C++ setParity函数代码示例

void NetworkManager::SerialSetting::fromMap(const QVariantMap &setting)
{
    if (setting.contains(QLatin1String(NM_SETTING_SERIAL_BAUD))) {
        setBaud(setting.value(QLatin1String(NM_SETTING_SERIAL_BAUD)).toUInt());
    }

    if (setting.contains(QLatin1String(NM_SETTING_SERIAL_BITS))) {
        setBits(setting.value(QLatin1String(NM_SETTING_SERIAL_BITS)).toUInt());
    }

    if (setting.contains(QLatin1String(NM_SETTING_SERIAL_PARITY))) {
        QChar character = setting.value(QLatin1String(NM_SETTING_SERIAL_PARITY)).toChar();

        if (character == 'n') {
            setParity(NoParity);
        } else if (character == 'E') {
            setParity(EvenParity);
        } else if (character == 'o') {
            setParity(OddParity);
        }
    }

    if (setting.contains(QLatin1String(NM_SETTING_SERIAL_STOPBITS))) {
        setStopbits(setting.value(QLatin1String(NM_SETTING_SERIAL_STOPBITS)).toUInt());
    }

    if (setting.contains(QLatin1String(NM_SETTING_SERIAL_SEND_DELAY))) {
        setSendDelay((Setting::SecretFlagType)setting.value(QLatin1String(NM_SETTING_SERIAL_SEND_DELAY)).toULongLong());
    }
}

bool serial::setFormat (format_t fmt)
{
	bool r = true;

	switch(fmt) {
	case serial::Format7E1:
		r &= setDatabits(serial::DB7);
		r &= setStopbits(serial::SB1);
		r &= setParity(serial::ParityEven);
		break;
	case serial::Format7O1:
		r &= setDatabits(serial::DB7);
		r &= setStopbits(serial::SB1);
		r &= setParity(serial::ParityOdd);
		break;
	case serial::Format8N1:
	default:
		r &= setDatabits(serial::DB8);
		r &= setStopbits(serial::SB1);
		r &= setParity(serial::ParityNone);
		break;
	}

	return r;
}

SerialPort::SerialPort(const string device)
	: m_fd(0), m_baudRate(0), m_wordSize(0), m_asyncTimeout(DEFAULT_ASYNC_TIMEOUT)
{
	if((m_fd = ::open(device.c_str(), O_RDWR | O_NOCTTY)) < 0)
		throw SysException();

	::bzero(&m_term, sizeof(m_term));

	::tcgetattr(m_fd, &m_termOld);

	setBaudRate(DEFAULT_BAUD_RATE);
	setWordSize(DEFAULT_WORD_SIZE);
	setParity(DEFAULT_PARITY);

	m_term.c_cflag |= CLOCAL | CREAD;
	m_term.c_iflag = IGNPAR;
	m_term.c_oflag = OPOST;
	m_term.c_lflag = 0;

	m_term.c_cc[VTIME] = 0;
	m_term.c_cc[VMIN] = 1;

	setAttr();

	if(::fcntl(m_fd, F_SETOWN, getpid()) == -1)
		throw SysException();
}

static int openTouchDev( char const *devName ){
   int fd = -1 ;
   if( !isSerial(devName) ){
      fd = open(devName, O_RDONLY);
   }
   else {
      printf( "Serial touch screen\n" );
      char const *end = strchr( devName, ',' );
      if( 0 == end )
         end = devName + strlen(devName);
      unsigned nameLen = end-devName ;
      printf( "nameLen: %u, end %p\n", nameLen, end );
      char deviceName[512];
      if( nameLen < sizeof(deviceName) ){
         memcpy( deviceName, devName, nameLen );
         deviceName[nameLen] = '\0' ;
         unsigned baud = 9600 ;
         unsigned databits = 8 ;
         char parity = 'N' ;
         unsigned stop = 1 ;
         if( '\0' != *end ){
            end++ ;
            baud = 0 ; 
            while( isdigit(*end) ){
               baud *= 10 ;
               baud += ( *end-'0' );
               end++ ;
            }

