C++ serial_flush函数代码示例

void test_loopback(void) {
    serial_t serial;
    unsigned int count;
    time_t start, stop;
    uint8_t lorem_ipsum[] = "Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.";
    uint8_t lorem_hugesum[4096*3];
    uint8_t buf[sizeof(lorem_hugesum)];

    ptest();

    passert(serial_open(&serial, device, 115200) == 0);

    /* Test write/flush/read */
    passert(serial_write(&serial, lorem_ipsum, sizeof(lorem_ipsum)) == sizeof(lorem_ipsum));
    passert(serial_flush(&serial) == 0);
    passert(serial_read(&serial, buf, sizeof(lorem_ipsum), -1) == sizeof(lorem_ipsum));
    passert(memcmp(lorem_ipsum, buf, sizeof(lorem_ipsum)) == 0);

    /* Test poll/write/flush/poll/input waiting/read */
    passert(serial_poll(&serial, 500) == 0); /* Should timeout */
    passert(serial_write(&serial, lorem_ipsum, sizeof(lorem_ipsum)) == sizeof(lorem_ipsum));
    passert(serial_flush(&serial) == 0);
    passert(serial_poll(&serial, 500) == 1);
    usleep(500000);
    passert(serial_input_waiting(&serial, &count) == 0);
    passert(count == sizeof(lorem_ipsum));
    passert(serial_read(&serial, buf, sizeof(lorem_ipsum), -1) == sizeof(lorem_ipsum));
    passert(memcmp(lorem_ipsum, buf, sizeof(lorem_ipsum)) == 0);

    /* Test non-blocking poll */
    passert(serial_poll(&serial, 0) == 0);

    /* Test a very large read-write (likely to exceed internal buffer size (~4096)) */
    memset(lorem_hugesum, 0xAA, sizeof(lorem_hugesum));
    passert(serial_write(&serial, lorem_hugesum, sizeof(lorem_hugesum)) == sizeof(lorem_hugesum));
    passert(serial_flush(&serial) == 0);
    passert(serial_read(&serial, buf, sizeof(lorem_hugesum), -1) == sizeof(lorem_hugesum));
    passert(memcmp(lorem_hugesum, buf, sizeof(lorem_hugesum)) == 0);

    /* Test read timeout */
    start = time(NULL);
    passert(serial_read(&serial, buf, sizeof(buf), 2000) == 0);
    stop = time(NULL);
    passert((stop - start) > 1);

    /* Test non-blocking read */
    start = time(NULL);
    passert(serial_read(&serial, buf, sizeof(buf), 0) == 0);
    stop = time(NULL);
    /* Assuming we weren't context switched out for a second and weren't on a
     * thin time boundary ;) */
    passert((stop - start) == 0);

    passert(serial_close(&serial) == 0);
}

/*
 * rs_transaction
 * We assume that rig!=NULL, rig->state!= NULL, data!=NULL, data_len!=NULL
 */
int rs_transaction(RIG *rig, const char *cmd, int cmd_len, char *data, int *data_len)
{
	int retval;
	struct rig_state *rs;

	rs = &rig->state;

	serial_flush(&rs->rigport);

	retval = write_block(&rs->rigport, cmd, cmd_len);
	if (retval != RIG_OK)
		return retval;


	/* no data expected */
	if (!data || !data_len)
		return RIG_OK;

	retval = read_string(&rs->rigport, data, BUFSZ, CR, 1);
	if (retval < 0)
		return retval;
	*data_len = retval;

	return RIG_OK;
}

/*
 * ar3k_transaction
 * We assume that rig!=NULL, rig->state!= NULL
 * Otherwise, you'll get a nice seg fault. You've been warned!
 * return value: RIG_OK if everything's fine, negative value otherwise
 * TODO: error case handling
 */
static int ar3k_transaction(RIG *rig, const char *cmd, int cmd_len, char *data, int *data_len)
{
	int retval;
	struct rig_state *rs;

	rs = &rig->state;

	serial_flush(&rs->rigport);

	retval = write_block(&rs->rigport, cmd, cmd_len);
	if (retval != RIG_OK)
		return retval;

