C++ rcc_wait_for_osc_ready函数代码示例

void rcc_clock_setup_hsi(const clock_scale_t *clock)
{
	/* Enable internal high-speed oscillator. */
	rcc_osc_on(HSI);
	rcc_wait_for_osc_ready(HSI);
	/* Select HSI as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_HSI); /* XXX: se cayo */
	rcc_wait_for_sysclk_status(HSI);

	rcc_osc_off(PLL);
	rcc_wait_for_osc_not_ready(PLL);
	rcc_set_pll_source(clock->pllsrc);
	rcc_set_main_pll_hsi(clock->pll);
	/* Enable PLL oscillator and wait for it to stabilize. */
	rcc_osc_on(PLL);
	rcc_wait_for_osc_ready(PLL);
	/*
	 * Set prescalers for AHB, ADC, ABP1, ABP2.
	 * Do this before touching the PLL (TODO: why?).
	 */
	rcc_set_hpre(clock->hpre);
	rcc_set_ppre2(clock->ppre2);
	rcc_set_ppre1(clock->ppre1);
	/* Configure flash settings. */
	flash_set_ws(clock->flash_config);
	/* Select PLL as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_PLL); /* XXX: se cayo */
	/* Wait for PLL clock to be selected. */
	rcc_wait_for_sysclk_status(PLL);

	/* Set the peripheral clock frequencies used. */
	rcc_ppre1_frequency = clock->apb1_frequency;
	rcc_ppre2_frequency = clock->apb2_frequency;
}

static inline void rcc_clock_setup_hse(const my_clock_scale_t *clock)
{
    /* Enable internal high-speed oscillator. */
    rcc_osc_on(HSE);
    rcc_wait_for_osc_ready(HSE);
    /* Select HSE as SYSCLK source. */
    rcc_set_sysclk_source(RCC_CFGR_SW_HSE);
    rcc_wait_for_sysclk_status(HSE);

    rcc_osc_off(PLL);
    rcc_wait_for_osc_not_ready(PLL);
    rcc_set_pll_source(clock->pllsrc);
    rcc_set_main_pll_hse(clock->pll);
    RCC_CFGR2 = (clock->pllpre << RCC_CFGR2_PREDIV_SHIFT);
    /* Enable PLL oscillator and wait for it to stabilize. */
    rcc_osc_on(PLL);
    rcc_wait_for_osc_ready(PLL);

    rcc_set_hpre(clock->hpre);
    rcc_set_ppre2(clock->ppre2);
    rcc_set_ppre1(clock->ppre1);
    /* Configure flash settings. */
    flash_set_ws(clock->flash_config);
    /* Select PLL as SYSCLK source. */
    rcc_set_sysclk_source(RCC_CFGR_SW_PLL);
    /* Wait for PLL clock to be selected. */
    rcc_wait_for_sysclk_status(PLL);

    /* Set the peripheral clock frequencies used. */
    rcc_apb1_frequency = clock->apb1_frequency;
    rcc_apb2_frequency = clock->apb2_frequency;
}

static void clk_tree_setup(void)
{
	/* cf. rcc_clock_setup_in_hsi_out_48mhz */
	rcc_osc_on(RCC_HSI);
	rcc_wait_for_osc_ready(RCC_HSI);
	rcc_set_sysclk_source(RCC_HSI);
	rcc_osc_on(RCC_HSE);
	rcc_wait_for_osc_ready(RCC_HSE);
	rcc_osc_off(RCC_PLL);
	rcc_wait_for_osc_not_ready(RCC_PLL);
	flash_set_ws(FLASH_ACR_LATENCY_024_048MHZ);
#ifdef NUCLEO
	rcc_set_pll_multiplication_factor(RCC_CFGR_PLLMUL_MUL6);
#else
	/* 16MHz * 3 = 48MHz */
	rcc_set_pll_multiplication_factor(RCC_CFGR_PLLMUL_MUL3);
#endif
	rcc_set_pll_source(RCC_HSE);
	rcc_osc_on(RCC_PLL);
	rcc_wait_for_osc_ready(RCC_PLL);
	rcc_set_sysclk_source(RCC_PLL);
	rcc_set_hpre(RCC_CFGR_HPRE_NODIV);
	rcc_set_ppre(RCC_CFGR_PPRE_NODIV);
	rcc_apb1_frequency = 48000000UL;
	rcc_ahb_frequency = 48000000UL;
	rcc_set_usbclk_source(RCC_PLL);
}

void rcc_clock_setup_in_hse_8mhz_out_72mhz(void)
{
	/* Enable internal high-speed oscillator. */
	rcc_osc_on(RCC_HSI);
	rcc_wait_for_osc_ready(RCC_HSI);

