当前位置: 首页>>代码示例>>C++>>正文

C++ socinfo_get_platform_subtype函数代码示例

本文整理汇总了C++中socinfo_get_platform_subtype函数的典型用法代码示例。如果您正苦于以下问题：C++ socinfo_get_platform_subtype函数的具体用法？C++ socinfo_get_platform_subtype怎么用？C++ socinfo_get_platform_subtype使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了socinfo_get_platform_subtype函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: msm8960_init_cam

void __init msm8960_init_cam(void)
{
	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE) {
		msm_8960_front_cam_gpio_conf.cam_gpiomux_conf_tbl =
			msm8960_cam_2d_configs_sglte;
		msm_8960_front_cam_gpio_conf.cam_gpiomux_conf_tbl_size =
			ARRAY_SIZE(msm8960_cam_2d_configs_sglte);
		msm_8960_back_cam_gpio_conf.cam_gpiomux_conf_tbl =
			msm8960_cam_2d_configs_sglte;
		msm_8960_back_cam_gpio_conf.cam_gpiomux_conf_tbl_size =
			ARRAY_SIZE(msm8960_cam_2d_configs_sglte);
	}
	msm_gpiomux_install(msm8960_cam_common_configs,
			ARRAY_SIZE(msm8960_cam_common_configs));

	if (machine_is_msm8960_cdp()) {
		msm_gpiomux_install(msm8960_cdp_flash_configs,
			ARRAY_SIZE(msm8960_cdp_flash_configs));
#ifdef CONFIG_MSM_CAMERA_FLASH
		msm_flash_src._fsrc.ext_driver_src.led_en =
			GPIO_CAM_GP_LED_EN1;
		msm_flash_src._fsrc.ext_driver_src.led_flash_en =
			GPIO_CAM_GP_LED_EN2;
		#if defined(CONFIG_I2C) && (defined(CONFIG_GPIO_SX150X) || \
		defined(CONFIG_GPIO_SX150X_MODULE))
		msm_flash_src._fsrc.ext_driver_src.expander_info =
			cam_expander_info;
		#endif
#endif
	}

	if (machine_is_msm8960_liquid()) {
		struct msm_camera_sensor_info *s_info;
		s_info = &msm_camera_sensor_imx074_data;
		s_info->sensor_platform_info->mount_angle = 180;
		s_info = &msm_camera_sensor_ov2720_data;
		s_info->sensor_platform_info->ext_power_ctrl =
			msm_camera_8960_ext_power_ctrl;
	}

	if (machine_is_msm8960_fluid()) {
		msm_camera_sensor_imx091_data.sensor_platform_info->
			mount_angle = 270;
	}

	platform_device_register(&msm_camera_server);
	platform_device_register(&msm8960_device_csiphy0);
	platform_device_register(&msm8960_device_csiphy1);
	platform_device_register(&msm8960_device_csiphy2);
	platform_device_register(&msm8960_device_csid0);
	platform_device_register(&msm8960_device_csid1);
	platform_device_register(&msm8960_device_csid2);
	platform_device_register(&msm8960_device_ispif);
	platform_device_register(&msm8960_device_vfe);
	platform_device_register(&msm8960_device_vpe);
}
开发者ID:PyYoshi，项目名称:android_kernel_kyocera_l02，代码行数:56，代码来源:board-8960-camera.c

示例2: msm_htc_8974_init_gpiomux

void __init msm_htc_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

    	
    	if (of_machine_pid() == MEC_DWGL_PID || of_machine_pid() == MEC_TL_PID || of_machine_pid() == MEC_DUGL_PID)
        	msm_gpiomux_install(msm_sensor_configs_china_sku, ARRAY_SIZE(msm_sensor_configs_china_sku));
    	else
        	msm_gpiomux_install(msm_sensor_configs_non_china_sku, ARRAY_SIZE(msm_sensor_configs_non_china_sku));

	msm_gpiomux_install(&nfc_irq_config, 1);

	msm_gpiomux_install(&sd_card_det, 1);

	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_aud_configs,
				 ARRAY_SIZE(msm_aud_configs));

	msm_gpiomux_install(msm_cir_configs, ARRAY_SIZE(msm_cir_configs));

	if (of_machine_pid() == 268)
		msm_gpiomux_install(msm_felica_configs, ARRAY_SIZE(msm_felica_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	msm_gpiomux_install(msm_blsp_rawchip_spi_configs, ARRAY_SIZE(msm_blsp_rawchip_spi_configs));

}
开发者ID:Soultwister，项目名称:kernel_kk444_sense_m8ace，代码行数:55，代码来源:board-mec-gpiomux.c

