当前位置: 首页>>代码示例>>C++>>正文

C++ wm8350_reg_read函数代码示例

本文整理汇总了C++中wm8350_reg_read函数的典型用法代码示例。如果您正苦于以下问题：C++ wm8350_reg_read函数的具体用法？C++ wm8350_reg_read怎么用？C++ wm8350_reg_read使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了wm8350_reg_read函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: wm8350_dcdc_set_suspend_enable

static int wm8350_dcdc_set_suspend_enable(struct regulator_dev *rdev)
{
	struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
	int dcdc = rdev_get_id(rdev);
	u16 val;

	switch (dcdc) {
	case WM8350_DCDC_1:
		val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER)
			& ~WM8350_DCDC_HIB_MODE_MASK;
		wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER,
			val | wm8350->pmic.dcdc1_hib_mode);
		break;
	case WM8350_DCDC_3:
		val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER)
			& ~WM8350_DCDC_HIB_MODE_MASK;
		wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER,
			val | wm8350->pmic.dcdc3_hib_mode);
		break;
	case WM8350_DCDC_4:
		val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER)
			& ~WM8350_DCDC_HIB_MODE_MASK;
		wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER,
			val | wm8350->pmic.dcdc4_hib_mode);
		break;
	case WM8350_DCDC_6:
		val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER)
			& ~WM8350_DCDC_HIB_MODE_MASK;
		wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER,
			val | wm8350->pmic.dcdc6_hib_mode);
		break;
	case WM8350_DCDC_2:
	case WM8350_DCDC_5:
	default:
		return -EINVAL;
	}

	return 0;
}
开发者ID:19Dan01，项目名称:linux，代码行数:39，代码来源:wm8350-regulator.c

示例2: wm8350_ldo_set_voltage

static int wm8350_ldo_set_voltage(struct regulator_dev *rdev, int min_uV,
				  int max_uV, unsigned *selector)
{
	struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
	int volt_reg, ldo = rdev_get_id(rdev), mV, min_mV = min_uV / 1000,
		max_mV = max_uV / 1000;
	u16 val;

	if (min_mV < 900 || min_mV > 3300)
		return -EINVAL;
	if (max_mV < 900 || max_mV > 3300)
		return -EINVAL;

	if (min_mV < 1800) {
		/* step size is 50mV < 1800mV */
		mV = (min_mV - 851) / 50;
		if (wm8350_ldo_val_to_mvolts(mV) > max_mV)
			return -EINVAL;
		BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV);
	} else {
		/* step size is 100mV > 1800mV */
		mV = ((min_mV - 1701) / 100) + 16;
		if (wm8350_ldo_val_to_mvolts(mV) > max_mV)
			return -EINVAL;
		BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV);
	}

	switch (ldo) {
	case WM8350_LDO_1:
		volt_reg = WM8350_LDO1_CONTROL;
		break;
	case WM8350_LDO_2:
		volt_reg = WM8350_LDO2_CONTROL;
		break;
	case WM8350_LDO_3:
		volt_reg = WM8350_LDO3_CONTROL;
		break;
	case WM8350_LDO_4:
		volt_reg = WM8350_LDO4_CONTROL;
		break;
	default:
		return -EINVAL;
	}

	*selector = mV;

	/* all LDOs have same mV bits */
	val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK;
	wm8350_reg_write(wm8350, volt_reg, val | mV);
	return 0;
}
开发者ID:andi34，项目名称:Dhollmen_Kernel，代码行数:51，代码来源:wm8350-regulator.c

示例3: show_headphone

static ssize_t show_headphone(struct device_driver *dev, char *buf)
{
	struct imx_3stack_priv *priv = &machine_priv;
	u16 reg;

	reg = wm8350_reg_read(priv->wm8350, WM8350_JACK_PIN_STATUS);

	if (reg & WM8350_JACK_R_LVL)
		strcpy(buf, "speaker\n");
	else
		strcpy(buf, "headphone\n");

	return strlen(buf);
}
开发者ID:YCsuperlife，项目名称:imx53_kernel，代码行数:14，代码来源:imx-3stack-wm8350.c