            if( ',' == *end ){
               end++ ;
               databits = *end-'0' ;
               end++ ;
               if( ',' == *end ){
                  end++ ;
                  parity = *end++ ;
                  if( ',' == *end ){
                     stop = end[1] - '0';
                  }
               }
            }
         }
         fd = open( deviceName, O_RDWR );
         if( 0 < fd ){
            printf( "settings: %s,%u,%u,%c,%u\n", deviceName, baud, databits, parity, stop );
            setBaud( fd, baud );
            setRaw( fd );
            setDataBits( fd, databits );
            setStopBits( fd, stop );
            setParity( fd, parity );
         }
         else
            perror( deviceName );
      }
      else
         fprintf( stderr, "Invalid touch device name\n" );
   }

   return fd ;
}

/*!
\fn bool Posix_QextSerialPort::open(int=0)
Opens a serial port.  Note that this function does not specify which device to open.  If you need
to open a device by name, see Posix_QextSerialPort::open(const char*).  This function has no 
effect if the port associated with the class is already open.  The port is also configured to the 
current settings, as stored in the Settings structure.
*/
bool Posix_QextSerialPort::open(int) {
    LOCK_MUTEX();
    if (!portOpen) {

        /*open the port*/
        Posix_File->setName(portName);
        if (Posix_File->open(IO_Async|IO_Raw|IO_ReadWrite)) {
            portOpen=true;
        }

        /*configure port settings*/
        tcgetattr(Posix_File->handle(), &Posix_CommConfig);

        /*set up other port settings*/
        Posix_CommConfig.c_cflag|=CREAD|CLOCAL;
        Posix_CommConfig.c_lflag&=(~(ICANON|ECHO|ECHOE|ECHOK|ECHONL|ISIG));
        Posix_CommConfig.c_iflag&=(~(INPCK|IGNPAR|PARMRK|ISTRIP|IXANY));
        Posix_CommConfig.c_oflag&=(~OPOST);
        Posix_CommConfig.c_cc[VMIN]=0;
        Posix_CommConfig.c_cc[VINTR] = _POSIX_VDISABLE; 
        Posix_CommConfig.c_cc[VQUIT] = _POSIX_VDISABLE; 
        Posix_CommConfig.c_cc[VSTART] = _POSIX_VDISABLE; 
        Posix_CommConfig.c_cc[VSTOP] = _POSIX_VDISABLE; 
        Posix_CommConfig.c_cc[VSUSP] = _POSIX_VDISABLE; 
        setBaudRate(Settings.BaudRate);
        setDataBits(Settings.DataBits);
        setStopBits(Settings.StopBits);
        setParity(Settings.Parity);
        setFlowControl(Settings.FlowControl);
        setTimeout(Posix_Copy_Timeout.tv_sec, Posix_Copy_Timeout.tv_usec);
        tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
    }
    UNLOCK_MUTEX();
    return portOpen;
}

bool QSerialPort::open(int block)
{
	if( block== 1) portDesc = ::open(portName.toAscii(),O_RDWR);
	else portDesc = ::open(portName.toAscii(),O_RDWR | O_NONBLOCK );
	if(portDesc == -1)
	{
		return false;
	}
	portOpen = true;

	tcgetattr(portDesc, &portConfig);
	
	portConfig.c_cflag|=(CLOCAL | CREAD);
	portConfig.c_lflag&=(~(ICANON|ECHO|ECHOE|ECHOK|ECHONL|ISIG));
	portConfig.c_iflag&=(~(IGNBRK|BRKINT|PARMRK|ISTRIP |INLCR| IGNCR|ICRNL|IXON)); //  (~(INPCK|IGNPAR|PARMRK|ISTRIP|IXANY));
	portConfig.c_iflag&=~(ICRNL);

	portConfig.c_oflag&=(~OPOST);
	
	tcsetattr(portDesc, TCSANOW, &portConfig);

	setBaudRate(settings.baudRate);
	setDataBits(settings.dataBits);
	setFlowControl(settings.flowControl);
	setParity(settings.parity);
	setStopBits(settings.stopBits);
	setDtr();
	setRts();

	connect(&portFile, SIGNAL(readyRead()), this, SLOT(slotNotifierActivated()));

	return true;
}

void
SerialPort::setSerial(int baud, int dataBits, int parity, int stopBits)
{
    setBaud(baud);
    setDataBits(dataBits);
    setParity(parity);
    setStopBits(stopBits);
}

