当前位置: 首页>>代码示例>>C++>>正文

C++ set_touchkey_debug函数代码示例

本文整理汇总了C++中set_touchkey_debug函数的典型用法代码示例。如果您正苦于以下问题：C++ set_touchkey_debug函数的具体用法？C++ set_touchkey_debug怎么用？C++ set_touchkey_debug使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了set_touchkey_debug函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: sec_touchkey_early_suspend

static int sec_touchkey_early_suspend(struct early_suspend *h)
{
	struct touchkey_i2c *tkey_i2c =
		container_of(h, struct touchkey_i2c, early_suspend);
	int ret;
	int i;


#if defined(CONFIG_S2VE_TOUCHKEY_REV05)

	set_touchkey_debug('S');
	printk(KERN_DEBUG "[TouchKey] sec_touchkey_early_suspend\n");
	touchkey_suspended = 1;	
	printk(KERN_ERR"sec_touchkey_early_suspend++\n");
	touchkey_led_on(tkey_i2c, 0);
	disable_irq(tkey_i2c->irq);
	
	gpio_set_value(TOUCHKEY_SDA, 1); 
	gpio_set_value(TOUCHKEY_SCL, 1); 
	Touchkey_PowerOnOff(0);

	msleep(10);
	enable_irq(tkey_i2c->irq);

#else	

	gpio_set_value(TOUCHKEY_SDA, 1); 
	gpio_set_value(TOUCHKEY_SCL, 1); 	

	disable_irq(tkey_i2c->irq);
	ret = cancel_work_sync(&tkey_i2c->update_work);
	if (ret) {
		printk(KERN_DEBUG "[Touchkey] enable_irq ret=%d\n", ret);
		enable_irq(tkey_i2c->irq);
	}

	/* release keys */
	for (i = 1; i < touchkey_count; ++i) {
		input_report_key(tkey_i2c->input_dev,
				 touchkey_keycode[i], 0);
	}
	input_sync(tkey_i2c->input_dev);

	touchkey_enable = 0;
	set_touchkey_debug('S');
	printk(KERN_DEBUG "[TouchKey] sec_touchkey_early_suspend\n");
	if (touchkey_enable < 0) {
		printk(KERN_DEBUG "[TouchKey] ---%s---touchkey_enable: %d\n",
		       __func__, touchkey_enable);
		return 0;
	}

#endif	

	return 0;
}
开发者ID:CVlaspoel，项目名称:VSMC-i9105p，代码行数:56，代码来源:cypress-touchkey.c

示例2: melfas_touchkey_early_suspend

static void melfas_touchkey_early_suspend(struct early_suspend *h)
{
#ifdef CONFIG_GENERIC_BLN
    if(0) {
#else
    if(1) {
#endif
	    touchkey_enable = 0;
    }
	    set_touchkey_debug('S');
	    printk(KERN_DEBUG "melfas_touchkey_early_suspend\n");
	    if (touchkey_enable < 0) {
		    printk("---%s---touchkey_enable: %d\n", __FUNCTION__,
		           touchkey_enable);
		    return;
	    }

	   disable_irq(IRQ_TOUCH_INT);
       touchkey_power_off();
}

static void melfas_touchkey_early_resume(struct early_suspend *h)
{
	set_touchkey_debug('R');
	printk(KERN_DEBUG "melfas_touchkey_early_resume\n");
	if (touchkey_enable < 0) {
		printk("---%s---touchkey_enable: %d\n", __FUNCTION__,
		       touchkey_enable);
		return;
	}
#ifndef CONFIG_S5PC110_DEMPSEY_BOARD
	gpio_direction_output(_3_GPIO_TOUCH_EN, 1);
#endif
#if !(defined(CONFIG_ARIES_NTT) || defined(CONFIG_S5PC110_DEMPSEY_BOARD))
	gpio_direction_output(_3_GPIO_TOUCH_CE, 1);
#endif
	init_hw();
	msleep(50);

	//clear interrupt
	if (readl(gpio_pend_mask_mem) & (0x1 << 1))
		writel(readl(gpio_pend_mask_mem) | (0x1 << 1),
		       gpio_pend_mask_mem);

	enable_irq(IRQ_TOUCH_INT);
	touchkey_enable = 1;

