当前位置: 首页>>代码示例>>C++>>正文

C++ rfbi_write_reg函数代码示例

本文整理汇总了C++中rfbi_write_reg函数的典型用法代码示例。如果您正苦于以下问题：C++ rfbi_write_reg函数的具体用法？C++ rfbi_write_reg怎么用？C++ rfbi_write_reg使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了rfbi_write_reg函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: omap_rfbi_write_data

void omap_rfbi_write_data(const void *buf, u32 len)
{
	rfbi_enable_clocks(1);
	switch (rfbi.parallelmode) {
	case OMAP_DSS_RFBI_PARALLELMODE_8:
	{
		const u8 *b = buf;
		for (; len; len--)
			rfbi_write_reg(RFBI_PARAM, *b++);
		break;
	}

	case OMAP_DSS_RFBI_PARALLELMODE_16:
	{
		const u16 *w = buf;
		BUG_ON(len & 1);
		for (; len; len -= 2)
			rfbi_write_reg(RFBI_PARAM, *w++);
		break;
	}

	case OMAP_DSS_RFBI_PARALLELMODE_9:
	case OMAP_DSS_RFBI_PARALLELMODE_12:
	default:
		BUG();

	}
	rfbi_enable_clocks(0);
}
开发者ID:AdiPat，项目名称:android_kernel_tegra_n1，代码行数:29，代码来源:rfbi.c

示例2: rfbi_enable_config

static void rfbi_enable_config(int enable1, int enable2)
{
	u32 l;
	int cs = 0;

	if (enable1)
		cs |= 1<<0;
	if (enable2)
		cs |= 1<<1;

	rfbi_enable_clocks(1);

	l = rfbi_read_reg(RFBI_CONTROL);

	l = FLD_MOD(l, cs, 3, 2);
	l = FLD_MOD(l, 0, 1, 1);

	rfbi_write_reg(RFBI_CONTROL, l);


	l = rfbi_read_reg(RFBI_CONFIG(0));
	l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */
	/*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */
	/*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */

	l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */
	l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */
	l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */

	l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0);
	rfbi_write_reg(RFBI_CONFIG(0), l);

	rfbi_enable_clocks(0);
}
开发者ID:AdiPat，项目名称:android_kernel_tegra_n1，代码行数:34，代码来源:rfbi.c

示例3: omap_rfbi_read_data

void omap_rfbi_read_data(void *buf, u32 len)
{
	rfbi_enable_clocks(1);
	switch (rfbi.parallelmode) {
	case OMAP_DSS_RFBI_PARALLELMODE_8:
	{
		u8 *b = buf;
		for (; len; len--) {
			rfbi_write_reg(RFBI_READ, 0);
			*b++ = rfbi_read_reg(RFBI_READ);
		}
		break;
	}

	case OMAP_DSS_RFBI_PARALLELMODE_16:
	{
		u16 *w = buf;
		BUG_ON(len & ~1);
		for (; len; len -= 2) {
			rfbi_write_reg(RFBI_READ, 0);
			*w++ = rfbi_read_reg(RFBI_READ);
		}
		break;
	}

	case OMAP_DSS_RFBI_PARALLELMODE_9:
	case OMAP_DSS_RFBI_PARALLELMODE_12:
	default:
		BUG();
	}
	rfbi_enable_clocks(0);
}
开发者ID:AdiPat，项目名称:android_kernel_tegra_n1，代码行数:32，代码来源:rfbi.c

示例4: rfbi_transfer_area

static int rfbi_transfer_area(struct omap_dss_device *dssdev,
		void (*callback)(void *data), void *data)
{
	u32 l;
	int r;
	struct omap_overlay_manager *mgr = rfbi.output.manager;
	u16 width = rfbi.timings.x_res;
	u16 height = rfbi.timings.y_res;

	/*BUG_ON(callback == 0);*/
	BUG_ON(rfbi.framedone_callback != NULL);