示例3: glu_init_gpiomux

void __init glu_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_info("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
	socinfo_get_version());

	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0x5);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));

	msm_gpiomux_install(msm_blsp_rawchip_spi_configs, ARRAY_SIZE(msm_blsp_rawchip_spi_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&nfc_irq_config, 1);

	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();
	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	msm_gpiomux_install(msm_mhl_configs, ARRAY_SIZE(msm_mhl_configs));

	msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
			ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

	msm_gpiomux_install_nowrite(msm_display_configs, ARRAY_SIZE(msm_display_configs));
	msm_gpiomux_install(msm_aud_configs, ARRAY_SIZE(msm_aud_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));
}
开发者ID:Arc-Team，项目名称:android_kernel_htc_a11，代码行数:54，代码来源:board-glu-gpiomux.c

示例4: msm_htc_8974_init_gpiomux

void __init msm_htc_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&nfc_irq_config, 1);

	msm_gpiomux_install(&sd_card_det, 1);

	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	msm_gpiomux_install(msm_mhl_configs, ARRAY_SIZE(msm_mhl_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_aud_configs,
				 ARRAY_SIZE(msm_aud_configs));

	msm_gpiomux_install(msm_cir_configs, ARRAY_SIZE(msm_cir_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

}
开发者ID:boa19861105，项目名称:B2_UHL，代码行数:49，代码来源:board-b2-gpiomux.c

示例5: msm8930_init_cam

void __init msm8930_init_cam(void)
{
	msm_gpiomux_install(msm8930_cam_common_configs,
			ARRAY_SIZE(msm8930_cam_common_configs));

#ifndef CONFIG_FIH_CAMERA  
	if (machine_is_msm8930_evt() &&
			(socinfo_get_platform_subtype() ==
			 PLATFORM_SUBTYPE_SGLTE)) {
		msm_gpiomux_install(msm8930_evt_cam_configs,
				ARRAY_SIZE(msm8930_evt_cam_configs));

		/* Load ov8825 & ov9724 only for SGLTE device */
		msm8930_camera_board_info.board_info =
			msm8930_evt_camera_i2c_boardinfo;
		msm8930_camera_board_info.num_i2c_board_info =
			ARRAY_SIZE(msm8930_evt_camera_i2c_boardinfo);
	}
#endif     

	if (machine_is_msm8930_cdp()) {      
#ifndef CONFIG_FIH_CAMERA          
		struct msm_camera_sensor_info *s_info;
		s_info = &msm_camera_sensor_s5k3l1yx_data;
		s_info->sensor_platform_info->mount_angle = 0;
#endif        
#if defined(CONFIG_I2C) && (defined(CONFIG_GPIO_SX150X) || \
	defined(CONFIG_GPIO_SX150X_MODULE))
		msm_flash_src._fsrc.ext_driver_src.led_en =
			GPIO_CAM_GP_LED_EN1;
		msm_flash_src._fsrc.ext_driver_src.led_flash_en =
			GPIO_CAM_GP_LED_EN2;

		msm_flash_src._fsrc.ext_driver_src.expander_info =
			cam_expander_info;
#endif
	}

	platform_device_register(&msm_camera_server);
	platform_device_register(&msm8960_device_csiphy0);
	platform_device_register(&msm8960_device_csiphy1);
	platform_device_register(&msm8960_device_csid0);
	platform_device_register(&msm8960_device_csid1);
	platform_device_register(&msm8960_device_ispif);
	platform_device_register(&msm8960_device_vfe);
	platform_device_register(&msm8960_device_vpe);
}
开发者ID:1n，项目名称:xperia-m-source，代码行数:47，代码来源:board-8930-camera.c

示例6: msm8960_ext_spk_power_amp_off

static void msm8960_ext_spk_power_amp_off(u32 spk)
{
	int ret = 0;
	if (spk & (SPK_AMP_POS | SPK_AMP_NEG)) {
		if (!msm8930_ext_spk_pamp)
			return;

		if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) {
			gpio_free(LEFT_SPKR_AMPL_GPIO);
			msm8930_ext_spk_pamp = 0;
			return;
		}

		if (machine_is_msm8930_mtp()
			|| machine_is_msm8930_fluid()) {
			pr_debug("%s: Free speaker boost gpio %u\n",
					__func__, SPKR_BOOST_GPIO);
			gpio_direction_output(SPKR_BOOST_GPIO, 0);
			gpio_free(SPKR_BOOST_GPIO);
		} else if (socinfo_get_platform_subtype() ==
				PLATFORM_SUBTYPE_SGLTE) {
			ret = pm8xxx_gpio_config(spkr_boost_enable_gpio,
						&SPKR_OFF);
			if (ret) {
				pr_err("%s: Failure: spkr boost gpio OFF %u\n",
				  __func__, spkr_boost_enable_gpio);
				return;
			} else {
				pr_debug("%s:Config PMIC8038 gpio for speaker" \
				" OFF successfully\n", __func__);
			}
		}