}
开发者ID:LinuxBozo，项目名称:Defuse-Kernel，代码行数:48，代码来源:cypress-touchkey.c

示例3: melfas_touchkey_early_resume

static void melfas_touchkey_early_resume(struct early_suspend *h)
{
	set_touchkey_debug('R');
	printk(KERN_DEBUG "melfas_touchkey_early_resume\n");
	if (touchkey_enable < 0) {
		printk("---%s---touchkey_enable: %d\n", __FUNCTION__,
		       touchkey_enable);
		return;
	}
#ifdef CONFIG_KEYPAD_CYPRESS_TOUCH_USE_BLN
	touchkey_power_on();
#else
	gpio_direction_output(_3_GPIO_TOUCH_EN, 1);
#if !defined(CONFIG_ARIES_NTT)
	gpio_direction_output(_3_GPIO_TOUCH_CE, 1);
#endif
#endif
	msleep(50);

	//clear interrupt
	if (readl(gpio_pend_mask_mem) & (0x1 << 1))
		writel(readl(gpio_pend_mask_mem) | (0x1 << 1),
		       gpio_pend_mask_mem);

	enable_irq(IRQ_TOUCH_INT);
	touchkey_enable = 1;

}
开发者ID:developerfromAplerOS，项目名称:universal_lagfix_kernel，代码行数:28，代码来源:cypress-touchkey.c

示例4: melfas_touchkey_early_resume

static void melfas_touchkey_early_resume(struct early_suspend *h)
{
	set_touchkey_debug('R');
	printk(KERN_DEBUG "[TKEY] melfas_touchkey_early_resume\n");
	if (touchkey_enable < 0) {
		printk("[TKEY] %s touchkey_enable: %d\n", __FUNCTION__, touchkey_enable);
		return;
	}

		tkey_vdd_enable(1);
		gpio_request(GPIO_TOUCHKEY_SCL, "TKEY_SCL");
		gpio_direction_input(GPIO_TOUCHKEY_SCL);
		gpio_request(GPIO_TOUCHKEY_SDA, "TKEY_SDA");
		gpio_direction_input(GPIO_TOUCHKEY_SDA);
		init_hw();

if(touchled_cmd_reversed) {
			touchled_cmd_reversed = 0;
			msleep(100);

			if(!touchkey_enable )
				touchkey_enable = 1; 
			i2c_touchkey_write(&touchkey_led_status, 1);
			printk("[TKEY] LED RESERVED !! LED returned on touchkey_led_status = %d\n", touchkey_led_status);
	}
if (get_hw_rev() >=0x02){		
	tkey_led_vdd_enable(1); 	
}	

enable_irq(IRQ_TOUCHKEY_INT);
touchkey_enable = 1;
msleep(50);
touchkey_auto_calibration(1/*on*/); 

}
开发者ID:CL0SeY，项目名称:kernel_P7320T_ICS，代码行数:35，代码来源:cypress-touchkey_q1_skt.c

示例5: melfas_touchkey_early_resume

static void melfas_touchkey_early_resume(struct early_suspend *h)
{
	set_touchkey_debug('R');
	printk(KERN_DEBUG "melfas_touchkey_early_resume\n");
	if (touchkey_enable < 0) {
		printk("---%s---touchkey_enable: %d\n", __FUNCTION__,
		       touchkey_enable);
		return;
	}
	gpio_direction_output(_3_GPIO_TOUCH_EN, 1);
#if !(defined(CONFIG_ARIES_NTT) || defined(CONFIG_S5PC110_CELOX_BOARD))
	gpio_direction_output(_3_GPIO_TOUCH_CE, 1);
#endif
	msleep(50);

	//clear interrupt
#if defined(CONFIG_S5PC110_CELOX_BOARD)		
	if (readl(gpio_pend_mask_mem) & (0x1 << 5))
		writel(readl(gpio_pend_mask_mem) | (0x1 << 5),
		       gpio_pend_mask_mem);
#else
	if (readl(gpio_pend_mask_mem) & (0x1 << 1))
		writel(readl(gpio_pend_mask_mem) | (0x1 << 1),
		       gpio_pend_mask_mem);
#endif

	enable_irq(IRQ_TOUCH_INT);
	touchkey_enable = 1;

