>>正文


C++ xen_setup_runstate_info函数代码示例

本文整理汇总了C++中xen_setup_runstate_info函数的典型用法代码示例。如果您正苦于以下问题:C++ xen_setup_runstate_info函数的具体用法?C++ xen_setup_runstate_info怎么用?C++ xen_setup_runstate_info使用的例子?那么, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了xen_setup_runstate_info函数的13个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: xen_hvm_setup_cpu_clockevents

static void xen_hvm_setup_cpu_clockevents(void)
{
	int cpu = smp_processor_id();
	xen_setup_runstate_info(cpu);
	xen_setup_timer(cpu);
	xen_setup_cpu_clockevents();
}
开发者ID:openube,项目名称:android_kernel_sony_c2305,代码行数:7,代码来源:time.c

示例2: xen_pv_cpu_up

static int xen_pv_cpu_up(unsigned int cpu, struct task_struct *idle)
{
	int rc;

	common_cpu_up(cpu, idle);

	xen_setup_runstate_info(cpu);

	/*
	 * PV VCPUs are always successfully taken down (see 'while' loop
	 * in xen_cpu_die()), so -EBUSY is an error.
	 */
	rc = cpu_check_up_prepare(cpu);
	if (rc)
		return rc;

	/* make sure interrupts start blocked */
	per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1;

	rc = cpu_initialize_context(cpu, idle);
	if (rc)
		return rc;

	xen_pmu_init(cpu);

	rc = HYPERVISOR_vcpu_op(VCPUOP_up, xen_vcpu_nr(cpu), NULL);
	BUG_ON(rc);

	while (cpu_report_state(cpu) != CPU_ONLINE)
		HYPERVISOR_sched_op(SCHEDOP_yield, NULL);

	return 0;
}
开发者ID:EMCAntimatter,项目名称:linux,代码行数:33,代码来源:smp_pv.c

示例3: xen_hvm_setup_cpu_clockevents

static void xen_hvm_setup_cpu_clockevents(void)
{
	int cpu = smp_processor_id();
	xen_setup_runstate_info(cpu);
	/*
	 * xen_setup_timer(cpu) - snprintf is bad in atomic context. Hence
	 * doing it xen_hvm_cpu_notify (which gets called by smp_init during
	 * early bootup and also during CPU hotplug events).
	 */
	xen_setup_cpu_clockevents();
}
开发者ID:AdrianHuang,项目名称:linux-3.8.13,代码行数:11,代码来源:time.c

示例4: xen_hvm_post_suspend

void xen_hvm_post_suspend(int suspend_cancelled)
{
	int cpu;
	xen_hvm_init_shared_info();
	xen_callback_vector();
	if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
		for_each_online_cpu(cpu) {
			xen_setup_runstate_info(cpu);
		}
	}
}
开发者ID:1703011,项目名称:asuswrt-merlin,代码行数:11,代码来源:suspend.c

示例5: xen_hvm_post_suspend

static void xen_hvm_post_suspend(int suspend_cancelled)
{
#ifdef CONFIG_XEN_PVHVM
	int cpu;
	xen_hvm_init_shared_info();
	xen_callback_vector();
	xen_unplug_emulated_devices();
	if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
		for_each_online_cpu(cpu) {
			xen_setup_runstate_info(cpu);
		}
	}
#endif
}
开发者ID:Abhi1919,项目名称:ath,代码行数:14,代码来源:suspend.c

示例6: xen_cpu_up

static int __cpuinit xen_cpu_up(unsigned int cpu)
{
	struct task_struct *idle = idle_task(cpu);
	int rc;

	per_cpu(current_task, cpu) = idle;
#ifdef CONFIG_X86_32
	irq_ctx_init(cpu);
#else
	clear_tsk_thread_flag(idle, TIF_FORK);
	per_cpu(kernel_stack, cpu) =
		(unsigned long)task_stack_page(idle) -
		KERNEL_STACK_OFFSET + THREAD_SIZE;
	per_cpu(kernel_stack8k, cpu) =
		(unsigned long)task_stack_page(idle) -
		KERNEL_STACK_OFFSET + THREAD_SIZE - 8192;
#endif
	xen_setup_runstate_info(cpu);
	xen_setup_timer(cpu);
	xen_init_lock_cpu(cpu);

	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;