		pm8xxx_spk_enable(MSM8930_SPK_OFF);
		msm8930_ext_spk_pamp = 0;
		pr_debug("%s: slepping 4 ms after turning on external "
			" Left Speaker Ampl\n", __func__);
		usleep_range(4000, 4000);

	} else  {

		pr_err("%s: ERROR : Invalid External Speaker Ampl. spk = 0x%08x\n",
			__func__, spk);
		return;
	}
}
开发者ID:rspousta，项目名称:sony_xperia_m，代码行数:46，代码来源:msm8930.c

示例7: msm8930_audio_init

static int __init msm8930_audio_init(void)
{
	int ret;

	if (!soc_class_is_msm8930()) {
		pr_err("%s: Not the right machine type\n", __func__);
		return -ENODEV ;
	}
	mbhc_cfg.calibration = def_sitar_mbhc_cal();
	if (!mbhc_cfg.calibration) {
		pr_err("Calibration data allocation failed\n");
		return -ENOMEM;
	}

	msm8930_snd_device = platform_device_alloc("soc-audio", 0);
	if (!msm8930_snd_device) {
		pr_err("Platform device allocation failed\n");
		kfree(mbhc_cfg.calibration);
		return -ENOMEM;
	}

	platform_set_drvdata(msm8930_snd_device, &snd_soc_card_msm8930);
	ret = platform_device_add(msm8930_snd_device);
	if (ret) {
		platform_device_put(msm8930_snd_device);
		kfree(mbhc_cfg.calibration);
		return ret;
	}

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
		us_euro_gpio = GPIO_HS_US_EURO_SEL_GPIO_SGLTE;
	else
		us_euro_gpio = GPIO_HS_US_EURO_SEL_GPIO;

	if (msm8930_configure_headset_mic_gpios())
		pr_err("%s Fail to configure headset mic gpios\n", __func__);

	atomic_set(&auxpcm_rsc_ref, 0);
	mutex_init(&cdc_mclk_mutex);
	return ret;

}
开发者ID:rspousta，项目名称:sony_xperia_m，代码行数:42，代码来源:msm8930.c

示例8: msm8960_init_gpiomux

int __init msm8960_init_gpiomux(void)
{
	int rc = msm_gpiomux_init(NR_GPIO_IRQS);
	if (rc) {
		pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
		return rc;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (socinfo_get_platform_subtype() != PLATFORM_SUBTYPE_SGLTE)
		msm_gpiomux_install(msm8960_ethernet_configs,
				ARRAY_SIZE(msm8960_ethernet_configs));
#endif

	msm_gpiomux_install(msm8960_gsbi_configs,
			ARRAY_SIZE(msm8960_gsbi_configs));

	msm_gpiomux_install(msm8960_cyts_configs,
			ARRAY_SIZE(msm8960_cyts_configs));

	msm_gpiomux_install(msm8960_slimbus_config,
			ARRAY_SIZE(msm8960_slimbus_config));

	msm_gpiomux_install(msm8960_audio_codec_configs,
			ARRAY_SIZE(msm8960_audio_codec_configs));

	msm_gpiomux_install(msm8960_audio_auxpcm_configs,
			ARRAY_SIZE(msm8960_audio_auxpcm_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
			ARRAY_SIZE(wcnss_5wire_interface));

#ifdef CONFIG_MMC_MSM_SDC4_SUPPORT
	msm_gpiomux_install(msm8960_sdcc4_configs,
		ARRAY_SIZE(msm8960_sdcc4_configs));
#endif

	if (machine_is_msm8960_mtp() || machine_is_msm8960_fluid() ||
		machine_is_msm8960_liquid() || machine_is_msm8960_cdp()) {
		if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
			msm_gpiomux_install(hap_lvl_shft_config_sglte,
				ARRAY_SIZE(hap_lvl_shft_config_sglte));

		else
			msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));
	}

#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if ((SOCINFO_VERSION_MAJOR(socinfo_get_version()) != 1) &&
		machine_is_msm8960_liquid())
		msm_gpiomux_install(msm8960_hsic_configs,
			ARRAY_SIZE(msm8960_hsic_configs));

	if ((SOCINFO_VERSION_MAJOR(socinfo_get_version()) != 1) &&
			machine_is_msm8960_liquid())
		msm_gpiomux_install(msm8960_hsic_hub_configs,
			ARRAY_SIZE(msm8960_hsic_hub_configs));
#endif

