当前位置: 首页>>代码示例>>C++>>正文

C++ rtw_hal_set_hwreg函数代码示例

本文整理汇总了C++中rtw_hal_set_hwreg函数的典型用法代码示例。如果您正苦于以下问题：C++ rtw_hal_set_hwreg函数的具体用法？C++ rtw_hal_set_hwreg怎么用？C++ rtw_hal_set_hwreg使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了rtw_hal_set_hwreg函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: _restore_network_status

static void _restore_network_status(_adapter *padapter)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
	WLAN_BSSID_EX	*pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network));
	unsigned short	caps;
	u8	join_type;
#if 1

	//=======================================================
	// reset related register of Beacon control

	//set MSR to nolink
	Set_MSR(padapter, _HW_STATE_NOLINK_);
	// reject all data frame
	rtw_write16(padapter, REG_RXFLTMAP2,0x00);
	//reset TSF
	rtw_write8(padapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));

	// disable update TSF
	SetBcnCtrlReg(padapter, BIT(4), 0);

	//=======================================================
	rtw_joinbss_reset(padapter);
	set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
	//pmlmeinfo->assoc_AP_vendor = maxAP;

	if (padapter->registrypriv.wifi_spec) {
		// for WiFi test, follow WMM test plan spec
		rtw_write32(padapter, REG_EDCA_VO_PARAM, 0x002F431C);
		rtw_write32(padapter, REG_EDCA_VI_PARAM, 0x005E541C);
		rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x0000A525);
		rtw_write32(padapter, REG_EDCA_BK_PARAM, 0x0000A549);

                // for WiFi test, mixed mode with intel STA under bg mode throughput issue
	        if (padapter->mlmepriv.htpriv.ht_option == 0)
		     rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x00004320);

	} else {
		rtw_write32(padapter, REG_EDCA_VO_PARAM, 0x002F3217);
		rtw_write32(padapter, REG_EDCA_VI_PARAM, 0x005E4317);
		rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x00105320);
		rtw_write32(padapter, REG_EDCA_BK_PARAM, 0x0000A444);
	}

	//disable dynamic functions, such as high power, DIG
	//Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);
#endif

	rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pmlmeinfo->network.MacAddress);
	join_type = 0;
	rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type));

	Set_MSR(padapter, (pmlmeinfo->state & 0x3));

	mlmeext_joinbss_event_callback(padapter, 1);
	//restore Sequence No.
	rtw_write8(padapter,0x4dc,padapter->xmitpriv.nqos_ssn);
}
开发者ID:abgoyal，项目名称:alcatel_ot_4020D_kernel，代码行数:60，代码来源:rtl8723b_sreset.c

示例2: update_hw_ht_param

static void update_hw_ht_param(struct adapter *padapter)
{
	unsigned char		max_AMPDU_len;
	unsigned char		min_MPDU_spacing;
	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;

	DBG_88E("%s\n", __func__);

	/* handle A-MPDU parameter field */
	/*
		ampdu_params_info [1:0]:Max AMPDU Len => 0:8k , 1:16k, 2:32k, 3:64k
		ampdu_params_info [4:2]:Min MPDU Start Spacing
	*/
	max_AMPDU_len = pmlmeinfo->HT_caps.ampdu_params_info & 0x03;

	min_MPDU_spacing = (pmlmeinfo->HT_caps.ampdu_params_info & 0x1c) >> 2;

	rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_MIN_SPACE, (u8 *)(&min_MPDU_spacing));

	rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_FACTOR, (u8 *)(&max_AMPDU_len));

	/*  */
	/*  Config SM Power Save setting */
	/*  */
	pmlmeinfo->SM_PS = (le16_to_cpu(pmlmeinfo->HT_caps.cap_info) & 0x0C) >> 2;
	if (pmlmeinfo->SM_PS == WLAN_HT_CAP_SM_PS_STATIC)
		DBG_88E("%s(): WLAN_HT_CAP_SM_PS_STATIC\n", __func__);
}
开发者ID:austriancoder，项目名称:linux，代码行数:29，代码来源:rtw_ap.c