	/* will flush data on next transaction */
	if (!data || !data_len)
		return RIG_OK;

	retval = read_string(&rs->rigport, data, BUFSZ, EOM, strlen(EOM));
	if (retval == -RIG_ETIMEOUT)
		retval = 0;
	if (retval < 0)
		return retval;

	*data_len = retval;

	return RIG_OK;
}

int changeUartBaudRate() {
	printf("ok\r\n");
	serial_flush();
	_delay_ms(1);
	setUartBaudRate();
	return OK;
}

static GSList *center_scan(const char *conn, const char *serialcomm, int idx)
{
	int i;
	struct sr_dev_inst *sdi;
	struct dev_context *devc;
	struct sr_serial_dev_inst *serial;

	serial = sr_serial_dev_inst_new(conn, serialcomm);

	if (serial_open(serial, SERIAL_RDWR) != SR_OK)
		return NULL;

	serial_flush(serial);

	sr_info("Found device on port %s.", conn);

	sdi = g_malloc0(sizeof(struct sr_dev_inst));
	sdi->status = SR_ST_INACTIVE;
	sdi->vendor = g_strdup(center_devs[idx].vendor);
	sdi->model = g_strdup(center_devs[idx].device);
	devc = g_malloc0(sizeof(struct dev_context));
	sdi->inst_type = SR_INST_SERIAL;
	sdi->conn = serial;
	sdi->priv = devc;

	for (i = 0; i < center_devs[idx].num_channels; i++)
		sr_channel_new(sdi, i, SR_CHANNEL_ANALOG, TRUE, channel_names[i]);

	serial_close(serial);

	return g_slist_append(NULL, sdi);
}

static SERIALPORT *serial_open(const char *device){
    HANDLE fh;
    DCB dcb={sizeof(DCB)};
    COMMTIMEOUTS timeouts;
    SERIALPORT *port;

    fh = CreateFile(device,GENERIC_READ|GENERIC_WRITE,0,NULL,
      OPEN_EXISTING,FILE_ATTRIBUTE_NORMAL,NULL);
    if (!fh) return NULL;

    port = malloc(sizeof(SERIALPORT));
    ZeroMemory(port, sizeof(SERIALPORT));
    port->fh = fh;

    /* save current port settings */
    GetCommState(fh,&port->dcb_save);
    GetCommTimeouts(fh,&port->timeouts_save);

    dcb.DCBlength=sizeof(DCB);
    BuildCommDCB("96,n,8,1",&dcb);
    SetCommState(fh,&dcb);

    ZeroMemory(&timeouts,sizeof(timeouts));
    timeouts.ReadTotalTimeoutConstant=1;
    timeouts.WriteTotalTimeoutConstant=1;
    SetCommTimeouts(fh,&timeouts);

    serial_flush(port);

    return port;
}

/*
 * drake_transaction
 * We assume that rig!=NULL, rig->state!= NULL, data!=NULL, data_len!=NULL
 */
int drake_transaction(RIG *rig, const char *cmd, int cmd_len, char *data, int *data_len)
{
	int retval;
	struct rig_state *rs;

	rs = &rig->state;

	serial_flush(&rs->rigport);

	retval = write_block(&rs->rigport, cmd, cmd_len);

	if (retval != RIG_OK)
		return retval;

	/* no data expected, TODO: flush input? */
	if (!data || !data_len)
		return 0;

	retval = read_string(&rs->rigport, data, BUFSZ, LF, 1);

	if (retval == -RIG_ETIMEOUT)
		retval = 0;

	if (retval < 0)
		return retval;

