当前位置: 首页>>代码示例>>C++>>正文

C++ setTargetBed函数代码示例

本文整理汇总了C++中setTargetBed函数的典型用法代码示例。如果您正苦于以下问题：C++ setTargetBed函数的具体用法？C++ setTargetBed怎么用？C++ setTargetBed使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了setTargetBed函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: lcd_preheat_abs_bedonly

void lcd_preheat_abs_bedonly()
{
    setTargetBed(absPreheatHPBTemp);
    fanSpeed = absPreheatFanSpeed;
    lcd_return_to_status();
    setWatch(); // heater sanity check timer
}
开发者ID:elmarnitsche，项目名称:Firmware-Playground，代码行数:7，代码来源:ultralcd.cpp

示例2: lcd_cooldown

////i4
void lcd_cooldown()
{
    setTargetHotend0(0);
    setTargetBed(0);
    fanSpeed = 0;
    lcd_return_to_status();
}
开发者ID:Trideo，项目名称:PrintBox-Max，代码行数:8，代码来源:ultralcd.cpp

示例3: lcd_cooldown

static void lcd_cooldown()
{
    setTargetHotend0(0);
    setTargetHotend1(0);
    setTargetHotend2(0);
    setTargetBed(0);
    lcd_return_to_status();
}
开发者ID:tianshiz，项目名称:3DPrinterr，代码行数:8，代码来源:ultralcd.cpp

示例4: lcd_preheat_flex

void lcd_preheat_flex()
{
    setTargetHotend0(flexPreheatHotendTemp);
    setTargetBed(flexPreheatHPBTemp);
    fanSpeed = 0;
    lcd_return_to_status();
    setWatch(); // heater sanity check timer
}
开发者ID:thisismud，项目名称:Prusa-i3-Plus，代码行数:8，代码来源:ultralcd.cpp

示例5: lcd_preheat_pla2

void lcd_preheat_pla2()
{
    setTargetHotend2(plaPreheatHotendTemp);
    setTargetBed(plaPreheatHPBTemp);
    fanSpeed = plaPreheatFanSpeed;
    lcd_return_to_status();
    setWatch(); // heater sanity check timer
}
开发者ID:elmarnitsche，项目名称:Firmware-Playground，代码行数:8，代码来源:ultralcd.cpp

示例6: lcd_preheat_abs

void lcd_preheat_abs()
{
    setTargetHotend0(absPreheatHotendTemp);
    setTargetHotend1(absPreheatHotendTemp);
    setTargetHotend2(absPreheatHotendTemp);
    setTargetBed(absPreheatHPBTemp);
    fanSpeed = absPreheatFanSpeed;
    lcd_return_to_status();
}
开发者ID:ahathoor，项目名称:DefaPrintteri，代码行数:9，代码来源:ultralcd.cpp

示例7: lcd_preheat_pla

void lcd_preheat_pla()
{
    setTargetHotend0(plaPreheatHotendTemp);
    setTargetHotend1(plaPreheatHotendTemp);
    setTargetHotend2(plaPreheatHotendTemp);
    setTargetBed(plaPreheatHPBTemp);
    fanSpeed = plaPreheatFanSpeed;
    lcd_return_to_status();
}
开发者ID:ahathoor，项目名称:DefaPrintteri，代码行数:9，代码来源:ultralcd.cpp

示例8: mct_ClickBed

void mct_ClickBed(uint8_t line, volatile long &pos, bool &adjustValue, uint8_t which)
{
    adjustValue = !adjustValue;
    if (adjustValue) {
	pos = intround(degTargetBed());
    } else {
	setTargetBed(pos);
    }
}
开发者ID:harlequin-tech，项目名称:MarlinHQ，代码行数:9，代码来源:menu_tempcontrol.cpp

示例9: lcd_preheat_abs

void lcd_preheat_abs()
{
    for(int e = 0; e < EXTRUDERS; e++) {
      setTargetHotend(absPreheatHotendTemp, e);
      fanSpeed[e] = (unsigned char)absPreheatFanSpeed;
    }
    setTargetBed(absPreheatHPBTemp);
    lcd_return_to_status();
}
开发者ID:Lunavast，项目名称:MarlinX2，代码行数:9，代码来源:ultralcd.cpp

示例10: lcd_preheat_nylon

void lcd_preheat_nylon()
{
    setTargetHotend0(nylonPreheatHotendTemp);
    setTargetHotend1(nylonPreheatHotendTemp);
    setTargetHotend2(nylonPreheatHotendTemp);
    setTargetBed(nylonPreheatHPBTemp);
    fanSpeed = nylonPreheatFanSpeed;
    lcd_return_to_status();
    setWatch(); // heater sanity check timer
}
开发者ID:BCN3D，项目名称:Paste-Extruder-Firmware，代码行数:10，代码来源:ultralcd.cpp