示例3: hal_init_macaddr

void hal_init_macaddr(_adapter *adapter)
{
	rtw_hal_set_hwreg(adapter, HW_VAR_MAC_ADDR, adapter->eeprompriv.mac_addr);
#ifdef  CONFIG_CONCURRENT_MODE
	if (adapter->pbuddy_adapter)
		rtw_hal_set_hwreg(adapter->pbuddy_adapter, HW_VAR_MAC_ADDR, adapter->pbuddy_adapter->eeprompriv.mac_addr);
#endif
}
开发者ID:abrakev，项目名称:RTL-8188C-8192C，代码行数:8，代码来源:hal_com.c

示例4: _restore_network_status

static void _restore_network_status(struct adapter *padapter)
{
	struct hal_data_8188e	*pHalData = GET_HAL_DATA(padapter);
	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
	struct wlan_bssid_ex	*pnetwork = (struct wlan_bssid_ex*)(&(pmlmeinfo->network));
	unsigned short	caps;
	u8	join_type;

	/*  */
	/*  reset related register of Beacon control */

	/* set MSR to nolink */
	Set_MSR(padapter, _HW_STATE_NOLINK_);
	/*  reject all data frame */
	rtw_write16(padapter, REG_RXFLTMAP2,0x00);
	/* reset TSF */
	rtw_write8(padapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));

	/*  disable update TSF */
	SetBcnCtrlReg(padapter, BIT(4), 0);

	/*  */
	rtw_joinbss_reset(padapter);
	set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);

	if (padapter->registrypriv.wifi_spec) {
		/*  for WiFi test, follow WMM test plan spec */
		rtw_write32(padapter, REG_EDCA_VO_PARAM, 0x002F431C);
		rtw_write32(padapter, REG_EDCA_VI_PARAM, 0x005E541C);
		rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x0000A525);
		rtw_write32(padapter, REG_EDCA_BK_PARAM, 0x0000A549);
		/*  for WiFi test, mixed mode with intel STA under bg mode throughput issue */
		if (padapter->mlmepriv.htpriv.ht_option == 0)
		rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x00004320);

	} else {
		rtw_write32(padapter, REG_EDCA_VO_PARAM, 0x002F3217);
		rtw_write32(padapter, REG_EDCA_VI_PARAM, 0x005E4317);
		rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x00105320);
		rtw_write32(padapter, REG_EDCA_BK_PARAM, 0x0000A444);
	}

	rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pmlmeinfo->network.MacAddress);
	join_type = 0;
	rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type));

	Set_MSR(padapter, (pmlmeinfo->state & 0x3));

	mlmeext_joinbss_event_callback(padapter, 1);
	/* restore Sequence No. */
	rtw_write8(padapter,0x4dc,padapter->xmitpriv.nqos_ssn);
}
开发者ID:simar7，项目名称:rtl8188eu，代码行数:53，代码来源:rtl8188e_sreset.c

示例5: rtw_set_ps_mode

void rtw_set_ps_mode(struct rtl_priv *rtlpriv, uint8_t ps_mode, uint8_t smart_ps, uint8_t bcn_ant_mode)
{
	struct pwrctrl_priv *pwrpriv = &rtlpriv->pwrctrlpriv;



	if (ps_mode > PM_Card_Disable) {
		return;
	}

	if (pwrpriv->pwr_mode == ps_mode) {
		if (PS_MODE_ACTIVE == ps_mode)
			return;

		if ((pwrpriv->smart_ps == smart_ps)
		   && (pwrpriv->bcn_ant_mode == bcn_ant_mode)) {
			return;
		}
	}