/*!
\fn bool Win_QextSerialPort::open(OpenMode mode)
Opens a serial port.  Note that this function does not specify which device to open.  If you need
to open a device by name, see Win_QextSerialPort::open(const char*).  This function has no effect
if the port associated with the class is already open.  The port is also configured to the current
settings, as stored in the Settings structure.
*/
bool Win_QextSerialPort::open(OpenMode mode) {
	unsigned long confSize = sizeof(COMMCONFIG);
	Win_CommConfig.dwSize = confSize;
	DWORD dwFlagsAndAttributes = 0;
	if (queryMode() == QextSerialBase::EventDriven)
		dwFlagsAndAttributes += FILE_FLAG_OVERLAPPED;

    LOCK_MUTEX();
    if (mode == QIODevice::NotOpen)
        return isOpen();
    if (!isOpen()) {
        /*open the port*/
        Win_Handle=CreateFileA(port.toLatin1(), GENERIC_READ|GENERIC_WRITE,
                              FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, OPEN_EXISTING, dwFlagsAndAttributes, NULL);
        if (Win_Handle!=INVALID_HANDLE_VALUE)
        {
            /*configure port settings*/
            GetCommConfig(Win_Handle, &Win_CommConfig, &confSize);
            GetCommState(Win_Handle, &(Win_CommConfig.dcb));

            /*set up parameters*/
            Win_CommConfig.dcb.fBinary=TRUE;
            Win_CommConfig.dcb.fInX=FALSE;
            Win_CommConfig.dcb.fOutX=FALSE;
            Win_CommConfig.dcb.fAbortOnError=FALSE;
            Win_CommConfig.dcb.fNull=FALSE;
            setBaudRate(Settings.BaudRate);
            setDataBits(Settings.DataBits);
            setStopBits(Settings.StopBits);
            setParity(Settings.Parity);
            setFlowControl(Settings.FlowControl);
            setTimeout(Settings.Timeout_Millisec);
            SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));

            //init event driven approach
			if (queryMode() == QextSerialBase::EventDriven) {
		        Win_CommTimeouts.ReadIntervalTimeout = MAXDWORD;
		        Win_CommTimeouts.ReadTotalTimeoutMultiplier = 0;
		        Win_CommTimeouts.ReadTotalTimeoutConstant = 0;
				Win_CommTimeouts.WriteTotalTimeoutMultiplier = 0;
				Win_CommTimeouts.WriteTotalTimeoutConstant = 0;
				SetCommTimeouts(Win_Handle, &Win_CommTimeouts);
            	if (!SetCommMask( Win_Handle, EV_TXEMPTY | EV_RXCHAR | EV_DSR)) {
            		qWarning("Failed to set Comm Mask. Error code: %ld", GetLastError());
					UNLOCK_MUTEX();
            		return false;
            	}
            	overlapThread->start();
            }
			QIODevice::open(mode);
        }
    } else {
		UNLOCK_MUTEX();
    	return false;
    }
    UNLOCK_MUTEX();
    return isOpen();
}

void Serial::config(uint32_t speed, Serial::Parity parity, Serial::WordLength dataBits, Serial::StopBits stopBits, HardwareFlowControl hardwareFlow)
{
    disable(Device::Part::All);
    setSpeed(speed);
    setParity(parity);
    setWordLength(dataBits);
    setStopBits(stopBits);
    setHardwareFlowControl(hardwareFlow);
}

/*! \brief SerialDevice::stopDevice Is the serial interface's implementation of setDefaults.
 * Sets the serial devices to the default values. (Rate=9600, Parity=None, Flow=None, Data=8, Stop=1)
 */
void SerialDevice::setDefaults()
{
    statusReady = false;
    setBaudRate(9600);
    setParity(0);
    setFlowControl(0);
    setDataBits(8);
    setStopBits(1);
}

