当前位置: 首页>>代码示例>>C++>>正文

C++ write_cmd函数代码示例

本文整理汇总了C++中write_cmd函数的典型用法代码示例。如果您正苦于以下问题：C++ write_cmd函数的具体用法？C++ write_cmd怎么用？C++ write_cmd使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了write_cmd函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: set_orientation

void set_orientation(orientation o)
{
	display.orient = o;
	write_cmd(MEMORY_ACCESS_CONTROL);
	if (o==North) { 
		display.width = LCDWIDTH;
		display.height = LCDHEIGHT;
		write_data(0x48);
	}
	else if (o==West) {
		display.width = LCDHEIGHT;
		display.height = LCDWIDTH;
		write_data(0xE8);
	}
	else if (o==South) {
		display.width = LCDWIDTH;
		display.height = LCDHEIGHT;
		write_data(0x88);
	}
	else if (o==East) {
		display.width = LCDHEIGHT;
		display.height = LCDWIDTH;
		write_data(0x28);
	}
	write_cmd(COLUMN_ADDRESS_SET);
	write_data16(0);
	write_data16(display.width-1);
	write_cmd(PAGE_ADDRESS_SET);
	write_data16(0);
	write_data16(display.height-1);
}
开发者ID:jake314159，项目名称:avr-snake，代码行数:31，代码来源:lcd.c

示例2: set_xy

/***********************************************************
*   函数名称：
*   功能描述：   OLED设置坐标
*   参数列表：
*   返回结果：
*   备    注：
***********************************************************/
void OLED_SSD1306::
set_xy(uint16_t x, uint16_t y)
{
    write_cmd(0xb0 + y);
    write_cmd(((x & 0xf0) >> 4) | 0x10);
    write_cmd((x & 0x0f) | 0x01);
}
开发者ID:0x1abin，项目名称:ebox_stm32，代码行数:14，代码来源:OLED_ssd1306.cpp

示例3: ili9341fb_set_addr_win

void ili9341fb_set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
    uint8_t xsl, xsh, xel, xeh, ysl, ysh, yel, yeh;
    u16 *p = (u16 *)par->buf;
    int i = 0;

    fbtft_dev_dbg(DEBUG_SET_ADDR_WIN, par->info->device, "%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe, ye);

    xsl = (uint8_t)(xs & 0xff);
    xsh = (uint8_t)((xs >> 8) & 0xff);
    xel = (uint8_t)(xe & 0xff);
    xeh = (uint8_t)((xe >> 8) & 0xff);

    ysl = (uint8_t)(ys & 0xff);
    ysh = (uint8_t)((ys >> 8) & 0xff);
    yel = (uint8_t)(ye & 0xff);
    yeh = (uint8_t)((ye >> 8) & 0xff);

    write_cmd(par, FBTFT_CASET);
    write_data(par, xsh);
    write_data(par, xsl);
    write_data(par, xeh);
    write_data(par, xel);

    write_cmd(par, FBTFT_RASET);
    write_data(par, ysh);
    write_data(par, ysl);
    write_data(par, yeh);
    write_data(par, yel);

    write_cmd(par, FBTFT_RAMWR);

    write_flush(par);
}
开发者ID:cnvogelg，项目名称:fbtft，代码行数:34，代码来源:ili9341fb.c

示例4: lcd_l602init

void lcd_l602init()//1602初始化
{
	EN=0;
	write_cmd(0x38);//设置16*2显示	
	write_cmd(0x0c);//显示器开，光标开
	write_cmd(0x06);//写一个字符后地址加1
	write_cmd(0x01);//显示清0,DPTR清0

}
开发者ID:xiaobai1993，项目名称:Voice-calculator，代码行数:9，代码来源:1602.c

示例5: conax_do_emm

static int32_t conax_do_emm(struct s_reader * reader, EMM_PACKET *ep)
{
  def_resp;
  unsigned char insCA[]  = { 0xDD,0xCA,0x00,0x00,0x00 };
  unsigned char insEMM[] = { 0xDD,0x84,0x00,0x00,0x00 };
  unsigned char buf[255];
  int32_t rc=0;

  const int32_t l = ep->emm[2];

  insEMM[4]=l+5;
  buf[0]=0x12;
  buf[1]=l+3;
  memcpy(buf+2, ep->emm, buf[1]);
  write_cmd(insEMM, buf);

  if (cta_res[0] == 0x98) {
    insCA[4] = cta_res[1];
    write_cmd(insCA, NULL);
  }

  rc=((cta_res[0]==0x90)&&(cta_res[1]==0x00));

  if (rc)
    return OK;
  else
    return ERROR;
}
开发者ID:knasson，项目名称:oscam-emu，代码行数:28，代码来源:reader-conax.c