}
开发者ID:AustinBleax，项目名称:Bali_SK4G，代码行数:30，代码来源:melfas-touchkey.c

示例6: melfas_touchkey_early_suspend

static int melfas_touchkey_early_suspend(struct early_suspend *h)
{
	touchkey_enable = 0;
	set_touchkey_debug('S');
	printk(KERN_DEBUG "[TouchKey] melfas_touchkey_early_suspend\n");

	if (touchkey_enable < 0) {
		printk(KERN_DEBUG "[TouchKey] ---%s---touchkey_enable: %d\n", __func__, touchkey_enable);
		return 0;
	}

	disable_irq(IRQ_TOUCH_INT);
	gpio_direction_input(_3_GPIO_TOUCH_INT);

#if 0
	gpio_direction_output(_3_GPIO_TOUCH_EN, 0);
	gpio_direction_output(_3_TOUCH_SDA_28V, 0);
	gpio_direction_output(_3_TOUCH_SCL_28V, 0);
	s3c_gpio_setpull(_3_GPIO_TOUCH_INT, S3C_GPIO_PULL_DOWN);
#endif

	/* disable ldo18 */
	touchkey_led_ldo_on(0);

	/* disable ldo11 */
	touchkey_ldo_on(0);
	screen_on = 0;
	return 0;
}
开发者ID:myfluxi，项目名称:xxKernel，代码行数:29，代码来源:cypress-touchkey.c

示例7: melfas_touchkey_early_resume

static void melfas_touchkey_early_resume(struct early_suspend *h)
{
	set_touchkey_debug('R');
    printk(KERN_DEBUG "melfas_touchkey_early_resume : %x\n", touchkey_enable);

	if (touchkey_enable == 1)
		return;

	mutex_lock(&melfas_touchkey_use);

    if(touchkey_enable < 0)
    {
        printk(KERN_DEBUG "---%s---touchkey_enable: %d\n",__FUNCTION__, touchkey_enable);
		mutex_unlock(&melfas_touchkey_use);
        return;
    }
	gpio_direction_output(_3_GPIO_TOUCH_EN, 1);
	gpio_direction_output(_3_GPIO_TOUCH_CE, 1);

    msleep(50);

	//clear interrupt
	if (readl(gpio_pend_mask_mem) & (0x1 << 1))
        writel(readl(gpio_pend_mask_mem)|(0x1<<1), gpio_pend_mask_mem); 

	enable_irq(IRQ_TOUCH_INT);
	touchkey_enable = 1;

	mutex_unlock(&melfas_touchkey_use);

}
开发者ID:ptlgf，项目名称:android_samsung_ariesctc，代码行数:31，代码来源:melfas-touchkey-aries.c

示例8: melfas_touchkey_early_suspend

static void melfas_touchkey_early_suspend(struct early_suspend *h)
{
    set_touchkey_debug('S');
    printk(KERN_DEBUG "melfas_touchkey_early_suspend : %x\n", touchkey_enable);

	if (touchkey_enable == 0)
		return;

	mutex_lock(&melfas_touchkey_use);

    if(touchkey_enable < 0)
    {		
        printk(KERN_DEBUG "---%s---touchkey_enable: %d\n",__FUNCTION__, touchkey_enable);
		mutex_unlock(&melfas_touchkey_use);
        return;
    }
    disable_irq(IRQ_TOUCH_INT);
    gpio_direction_output(_3_GPIO_TOUCH_EN, 0);
    gpio_direction_output(_3_GPIO_TOUCH_CE, 0);
    gpio_direction_output(_3_TOUCH_SDA_28V, 0);
    gpio_direction_output(_3_TOUCH_SCL_28V, 0);
    touchkey_enable = 0;	

    mutex_unlock(&melfas_touchkey_use);

}
开发者ID:ptlgf，项目名称:android_samsung_ariesctc，代码行数:26，代码来源:melfas-touchkey-aries.c

示例9: touchkey_interrupt

static irqreturn_t touchkey_interrupt(int irq, void *dummy)
{
	set_touchkey_debug('I');
	disable_irq_nosync(IRQ_TOUCH_INT);
	queue_work(touchkey_wq, &touchkey_work);
	
	return IRQ_HANDLED;
}
开发者ID:AustinBleax，项目名称:Bali_SK4G，代码行数:8，代码来源:melfas-touchkey.c