	/* make sure interrupts start blocked */
	per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1;

	rc = cpu_initialize_context(cpu, idle);
	if (rc)
		return rc;

	if (num_online_cpus() == 1)
		alternatives_smp_switch(1);

	rc = xen_smp_intr_init(cpu);
	if (rc)
		return rc;

	rc = HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL);
	BUG_ON(rc);

	while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
		HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
		barrier();
	}

	return 0;
}
开发者ID:seyko2,项目名称:openvz_rhel6_kernel_mirror,代码行数:47,代码来源:smp.c

示例7: xen_cpu_up

static int __cpuinit xen_cpu_up(unsigned int cpu, struct task_struct *idle)
{
	int rc;

	per_cpu(current_task, cpu) = idle;
	per_cpu(current_tinfo, cpu) = &idle->tinfo;
#ifdef CONFIG_X86_32
	irq_ctx_init(cpu);
#else
	clear_tsk_thread_flag(idle, TIF_FORK);
	per_cpu(kernel_stack, cpu) = (unsigned long)task_stack_page(idle) - 16 + THREAD_SIZE;
#endif
	xen_setup_runstate_info(cpu);
	xen_setup_timer(cpu);
	xen_init_lock_cpu(cpu);

	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;

	/* make sure interrupts start blocked */
	per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1;

	rc = cpu_initialize_context(cpu, idle);
	if (rc)
		return rc;

	if (num_online_cpus() == 1)
		/* Just in case we booted with a single CPU. */
		alternatives_enable_smp();

	rc = xen_smp_intr_init(cpu);
	if (rc)
		return rc;

	rc = HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL);
	BUG_ON(rc);

	while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
		HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
		barrier();
	}

	return 0;
}
开发者ID:garyvan,项目名称:openwrt-1.6,代码行数:43,代码来源:smp.c

示例8: xen_vcpu_restore

/*
 * On restore, set the vcpu placement up again.
 * If it fails, then we're in a bad state, since
 * we can't back out from using it...
 */
void xen_vcpu_restore(void)
{
	int cpu;

	for_each_online_cpu(cpu) {
		bool other_cpu = (cpu != smp_processor_id());

		if (other_cpu &&
		    HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL))
			BUG();

		xen_setup_runstate_info(cpu);

		if (have_vcpu_info_placement)
			xen_vcpu_setup(cpu);

		if (other_cpu &&
		    HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL))
			BUG();
	}
}
开发者ID:PivotalBigData,项目名称:PivotalHD,代码行数:26,代码来源:enlighten.c

示例9: xen_time_init

static void __init xen_time_init(void)
{
	int cpu = smp_processor_id();
	struct timespec tp;

	clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC);

	if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
		printk(KERN_DEBUG "Xen: using vcpuop timer interface\n");
		xen_clockevent = &xen_vcpuop_clockevent;
	}

	
	xen_read_wallclock(&tp);
	do_settimeofday(&tp);

	setup_force_cpu_cap(X86_FEATURE_TSC);

	xen_setup_runstate_info(cpu);
	xen_setup_timer(cpu);
	xen_setup_cpu_clockevents();
}
开发者ID:DirtyDroidX,项目名称:android_kernel_htc_m8ul,代码行数:22,代码来源:time.c

示例10: xen_time_init

static void __init xen_time_init(void)
{
	int cpu = smp_processor_id();
	struct timespec tp;

	clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC);

	if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
		/* Successfully turned off 100Hz tick, so we have the
		   vcpuop-based timer interface */
		printk(KERN_DEBUG "Xen: using vcpuop timer interface\n");
		xen_clockevent = &xen_vcpuop_clockevent;
	}

	/* Set initial system time with full resolution */
	xen_read_wallclock(&tp);
	do_settimeofday(&tp);

	setup_force_cpu_cap(X86_FEATURE_TSC);

	xen_setup_runstate_info(cpu);
	xen_setup_timer(cpu);
	xen_setup_cpu_clockevents();
}
开发者ID:openube,项目名称:android_kernel_sony_c2305,代码行数:24,代码来源:time.c

示例11: xen_time_init

__init void xen_time_init(void)
{
	int cpu = smp_processor_id();

	clocksource_register(&xen_clocksource);

	if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
		/* Successfully turned off 100Hz tick, so we have the
		   vcpuop-based timer interface */
		printk(KERN_DEBUG "Xen: using vcpuop timer interface\n");
		xen_clockevent = &xen_vcpuop_clockevent;
	}