	//if(pwrpriv->pwr_mode == PS_MODE_ACTIVE)
	if(ps_mode == PS_MODE_ACTIVE)
	{
		{
			DBG_871X("rtw_set_ps_mode: Leave 802.11 power save\n");


			pwrpriv->pwr_mode = ps_mode;
			rtw_set_rpwm(rtlpriv, PS_STATE_S4);
			rtw_hal_set_hwreg(rtlpriv, HW_VAR_H2C_FW_PWRMODE, (uint8_t *)(&ps_mode));
			pwrpriv->fw_current_inpsmode = false;
		}
	} else 	{
		if (PS_RDY_CHECK(rtlpriv)) {
			DBG_871X("%s: Enter 802.11 power save\n", __FUNCTION__);


			pwrpriv->fw_current_inpsmode = true;
			pwrpriv->pwr_mode = ps_mode;
			pwrpriv->smart_ps = smart_ps;
			pwrpriv->bcn_ant_mode = bcn_ant_mode;
			rtw_hal_set_hwreg(rtlpriv, HW_VAR_H2C_FW_PWRMODE, (uint8_t *)(&ps_mode));

			rtw_set_rpwm(rtlpriv, PS_STATE_S2);
		}
	}


}
开发者ID:paralin，项目名称:rtl8821au-1，代码行数:49，代码来源:rtw_pwrctrl.c

示例6: rtw_set_ps_mode

void rtw_set_ps_mode(struct adapter *padapter, u8 ps_mode, u8 smart_ps, u8 bcn_ant_mode)
{
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;

	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
		 ("%s: PowerMode=%d Smart_PS=%d\n",
		  __func__, ps_mode, smart_ps));

	if (ps_mode > PM_Card_Disable) {
		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_, ("ps_mode:%d error\n", ps_mode));
		return;
	}

	if (pwrpriv->pwr_mode == ps_mode) {
		if (PS_MODE_ACTIVE == ps_mode)
			return;

		if ((pwrpriv->smart_ps == smart_ps) &&
		    (pwrpriv->bcn_ant_mode == bcn_ant_mode))
			return;
	}

	/* if (pwrpriv->pwr_mode == PS_MODE_ACTIVE) */
	if (ps_mode == PS_MODE_ACTIVE) {
		if (PS_RDY_CHECK(padapter)) {
			DBG_88E("%s: Enter 802.11 power save\n", __func__);
			pwrpriv->bFwCurrentInPSMode = true;
			pwrpriv->pwr_mode = ps_mode;
			pwrpriv->smart_ps = smart_ps;
			pwrpriv->bcn_ant_mode = bcn_ant_mode;
			rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&ps_mode));
			rtw_set_rpwm(padapter, PS_STATE_S2);
		}
	}
}
开发者ID:020gzh，项目名称:linux，代码行数:35，代码来源:rtw_pwrctrl.c

示例7: rtw_btcoex_MediaStatusNotify

void rtw_btcoex_MediaStatusNotify(PADAPTER padapter, u8 mediaStatus)
{
#ifdef DBG_CONFIG_ERROR_RESET
    if (_TRUE == rtw_hal_sreset_inprogress(padapter))
    {
        DBG_8192C(FUNC_ADPT_FMT ": [BTCoex] under reset, skip notify!\n",
                  FUNC_ADPT_ARG(padapter));
        return;
    }
#endif // DBG_CONFIG_ERROR_RESET

#ifdef CONFIG_CONCURRENT_MODE
    if ((RT_MEDIA_DISCONNECT == mediaStatus) && (padapter->pbuddy_adapter))
    {
        PADAPTER pbuddy = padapter->pbuddy_adapter;
        if (check_fwstate(&pbuddy->mlmepriv, WIFI_ASOC_STATE) == _TRUE)
            return;
    }
#endif // CONFIG_CONCURRENT_MODE

    if ((RT_MEDIA_CONNECT == mediaStatus)
            && (check_fwstate(&padapter->mlmepriv, WIFI_AP_STATE) == _TRUE))
    {
        rtw_hal_set_hwreg(padapter, HW_VAR_DL_RSVD_PAGE, NULL);
    }

    hal_btcoex_MediaStatusNotify(padapter, mediaStatus);
}
开发者ID:takitr，项目名称:linux-wetek-3.10.y-1，代码行数:28，代码来源:rtw_btcoex.c