	*data_len = retval;

	return RIG_OK;
}

/**
 * ic10_transaction
 * Assumes rig!=NULL rig->state!=NULL rig->caps!=NULL
**/
int ic10_transaction (RIG *rig, const char *cmd, int cmd_len, char *data, int *data_len)
{
	int retval;
	struct rig_state *rs;

	rs = &rig->state;

	serial_flush(&rs->rigport);

	retval = write_block(&rs->rigport, cmd, cmd_len);
	if (retval != RIG_OK)
		return retval;

	if (!data || !data_len)
		return 0;

	retval = read_string(&rs->rigport, data, 50, ";", 1);
   	if (retval == -RIG_ETIMEOUT)
		retval = 0;
	if (retval < 0)
		return retval;
	*data_len = retval;

    return RIG_OK;
}

/*
 * racal_transaction
 * We assume that rig!=NULL, rig->state!= NULL
 *
 * TODO: Status Response handling with G/T commands
 */
static int racal_transaction(RIG *rig, const char *cmd, char *data, int *data_len)
{
	struct racal_priv_data *priv = (struct racal_priv_data*)rig->state.priv;
	struct rig_state *rs = &rig->state;
	char cmdbuf[BUFSZ+1];
	int cmd_len;
	int retval;

	cmd_len = sprintf(cmdbuf, SOM "%d%s" EOM, priv->receiver_id, cmd);

	serial_flush(&rs->rigport);

	retval = write_block(&rs->rigport, cmdbuf, cmd_len);
	if (retval != RIG_OK)
		return retval;


	/* no data expected */
	if (!data || !data_len) {
		return retval;
	}

	retval = read_string(&rs->rigport, data, BUFSZ, EOM, strlen(EOM));
	if (retval <= 0)
		return retval;

	/* strip CR from string
	 */
	if (data[retval-1] == '\x0d')  {
		data[--retval] = '\0';	/* chomp */
	}
	*data_len = retval;
	return RIG_OK;
}

/******** OS Specific Serial I/O routines *******/
#if TARGET_HOST_POSIX_X11 /* ==> Linux/BSD/UNIX POSIX serial I/O */
static SERIALPORT *serial_open ( const char *device )
{
    int fd;
    struct termios termio;
    SERIALPORT *port;

    fd = open(device, O_RDWR | O_NONBLOCK );
    if (fd <0) {
        perror(device);
        return NULL;
    }

    port = malloc(sizeof(SERIALPORT));
    memset(port, 0, sizeof(SERIALPORT));
    port->fd = fd;

    /* save current port settings */
    tcgetattr(fd,&port->termio_save);

    memset(&termio, 0, sizeof(termio));
    termio.c_cflag = CS8 | CREAD | HUPCL ;
    termio.c_iflag = IGNPAR | IGNBRK ;
    termio.c_cc[VTIME]    = 0;   /* inter-character timer */
    termio.c_cc[VMIN]     = 1;   /* block read until 1 chars received, when blocking I/O */

    cfsetispeed(&termio, B9600);
    cfsetospeed(&termio, B9600);
    tcsetattr(fd,TCSANOW,&termio);

    serial_flush(port);
    return port;
}

int get_num_files(serial_handle_t serial_handle) {
    int r;
    char reply[2];


    // flush the serial port
    r = serial_flush(serial_handle);
    if (r < 0) {
        return -1;
    }

    // send the command to request the number of recorded files
    r = serial_write_byte(serial_handle, 0x01);
    if (r < 1) {
        return -1;
    }

    // read the reply, 2 bytes
    r = serial_read(serial_handle, reply, 2, 500*1000);
    if (r < 2) {
        return -1;
    }

    g_debug("cmd 0x01 (get num files), 2-byte response: 0x%02x 0x%02x", reply[0], reply[1]);

    // but only the second byte matters
    return reply[1];
} 

int frg100_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
  unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0xf7};
  int retval;

  if (level != RIG_LEVEL_RAWSTR)
	  return -RIG_EINVAL;

  serial_flush(&rig->state.rigport);

  /* send READ STATUS(Meter only) cmd to rig  */
  retval = write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
  if (retval < 0)
	  return retval;