#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
	msm_gpiomux_install(msm8960_hdmi_configs,
			ARRAY_SIZE(msm8960_hdmi_configs));
#endif

	msm_gpiomux_install(msm8960_mdp_vsync_configs,
			ARRAY_SIZE(msm8960_mdp_vsync_configs));

	if (socinfo_get_platform_subtype() != PLATFORM_SUBTYPE_SGLTE)
		msm_gpiomux_install(msm8960_gsbi8_uartdm_configs,
			ARRAY_SIZE(msm8960_gsbi8_uartdm_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
		msm_gpiomux_install(msm8960_gsbi8_uart_configs,
			ARRAY_SIZE(msm8960_gsbi8_uart_configs));
	else
		msm_gpiomux_install(msm8960_gsbi5_uart_configs,
			ARRAY_SIZE(msm8960_gsbi5_uart_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE) {
		/* For 8960 Fusion 2.2 Primary IPC */
		msm_gpiomux_install(msm8960_fusion_gsbi_configs,
			ARRAY_SIZE(msm8960_fusion_gsbi_configs));
		/* For SGLTE 8960 Fusion External VFR */
		msm_gpiomux_install(msm8960_external_vfr_configs,
			ARRAY_SIZE(msm8960_external_vfr_configs));
	}

#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
	msm_gpiomux_install(msm8960_sdcc2_configs,
		ARRAY_SIZE(msm8960_sdcc2_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
		msm_gpiomux_install(sglte_configs,
			ARRAY_SIZE(sglte_configs));

	return 0;
}
开发者ID:Hybridmax，项目名称:I9505_Hybridmax-Stock_Kernel，代码行数:99，代码来源:board-8960-gpiomux.c

示例9: msm_htc_8974_init_gpiomux

void __init msm_htc_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
	msm_gpiomux_install(msm_sensor_configs_non_common, ARRAY_SIZE(msm_sensor_configs_non_common));

    //For china sku, GPIO 132 is for front cam ID, for non-china sku, GPIO 117 is for front cam ID
    if (of_machine_pid() == m8_TL_PID || of_machine_pid() == m8_DUG_PID || of_machine_pid() == m8_DUGL_PID || of_machine_pid() == m8_DWG_PID || of_machine_pid() == m8_DWGL_PID || of_machine_pid() == m8_UHL_PID)
        msm_gpiomux_install(msm_sensor_configs_china_sku, ARRAY_SIZE(msm_sensor_configs_china_sku));
    else
        msm_gpiomux_install(msm_sensor_configs_non_china_sku, ARRAY_SIZE(msm_sensor_configs_non_china_sku));

	msm_gpiomux_install(&nfc_irq_config, 1);

	msm_gpiomux_install(&sd_card_det, 1);

	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	msm_gpiomux_install(msm_mhl_configs, ARRAY_SIZE(msm_mhl_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_aud_configs,
				 ARRAY_SIZE(msm_aud_configs));

	msm_gpiomux_install(msm_aud_spk_china_configs, ARRAY_SIZE(msm_aud_spk_china_configs));

	msm_gpiomux_install(msm_cir_configs, ARRAY_SIZE(msm_cir_configs));

	if (of_machine_pid() == 268 || of_board_is_m8wlj())
		msm_gpiomux_install(msm_felica_configs, ARRAY_SIZE(msm_felica_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	msm_gpiomux_install(msm_blsp_rawchip_spi_configs, ARRAY_SIZE(msm_blsp_rawchip_spi_configs));

}
开发者ID:Bdaman80，项目名称:android_kernel_htc_a3ul，代码行数:63，代码来源:board-m8-gpiomux.c

示例10: apq8064_init_gpiomux

void __init apq8064_init_gpiomux(void)
{
	int rc;
	int platform_version = socinfo_get_platform_version();

	rc = msm_gpiomux_init(NR_GPIO_IRQS);
	if (rc) {
		pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
		return;
	}