示例4: wm8350_wdt_kick

static int wm8350_wdt_kick(struct wm8350 *wm8350)
{
	int ret;
	u16 reg;

	mutex_lock(&wdt_mutex);

	reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
	ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);

	mutex_unlock(&wdt_mutex);

	return ret;
}
开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:14，代码来源:wm8350_wdt.c

示例5: wm8350_charger_config

static int wm8350_charger_config(struct wm8350 *wm8350,
				 struct wm8350_charger_policy *policy)
{
	u16 reg, eoc_mA, fast_limit_mA;

	if (!policy) {
		dev_warn(wm8350->dev,
			 "No charger policy, charger not configured.\n");
		return -EINVAL;
	}

	/* make sure USB fast charge current is not > 500mA */
	if (policy->fast_limit_USB_mA > 500) {
		dev_err(wm8350->dev, "USB fast charge > 500mA\n");
		return -EINVAL;
	}

	eoc_mA = WM8350_CHG_EOC_mA(policy->eoc_mA);

	wm8350_reg_unlock(wm8350);

	reg = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1)
		& WM8350_CHG_ENA_R168;
	wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1,
			 reg | eoc_mA | policy->trickle_start_mV |
			 WM8350_CHG_TRICKLE_TEMP_CHOKE |
			 WM8350_CHG_TRICKLE_USB_CHOKE |
			 WM8350_CHG_FAST_USB_THROTTLE);

	if (wm8350_get_supplies(wm8350) & WM8350_USB_SUPPLY) {
		fast_limit_mA =
			WM8350_CHG_FAST_LIMIT_mA(policy->fast_limit_USB_mA);
		wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2,
			    policy->charge_mV | policy->trickle_charge_USB_mA |
			    fast_limit_mA | wm8350_charge_time_min(wm8350,
						policy->charge_timeout));

	} else {
		fast_limit_mA =
			WM8350_CHG_FAST_LIMIT_mA(policy->fast_limit_mA);
		wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2,
			    policy->charge_mV | policy->trickle_charge_mA |
			    fast_limit_mA | wm8350_charge_time_min(wm8350,
						policy->charge_timeout));
	}

	wm8350_reg_lock(wm8350);
	return 0;
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:49，代码来源:wm8350_power.c

示例6: wm8350_dcdc25_set_suspend_disable

static int wm8350_dcdc25_set_suspend_disable(struct regulator_dev *rdev)
{
	struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
	int dcdc = rdev_get_id(rdev);
	u16 val;

	switch (dcdc) {
	case WM8350_DCDC_2:
		val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL)
		    & ~WM8350_DC2_HIB_MODE_MASK;
		wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val |
		    (WM8350_DC2_HIB_MODE_DISABLE << WM8350_DC2_HIB_MODE_SHIFT));
		break;
	case WM8350_DCDC_5:
		val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL)
		    & ~WM8350_DC5_HIB_MODE_MASK;
		wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val |
		    (WM8350_DC5_HIB_MODE_DISABLE << WM8350_DC5_HIB_MODE_SHIFT));
		break;
	default:
		return -EINVAL;
	}
	return 0;
}
开发者ID:19Dan01，项目名称:linux，代码行数:24，代码来源:wm8350-regulator.c