	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);

	dss_mgr_set_timings(mgr, &rfbi.timings);

	r = dss_mgr_enable(mgr);
	if (r)
		return r;

	rfbi.framedone_callback = callback;
	rfbi.framedone_callback_data = data;

	rfbi_write_reg(RFBI_PIXEL_CNT, width * height);

	l = rfbi_read_reg(RFBI_CONTROL);
	l = FLD_MOD(l, 1, 0, 0); /* enable */
	if (!rfbi.te_enabled)
		l = FLD_MOD(l, 1, 4, 4); /* ITE */

	rfbi_write_reg(RFBI_CONTROL, l);

	return 0;
}
开发者ID:020gzh，项目名称:linux，代码行数:34，代码来源:rfbi.c

示例5: rfbi_write_command

static void rfbi_write_command(const void *buf, u32 len)
{
	switch (rfbi.parallelmode) {
	case OMAP_DSS_RFBI_PARALLELMODE_8:
	{
		const u8 *b = buf;
		for (; len; len--)
			rfbi_write_reg(RFBI_CMD, *b++);
		break;
	}

	case OMAP_DSS_RFBI_PARALLELMODE_16:
	{
		const u16 *w = buf;
		BUG_ON(len & 1);
		for (; len; len -= 2)
			rfbi_write_reg(RFBI_CMD, *w++);
		break;
	}

	case OMAP_DSS_RFBI_PARALLELMODE_9:
	case OMAP_DSS_RFBI_PARALLELMODE_12:
	default:
		BUG();
	}
}
开发者ID:020gzh，项目名称:linux，代码行数:26，代码来源:rfbi.c

示例6: rfbi_transfer_area

static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
		u16 height, void (*callback)(void *data), void *data)
{
	u32 l;

	/*BUG_ON(callback == 0);*/
	BUG_ON(rfbi.framedone_callback != NULL);

	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);

	dispc_mgr_set_lcd_size(dssdev->manager->id, width, height);

	dispc_mgr_enable(dssdev->manager->id, true);

	rfbi.framedone_callback = callback;
	rfbi.framedone_callback_data = data;

	rfbi_write_reg(RFBI_PIXEL_CNT, width * height);

	l = rfbi_read_reg(RFBI_CONTROL);
	l = FLD_MOD(l, 1, 0, 0); /* enable */
	if (!rfbi.te_enabled)
		l = FLD_MOD(l, 1, 4, 4); /* ITE */

	rfbi_write_reg(RFBI_CONTROL, l);
}
开发者ID:454053205，项目名称:linux，代码行数:26，代码来源:rfbi.c

示例7: rfbi_transfer_area

static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
                u16 height, void (*callback)(void *data), void *data)
{
        u32 l;

        BUG_ON(callback == 0);

//	printk(KERN_INFO "rfbi_transfer_area %dx%d\n", width, height);

	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);

//        dispc_disable_sidle();

        dss_start_update(dssdev);

        rfbi.framedone_callback = callback;
        rfbi.framedone_callback_data = data;

        rfbi_write_reg(RFBI_PIXEL_CNT, width * height);

        l = rfbi_read_reg(RFBI_CONTROL);
        l = FLD_MOD(l, 1, 0, 0); // enable
        l = FLD_MOD(l, 0, 4, 4); // ITE
        rfbi_write_reg(RFBI_CONTROL, l);
        l = rfbi_read_reg(RFBI_CONTROL);
        if (!rfbi.te_enabled)
                l = FLD_MOD(l, 1, 4, 4); // ITE

        rfbi_write_reg(RFBI_CONTROL, l);
}
开发者ID:ReconInstruments，项目名称:jet_kernel，代码行数:30，代码来源:rfbi.c

示例8: rfbi_transfer_area

void rfbi_transfer_area(u16 width, u16 height,
			     void (callback)(void *data), void *data)
{
	u32 l;

	/*BUG_ON(callback == 0);*/
	BUG_ON(rfbi.framedone_callback != NULL);