示例8: rtw_init_pwrctrl_priv

void rtw_init_pwrctrl_priv(PADAPTER padapter)
{
	struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(padapter);

	sema_init(&pwrctrlpriv->lock, 1);
	sema_init(&pwrctrlpriv->check_32k_lock, 1);
	pwrctrlpriv->rf_pwrstate = rf_on;
	pwrctrlpriv->ips_enter_cnts =0;
	pwrctrlpriv->ips_leave_cnts =0;
	pwrctrlpriv->bips_processing = false;

	pwrctrlpriv->ips_mode = padapter->registrypriv.ips_mode;
	pwrctrlpriv->ips_mode_req = padapter->registrypriv.ips_mode;

	pwrctrlpriv->pwr_state_check_interval = RTW_PWR_STATE_CHK_INTERVAL;
	pwrctrlpriv->pwr_state_check_cnts = 0;
	pwrctrlpriv->bInternalAutoSuspend = false;
	pwrctrlpriv->bInSuspend = false;
	pwrctrlpriv->bkeepfwalive = false;

	pwrctrlpriv->LpsIdleCount = 0;
	if (padapter->registrypriv.mp_mode == 1)
		pwrctrlpriv->power_mgnt =PS_MODE_ACTIVE ;
	else
		pwrctrlpriv->power_mgnt =padapter->registrypriv.power_mgnt;/*  PS_MODE_MIN; */
	pwrctrlpriv->bLeisurePs = (PS_MODE_ACTIVE != pwrctrlpriv->power_mgnt)?true:false;

	pwrctrlpriv->bFwCurrentInPSMode = false;

	pwrctrlpriv->rpwm = 0;
	pwrctrlpriv->cpwm = PS_STATE_S4;

	pwrctrlpriv->pwr_mode = PS_MODE_ACTIVE;
	pwrctrlpriv->smart_ps = padapter->registrypriv.smart_ps;
	pwrctrlpriv->bcn_ant_mode = 0;
	pwrctrlpriv->dtim = 0;

	pwrctrlpriv->tog = 0x80;

	rtw_hal_set_hwreg(padapter, HW_VAR_SET_RPWM, (u8 *)(&pwrctrlpriv->rpwm));

	_init_workitem(&pwrctrlpriv->cpwm_event, cpwm_event_callback, NULL);

	pwrctrlpriv->brpwmtimeout = false;
	_init_workitem(&pwrctrlpriv->rpwmtimeoutwi, rpwmtimeout_workitem_callback, NULL);
	_init_timer(&pwrctrlpriv->pwr_rpwm_timer, padapter->pnetdev, pwr_rpwm_timeout_handler, padapter);

	rtw_init_timer(&pwrctrlpriv->pwr_state_check_timer, padapter, pwr_state_check_handler);

	pwrctrlpriv->wowlan_mode = false;
	pwrctrlpriv->wowlan_ap_mode = false;

#ifdef CONFIG_PNO_SUPPORT
	pwrctrlpriv->pno_inited = false;
	pwrctrlpriv->pnlo_info = NULL;
	pwrctrlpriv->pscan_info = NULL;
	pwrctrlpriv->pno_ssid_list = NULL;
	pwrctrlpriv->pno_in_resume = true;
#endif
}
开发者ID:jasonabele，项目名称:rtl8723bs，代码行数:60，代码来源:rtw_pwrctrl.c