示例7: wm8350_wdt_ping

static int wm8350_wdt_ping(struct watchdog_device *wdt_dev)
{
	struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev);
	int ret;
	u16 reg;

	mutex_lock(&wdt_mutex);

	reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
	ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);

	mutex_unlock(&wdt_mutex);

	return ret;
}
开发者ID:19Dan01，项目名称:linux，代码行数:15，代码来源:wm8350_wdt.c

示例8: wm8350_bat_check_health

static int wm8350_bat_check_health(struct wm8350 *wm8350)
{
	u16 reg;

	if (wm8350_read_battery_uvolts(wm8350) < 2850000)
		return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;

	reg = wm8350_reg_read(wm8350, WM8350_CHARGER_OVERRIDES);
	if (reg & WM8350_CHG_BATT_HOT_OVRDE)
		return POWER_SUPPLY_HEALTH_OVERHEAT;

	if (reg & WM8350_CHG_BATT_COLD_OVRDE)
		return POWER_SUPPLY_HEALTH_COLD;

	return POWER_SUPPLY_HEALTH_GOOD;
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:16，代码来源:wm8350_power.c

示例9: wm8350_wdt_stop

static int wm8350_wdt_stop(struct wm8350 *wm8350)
{
	int ret;
	u16 reg;

	mutex_lock(&wdt_mutex);
	wm8350_reg_unlock(wm8350);

	reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
	reg &= ~WM8350_WDOG_MODE_MASK;
	ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);

	wm8350_reg_lock(wm8350);
	mutex_unlock(&wdt_mutex);

	return ret;
}
开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:17，代码来源:wm8350_wdt.c

示例10: wm8350_bat_get_charge_type

static int wm8350_bat_get_charge_type(struct wm8350 *wm8350)
{
	int state;

	state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) &
	    WM8350_CHG_STS_MASK;
	switch (state) {
	case WM8350_CHG_STS_OFF:
		return POWER_SUPPLY_CHARGE_TYPE_NONE;
	case WM8350_CHG_STS_TRICKLE:
		return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
	case WM8350_CHG_STS_FAST:
		return POWER_SUPPLY_CHARGE_TYPE_FAST;
	default:
		return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
	}
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:17，代码来源:wm8350_power.c

示例11: wm8350_dcdc_set_slot

int wm8350_dcdc_set_slot(struct wm8350 *wm8350, int dcdc, u16 start,
			 u16 stop, u16 fault)
{
	int slot_reg;
	u16 val;

	dev_dbg(wm8350->dev, "%s %d start %d stop %d\n",
		__func__, dcdc, start, stop);

	/* slot valid ? */
	if (start > 15 || stop > 15)
		return -EINVAL;

	switch (dcdc) {
	case WM8350_DCDC_1:
		slot_reg = WM8350_DCDC1_TIMEOUTS;
		break;
	case WM8350_DCDC_2:
		slot_reg = WM8350_DCDC2_TIMEOUTS;
		break;
	case WM8350_DCDC_3:
		slot_reg = WM8350_DCDC3_TIMEOUTS;
		break;
	case WM8350_DCDC_4:
		slot_reg = WM8350_DCDC4_TIMEOUTS;
		break;
	case WM8350_DCDC_5:
		slot_reg = WM8350_DCDC5_TIMEOUTS;
		break;
	case WM8350_DCDC_6:
		slot_reg = WM8350_DCDC6_TIMEOUTS;
		break;
	default:
		return -EINVAL;
	}

	val = wm8350_reg_read(wm8350, slot_reg) &
	    ~(WM8350_DC1_ENSLOT_MASK | WM8350_DC1_SDSLOT_MASK |
	      WM8350_DC1_ERRACT_MASK);
	wm8350_reg_write(wm8350, slot_reg,
			 val | (start << WM8350_DC1_ENSLOT_SHIFT) |
			 (stop << WM8350_DC1_SDSLOT_SHIFT) |
			 (fault << WM8350_DC1_ERRACT_SHIFT));

	return 0;
}
开发者ID:19Dan01，项目名称:linux，代码行数:46，代码来源:wm8350-regulator.c

示例12: wm8350_rtc_settime

/*
 * Set current time and date in RTC
 */
static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm)
{
	struct wm8350 *wm8350 = dev_get_drvdata(dev);
	u16 time[4];
	u16 rtc_ctrl;
	int ret, retries = WM8350_SET_TIME_RETRIES;

	time[0] = tm->tm_sec;
	time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT;
	time[1] = tm->tm_hour;
	time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT;
	time[2] = tm->tm_mday;
	time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT;
	time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT;
	time[3] |= (tm->tm_year + 1900) % 100;

	dev_dbg(dev, "Setting: %04x %04x %04x %04x\n",
		time[0], time[1], time[2], time[3]);