#ifdef CONFIG_MMC_MSM_SDC4_SUPPORT
	if (system_rev < BOARD_REV09) {
		msm_gpiomux_install(sdc4_interface,
				ARRAY_SIZE(sdc4_interface));
		msm_gpiomux_install(sd_ls_en_60_config,
				ARRAY_SIZE(sd_ls_en_60_config));
	} else {
		msm_gpiomux_install(sdc2_interface,
				ARRAY_SIZE(sdc2_interface));
		msm_gpiomux_install(sd_ls_en_64_config,
				ARRAY_SIZE(sd_ls_en_64_config));
	}
#else
	msm_gpiomux_install(wcnss_5wire_interface,
			ARRAY_SIZE(wcnss_5wire_interface));
#endif

	if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
		 machine_is_mpq8064_dtv()) {
		msm_gpiomux_install(mpq8064_gsbi5_i2c_configs,
				ARRAY_SIZE(mpq8064_gsbi5_i2c_configs));
#ifdef CONFIG_MSM_VCAP
		msm_gpiomux_install(vcap_configs,
				ARRAY_SIZE(vcap_configs));
#endif
		msm_gpiomux_install(sx150x_int_configs,
				ARRAY_SIZE(sx150x_int_configs));
	} else {
		#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
		msm_gpiomux_install(apq8064_ethernet_configs,
				ARRAY_SIZE(apq8064_ethernet_configs));
		#endif

		msm_gpiomux_install(apq8064_gsbi_configs,
				ARRAY_SIZE(apq8064_gsbi_configs));
	}

	msm_gpiomux_install(apq8064_nc_configs,
			ARRAY_SIZE(apq8064_nc_configs));

	msm_gpiomux_install(sensorhub_configs,
			ARRAY_SIZE(sensorhub_configs));
	if (system_rev > BOARD_REV11)
		msm_gpiomux_install(nfc_firmware_configs,
			ARRAY_SIZE(nfc_firmware_configs));

	msm_gpiomux_install(apq8064_slimbus_config,
			ARRAY_SIZE(apq8064_slimbus_config));

	msm_gpiomux_install(apq8064_audio_codec_configs,
			ARRAY_SIZE(apq8064_audio_codec_configs));

	if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
		machine_is_mpq8064_dtv()) {
		msm_gpiomux_install(mpq8064_spkr_i2s_config,
			ARRAY_SIZE(mpq8064_spkr_i2s_config));
	}

	pr_debug("%s(): audio-auxpcm: Include GPIO configs"
		" as audio is not the primary user"
		" for these GPIO Pins\n", __func__);

	msm_gpiomux_install(apq8064_auxpcm_configs,
		ARRAY_SIZE(apq8064_auxpcm_configs));		

	if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
		machine_is_mpq8064_dtv())
		msm_gpiomux_install(mpq8064_mi2s_configs,
			ARRAY_SIZE(mpq8064_mi2s_configs));

	if (machine_is_apq8064_mtp()|| machine_is_JF()) {
		if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_DSDA2) {
			msm_gpiomux_install(amdm_configs,
					ARRAY_SIZE(amdm_configs));
			msm_gpiomux_install(bmdm_configs,
					ARRAY_SIZE(bmdm_configs));
		} else if (socinfo_get_platform_subtype() ==
				PLATFORM_SUBTYPE_SGLTE2) {
			msm_gpiomux_install(mdm_configs,
					ARRAY_SIZE(mdm_configs));
			msm_gpiomux_install(sglte2_qsc_configs,
					ARRAY_SIZE(sglte2_qsc_configs));

			/* GSBI4 UART GPIOs for Primary IPC */
			msm_gpiomux_install(apq8064_uartdm_gsbi4_configs,
					ARRAY_SIZE(apq8064_uartdm_gsbi4_configs));
		} else if (SOCINFO_VERSION_MINOR(platform_version) == 1) {
			msm_gpiomux_install(mdm_i2s_configs,
					ARRAY_SIZE(mdm_i2s_configs));
//.........这里部分代码省略.........
开发者ID:Hybridmax，项目名称:I9505_Hybridmax-Stock_Kernel，代码行数:101，代码来源:board-jf_vzw-gpiomux.c

示例11: msm_8974_init_gpiomux

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
		socinfo_get_version());
	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if 0 //defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
	msm_gpiomux_btuart_install();
#endif

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
#if !defined(CONFIG_SENSORS_SSP)
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));
#endif

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));


	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();

	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	msm_gpiomux_install(fuel_i2c_config, ARRAY_SIZE(fuel_i2c_config));
#if !defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#if defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(ssp_configs,
				ARRAY_SIZE(ssp_configs));
#endif

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#if defined(CONFIG_BCM2079X_NFC_I2C) || defined(CONFIG_NFC_PN547)
	msm_gpiomux_install(msm_nfc_configs,
	ARRAY_SIZE(msm_nfc_configs));
#endif
	msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
	msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) */

