本文整理汇总了C++中ser_sd_transport_cmd_write函数的典型用法代码示例。如果您正苦于以下问题：C++ ser_sd_transport_cmd_write函数的具体用法？C++ ser_sd_transport_cmd_write怎么用？C++ ser_sd_transport_cmd_write使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ser_sd_transport_cmd_write函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: sd_ble_uuid_encode
uint32_t sd_ble_uuid_encode(ble_uuid_t const * const p_uuid,
uint8_t * const p_uuid_le_len,
uint8_t * const p_uuid_le)
{
uint8_t * p_buffer;
uint32_t buffer_length;
tx_buf_alloc(&p_buffer, &buffer_length);
m_output_params.ble_uuid_encode_out_params.p_uuid_le_len = p_uuid_le_len;
m_output_params.ble_uuid_encode_out_params.p_uuid_le = p_uuid_le;
uint32_t err_code = ble_uuid_encode_req_enc(p_uuid,
p_uuid_le_len,
p_uuid_le,
&(p_buffer[1]),
&buffer_length);
//@note: Should never fail.
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
uuid_encode_rsp_dec);
}示例2: sd_ble_gap_sec_params_reply
uint32_t sd_ble_gap_sec_params_reply(uint16_t conn_handle,
uint8_t sec_status,
ble_gap_sec_params_t const * p_sec_params,
ble_gap_sec_keyset_t const * p_sec_keyset)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
uint32_t sec_tab_index = 0;
uint32_t err_code = NRF_SUCCESS;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
m_output_params.gap_sec_params_reply_out_params.p_sec_keyset = p_sec_keyset;
m_output_params.gap_sec_params_reply_out_params.conn_handle = conn_handle;
// First allocate security context for serialization
if (p_sec_keyset)
{
err_code = app_ble_gap_sec_context_create(conn_handle, &sec_tab_index);
SER_ASSERT(err_code == NRF_SUCCESS, err_code);
memcpy(&(m_app_keys_table[sec_tab_index].keyset), p_sec_keyset, sizeof(ble_gap_sec_keyset_t));
}
err_code = ble_gap_sec_params_reply_req_enc(conn_handle,
sec_status,
p_sec_params,
p_sec_keyset,
&(p_buffer[1]),
&buffer_length);
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
gap_sec_params_reply_rsp_dec);
}示例3: sd_ble_gatts_value_get
uint32_t sd_ble_gatts_value_get(uint16_t handle,
uint16_t offset,
uint16_t * const p_len,
uint8_t * const p_data)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
mp_out_params[0] = p_len;
mp_out_params[1] = p_data;
const uint32_t err_code = ble_gatts_value_get_req_enc(handle,
offset,
p_len,
p_data,
&(p_buffer[1]),
&buffer_length);
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
gatts_value_get_rsp_dec);
}示例4: sd_ble_gatts_sys_attr_get
uint32_t sd_ble_gatts_sys_attr_get(uint16_t conn_handle,
uint8_t * const p_sys_attr_data,
uint16_t * const p_len,
uint32_t flags)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
mp_out_params[0] = p_sys_attr_data;
mp_out_params[1] = p_len;
const uint32_t err_code = ble_gatts_sys_attr_get_req_enc(conn_handle,
p_sys_attr_data,
p_len,
flags,
&(p_buffer[1]),
&buffer_length);
//@note: Should never fail.
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
gatts_sys_attr_get_rsp_dec);
}示例5: sd_power_system_off
uint32_t sd_power_system_off(void)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
const uint32_t err_code = power_system_off_req_enc(&(p_buffer[1]), &buffer_length);
APP_ERROR_CHECK(err_code);
ser_app_power_system_off_set();
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
NULL);
}示例6: sd_ble_gap_rssi_stop
uint32_t sd_ble_gap_rssi_stop(uint16_t conn_handle)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
const uint32_t err_code = ble_gap_rssi_stop_req_enc(conn_handle,
&(p_buffer[1]), &buffer_length);
//@note: Should never fail.
