当前位置: 首页>>代码示例>>C++>>正文

C++ setTargetHotend2函数代码示例

本文整理汇总了C++中setTargetHotend2函数的典型用法代码示例。如果您正苦于以下问题：C++ setTargetHotend2函数的具体用法？C++ setTargetHotend2怎么用？C++ setTargetHotend2使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了setTargetHotend2函数的11个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: checkHitEndstops

void checkHitEndstops()
{
 if( endstop_x_hit || endstop_y_hit || endstop_z_hit) {
   SERIAL_ECHO_START;
   SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
   if(endstop_x_hit) {
     SERIAL_ECHOPAIR(" X:",(float)endstops_trigsteps[X_AXIS]/axis_steps_per_unit[X_AXIS]);
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "X");
   }
   if(endstop_y_hit) {
     SERIAL_ECHOPAIR(" Y:",(float)endstops_trigsteps[Y_AXIS]/axis_steps_per_unit[Y_AXIS]);
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Y");
   }
   if(endstop_z_hit) {
     SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]);
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
   }
   SERIAL_ECHOLN("");
   endstop_x_hit=false;
   endstop_y_hit=false;
   endstop_z_hit=false;
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
   if (abort_on_endstop_hit)
   {
     card.sdprinting = false;
     card.closefile();
     quickStop();
     setTargetHotend0(0);
     setTargetHotend1(0);
     setTargetHotend2(0);
   }
#endif
 }
}
开发者ID:AllenMcAfee，项目名称:Ultimaker2Marlin，代码行数:34，代码来源:stepper.cpp

示例2: lcd_cooldown

static void lcd_cooldown()
{
    setTargetHotend0(0);
    setTargetHotend1(0);
    setTargetHotend2(0);
    setTargetBed(0);
    lcd_return_to_status();
}
开发者ID:tianshiz，项目名称:3DPrinterr，代码行数:8，代码来源:ultralcd.cpp

示例3: lcd_preheat_abs2

void lcd_preheat_abs2()
{
    setTargetHotend2(absPreheatHotendTemp);
    setTargetBed(absPreheatHPBTemp);
    fanSpeed = absPreheatFanSpeed;
    lcd_return_to_status();
    setWatch(); // heater sanity check timer
}
开发者ID:elmarnitsche，项目名称:Firmware-Playground，代码行数:8，代码来源:ultralcd.cpp

示例4: lcd_preheat_pla

void lcd_preheat_pla()
{
    setTargetHotend0(plaPreheatHotendTemp);
    setTargetHotend1(plaPreheatHotendTemp);
    setTargetHotend2(plaPreheatHotendTemp);
    setTargetBed(plaPreheatHPBTemp);
    fanSpeed = plaPreheatFanSpeed;
    lcd_return_to_status();
}
开发者ID:ahathoor，项目名称:DefaPrintteri，代码行数:9，代码来源:ultralcd.cpp

示例5: lcd_preheat_abs

void lcd_preheat_abs()
{
    setTargetHotend0(absPreheatHotendTemp);
    setTargetHotend1(absPreheatHotendTemp);
    setTargetHotend2(absPreheatHotendTemp);
    setTargetBed(absPreheatHPBTemp);
    fanSpeed = absPreheatFanSpeed;
    lcd_return_to_status();
}
开发者ID:ahathoor，项目名称:DefaPrintteri，代码行数:9，代码来源:ultralcd.cpp

示例6: lcd_preheat_pla

void lcd_preheat_pla()
{
    setTargetHotend0(plaPreheatHotendTemp);
    setTargetHotend1(plaPreheatHotendTemp);
    setTargetHotend2(plaPreheatHotendTemp);
    setTargetBed(plaPreheatHPBTemp);
    fanSpeed = plaPreheatFanSpeed;
    lcd_return_to_status();
    setWatch(); // heater sanity check timer
}
开发者ID:tianshiz，项目名称:3DPrinterr，代码行数:10，代码来源:ultralcd.cpp

示例7: lcd_preheat_laybrick

void lcd_preheat_laybrick()
{
    setTargetHotend0(LAYBRICK_PREHEAT_HOTEND_TEMP);
    setTargetHotend1(LAYBRICK_PREHEAT_HOTEND_TEMP);
    setTargetHotend2(LAYBRICK_PREHEAT_HOTEND_TEMP);
    setTargetBed(LAYBRICK_PREHEAT_HPB_TEMP);
    fanSpeed = LAYBRICK_PREHEAT_FAN_SPEED;
    lcd_return_to_status();
    setWatch(); // heater sanity check timer
}
开发者ID:BCN3D，项目名称:Paste-Extruder-Firmware，代码行数:10，代码来源:ultralcd.cpp