示例11: lcd_preheat_abs012

void lcd_preheat_abs012()
{
    setTargetHotend0(absPreheatHotendTemp);
    setTargetHotend1(absPreheatHotendTemp);
    setTargetHotend2(absPreheatHotendTemp);
    setTargetBed(absPreheatHPBTemp);
    fanSpeed = absPreheatFanSpeed;
    lcd_return_to_status();
    setWatch(); // heater sanity check timer
}
开发者ID:elmarnitsche，项目名称:Firmware-Playground，代码行数:10，代码来源:ultralcd.cpp

示例12: lcd_preheat_laybrick

void lcd_preheat_laybrick()
{
    setTargetHotend0(LAYBRICK_PREHEAT_HOTEND_TEMP);
    setTargetHotend1(LAYBRICK_PREHEAT_HOTEND_TEMP);
    setTargetHotend2(LAYBRICK_PREHEAT_HOTEND_TEMP);
    setTargetBed(LAYBRICK_PREHEAT_HPB_TEMP);
    fanSpeed = LAYBRICK_PREHEAT_FAN_SPEED;
    lcd_return_to_status();
    setWatch(); // heater sanity check timer
}
开发者ID:BCN3D，项目名称:Paste-Extruder-Firmware，代码行数:10，代码来源:ultralcd.cpp

示例13: lcd_preheat_abs

void lcd_preheat_abs()
{
    setTargetHotend0(absPreheatHotendTemp);
    setTargetHotend1(absPreheatHotendTemp);
    setTargetHotend2(absPreheatHotendTemp);
    setTargetBed(absPreheatHPBTemp);
#if FAN_PIN > -1
    fanSpeed = absPreheatFanSpeed;
    analogWrite(FAN_PIN,  fanSpeed);
#endif
    lcd_return_to_status();
}
开发者ID:peter6960，项目名称:OpenHardwarecozaFirmwares，代码行数:12，代码来源:ultralcd.cpp

示例14: checkHitEndstops

void checkHitEndstops() {
  if (endstop_x_hit || endstop_y_hit || endstop_z_hit || endstop_z_probe_hit) { // #ifdef || endstop_z_probe_hit to save space if needed.
    SERIAL_ECHO_START;
    SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
    if (endstop_x_hit) {
      SERIAL_ECHOPAIR(" X:", (float)endstops_trigsteps[X_AXIS] / axis_steps_per_unit[X_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "X");
    }
    if (endstop_y_hit) {
      SERIAL_ECHOPAIR(" Y:", (float)endstops_trigsteps[Y_AXIS] / axis_steps_per_unit[Y_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Y");
    }
    if (endstop_z_hit) {
      SERIAL_ECHOPAIR(" Z:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
    }
    #ifdef Z_PROBE_ENDSTOP
    if (endstop_z_probe_hit) {
      SERIAL_ECHOPAIR(" Z_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "ZP");
    }
    #endif
    SERIAL_EOL;

    endstops_hit_on_purpose();

    #if defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && defined(SDSUPPORT)
      if (abort_on_endstop_hit) {
        card.sdprinting = false;
        card.closefile();
        quickStop();
        setTargetHotend0(0);
        setTargetHotend1(0);
        setTargetHotend2(0);
        setTargetHotend3(0);
        setTargetBed(0);
      }
    #endif
  }
}
开发者ID:Claude59，项目名称:Mondrian3，代码行数:40，代码来源:stepper.cpp

示例15: checkHitEndstops

void checkHitEndstops()
{
 if( endstop_xmin_hit || endstop_xmax_hit || endstop_ymin_hit || endstop_ymax_hit || endstop_zmin_hit || endstop_zmax_hit) {
   SERIAL_ECHO_START;
   SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
   if(endstop_xmin_hit || endstop_xmax_hit) {
     SERIAL_ECHOPAIR(" X:",(float)endstops_trigsteps[X_AXIS]/axis_steps_per_unit[X_AXIS]);
     LCD_MESSAGEPGM(MSG_ENDSTOPS_TOUCH "X");
   }
   if(endstop_ymin_hit || endstop_ymax_hit) {
     SERIAL_ECHOPAIR(" Y:",(float)endstops_trigsteps[Y_AXIS]/axis_steps_per_unit[Y_AXIS]);
     LCD_MESSAGEPGM(MSG_ENDSTOPS_TOUCH "Y");
   }
   if(endstop_zmin_hit || endstop_zmax_hit) {
     SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]);
     LCD_MESSAGEPGM(MSG_ENDSTOPS_TOUCH "Z");
   }
   SERIAL_ECHOLN("");
   endstop_xmin_hit=false;
   endstop_xmax_hit=false;
   endstop_ymin_hit=false;
   endstop_ymax_hit=false;
   endstop_zmin_hit=false;
   endstop_zmax_hit=false;
#if defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && defined(SDSUPPORT)
   if (abort_on_endstop_hit)
   {
     card.sdprinting = false;
     card.closefile();
     quickStop();
     setTargetHotend0(0); 
     setTargetHotend1(0);
     setTargetHotend2(0);
     setTargetHotend3(0);
     setTargetBed(0);
   }
#endif
 }
}
开发者ID:Salcka，项目名称:Marlin，代码行数:39，代码来源:stepper.cpp


注：本文中的setTargetBed函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。