	/* Set initial system time with full resolution */
	xen_read_wallclock(&xtime);
	set_normalized_timespec(&wall_to_monotonic,
				-xtime.tv_sec, -xtime.tv_nsec);

	setup_force_cpu_cap(X86_FEATURE_TSC);

	xen_setup_runstate_info(cpu);
	xen_setup_timer(cpu);
	xen_setup_cpu_clockevents();
}
开发者ID:325116067,项目名称:semc-qsd8x50,代码行数:24,代码来源:time.c

示例12: xen_setup_timer

void xen_setup_timer(int cpu)
{
	const char *name;
	struct clock_event_device *evt;
	int irq;

	printk(KERN_INFO "installing Xen timer for CPU %d\n", cpu);

	name = kasprintf(GFP_KERNEL, "timer%d", cpu);
	if (!name)
		name = "<timer kasprintf failed>";

	irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt,
				      IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING|IRQF_TIMER,
				      name, NULL);

	evt = &per_cpu(xen_clock_events, cpu);
	memcpy(evt, xen_clockevent, sizeof(*evt));

	evt->cpumask = cpumask_of(cpu);
	evt->irq = irq;

	xen_setup_runstate_info(cpu);
}
开发者ID:kaustubh-kabra,项目名称:xenified-jeremy-kernel-,代码行数:24,代码来源:time.c

示例13: xen_start_kernel


//.........这里部分代码省略.........
	__userpte_alloc_gfp &= ~__GFP_HIGHMEM;

#ifdef CONFIG_X86_64
	/* Work out if we support NX */
	check_efer();
#endif

	xen_setup_features();

	/* Get mfn list */
	if (!xen_feature(XENFEAT_auto_translated_physmap))
		xen_build_dynamic_phys_to_machine();

	/*
	 * Set up kernel GDT and segment registers, mainly so that
	 * -fstack-protector code can be executed.
	 */
	xen_setup_stackprotector();

	xen_init_irq_ops();
	xen_init_cpuid_mask();

#ifdef CONFIG_X86_LOCAL_APIC
	/*
	 * set up the basic apic ops.
	 */
	set_xen_basic_apic_ops();
#endif

	if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
		pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
		pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
	}

	machine_ops = xen_machine_ops;

	/*
	 * The only reliable way to retain the initial address of the
	 * percpu gdt_page is to remember it here, so we can go and
	 * mark it RW later, when the initial percpu area is freed.
	 */
	xen_initial_gdt = &per_cpu(gdt_page, 0);

	xen_smp_init();

	pgd = (pgd_t *)xen_start_info->pt_base;

	/* Don't do the full vcpu_info placement stuff until we have a
	   possible map and a non-dummy shared_info. */
	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];

	local_irq_disable();
	early_boot_irqs_off();

	xen_raw_console_write("mapping kernel into physical memory\n");
	pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);

	init_mm.pgd = pgd;

	/* keep using Xen gdt for now; no urgent need to change it */

	pv_info.kernel_rpl = 1;
	if (xen_feature(XENFEAT_supervisor_mode_kernel))
		pv_info.kernel_rpl = 0;

	/* set the limit of our address space */
	xen_reserve_top();

#ifdef CONFIG_X86_32
	/* set up basic CPUID stuff */
	cpu_detect(&new_cpu_data);
	new_cpu_data.hard_math = 1;
	new_cpu_data.wp_works_ok = 1;
	new_cpu_data.x86_capability[0] = cpuid_edx(1);
#endif

	/* Poke various useful things into boot_params */
	boot_params.hdr.type_of_loader = (9 << 4) | 0;
	boot_params.hdr.ramdisk_image = xen_start_info->mod_start
		? __pa(xen_start_info->mod_start) : 0;
	boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
	boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);

	if (!xen_initial_domain()) {
		add_preferred_console("xenboot", 0, NULL);
		add_preferred_console("tty", 0, NULL);
		add_preferred_console("hvc", 0, NULL);
	}

	xen_raw_console_write("about to get started...\n");

	xen_setup_runstate_info(0);

	/* Start the world */
#ifdef CONFIG_X86_32
	i386_start_kernel();
#else
	x86_64_start_reservations((char *)__pa_symbol(&boot_params));
#endif
}
开发者ID:ArthySundaram,项目名称:firstrepo,代码行数:101,代码来源:enlighten.c


注:本文中的xen_setup_runstate_info函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。