示例6: display_char

void display_char(char c)
{
	uint16_t x, y;
	PGM_P fdata; 
	uint8_t bits, mask;
	uint16_t sc=display.x, ec=display.x + 4, sp=display.y, ep=display.y + 7;
	if (c < 32 || c > 126) return;
	fdata = (c - ' ')*5 + font5x7;
	write_cmd(PAGE_ADDRESS_SET);
	write_data16(sp);
	write_data16(ep);
	for(x=sc; x<=ec; x++) {
		write_cmd(COLUMN_ADDRESS_SET);
		write_data16(x);
		write_data16(x);
		write_cmd(MEMORY_WRITE);
		bits = pgm_read_byte(fdata++);
		for(y=sp, mask=0x01; y<=ep; y++, mask<<=1)
			write_data16((bits & mask) ? display.foreground : display.background);
	}
	write_cmd(COLUMN_ADDRESS_SET);
	write_data16(x);
	write_data16(x);
	write_cmd(MEMORY_WRITE);
	for(y=sp; y<=ep; y++)
		write_data16(display.background);

	display.x += 6;
	if (display.x >= display.width) { display.x=0; display.y+=8; }
}
开发者ID:arian009，项目名称:GroupG，代码行数:30，代码来源:lcd.c

示例7: gdisp_lld_flush

	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
		uint8_t * ram;
		unsigned pages;

		// Don't flush if we don't need it.
		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
			return;
		ram = RAM(g);
		pages = GDISP_SCREEN_HEIGHT/8;

		acquire_bus(g);
		write_cmd(g, SSD1306_SETSTARTLINE | 0);

		while (pages--) {
			#if SSD1306_SH1106
				write_cmd(g, SSD1306_PAM_PAGE_START + (7 - pages));
				write_cmd(g, SSD1306_SETLOWCOLUMN + 2);
				write_cmd(g, SSD1306_SETHIGHCOLUMN);
			#endif

			write_data(g, ram, SSD1306_PAGE_WIDTH);
			ram += SSD1306_PAGE_WIDTH;
		}
		release_bus(g);

		g->flags &= ~GDISP_FLG_NEEDFLUSH;
	}
开发者ID:yusp75，项目名称:pellet-stove-control，代码行数:27，代码来源:gdisp_lld_SSD1306.c

示例8: tdisp_lld_control

void tdisp_lld_control(uint16_t what, void *value) {
	switch(what) {
		case TDISP_CTRL_BACKLIGHT:
			if ((uint8_t)value)
				displaycontrol |= DISPLAY_ON;
			else
				displaycontrol &= ~DISPLAY_ON;
			write_cmd(0x08 | displaycontrol);
			break;
		case TDISP_CTRL_CURSOR:
			switch((cursorshape)value) {
			case cursorOff:
				displaycontrol &= ~CURSOR_ON;
				break;
			case cursorBlock:
			case cursorUnderline:
			case cursorBar:
				displaycontrol = (displaycontrol | CURSOR_ON) & ~CURSOR_BLINK;
				break;
			case cursorBlinkingBlock:
			case cursorBlinkingUnderline:
			case cursorBlinkingBar:
			default:
				displaycontrol |= (CURSOR_ON | CURSOR_BLINK);
				break;
			}
			write_cmd(0x08 | displaycontrol);
			break;
	}
}
开发者ID:niamster，项目名称:ChibiOS-GFX，代码行数:30，代码来源:tdisp_lld.c

示例9: OLED_Display_Off

//关闭OLED显示
void OLED_Display_Off(void)
{
	write_cmd(0X8D);  //SET DCDC命令
	write_cmd(0X10);  //DCDC OFF
	write_cmd(0XAE);  //DISPLAY OFF
	Set_OLED_VDD;
	Set_OLED_VBAT;
}
开发者ID:nachiram，项目名称:audio-analyzer_zedboard，代码行数:9，代码来源:oled.c

示例10: goxy

void goxy(unsigned char y,unsigned char x)
{
	if(y==1)
		write_cmd(0x80|x);
	if(y==2)
		write_cmd(x-(0x40));