#if defined(CONFIG_LEDS_AN30259A)
	if (system_rev < 7) {
		msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
	}
	else
	{
		msm_gpiomux_install(an30259a_led_config_rev7,
				ARRAY_SIZE(an30259a_led_config_rev7));
	}
#endif

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

#ifdef CONFIG_SENSORS_HALL
//.........这里部分代码省略.........
开发者ID:adis1313，项目名称:android_kernel_samsung_msm8974，代码行数:101，代码来源:board-8974-sec-ks01-gpiomux.c

示例12: apq8064_init_gpiomux

void __init apq8064_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init(NR_GPIO_IRQS);
	if (rc) {
		pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
		return;
	}
#ifdef CONFIG_SWITCH_MAX1462X
	msm_gpiomux_install(apq8064_earjack_configs,
			ARRAY_SIZE(apq8064_earjack_configs));
#endif
#ifndef CONFIG_MMC_MSM_SDC4_SUPPORT
	msm_gpiomux_install(wcnss_5wire_interface,
			ARRAY_SIZE(wcnss_5wire_interface));
#endif
	if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
		 machine_is_mpq8064_dtv()) {
#ifdef CONFIG_MSM_VCAP
		msm_gpiomux_install(vcap_configs,
				ARRAY_SIZE(vcap_configs));
#endif
		msm_gpiomux_install(sx150x_int_configs,
				ARRAY_SIZE(sx150x_int_configs));
	} else {
		#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
		msm_gpiomux_install(apq8064_ethernet_configs,
				ARRAY_SIZE(apq8064_ethernet_configs));
		#endif

		msm_gpiomux_install(apq8064_gsbi_configs,
				ARRAY_SIZE(apq8064_gsbi_configs));
	}

	msm_gpiomux_install(apq8064_slimbus_config,
			ARRAY_SIZE(apq8064_slimbus_config));

#if defined(CONFIG_ANDROID_IRRC)
	msm_gpiomux_install(apq8064_irrc_tx_configs,
			ARRAY_SIZE(apq8064_irrc_tx_configs));
#endif

#ifdef CONFIG_SND_SOC_TPA2028D_DUAL_SPEAKER
	msm_gpiomux_install(apq8064_gsbi7_i2c_8ma_configs,
					ARRAY_SIZE(apq8064_gsbi7_i2c_8ma_configs));
#endif

	msm_gpiomux_install(apq8064_audio_codec_configs,
			ARRAY_SIZE(apq8064_audio_codec_configs));

	if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
		machine_is_mpq8064_dtv()) {
		msm_gpiomux_install(mpq8064_spkr_i2s_config,
			ARRAY_SIZE(mpq8064_spkr_i2s_config));
	}

	pr_debug("%s(): audio-auxpcm: Include GPIO configs"
		" as audio is not the primary user"
		" for these GPIO Pins\n", __func__);

#if defined(CONFIG_MODEM_SUPPORT)
	if (machine_is_apq8064_mtp()) {
		if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_DSDA2) {
			msm_gpiomux_install(amdm_configs,
					ARRAY_SIZE(amdm_configs));
			msm_gpiomux_install(bmdm_configs,
				ARRAY_SIZE(bmdm_configs));
		} else if (SOCINFO_VERSION_MINOR(platform_version) == 1)
			msm_gpiomux_install(mdm_i2s_configs,
					ARRAY_SIZE(mdm_i2s_configs));
		else
			msm_gpiomux_install(mdm_configs,
					ARRAY_SIZE(mdm_configs));
	}
#endif

#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_apq8064_mtp()) {
		if (SOCINFO_VERSION_MINOR(platform_version) == 1) {
			msm_gpiomux_install(cyts_gpio_alt_config,
					ARRAY_SIZE(cyts_gpio_alt_config));
		} else {
			msm_gpiomux_install(cyts_gpio_configs,
					ARRAY_SIZE(cyts_gpio_configs));
		}
	}

	if (machine_is_apq8064_mtp())
		msm_gpiomux_install(apq8064_hsic_configs,
				ARRAY_SIZE(apq8064_hsic_configs));
#endif

	if (machine_is_apq8064_cdp() || machine_is_apq8064_liquid())
		msm_gpiomux_install(apq8064_mxt_configs,
			ARRAY_SIZE(apq8064_mxt_configs));

	msm_gpiomux_install(apq8064_hdmi_configs,
			ARRAY_SIZE(apq8064_hdmi_configs));
#if defined (CONFIG_SLIMPORT_ANX7808)
//.........这里部分代码省略.........
开发者ID:jonacx，项目名称:cyanogenmod12，代码行数:101，代码来源:board-palman-gpiomux.c