  /* read back the 1 byte */
  retval = read_block(&rig->state.rigport, (char *) cmd, 5);

  if (retval < 1) {
	rig_debug(RIG_DEBUG_ERR,"%s: read meter failed %d\n",
			__FUNCTION__,retval);

	return retval < 0 ? retval : -RIG_EIO;
  }
  val->i = cmd[0];

  return RIG_OK;
}

/**
 *  easycomm_transaction
 *
 *  Assumes rot!=NULL and cmdstr!=NULL
 *
 *  cmdstr   - string to send to rotator
 *  data     - buffer for reply string
 *  data_len - (input) Maximum size of buffer
 *             (output) Number of bytes read.
 */
static int
easycomm_transaction (ROT *rot, const char *cmdstr, char *data, size_t data_len)
{
  struct rot_state *rs;
  int retval;

  rig_debug(RIG_DEBUG_TRACE, "%s called: %s\n", __FUNCTION__, cmdstr);

  if (!rot )
    return -RIG_EINVAL;

  rs = &rot->state;
  serial_flush(&rs->rotport);
  retval = write_block(&rs->rotport, cmdstr, strlen(cmdstr));
  if (retval != RIG_OK) {
      goto transaction_quit;
  }

  if (data == NULL || data_len <= 0)
    return RIG_OK;  /* don't want a reply */

  memset(data,0,data_len);
  retval = read_string(&rs->rotport, data, data_len, "\n", 1);
  if (retval < 0) {
    rig_debug(RIG_DEBUG_TRACE, "%s read_string failed with status %d\n", __FUNCTION__, retval);
    goto transaction_quit;
  } else {
    rig_debug(RIG_DEBUG_TRACE, "%s read_string: %s\n", __FUNCTION__, data);
    retval = RIG_OK;
  }

  transaction_quit:
  return retval;
}

static int
pcr_transaction(RIG * rig, const char *cmd)
{
	int err;
	struct rig_state *rs = &rig->state;
	struct pcr_priv_caps *caps = pcr_caps(rig);
	struct pcr_priv_data *priv = (struct pcr_priv_data *) rs->priv;

	rig_debug(RIG_DEBUG_TRACE, "%s: cmd = %s\n",
		__func__, cmd);

	if (!priv->auto_update)
		serial_flush(&rs->rigport);

	pcr_send(rig, cmd);

	/* the pcr does not give ack in auto update mode */
	if (priv->auto_update)
		return RIG_OK;

	err = pcr_read_block(rig, priv->reply_buf, caps->reply_size);
	if (err < 0) {
		rig_debug(RIG_DEBUG_ERR,
			  "%s: read error, %s\n", __func__, strerror(errno));
		return err;
	}

	if (err != caps->reply_size) {
		priv->sync = 0;
		return -RIG_EPROTO;
	}

	return pcr_parse_answer(rig, &priv->reply_buf[caps->reply_offset], err);
}

/* Powers down the machine we're running on,
   as long as we're running on Bochs or QEMU. */
void
shutdown_power_off (void)
{
  const char s[] = "Shutdown";
  const char *p;

#ifdef FILESYS
  filesys_done ();
#endif

  print_stats ();

  printf ("Powering off...\n");
  serial_flush ();

  /* ACPI Shutdown sequence supported by Bochs and QEMU
     http://forum.osdev.org/viewtopic.php?t=16990  */
  outw( 0xB004, 0x0 | 0x2000 );

  /* This is a special power-off sequence supported by Bochs and
     QEMU, but not by physical hardware. */
  for (p = s; *p != '\0'; p++)
    outb (0x8900, *p);

  /* This will power off a VMware VM if "gui.exitOnCLIHLT = TRUE"
     is set in its configuration file.  (The "pintos" script does
     that automatically.)  */
  asm volatile ("cli; hlt" : : : "memory");

  /* None of those worked. */
  printf ("still running...\n");
  for (;;);
}