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
gap_rssi_stop_rsp_dec);
}示例7: sd_ble_gap_adv_start
uint32_t sd_ble_gap_adv_start(ble_gap_adv_params_t const * const p_adv_params)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
const uint32_t err_code = ble_gap_adv_start_req_enc(p_adv_params,
&(p_buffer[1]),
&buffer_length);
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
gap_adv_start_rsp_dec);
}示例8: sd_ble_gap_address_set
uint32_t sd_ble_gap_address_set(uint8_t addr_cycle_mode, ble_gap_addr_t const * const p_addr)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
const uint32_t err_code = ble_gap_address_set_req_enc(addr_cycle_mode,
p_addr,
&(p_buffer[1]),
&buffer_length);
//@note: Should never fail.
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
gap_address_set_rsp_dec);
}示例9: sd_ble_uuid_vs_add
uint32_t sd_ble_uuid_vs_add(ble_uuid128_t const * const p_vs_uuid, uint8_t * const p_uuid_type)
{
uint8_t * p_buffer;
uint32_t buffer_length;
tx_buf_alloc(&p_buffer, &buffer_length);
mp_out_params[0] = p_uuid_type;
const uint32_t err_code = ble_uuid_vs_add_req_enc(p_vs_uuid, p_uuid_type,
&(p_buffer[1]),
&buffer_length);
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
uuid_vs_add_rsp_dec);
}示例10: _sd_ble_gattc_attr_info_discover
uint32_t _sd_ble_gattc_attr_info_discover(uint16_t conn_handle,
ble_gattc_handle_range_t const * const p_handle_range)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
const uint32_t err_code = ble_gattc_attr_info_discover_req_enc(conn_handle,
p_handle_range,
&(p_buffer[1]),
&buffer_length);
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
gattc_attr_info_discover_rsp_dec);
}示例11: sd_ble_gatts_hvx
uint32_t sd_ble_gatts_hvx(uint16_t conn_handle, ble_gatts_hvx_params_t const * const p_hvx_params)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
mp_out_params[0] = (p_hvx_params) ? p_hvx_params->p_len : NULL;
const uint32_t err_code = ble_gatts_hvx_req_enc(conn_handle,
p_hvx_params,
&(p_buffer[1]),
&buffer_length);
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
gatts_hvx_rsp_dec);
}示例12: sd_ble_enable
uint32_t sd_ble_enable(ble_enable_params_t * p_params)
{
uint8_t * p_buffer;
uint32_t buffer_length;
tx_buf_alloc(&p_buffer, &buffer_length);
mp_out_params[0] = p_params;
const uint32_t err_code = ble_enable_req_enc(p_params,
&(p_buffer[1]),
&buffer_length);
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
enable_rsp_dec);
}示例13: sd_ble_opt_set
uint32_t sd_ble_opt_set(uint32_t opt_id, ble_opt_t const *p_opt)
{
uint8_t * p_buffer;
uint32_t buffer_length;
tx_buf_alloc(&p_buffer, &buffer_length);
const uint32_t err_code = ble_opt_set_req_enc(opt_id,
p_opt,
&(p_buffer[1]),
&buffer_length);
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
opt_set_rsp_dec);
}示例14: _sd_ble_gattc_exchange_mtu_request
uint32_t _sd_ble_gattc_exchange_mtu_request(uint16_t conn_handle,
uint16_t client_rx_mtu)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
const uint32_t err_code = ble_gattc_exchange_mtu_request_req_enc(conn_handle,
client_rx_mtu,
&(p_buffer[1]),
&buffer_length);
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
gattc_exchange_mtu_request_rsp_dec);
}示例15: sd_temp_get
uint32_t sd_temp_get(int32_t * p_temp)
{
uint8_t * p_buffer;
uint32_t buffer_length = 0;
tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length);
mp_out_param = p_temp;
const uint32_t err_code = temp_get_req_enc(p_temp,
&(p_buffer[1]),
&buffer_length);
APP_ERROR_CHECK(err_code);
//@note: Increment buffer length as internally managed packet type field must be included.
return ser_sd_transport_cmd_write(p_buffer,
(++buffer_length),
mw_temp_get_rsp_dec);
}