本文整理汇总了C++中show_invalid_param_message函数的典型用法代码示例。如果您正苦于以下问题：C++ show_invalid_param_message函数的具体用法？C++ show_invalid_param_message怎么用？C++ show_invalid_param_message使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了show_invalid_param_message函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: set_tx_rf_bandwidth
/**************************************************************************//***
* @brief Sets the TX RF bandwidth [Hz].
*
* @return None.
*******************************************************************************/
void set_tx_rf_bandwidth(double* param, char param_no) // "tx_rf_bandwidth=" command
{
uint32_t bandwidth_hz;
if(param_no >= 1)
{
bandwidth_hz = param[0];
ad9361_set_tx_rf_bandwidth(ad9361_phy, bandwidth_hz);
}
else
show_invalid_param_message(1);
}示例2: set_rx_fir_en
/**************************************************************************//***
* @brief Sets the RX FIR state.
*
* @return None.
*******************************************************************************/
void set_rx_fir_en(double* param, char param_no) // "rx_fir_en=" command
{
uint8_t en_dis;
if(param_no >= 1)
{
en_dis = param[0];
ad9361_set_rx_fir_en_dis(ad9361_phy, en_dis);
console_print("rx_fir_en=%d\n", en_dis);
}
else
show_invalid_param_message(1);
}示例3: set_rx2_rf_gain
/**************************************************************************//***
* @brief Sets the RX2 RF gain.
*
* @return None.
*******************************************************************************/
void set_rx2_rf_gain(double* param, char param_no) // "rx2_rf_gain=" command
{
int32_t gain_db;
if(param_no >= 1)
{
gain_db = param[0];
ad9361_set_rx_rf_gain (ad9361_phy, 1, gain_db);
console_print("rx2_rf_gain=%d\n", gain_db);
}
else
show_invalid_param_message(1);
}示例4: set_rx2_gc_mode
/**************************************************************************//***
* @brief Sets the RX2 GC mode.
*
* @return None.
*******************************************************************************/
void set_rx2_gc_mode(double* param, char param_no) // "rx2_gc_mode=" command
{
uint8_t gc_mode;
if(param_no >= 1)
{
gc_mode = param[0];
ad9361_set_rx_gain_control_mode(ad9361_phy, 1, gc_mode);
console_print("rx2_gc_mode=%d\n", gc_mode);
}
else
show_invalid_param_message(1);
}示例5: set_dds_tx2_tone2_scale
/**************************************************************************//***
* @brief Sets the DDS TX2 Tone 2 scale.
*
* @return None.
*******************************************************************************/
void set_dds_tx2_tone2_scale(double* param, char param_no) // dds_tx2_tone2_scale=
{
uint32_t scale = (uint32_t)param[0];
if(param_no >= 1)
{
dds_set_scale(DDS_CHAN_TX2_I_F2, scale);
dds_set_scale(DDS_CHAN_TX2_Q_F2, scale);
console_print("dds_tx2_tone2_scale=%d\n", scale);
}
else
show_invalid_param_message(1);
}示例6: set_tx2_attenuation
/**************************************************************************//***
* @brief Sets the TX2 attenuation [mdB].
*
* @return None.
*******************************************************************************/
void set_tx2_attenuation(double* param, char param_no) // "tx1_attenuation=" command
{
uint32_t attenuation_mdb;
if(param_no >= 1)
{
attenuation_mdb = param[0];
ad9361_set_tx_attenuation(ad9361_phy, 1, attenuation_mdb);
console_print("tx2_attenuation=%d\n", attenuation_mdb);
}
else
show_invalid_param_message(1);
}示例7: set_dds_tx2_tone2_freq
/**************************************************************************//***
* @brief Sets the DDS TX2 Tone 2 frequency [Hz].
*
* @return None.
*******************************************************************************/
void set_dds_tx2_tone2_freq(double* param, char param_no) // dds_tx2_tone2_freq=
{
uint32_t freq = (uint32_t)param[0];
if(param_no >= 1)
{
dds_set_frequency(DDS_CHAN_TX2_I_F2, freq);
dds_set_frequency(DDS_CHAN_TX2_Q_F2, freq);
console_print("dds_tx2_tone2_freq=%d\n", freq);
}
else
show_invalid_param_message(1);
}示例8: get_register
/**************************************************************************//***
* @brief Displays all available commands.
*
* @return None.
*******************************************************************************/
void get_register(double* param, char param_no) // "register?" command
{
uint16_t reg_addr;
uint8_t reg_val;
if(param_no >= 1)
{
reg_addr = param[0];
reg_val = ad9361_spi_read(NULL, reg_addr);
console_print("register[0x%x]=0x%x\n", reg_addr, reg_val);
}
else
show_invalid_param_message(1);
}示例9: set_dds_tx2_tone2_scale
/**************************************************************************//***
* @brief Sets the DDS TX2 Tone 2 scale.
*
* @return None.