/*!
Sets the port settigns.
*/
void QextSerialPort::setPortSetting(const PortSettings& settings)
{
    setBaudRate(settings.BaudRate);
    setDataBits(settings.DataBits);
    setParity(settings.Parity);
    setStopBits(settings.StopBits);
    setFlowControl(settings.FlowControl);
    setTimeout(settings.Timeout_Millisec);
}

/*!
		\fn Win_QextSerialPort::Win_QextSerialPort(const PortSettings& settings)
			Constructs a port with default name and specified settings.
*/
Win_QextSerialPort::Win_QextSerialPort(const PortSettings& settings) {
	Win_Handle=INVALID_HANDLE_VALUE;
	setBaudRate(settings.BaudRate);
	setDataBits(settings.DataBits);
	setStopBits(settings.StopBits);
	setParity(settings.Parity);
	setFlowControl(settings.FlowControl);
	setTimeout(settings.Timeout_Sec, settings.Timeout_Millisec);
}

/*!
Opens the serial port associated to this class.
This function has no effect if the port associated with the class is already open.
The port is also configured to the current settings, as stored in the Settings structure.
*/
bool QextSerialPort::open(OpenMode mode)
{
    QMutexLocker lock(mutex);
    if (mode == QIODevice::NotOpen)
        return isOpen();
    if (!isOpen()) {
        qDebug() << "trying to open file" << port.toAscii();
        //note: linux 2.6.21 seems to ignore O_NDELAY flag
        if ((fd = ::open(port.toAscii() ,O_RDWR | O_NOCTTY | O_NDELAY)) != -1) {
            qDebug("file opened succesfully");

            setOpenMode(mode);              // Flag the port as opened
            tcgetattr(fd, &old_termios);    // Save the old termios
            Posix_CommConfig = old_termios; // Make a working copy


            /* the equivelent of cfmakeraw() to enable raw access */
#ifdef HAVE_CFMAKERAW
            cfmakeraw(&Posix_CommConfig);   // Enable raw access
#else
            Posix_CommConfig.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP
                                    | INLCR | IGNCR | ICRNL | IXON);
            Posix_CommConfig.c_oflag &= ~OPOST;
            Posix_CommConfig.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
            Posix_CommConfig.c_cflag &= ~(CSIZE | PARENB);
            Posix_CommConfig.c_cflag |= CS8;
#endif

            /*set up other port settings*/
            Posix_CommConfig.c_cflag|=CREAD|CLOCAL;
            Posix_CommConfig.c_lflag&=(~(ICANON|ECHO|ECHOE|ECHOK|ECHONL|ISIG));
            Posix_CommConfig.c_iflag&=(~(INPCK|IGNPAR|PARMRK|ISTRIP|ICRNL|IXANY));
            Posix_CommConfig.c_oflag&=(~OPOST);
            Posix_CommConfig.c_cc[VMIN]= 0;
#ifdef _POSIX_VDISABLE  // Is a disable character available on this system?
            // Some systems allow for per-device disable-characters, so get the
            //  proper value for the configured device
            const long vdisable = fpathconf(fd, _PC_VDISABLE);
            Posix_CommConfig.c_cc[VINTR] = vdisable;
            Posix_CommConfig.c_cc[VQUIT] = vdisable;
            Posix_CommConfig.c_cc[VSTART] = vdisable;
            Posix_CommConfig.c_cc[VSTOP] = vdisable;
            Posix_CommConfig.c_cc[VSUSP] = vdisable;
#endif //_POSIX_VDISABLE
            setBaudRate(Settings.BaudRate);
            setDataBits(Settings.DataBits);
            setParity(Settings.Parity);
            setStopBits(Settings.StopBits);
            setFlowControl(Settings.FlowControl);
            setTimeout(Settings.Timeout_Millisec);
            tcsetattr(fd, TCSAFLUSH, &Posix_CommConfig);

            if (queryMode() == QextSerialPort::EventDriven) {
                readNotifier = new QSocketNotifier(fd, QSocketNotifier::Read, this);
                connect(readNotifier, SIGNAL(activated(int)), this, SIGNAL(readyRead()));
            }