示例10: melfas_touchkey_late_resume

static int melfas_touchkey_late_resume(struct early_suspend *h)
{
#ifdef TEST_JIG_MODE
	unsigned char get_touch = 0x40;
#endif

	set_touchkey_debug('R');
	printk(KERN_DEBUG "[TouchKey] melfas_touchkey_late_resume\n");

	/* enable ldo11 */
	touchkey_ldo_on(1);

	if (touchkey_enable < 0) {
		printk(KERN_DEBUG "[TouchKey] ---%s---touchkey_enable: %d\n",
		       __func__, touchkey_enable);
		return 0;
	}
	gpio_direction_output(_3_GPIO_TOUCH_EN, 1);
	gpio_direction_output(_3_TOUCH_SDA_28V, 1);
	gpio_direction_output(_3_TOUCH_SCL_28V, 1);

	gpio_direction_output(_3_GPIO_TOUCH_INT, 1);
	set_irq_type(IRQ_TOUCH_INT, IRQF_TRIGGER_FALLING);
	s3c_gpio_cfgpin(_3_GPIO_TOUCH_INT, _3_GPIO_TOUCH_INT_AF);
	s3c_gpio_setpull(_3_GPIO_TOUCH_INT, S3C_GPIO_PULL_NONE);
	msleep(50);

	touchkey_led_ldo_on(1);

#ifdef WHY_DO_WE_NEED_THIS
	/* clear interrupt */
	if (readl(gpio_pend_mask_mem) & (0x1 << 1)) {
		writel(readl(gpio_pend_mask_mem) | (0x1 << 1),
		       gpio_pend_mask_mem);
	}
#endif

	enable_irq(IRQ_TOUCH_INT);
	touchkey_enable = 1;

	if (touchled_cmd_reversed) {
		touchled_cmd_reversed = 0;
		i2c_touchkey_write(&touchkey_led_status, 1);
		printk("LED returned on\n");
	}

#ifdef TEST_JIG_MODE
	i2c_touchkey_write(&get_touch, 1);
#endif

	return 0;
}
开发者ID:FrozenData，项目名称:SGS2-Kernel-Update2，代码行数:52，代码来源:cypress-touchkey.c

示例11: touchkey_enable_disable

static ssize_t touchkey_enable_disable(struct device *dev,
				       struct device_attribute *attr,
				       const char *buf, size_t size)
{
#if 0
	printk("touchkey_enable_disable %c \n", *buf);
	if (*buf == '0') {
		set_touchkey_debug('d');
		disable_irq(IRQ_TOUCH_INT);
#ifdef CONFIG_KEYPAD_CYPRESS_TOUCH_USE_BLN
		touchkey_power_off();
#else
		gpio_direction_output(_3_GPIO_TOUCH_EN, 0);
#if !defined(CONFIG_ARIES_NTT)
		gpio_direction_output(_3_GPIO_TOUCH_CE, 0);
#endif
#endif
		touchkey_enable = -2;
	} else if (*buf == '1') {
		if (touchkey_enable == -2) {
			set_touchkey_debug('e');
#ifdef CONFIG_KEYPAD_CYPRESS_TOUCH_USE_BLN
			touchkey_power_on();
#else
			gpio_direction_output(_3_GPIO_TOUCH_EN, 1);
#if !defined(CONFIG_ARIES_NTT)
			gpio_direction_output(_3_GPIO_TOUCH_CE, 1);
#endif
#endif
			touchkey_enable = 1;
			enable_irq(IRQ_TOUCH_INT);
		}
	} else {
		printk("touchkey_enable_disable: unknown command %c \n", *buf);
	}
#endif
	return size;
}
开发者ID:developerfromAplerOS，项目名称:universal_lagfix_kernel，代码行数:38，代码来源:cypress-touchkey.c

示例12: sec_touchkey_late_resume

static int sec_touchkey_late_resume(struct early_suspend *h)
{
	struct touchkey_i2c *tkey_i2c =
		container_of(h, struct touchkey_i2c, early_suspend);
#ifdef TEST_JIG_MODE
	unsigned char get_touch = 0x40;
#endif

	set_touchkey_debug('R');
	printk(KERN_DEBUG "[TouchKey] sec_touchkey_late_resume\n");