示例9: lps_ctrl_wk_hdl

static void lps_ctrl_wk_hdl(struct adapter *padapter, u8 lps_ctrl_type)
{
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
	u8	mstatus;


	if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == true) ||
	    (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == true))
		return;

	switch (lps_ctrl_type) {
	case LPS_CTRL_SCAN:
		if (check_fwstate(pmlmepriv, _FW_LINKED) == true) {
			/* connect */
			LPS_Leave(padapter);
		}
		break;
	case LPS_CTRL_JOINBSS:
		LPS_Leave(padapter);
		break;
	case LPS_CTRL_CONNECT:
		mstatus = 1;/* connect */
		/*  Reset LPS Setting */
		padapter->pwrctrlpriv.LpsIdleCount = 0;
		rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_JOINBSSRPT, (u8 *)(&mstatus));
		break;
	case LPS_CTRL_DISCONNECT:
		mstatus = 0;/* disconnect */
		LPS_Leave(padapter);
		rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_JOINBSSRPT, (u8 *)(&mstatus));
		break;
	case LPS_CTRL_SPECIAL_PACKET:
		/* DBG_88E("LPS_CTRL_SPECIAL_PACKET\n"); */
		pwrpriv->DelayLPSLastTimeStamp = jiffies;
		LPS_Leave(padapter);
		break;
	case LPS_CTRL_LEAVE:
		LPS_Leave(padapter);
		break;
	default:
		break;
	}

}
开发者ID:020gzh，项目名称:linux，代码行数:45，代码来源:rtw_cmd.c

示例10: rtw_btcoex_MediaStatusNotify

void rtw_btcoex_MediaStatusNotify(struct adapter *padapter, u8 mediaStatus)
{
	if ((mediaStatus == RT_MEDIA_CONNECT)
		&& (check_fwstate(&padapter->mlmepriv, WIFI_AP_STATE) == true)) {
		rtw_hal_set_hwreg(padapter, HW_VAR_DL_RSVD_PAGE, NULL);
	}

	hal_btcoex_MediaStatusNotify(padapter, mediaStatus);
}
开发者ID:mkrufky，项目名称:linux，代码行数:9，代码来源:rtw_btcoex.c

示例11: sreset_restore_security_station

void sreset_restore_security_station(_adapter *padapter)
{
	u8 EntryId = 0;
	struct mlme_priv *mlmepriv = &padapter->mlmepriv;
	struct sta_priv * pstapriv = &padapter->stapriv;
	struct sta_info *psta;
	struct security_priv* psecuritypriv=&(padapter->securitypriv);
	struct mlme_ext_info	*pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;

	{
		u8 val8;

		if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_8021X) {
			val8 = 0xcc;
		#ifdef CONFIG_WAPI_SUPPORT
		} else if (padapter->wapiInfo.bWapiEnable && pmlmeinfo->auth_algo == dot11AuthAlgrthm_WAPI) {
			//Disable TxUseDefaultKey, RxUseDefaultKey, RxBroadcastUseDefaultKey.
			val8 = 0x4c;
		#endif
		} else {
			val8 = 0xcf;
		}
		rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8));
	}

	#if 0
	if (	( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP40_ ) ||
		( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP104_ ))
	{

		for(EntryId=0; EntryId<4; EntryId++)
		{
			if(EntryId == psecuritypriv->dot11PrivacyKeyIndex)
				rtw_set_key(padapter,&padapter->securitypriv, EntryId, 1);
			else
				rtw_set_key(padapter,&padapter->securitypriv, EntryId, 0);
		}

	}
	else
	#endif
	if((padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_) ||
		(padapter->securitypriv.dot11PrivacyAlgrthm == _AES_))
	{
		psta = rtw_get_stainfo(pstapriv, get_bssid(mlmepriv));
		if (psta == NULL) {
			//DEBUG_ERR( ("Set wpa_set_encryption: Obtain Sta_info fail \n"));
		}
		else
		{
			//pairwise key
			rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE);
			//group key
			rtw_set_key(padapter,&padapter->securitypriv,padapter->securitypriv.dot118021XGrpKeyid, 0);
		}
	}
}
开发者ID:GREYFOXRGR，项目名称:BPI-M3-bsp，代码行数:57，代码来源:rtw_sreset.c