	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);

	dispc_set_lcd_size(width, height);

	dispc_enable_channel(OMAP_DSS_CHANNEL_LCD, true);

	rfbi.framedone_callback = callback;
	rfbi.framedone_callback_data = data;

	rfbi_enable_clocks(1);

	rfbi_write_reg(RFBI_PIXEL_CNT, width * height);

	l = rfbi_read_reg(RFBI_CONTROL);
	l = FLD_MOD(l, 1, 0, 0); /* enable */
	if (!rfbi.te_enabled)
		l = FLD_MOD(l, 1, 4, 4); /* ITE */

	rfbi_write_reg(RFBI_CONTROL, l);
}
开发者ID:AdiPat，项目名称:android_kernel_tegra_n1，代码行数:28，代码来源:rfbi.c

示例9: rfbi_init

static int rfbi_init(struct omapfb_device *fbdev)
{
	u32 l;
	int r;

	rfbi.fbdev = fbdev;
	rfbi.base = ioremap(RFBI_BASE, SZ_1K);
	if (!rfbi.base) {
		dev_err(fbdev->dev, "can't ioremap RFBI\n");
		return -ENOMEM;
	}

	if ((r = rfbi_get_clocks()) < 0)
		return r;
	rfbi_enable_clocks(1);

	rfbi.l4_khz = clk_get_rate(rfbi.dss_ick) / 1000;

	/* Reset */
	rfbi_write_reg(RFBI_SYSCONFIG, 1 << 1);
	while (!(rfbi_read_reg(RFBI_SYSSTATUS) & (1 << 0)));

	l = rfbi_read_reg(RFBI_SYSCONFIG);
	/* Enable autoidle and smart-idle */
	l |= (1 << 0) | (2 << 3);
	rfbi_write_reg(RFBI_SYSCONFIG, l);

	/* 16-bit interface, ITE trigger mode, 16-bit data */
	l = (0x03 << 0) | (0x00 << 2) | (0x01 << 5) | (0x02 << 7);
	l |= (0 << 9) | (1 << 20) | (1 << 21);
	rfbi_write_reg(RFBI_CONFIG0, l);

	rfbi_write_reg(RFBI_DATA_CYCLE1_0, 0x00000010);

	l = rfbi_read_reg(RFBI_CONTROL);
	/* Select CS0, clear bypass mode */
	l = (0x01 << 2);
	rfbi_write_reg(RFBI_CONTROL, l);

	r = omap_dispc_request_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback,
				   NULL);
	if (r < 0) {
		dev_err(fbdev->dev, "can't get DISPC irq\n");
		rfbi_enable_clocks(0);
		return r;
	}

	l = rfbi_read_reg(RFBI_REVISION);
	pr_info("omapfb: RFBI version %d.%d initialized\n",
		(l >> 4) & 0x0f, l & 0x0f);

	rfbi_enable_clocks(0);

	return 0;
}
开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:55，代码来源:rfbi.c

示例10: rfbi_write_data

static void rfbi_write_data(const void *buf, unsigned int len)
{
	rfbi_enable_clocks(1);
	if (rfbi.bits_per_cycle == 16) {
		const u16 *w = buf;
		BUG_ON(len & 1);
		for (; len; len -= 2)
			rfbi_write_reg(RFBI_PARAM, *w++);
	} else {
		const u8 *b = buf;
		BUG_ON(rfbi.bits_per_cycle != 8);
		for (; len; len--)
			rfbi_write_reg(RFBI_PARAM, *b++);
	}
	rfbi_enable_clocks(0);
}
开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:16，代码来源:rfbi.c

示例11: _stop_transfer

static inline void _stop_transfer(void)
{
	u32 w;

	w = rfbi_read_reg(RFBI_CONTROL);
	rfbi_write_reg(RFBI_CONTROL, w & ~(1 << 0));
	rfbi_enable_clocks(0);
}
开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:8，代码来源:rfbi.c