#if defined(CONFIG_S2VE_TOUCHKEY_REV05)
	printk(KERN_ERR"sec_touchkey_late_resume++\n");
	Touchkey_PowerOnOff(1);
	gpio_set_value(TOUCHKEY_SDA, 0); 
	gpio_set_value(TOUCHKEY_SCL, 0); 

	touchkey_led_on(tkey_i2c, 1);
	touchkey_suspended = 0;
#else

	if (touchkey_enable < 0) {
		printk(KERN_DEBUG "[TouchKey] ---%s---touchkey_enable: %d\n",
		       __func__, touchkey_enable);
		return 0;
	}
	msleep(50);

	touchkey_enable = 1;

#if defined(TK_HAS_AUTOCAL)
	touchkey_autocalibration(tkey_i2c);
#endif

	if (touchled_cmd_reversed) {
		touchled_cmd_reversed = 0;
		i2c_touchkey_write(tkey_i2c->client,
			(u8 *) &touchkey_led_status, 1);
		printk(KERN_DEBUG "[Touchkey] LED returned on\n");
	}
#ifdef TEST_JIG_MODE
	i2c_touchkey_write(tkey_i2c->client, &get_touch, 1);
#endif

	enable_irq(tkey_i2c->irq);

#endif
	return 0;
}
开发者ID:CVlaspoel，项目名称:VSMC-i9105p，代码行数:50，代码来源:cypress-touchkey.c

示例13: melfas_touchkey_early_suspend

static void melfas_touchkey_early_suspend(struct early_suspend *h)
{
	set_touchkey_debug('S');
	if (touchkey_enable < 0) {
		printk("---%s---touchkey_enable: %d\n", __FUNCTION__,
		       touchkey_enable);
		return;
	}
	touchkey_enable = 0;
	disable_irq(IRQ_TOUCH_INT);
	gpio_direction_output(_3_GPIO_TOUCH_EN, 0);
	gpio_direction_output(_3_GPIO_TOUCH_CE, 0);
	gpio_direction_output(_3_TOUCH_SDA_28V, 0);
	gpio_direction_output(_3_TOUCH_SCL_28V, 0);
}
开发者ID:AustinBleax，项目名称:Bali_SK4G，代码行数:15，代码来源:melfas-touchkey-aries.c

示例14: touchkey_enable_disable

static ssize_t touchkey_enable_disable(struct device *dev,
				       struct device_attribute *attr,
				       const char *buf, size_t size)
{
#if 0
	printk("touchkey_enable_disable %c \n", *buf);
	if (*buf == '0') {
		set_touchkey_debug('d');
		disable_irq(IRQ_TOUCH_INT);
		gpio_direction_output(_3_GPIO_TOUCH_EN, 0);
		touchkey_enable = -2;
	} else if (*buf == '1') {
		if (touchkey_enable == -2) {
			set_touchkey_debug('e');
			gpio_direction_output(_3_GPIO_TOUCH_EN, 1);
			touchkey_enable = 1;
			enable_irq(IRQ_TOUCH_INT);
		}
	} else {
		printk("touchkey_enable_disable: unknown command %c \n", *buf);
	}
#endif
	return size;
}
开发者ID:AntonX，项目名称:android_kernel_gb_sgs4g，代码行数:24，代码来源:cypress-touchkey.c

示例15: melfas_touchkey_early_suspend

static void melfas_touchkey_early_suspend(struct early_suspend *h)
{
	touchkey_enable = 0;
	set_touchkey_debug('S');
	printk(KERN_DEBUG "melfas_touchkey_early_suspend\n");
	if (touchkey_enable < 0) {
		printk("---%s---touchkey_enable: %d\n", __FUNCTION__,
		       touchkey_enable);
		return ;
	}

	disable_irq(IRQ_TOUCH_INT);
	gpio_direction_output(_3_GPIO_TOUCH_EN, 0);
#if !(defined(CONFIG_ARIES_NTT) || defined(CONFIG_S5PC110_CELOX_BOARD))
	gpio_direction_output(_3_GPIO_TOUCH_CE, 0);
#endif
	gpio_direction_output(_3_TOUCH_SDA_28V, 0);
	gpio_direction_output(_3_TOUCH_SCL_28V, 0);
}
开发者ID:AustinBleax，项目名称:Bali_SK4G，代码行数:19，代码来源:melfas-touchkey.c


注：本文中的set_touchkey_debug函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。