}
开发者ID:super-1943，项目名称:MCU，代码行数:8，代码来源:main.c

示例11: blank

static int blank(struct fbtft_par *par, bool on)
{
	fbtft_dev_dbg(DEBUG_BLANK, par->info->device, "%s(blank=%s)\n", __func__, on ? "true" : "false");
	if (on)
		write_cmd(par, 0xAE);
	else
		write_cmd(par, 0xAF);
	return 0;
}
开发者ID:cnvogelg，项目名称:fbtft，代码行数:9，代码来源:ssd1351fb.c

示例12: tdisp_lld_control

/* Write display control commands to the display */
void tdisp_lld_control(uint16_t what, uint16_t value) {
	switch(what) {
		      case TDISP_CTRL_DISPLAY:
				switch (value) {
					case displayOff:
						displaycontrol &= ~TDISP_DISPLAY_ON;
						break;
					case displayOn:
						displaycontrol |= TDISP_DISPLAY_ON;
						break;
				}
				write_cmd(0x08 | displaycontrol);
				break;
		      case TDISP_CTRL_CURSOR:
				switch (value) {
					case cursorBlinkingBlock:
					case cursorBlinkingUnderline:
					case cursorBlinkingBar:
						displaycontrol |= TDISP_CURSOR_ON + TDISP_CURSOR_BLINK;
						break;
					case cursorBlock:
					case cursorUnderline:
					case cursorBar:
						displaycontrol = (displaycontrol | TDISP_CURSOR_ON) & ~TDISP_CURSOR_BLINK;
						break;
					case cursorOff:
					default:
						displaycontrol &= ~(TDISP_CURSOR_ON | TDISP_CURSOR_BLINK); // zet alleen de cursor uit. Bewaar de overige instellingen
						break;
				}
				write_cmd(0x08 | displaycontrol);
				break;
			case TDISP_CTRL_MOVE:
				switch (value) {
					case cursorIncrease:
						cursorcontrol |= TDISP_CURSOR_INC; // increase cursor position
						break;
					case cursorDecrease:
						cursorcontrol &= ~TDISP_CURSOR_INC; // decrease cursor position
						break;
				}
				write_cmd(0x04 | cursorcontrol);
				break;
			case TDISP_CTRL_SHIFT:
				switch (value) {
					case shiftOn:
						cursorcontrol |= TDISP_SHIFT_ON;
						break;
					case shiftOff:
						cursorcontrol &= ~TDISP_SHIFT_ON;
						break;
				}
				write_cmd(0x04 | cursorcontrol);
				break;
	}
}
开发者ID:abhishek-kakkar，项目名称:ChibiOS-GFX，代码行数:57，代码来源:tdisp_lld.c

示例13: write_cmd

/*-----------------------------------------------------------------------
LCD_clear         : LCD清屏函数
-----------------------------------------------------------------------*/
void NOKIA5110::clear(void)
  {
    unsigned int i = 0;

    write_cmd(0x0c);			
    write_cmd(0x80);			

    for (i=0; i<504; i++)
      write_data(0);			
  }
开发者ID:Xcping2013，项目名称:ebox_stm32，代码行数:13，代码来源:Nokia5110.cpp

示例14: lcd_init

/*LCD?????*/
void lcd_init()
{
	LCD_PSB=1;
	write_cmd(0x30);
	delay_1ms(5);
	write_cmd(0x0C);
	delay_1ms(5);
	write_cmd(0x01);
	delay_1ms(5);
}
开发者ID:linqinghuang，项目名称:sourcecode，代码行数:11，代码来源:Test12864.c

示例15: gdisp_lld_write_start

	LLDSPEC	void gdisp_lld_write_start(GDisplay *g) {
		acquire_bus(g);
		write_cmd(g, SSD1327_SET_COLUMN_ADDRESS);
		write_data(g, g->p.x);
		write_data(g, g->p.x + g->p.cx - 1);
		write_cmd(g, SSD1327_SET_ROW_ADDRESS);
		write_data(g, g->p.y);
		write_data(g, g->p.y + g->p.cy - 1);
		write_cmd(g, SSD1327_WRITE_RAM);
	}
开发者ID:cosmikwolf，项目名称:ArduinoLibraries，代码行数:10，代码来源:gdisp_lld_SSD1327.c


注：本文中的write_cmd函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。