*******************************************************************************/
void set_dds_tx2_tone2_scale(double* param, char param_no) // dds_tx2_tone2_scale=
{
double scale = param[0];
if(param_no >= 1)
{
dds_set_scale(DDS_CHAN_TX2_I_F2, scale);
dds_set_scale(DDS_CHAN_TX2_Q_F2, scale);
scale = dds_st.cached_scale[DDS_CHAN_TX2_I_F2];
console_print("dds_tx2_tone2_scale=%f\n", scale);
}
else
show_invalid_param_message(1);
}示例10: set_dds_tx2_tone1_scale
/**************************************************************************//***
* @brief Sets the DDS TX2 Tone 1 scale.
*
* @return None.
*******************************************************************************/
void set_dds_tx2_tone1_scale(double* param, char param_no) // dds_tx2_tone1_scale=
{
int32_t scale = (int32_t)param[0];
if(param_no >= 1)
{
dds_set_scale(ad9361_phy, DDS_CHAN_TX2_I_F1, scale);
dds_set_scale(ad9361_phy, DDS_CHAN_TX2_Q_F1, scale);
scale = dds_st.cached_scale[DDS_CHAN_TX2_I_F1];
console_print("dds_tx2_tone1_scale=%d\n", scale);
}
else
show_invalid_param_message(1);
}示例11: set_rx_samp_freq
/**************************************************************************//***
* @brief Sets the RX sampling frequency [Hz].
*
* @return None.
*******************************************************************************/
void set_rx_samp_freq(double* param, char param_no) // "rx_samp_freq=" command
{
uint32_t sampling_freq_hz;
if(param_no >= 1)
{
sampling_freq_hz = (uint32_t)param[0];
ad9361_set_rx_sampling_freq(ad9361_phy, sampling_freq_hz);
ad9361_get_rx_sampling_freq(ad9361_phy, &sampling_freq_hz);
dds_update();
console_print("rx_samp_freq=%d\n", sampling_freq_hz);
}
else
show_invalid_param_message(1);
}示例12: set_dds_tx2_tone2_phase
/**************************************************************************//***
* @brief Sets the DDS TX2 Tone 2 phase [degrees].
*
* @return None.
*******************************************************************************/
void set_dds_tx2_tone2_phase(double* param, char param_no) // dds_tx2_tone2_phase=
{
int32_t phase = (uint32_t)param[0];
if(param_no >= 1)
{
dds_set_phase(DDS_CHAN_TX2_I_F2, (uint32_t)(phase * 1000));
if ((phase - 90) < 0)
phase += 360;
dds_set_phase(DDS_CHAN_TX2_Q_F2, (uint32_t)((phase - 90) * 1000));
phase = dds_st.cached_phase[DDS_CHAN_TX2_I_F2] / 1000;
console_print("dds_tx2_tone2_phase=%d\n", phase);
}
else
show_invalid_param_message(1);
}示例13: set_dds_tx1_tone1_scale
/**************************************************************************//***
* @brief Sets the DDS TX1 Tone 1 scale.
*
* @return None.
*******************************************************************************/
void set_dds_tx1_tone1_scale(double* param, char param_no) // dds_tx1_tone1_scale=
{
int32_t scale = (int32_t)param[0];
if (ad9361_phy==0) {
console_print ("Error: no AD9361 device selected\n");
return;
}
if(param_no >= 1)
{
dds_set_scale(DDS_CHAN_TX1_I_F1, scale, ad9361_phy);
dds_set_scale(DDS_CHAN_TX1_Q_F1, scale, ad9361_phy);
scale = ad9361_phy->dds_st.cached_scale[DDS_CHAN_TX1_I_F1];
console_print("dds_tx1_tone1_scale=%d\n", scale);
}
else
show_invalid_param_message(1);
}示例14: set_tx_rf_bandwidth
/**************************************************************************//***
* @brief Sets the TX RF bandwidth [Hz].
*
* @return None.
*******************************************************************************/
void set_tx_rf_bandwidth(double* param, char param_no) // "tx_rf_bandwidth=" command
{
uint32_t bandwidth_hz;
if (ad9361_phy==0) {
console_print ("Error: no AD9361 device selected\n");
return;
}
if(param_no >= 1)
{
bandwidth_hz = param[0];
ad9361_set_tx_rf_bandwidth(ad9361_phy, bandwidth_hz);
}
else
show_invalid_param_message(1);
}示例15: set_ad_num
void set_ad_num (double* param, char param_no)
{
uint32_t adi_num = (uint32_t)param[0];
if(param_no >= 1)
{
switch (adi_num) {
case 0: ad9361_phy = ad9361_phy_0; break;
case 1: ad9361_phy = ad9361_phy_1; break;
default: ad9361_phy = ad9361_phy_0; break;
}
// set_spi_ss(ad9361_phy->pcore_id);
console_print ("ad_num=%d\n", ad9361_phy->pcore_id);
}
else
show_invalid_param_message(1);
};