	/* Set RTC_SET to stop the clock */
	ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET);
	if (ret < 0)
		return ret;

	/* Wait until confirmation of stopping */
	do {
		rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
		schedule_timeout_uninterruptible(msecs_to_jiffies(1));
	} while (--retries && !(rtc_ctrl & WM8350_RTC_STS));

	if (!retries) {
		dev_err(dev, "timed out on set confirmation\n");
		return -EIO;
	}

	/* Write time to RTC */
	ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time);
	if (ret < 0)
		return ret;

	/* Clear RTC_SET to start the clock */
	ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
				WM8350_RTC_SET);
	return ret;
}
开发者ID:020gzh，项目名称:linux，代码行数:48，代码来源:rtc-wm8350.c

示例13: wm8350_dcdc_set_voltage

static int wm8350_dcdc_set_voltage(struct regulator_dev *rdev, int min_uV,
				   int max_uV, unsigned *selector)
{
	struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
	int volt_reg, dcdc = rdev_get_id(rdev), mV,
		min_mV = min_uV / 1000, max_mV = max_uV / 1000;
	u16 val;

	if (min_mV < 850 || min_mV > 4025)
		return -EINVAL;
	if (max_mV < 850 || max_mV > 4025)
		return -EINVAL;

	/* step size is 25mV */
	mV = (min_mV - 826) / 25;
	if (wm8350_dcdc_val_to_mvolts(mV) > max_mV)
		return -EINVAL;
	BUG_ON(wm8350_dcdc_val_to_mvolts(mV) < min_mV);

	switch (dcdc) {
	case WM8350_DCDC_1:
		volt_reg = WM8350_DCDC1_CONTROL;
		break;
	case WM8350_DCDC_3:
		volt_reg = WM8350_DCDC3_CONTROL;
		break;
	case WM8350_DCDC_4:
		volt_reg = WM8350_DCDC4_CONTROL;
		break;
	case WM8350_DCDC_6:
		volt_reg = WM8350_DCDC6_CONTROL;
		break;
	case WM8350_DCDC_2:
	case WM8350_DCDC_5:
	default:
		return -EINVAL;
	}

	*selector = mV;

	/* all DCDCs have same mV bits */
	val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK;
	wm8350_reg_write(wm8350, volt_reg, val | mV);
	return 0;
}
开发者ID:andi34，项目名称:Dhollmen_Kernel，代码行数:45，代码来源:wm8350-regulator.c

示例14: wm8350_rtc_suspend

static int wm8350_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
	struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev);
	int ret = 0;
	u16 reg;

	reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);

	if (device_may_wakeup(&wm8350->rtc.pdev->dev) &&
	    reg & WM8350_RTC_ALMSTS) {
		ret = wm8350_rtc_stop_alarm(wm8350);
		if (ret != 0)
			dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n",
				ret);
	}

	return ret;
}
开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:18，代码来源:rtc-wm8350.c

示例15: wm8350_wdt_stop

static int wm8350_wdt_stop(struct watchdog_device *wdt_dev)
{
	struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev);
	int ret;
	u16 reg;

	mutex_lock(&wdt_mutex);
	wm8350_reg_unlock(wm8350);

	reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
	reg &= ~WM8350_WDOG_MODE_MASK;
	ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);

	wm8350_reg_lock(wm8350);
	mutex_unlock(&wdt_mutex);

	return ret;
}
开发者ID:19Dan01，项目名称:linux，代码行数:18，代码来源:wm8350_wdt.c


注：本文中的wm8350_reg_read函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。