示例13: msm_8974_init_gpiomux


//.........这里部分代码省略.........
#endif

#if defined(CONFIG_MACH_KS01SKT) || defined(CONFIG_MACH_KS01KTT)\
	|| defined(CONFIG_MACH_KS01LGT)	&& defined(CONFIG_BT_BCM4335)
	msm_gpiomux_btuart_install();
#endif

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
#if !defined(CONFIG_SENSORS_SSP)
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));
#endif

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

#ifdef CONFIG_MACH_KS01
	msm_gpiomux_install(&sd_card_det, 1);

	if(system_rev < 3)
		msm_gpiomux_install(wcnss_5wire_interface,
					ARRAY_SIZE(wcnss_5wire_interface));
	else
		msm_gpiomux_sdc3_install();
#else
	msm_gpiomux_sdc3_install();
#endif

	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

#if !defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#if defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(ssp_configs,
				ARRAY_SIZE(ssp_configs));
#endif

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#if defined(CONFIG_BCM2079X_NFC_I2C)
	msm_gpiomux_install(msm_nfc_configs,
	ARRAY_SIZE(msm_nfc_configs));
#endif

#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE)
	msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) */

#if defined(CONFIG_LEDS_AN30259A)
#if defined(CONFIG_MACH_KS01SKT) || defined(CONFIG_MACH_KS01KTT)\
		|| defined(CONFIG_MACH_KS01LGT)

	if (system_rev < 7) {
		msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
	}
	else
	{
		msm_gpiomux_install(an30259a_led_config_rev7,
				ARRAY_SIZE(an30259a_led_config_rev7));
	}
#else
	msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
#endif
#endif

	msm_gpiomux_install(msm8974_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_auxpcm_configs));

	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

#ifdef CONFIG_SENSORS_HALL
	msm_gpiomux_install(msm8974_hall_configs, ARRAY_SIZE(msm8974_hall_configs));
#endif

#ifdef CONFIG_KEYBOARD_CYPRESS_TOUCH
	msm_gpiomux_install(cypress_touch_configs, ARRAY_SIZE(cypress_touch_configs));
#endif

	msm_gpiomux_install(fpga_tflash, ARRAY_SIZE(fpga_tflash));

	msm_gpiomux_install(nc_configs,
			ARRAY_SIZE(nc_configs));
}
开发者ID:Hypercore，项目名称:leanKernel-note3，代码行数:101，代码来源:board-8974-sec-j-gpiomux.c

示例14: msm8930_audrx_init

static int msm8930_audrx_init(struct snd_soc_pcm_runtime *rtd)
{
	int err, ret;
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dapm_context *dapm = &codec->dapm;
	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;

	pr_debug("%s()\n", __func__);

	snd_soc_dapm_new_controls(dapm, msm8930_dapm_widgets,
				ARRAY_SIZE(msm8930_dapm_widgets));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
		snd_soc_dapm_add_routes(dapm, common_audio_map_sglte,
			ARRAY_SIZE(common_audio_map_sglte));
	else
		snd_soc_dapm_add_routes(dapm, common_audio_map,
			ARRAY_SIZE(common_audio_map));

	snd_soc_dapm_enable_pin(dapm, "Ext Spk Left Pos");
	snd_soc_dapm_enable_pin(dapm, "Ext Spk Left Neg");

	snd_soc_dapm_sync(dapm);

	err = snd_soc_jack_new(codec, "Headset Jack",
		MSM8930_JACK_TYPES,
		&hs_jack);
	if (err) {
		pr_err("failed to create new jack\n");
		return err;
	}

	err = snd_soc_jack_new(codec, "Button Jack",
				SITAR_JACK_BUTTON_MASK, &button_jack);
	if (err) {
		pr_err("failed to create new jack\n");
		return err;
	}

	ret = snd_jack_set_key(button_jack.jack,
			       SND_JACK_BTN_0,
			       KEY_MEDIA);
	if (ret) {
		pr_err("%s: Failed to set code for btn-0\n", __func__);
		return err;
	}

	codec_clk = clk_get(cpu_dai->dev, "osr_clk");

	/*
	 * Switch is present only in 8930 CDP and SGLTE
	 */
	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE ||
		machine_is_msm8930_cdp())
		mbhc_cfg.swap_gnd_mic = msm8930_swap_gnd_mic;

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE) {
		mbhc_cfg.gpio = GPIO_HS_DET_SGLTE;
		mbhc_cfg.gpio_level_insert = 0;
	} else
		mbhc_cfg.gpio = GPIO_HS_DET;