示例8: lcd_preheat_nylon

void lcd_preheat_nylon()
{
    setTargetHotend0(nylonPreheatHotendTemp);
    setTargetHotend1(nylonPreheatHotendTemp);
    setTargetHotend2(nylonPreheatHotendTemp);
    setTargetBed(nylonPreheatHPBTemp);
    fanSpeed = nylonPreheatFanSpeed;
    lcd_return_to_status();
    setWatch(); // heater sanity check timer
}
开发者ID:BCN3D，项目名称:Paste-Extruder-Firmware，代码行数:10，代码来源:ultralcd.cpp

示例9: lcd_preheat_abs

void lcd_preheat_abs()
{
    setTargetHotend0(absPreheatHotendTemp);
    setTargetHotend1(absPreheatHotendTemp);
    setTargetHotend2(absPreheatHotendTemp);
    setTargetBed(absPreheatHPBTemp);
#if FAN_PIN > -1
    fanSpeed = absPreheatFanSpeed;
    analogWrite(FAN_PIN,  fanSpeed);
#endif
    lcd_return_to_status();
}
开发者ID:peter6960，项目名称:OpenHardwarecozaFirmwares，代码行数:12，代码来源:ultralcd.cpp

示例10: checkHitEndstops

void checkHitEndstops()
{
 if( endstop_x_hit || endstop_y_hit || endstop_z_hit || endstop_j_hit) {
   SERIAL_ECHO_START;
   snprintf(json_str,JSONSIZE,"{%s:[",MSG_ENDSTOPS_HIT);
   SERIAL_PROTOCOL(json_str);
   comma = false;
   if(endstop_x_hit) {
     SERIAL_PROTOCOLPGM("\"x\"");
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "X");
     comma = true;
   }
   if(endstop_y_hit) {
     if (comma) SERIAL_PROTOCOLPGM(",");
     SERIAL_PROTOCOLPGM("\"y\"");
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Y");
     comma = true;
   }
   if(endstop_z_hit) {
     if (comma) SERIAL_PROTOCOLPGM(",");
     SERIAL_PROTOCOLPGM("\"z\"");
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
     comma = true;
   }
   if(endstop_j_hit) {
     if (comma) SERIAL_PROTOCOLPGM(",");
     SERIAL_PROTOCOLPGM("\"j\"");
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "J");
   }
   SERIAL_PROTOCOL("]}");
   SERIAL_MSG_END;
   endstop_x_hit=false;
   endstop_y_hit=false;
   endstop_z_hit=false;
   endstop_j_hit=false;
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
   if (abort_on_endstop_hit)
   {
     card.sdprinting = false;
     card.closefile();
     quickStop();
     setTargetHotend0(0);
     setTargetHotend1(0);
     setTargetHotend2(0);
   }
#endif
 }
}
开发者ID:ElementRobot，项目名称:firmware，代码行数:48，代码来源:stepper.cpp

示例11: checkHitEndstops

void checkHitEndstops() {
  if (endstop_x_hit || endstop_y_hit || endstop_z_hit || endstop_z_probe_hit) { // #ifdef || endstop_z_probe_hit to save space if needed.
    SERIAL_ECHO_START;
    SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
    if (endstop_x_hit) {
      SERIAL_ECHOPAIR(" X:", (float)endstops_trigsteps[X_AXIS] / axis_steps_per_unit[X_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "X");
    }
    if (endstop_y_hit) {
      SERIAL_ECHOPAIR(" Y:", (float)endstops_trigsteps[Y_AXIS] / axis_steps_per_unit[Y_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Y");
    }
    if (endstop_z_hit) {
      SERIAL_ECHOPAIR(" Z:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
    }
    #ifdef Z_PROBE_ENDSTOP
    if (endstop_z_probe_hit) {
      SERIAL_ECHOPAIR(" Z_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "ZP");
    }
    #endif
    SERIAL_EOL;

    endstops_hit_on_purpose();

    #if defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && defined(SDSUPPORT)
      if (abort_on_endstop_hit) {
        card.sdprinting = false;
        card.closefile();
        quickStop();
        setTargetHotend0(0);
        setTargetHotend1(0);
        setTargetHotend2(0);
        setTargetHotend3(0);
        setTargetBed(0);
      }
    #endif
  }
}
开发者ID:Claude59，项目名称:Mondrian3，代码行数:40，代码来源:stepper.cpp


注：本文中的setTargetHotend2函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。