	/* Select HSI as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_HSICLK);

	/* Enable external high-speed oscillator 8MHz. */
	rcc_osc_on(RCC_HSE);
	rcc_wait_for_osc_ready(RCC_HSE);
	rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_HSECLK);

	/*
	 * Set prescalers for AHB, ADC, ABP1, ABP2.
	 * Do this before touching the PLL (TODO: why?).
	 */
	rcc_set_hpre(RCC_CFGR_HPRE_SYSCLK_NODIV);    /* Set. 72MHz Max. 72MHz */
	rcc_set_adcpre(RCC_CFGR_ADCPRE_PCLK2_DIV8);  /* Set.  9MHz Max. 14MHz */
	rcc_set_ppre1(RCC_CFGR_PPRE1_HCLK_DIV2);     /* Set. 36MHz Max. 36MHz */
	rcc_set_ppre2(RCC_CFGR_PPRE2_HCLK_NODIV);    /* Set. 72MHz Max. 72MHz */

	/*
	 * Sysclk runs with 72MHz -> 2 waitstates.
	 * 0WS from 0-24MHz
	 * 1WS from 24-48MHz
	 * 2WS from 48-72MHz
	 */
	flash_set_ws(FLASH_ACR_LATENCY_2WS);

	/*
	 * Set the PLL multiplication factor to 9.
	 * 8MHz (external) * 9 (multiplier) = 72MHz
	 */
	rcc_set_pll_multiplication_factor(RCC_CFGR_PLLMUL_PLL_CLK_MUL9);

	/* Select HSE as PLL source. */
	rcc_set_pll_source(RCC_CFGR_PLLSRC_HSE_CLK);

	/*
	 * External frequency undivided before entering PLL
	 * (only valid/needed for HSE).
	 */
	rcc_set_pllxtpre(RCC_CFGR_PLLXTPRE_HSE_CLK);

	/* Enable PLL oscillator and wait for it to stabilize. */
	rcc_osc_on(RCC_PLL);
	rcc_wait_for_osc_ready(RCC_PLL);

	/* Select PLL as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_PLLCLK);

	/* Set the peripheral clock frequencies used */
	rcc_ahb_frequency = 72000000;
	rcc_apb1_frequency = 36000000;
	rcc_apb2_frequency = 72000000;
}

static void rcc_clock_setup_in_hse_12mhz_out_120mhz(void) {
  /* Enable internal high-speed oscillator. */
  rcc_osc_on(RCC_HSI);
  rcc_wait_for_osc_ready(RCC_HSI);

  /* Select HSI as SYSCLK source. */
  rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_HSICLK);

  /* Enable external high-speed oscillator 12MHz. */
  rcc_osc_on(RCC_HSE);
  rcc_wait_for_osc_ready(RCC_HSE);
  rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_HSECLK);

  /*
   * Set prescalers for AHB, ADC, ABP1, ABP2.
   * Do this before touching the PLL
   */
  rcc_set_hpre(RCC_CFGR_HPRE_SYSCLK_NODIV);      /* Set. 120MHz Max. 108MHz */
  RCC_CFGR = (RCC_CFGR & ~RCC_CFGR_ADCPRE) | RCC_GCFGR_ADCPS_DIV12; /* ADC Set. 10MHz  Max. 14MHz  */
  rcc_set_ppre1(RCC_CFGR_PPRE1_HCLK_DIV2);       /* Set. 60MHz  Max. 54MHz  */
  rcc_set_ppre2(RCC_CFGR_PPRE2_HCLK_NODIV);      /* Set. 120MHz Max. 108MHz */
  RCC_CFGR |= RCC_GCFGR_USBPS_Div2_5;            /* USB Set. 48MHz  Max. 48MHz  */