示例12: rfbi_setup_tearsync

static int rfbi_setup_tearsync(unsigned pin_cnt,
			       unsigned hs_pulse_time, unsigned vs_pulse_time,
			       int hs_pol_inv, int vs_pol_inv, int extif_div)
{
	int hs, vs;
	int min;
	u32 l;

	if (pin_cnt != 1 && pin_cnt != 2)
		return -EINVAL;

	hs = ps_to_rfbi_ticks(hs_pulse_time, 1);
	vs = ps_to_rfbi_ticks(vs_pulse_time, 1);
	if (hs < 2)
		return -EDOM;
	if (pin_cnt == 2)
		min = 2;
	else
		min = 4;
	if (vs < min)
		return -EDOM;
	if (vs == hs)
		return -EINVAL;
	rfbi.tearsync_pin_cnt = pin_cnt;
	dev_dbg(rfbi.fbdev->dev,
		"setup_tearsync: pins %d hs %d vs %d hs_inv %d vs_inv %d\n",
		pin_cnt, hs, vs, hs_pol_inv, vs_pol_inv);

	rfbi_enable_clocks(1);
	rfbi_write_reg(RFBI_HSYNC_WIDTH, hs);
	rfbi_write_reg(RFBI_VSYNC_WIDTH, vs);

	l = rfbi_read_reg(RFBI_CONFIG0);
	if (hs_pol_inv)
		l &= ~(1 << 21);
	else
		l |= 1 << 21;
	if (vs_pol_inv)
		l &= ~(1 << 20);
	else
		l |= 1 << 20;
	rfbi_enable_clocks(0);

	return 0;
}
开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:45，代码来源:rfbi.c

示例13: rfbi_set_timings

static void rfbi_set_timings(const struct extif_timings *t)
{
	u32 l;

	BUG_ON(!t->converted);

	rfbi_enable_clocks(1);
	rfbi_write_reg(RFBI_ONOFF_TIME0, t->tim[0]);
	rfbi_write_reg(RFBI_CYCLE_TIME0, t->tim[1]);

	l = rfbi_read_reg(RFBI_CONFIG0);
	l &= ~(1 << 4);
	l |= (t->tim[2] ? 1 : 0) << 4;
	rfbi_write_reg(RFBI_CONFIG0, l);

	rfbi_print_timings();
	rfbi_enable_clocks(0);
}
开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:18，代码来源:rfbi.c

示例14: rfbi_read_data

static void rfbi_read_data(void *buf, unsigned int len)
{
	rfbi_enable_clocks(1);
	if (rfbi.bits_per_cycle == 16) {
		u16 *w = buf;
		BUG_ON(len & ~1);
		for (; len; len -= 2) {
			rfbi_write_reg(RFBI_READ, 0);
			*w++ = rfbi_read_reg(RFBI_READ);
		}
	} else {
		u8 *b = buf;
		BUG_ON(rfbi.bits_per_cycle != 8);
		for (; len; len--) {
			rfbi_write_reg(RFBI_READ, 0);
			*b++ = rfbi_read_reg(RFBI_READ);
		}
	}
	rfbi_enable_clocks(0);
}
开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:20，代码来源:rfbi.c

示例15: rfbi_enable_te

/* xxx FIX module selection missing */
static int rfbi_enable_te(bool enable, unsigned line)
{
	u32 l;

	DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode);
	if (line > (1 << 11) - 1)
		return -EINVAL;

	l = rfbi_read_reg(RFBI_CONFIG(0));
	l &= ~(0x3 << 2);
	if (enable) {
		rfbi.te_enabled = 1;
		l |= rfbi.te_mode << 2;
	} else
		rfbi.te_enabled = 0;
	rfbi_write_reg(RFBI_CONFIG(0), l);
	rfbi_write_reg(RFBI_LINE_NUMBER, line);

	return 0;
}
开发者ID:020gzh，项目名称:linux，代码行数:21，代码来源:rfbi.c


注：本文中的rfbi_write_reg函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。