/*!
Opens a serial port.  Note that this function does not specify which device to open.  If you need
to open a device by name, see QextSerialPort::open(const char*).  This function has no effect
if the port associated with the class is already open.  The port is also configured to the current
settings, as stored in the Settings structure.
*/
bool QextSerialPort::open(OpenMode mode) {
    unsigned long confSize = sizeof(COMMCONFIG);
    Win_CommConfig.dwSize = confSize;
    DWORD dwFlagsAndAttributes = 0;
    if (queryMode() == QextSerialPort::EventDriven)
        dwFlagsAndAttributes += FILE_FLAG_OVERLAPPED;

    QMutexLocker lock(mutex);
    if (mode == QIODevice::NotOpen)
        return isOpen();
    if (!isOpen()) {
        /*open the port*/
        Win_Handle=CreateFileA(port.toAscii(), GENERIC_READ|GENERIC_WRITE,
                              0, NULL, OPEN_EXISTING, dwFlagsAndAttributes, NULL);
        if (Win_Handle!=INVALID_HANDLE_VALUE) {
            QIODevice::open(mode);
            /*configure port settings*/
            GetCommConfig(Win_Handle, &Win_CommConfig, &confSize);
            GetCommState(Win_Handle, &(Win_CommConfig.dcb));

            /*set up parameters*/
            Win_CommConfig.dcb.fBinary=TRUE;
            Win_CommConfig.dcb.fInX=FALSE;
            Win_CommConfig.dcb.fOutX=FALSE;
            Win_CommConfig.dcb.fAbortOnError=FALSE;
            Win_CommConfig.dcb.fNull=FALSE;
            setBaudRate(Settings.BaudRate);
            setDataBits(Settings.DataBits);
            setStopBits(Settings.StopBits);
            setParity(Settings.Parity);
            setFlowControl(Settings.FlowControl);
            setTimeout(Settings.Timeout_Millisec);
            SetCommConfig(Win_Handle, &Win_CommConfig, sizeof(COMMCONFIG));

            //init event driven approach
            if (queryMode() == QextSerialPort::EventDriven) {
                Win_CommTimeouts.ReadIntervalTimeout = MAXDWORD;
                Win_CommTimeouts.ReadTotalTimeoutMultiplier = 0;
                Win_CommTimeouts.ReadTotalTimeoutConstant = 0;
                Win_CommTimeouts.WriteTotalTimeoutMultiplier = 0;
                Win_CommTimeouts.WriteTotalTimeoutConstant = 0;
                SetCommTimeouts(Win_Handle, &Win_CommTimeouts);
                if (!SetCommMask( Win_Handle, EV_TXEMPTY | EV_RXCHAR | EV_DSR)) {
                    qWarning() << "failed to set Comm Mask. Error code:", GetLastError();
                    return false;
                }
                winEventNotifier = new QWinEventNotifier(overlap.hEvent, this);
                connect(winEventNotifier, SIGNAL(activated(HANDLE)), this, SLOT(onWinEvent(HANDLE)));
                WaitCommEvent(Win_Handle, &eventMask, &overlap);
            }
        }
    } else {
        return false;
    }
    return isOpen();
}

/*!
\fn Posix_QextSerialPort::Posix_QextSerialPort(const char* name, const PortSettings& settings)
Constructs a port with specified name and settings.
*/
Posix_QextSerialPort::Posix_QextSerialPort(const char* name, const PortSettings& settings)
                     :QextSerialBase(name) {
    construct();
    setBaudRate(settings.BaudRate);
    setDataBits(settings.DataBits);
    setStopBits(settings.StopBits);
    setParity(settings.Parity);
    setFlowControl(settings.FlowControl);
    setTimeout(settings.Timeout_Sec, settings.Timeout_Millisec);
}