	/*
	 * GPIO for headset detect is present in all devices
	 * MTP/Fluid/CDP/SGLTE
	 */
	err = gpio_request(mbhc_cfg.gpio, "HEADSET_DETECT");
	if (err) {
		pr_err("%s: Failed to request gpio %d\n",
				__func__, mbhc_cfg.gpio);
		return err;
	}

	mbhc_cfg.gpio_irq = gpio_to_irq(mbhc_cfg.gpio);
	sitar_hs_detect(codec, &mbhc_cfg);

	if (socinfo_get_pmic_model() != PMIC_MODEL_PM8917) {
		/* Initialize default PMIC speaker gain */
		pm8xxx_spk_gain(DEFAULT_PMIC_SPK_GAIN);
	}

	return 0;
}
开发者ID:rspousta，项目名称:sony_xperia_m，代码行数:83，代码来源:msm8930.c

示例15: smd_tty_init

static int __init smd_tty_init(void)
{
	int ret;
	int n;
	int idx;

	smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS);
	if (smd_tty_driver == 0)
		return -ENOMEM;

	smd_tty_driver->owner = THIS_MODULE;
	smd_tty_driver->driver_name = "smd_tty_driver";
	smd_tty_driver->name = "smd";
	smd_tty_driver->major = 0;
	smd_tty_driver->minor_start = 0;
	smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
	smd_tty_driver->subtype = SERIAL_TYPE_NORMAL;
	smd_tty_driver->init_termios = tty_std_termios;
	smd_tty_driver->init_termios.c_iflag = 0;
	smd_tty_driver->init_termios.c_oflag = 0;
	smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
	smd_tty_driver->init_termios.c_lflag = 0;
	smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS |
		TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
	tty_set_operations(smd_tty_driver, &smd_tty_ops);

	ret = tty_register_driver(smd_tty_driver);
	if (ret) {
		put_tty_driver(smd_tty_driver);
		pr_err("%s: driver registration failed %d\n", __func__, ret);
		return ret;
	}

	for (n = 0; n < ARRAY_SIZE(smd_configs); ++n) {
		idx = smd_configs[n].tty_dev_index;

		if (smd_configs[n].dev_name == NULL)
			smd_configs[n].dev_name = smd_configs[n].port_name;

		if (idx == DS_IDX) {
			/*
			 * DS port uses the kernel API starting with
			 * 8660 Fusion.  Only register the userspace
			 * platform device for older targets.
			 */
			int legacy_ds = 0;

			legacy_ds |= cpu_is_msm7x01() || cpu_is_msm7x25();
			legacy_ds |= cpu_is_msm7x27() || cpu_is_msm7x30();
			legacy_ds |= cpu_is_qsd8x50() || cpu_is_msm8x55();
			/*
			 * use legacy mode for 8660 Standalone (subtype 0)
			 */
			legacy_ds |= cpu_is_msm8x60() &&
					(socinfo_get_platform_subtype() == 0x0);

			if (!legacy_ds)
				continue;
		}

		tty_register_device(smd_tty_driver, idx, 0);
		init_completion(&smd_tty[idx].ch_allocated);

		/* register platform device */
		smd_tty[idx].driver.probe = smd_tty_dummy_probe;
		smd_tty[idx].driver.driver.name = smd_configs[n].dev_name;
		smd_tty[idx].driver.driver.owner = THIS_MODULE;
		spin_lock_init(&smd_tty[idx].reset_lock);
		smd_tty[idx].is_open = 0;
		init_waitqueue_head(&smd_tty[idx].ch_opened_wait_queue);
		ret = platform_driver_register(&smd_tty[idx].driver);

		if (ret) {
			pr_err("%s: init failed %d (%d)\n", __func__, idx, ret);
			smd_tty[idx].driver.probe = NULL;
			goto out;
		}
		smd_tty[idx].smd = &smd_configs[n];
	}
	INIT_DELAYED_WORK(&loopback_work, loopback_probe_worker);
	return 0;

out:
	/* unregister platform devices */
	for (n = 0; n < ARRAY_SIZE(smd_configs); ++n) {
		idx = smd_configs[n].tty_dev_index;

		if (smd_tty[idx].driver.probe) {
			platform_driver_unregister(&smd_tty[idx].driver);
			tty_unregister_device(smd_tty_driver, idx);
		}
	}

	tty_unregister_driver(smd_tty_driver);
	put_tty_driver(smd_tty_driver);
	return ret;
}
开发者ID:NooNameR，项目名称:QSD3.0，代码行数:97，代码来源:smd_tty.c


注：本文中的socinfo_get_platform_subtype函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。