示例12: rtw_ips_dev_unload

void rtw_ips_dev_unload(struct adapter *padapter)
{
	DBG_88E("====> %s...\n", __func__);

	rtw_hal_set_hwreg(padapter, HW_VAR_FIFO_CLEARN_UP, NULL);

	usb_intf_stop(padapter);

	/* s5. */
	if (!padapter->bSurpriseRemoved)
		rtw_hal_deinit(padapter);
}
开发者ID:Lyude，项目名称:linux，代码行数:12，代码来源:os_intfs.c

示例13: rtw_set_rpwm

/*
 *
 * Parameters
 *	padapter
 *	pslv			power state level, only could be PS_STATE_S0 ~ PS_STATE_S4
 *
 */
void rtw_set_rpwm(struct adapter *padapter, u8 pslv)
{
	u8	rpwm;
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;

	pslv = PS_STATE(pslv);

	if (pwrpriv->btcoex_rfon) {
		if (pslv < PS_STATE_S4)
			pslv = PS_STATE_S3;
	}

	if ((pwrpriv->rpwm == pslv)) {
		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
			 ("%s: Already set rpwm[0x%02X], new=0x%02X!\n", __func__, pwrpriv->rpwm, pslv));
		return;
	}

	if ((padapter->bSurpriseRemoved) ||
	    (!padapter->hw_init_completed)) {
		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
			 ("%s: SurpriseRemoved(%d) hw_init_completed(%d)\n",
			 __func__, padapter->bSurpriseRemoved, padapter->hw_init_completed));

		pwrpriv->cpwm = PS_STATE_S4;

		return;
	}

	if (padapter->bDriverStopped) {
		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
			 ("%s: change power state(0x%02X) when DriverStopped\n", __func__, pslv));

		if (pslv < PS_STATE_S2) {
			RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
				 ("%s: Reject to enter PS_STATE(0x%02X) lower than S2 when DriverStopped!!\n", __func__, pslv));
			return;
		}
	}

	rpwm = pslv | pwrpriv->tog;
	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
		 ("rtw_set_rpwm: rpwm=0x%02x cpwm=0x%02x\n", rpwm, pwrpriv->cpwm));

	pwrpriv->rpwm = pslv;

	rtw_hal_set_hwreg(padapter, HW_VAR_SET_RPWM, (u8 *)(&rpwm));

	pwrpriv->tog += 0x80;
	pwrpriv->cpwm = pslv;
}
开发者ID:020gzh，项目名称:linux，代码行数:58，代码来源:rtw_pwrctrl.c

示例14: rtw_hal_macid_sleep

s32 rtw_hal_macid_sleep(PADAPTER padapter, u32 macid)
{
	u8 support;


	support = false;
	rtw_hal_get_def_var(padapter, HAL_DEF_MACID_SLEEP, &support);
	if (false == support)
		return _FAIL;

	rtw_hal_set_hwreg(padapter, HW_VAR_MACID_SLEEP, (u8*)&macid);

	return _SUCCESS;
}
开发者ID:jhartma，项目名称:rtl8723bs，代码行数:14，代码来源:hal_intf.c

示例15: rtw_hal_macid_wakeup

s32 rtw_hal_macid_wakeup(PADAPTER padapter, u32 macid)
{
	u8 support;


	support = _FALSE;
	rtw_hal_get_def_var(padapter, HAL_DEF_MACID_SLEEP, &support);
	if (_FALSE == support)
		return _FAIL;

	rtw_hal_set_hwreg(padapter, HW_VAR_MACID_WAKEUP, (u8*)&macid);

	return _SUCCESS;
}
开发者ID:austinmarton，项目名称:rtl8812au_linux，代码行数:14，代码来源:hal_intf.c


注：本文中的rtw_hal_set_hwreg函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。