  /* GD32 has 0-wait-state flash, do not touch anything! */

  /*
   * Set the PLL multiplication factor to 10.
   * 12MHz (external) * 10 (multiplier) = 120MHz
   */
  rcc_set_pll_multiplication_factor(RCC_CFGR_PLLMUL_PLL_CLK_MUL10);

  /* Select HSE as PLL source. */
  rcc_set_pll_source(RCC_CFGR_PLLSRC_HSE_CLK);

  /*
   * External frequency undivided before entering PLL
   * (only valid/needed for HSE).
   */
  rcc_set_pllxtpre(RCC_CFGR_PLLXTPRE_HSE_CLK);

  /* Enable PLL oscillator and wait for it to stabilize. */
  rcc_osc_on(RCC_PLL);
  rcc_wait_for_osc_ready(RCC_PLL);

  /* Select PLL as SYSCLK source. */
  rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_PLLCLK);

  /* Set the peripheral clock frequencies used */
  rcc_ahb_frequency  = 120000000;
  rcc_apb1_frequency = 60000000;
  rcc_apb2_frequency = 120000000;
}

void rcc_clock_setup_in_hse_25mhz_out_72mhz(void)
{
	/* Enable external high-speed oscillator 25MHz. */
	rcc_osc_on(RCC_HSE);
	rcc_wait_for_osc_ready(RCC_HSE);
	rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_HSECLK);

	/*
	 * Sysclk runs with 72MHz -> 2 waitstates.
	 * 0WS from 0-24MHz
	 * 1WS from 24-48MHz
	 * 2WS from 48-72MHz
	 */
	flash_set_ws(FLASH_ACR_LATENCY_2WS);

	/*
	 * Set prescalers for AHB, ADC, ABP1, ABP2.
	 * Do this before touching the PLL (TODO: why?).
	 */
	rcc_set_hpre(RCC_CFGR_HPRE_SYSCLK_NODIV);    /* Set. 72MHz Max. 72MHz */
	rcc_set_adcpre(RCC_CFGR_ADCPRE_PCLK2_DIV6);  /* Set. 12MHz Max. 14MHz */
	rcc_set_ppre1(RCC_CFGR_PPRE1_HCLK_DIV2);     /* Set. 36MHz Max. 36MHz */
	rcc_set_ppre2(RCC_CFGR_PPRE2_HCLK_NODIV);    /* Set. 72MHz Max. 72MHz */

	/* Set pll2 prediv and multiplier */
	rcc_set_prediv2(RCC_CFGR2_PREDIV2_DIV5);
	rcc_set_pll2_multiplication_factor(RCC_CFGR2_PLL2MUL_PLL2_CLK_MUL8);

	/* Enable PLL2 oscillator and wait for it to stabilize */
	rcc_osc_on(RCC_PLL2);
	rcc_wait_for_osc_ready(RCC_PLL2);

	/* Set pll1 prediv/multiplier, prediv1 src, and usb predivider */
	rcc_set_pllxtpre(RCC_CFGR_PLLXTPRE_HSE_CLK);
	rcc_set_prediv1_source(RCC_CFGR2_PREDIV1SRC_PLL2_CLK);
	rcc_set_prediv1(RCC_CFGR2_PREDIV_DIV5);
	rcc_set_pll_multiplication_factor(RCC_CFGR_PLLMUL_PLL_CLK_MUL9);
	rcc_set_pll_source(RCC_CFGR_PLLSRC_PREDIV1_CLK);
	rcc_set_usbpre(RCC_CFGR_USBPRE_PLL_VCO_CLK_DIV3);

	/* enable PLL1 and wait for it to stabilize */
	rcc_osc_on(RCC_PLL);
	rcc_wait_for_osc_ready(RCC_PLL);

	/* Select PLL as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_PLLCLK);

	/* Set the peripheral clock frequencies used */
	rcc_ahb_frequency = 72000000;
	rcc_apb1_frequency = 36000000;
	rcc_apb2_frequency = 72000000;
}

void clocksource_hse_in_8_out_48(void) {
    // see
    // https://www.mikrocontroller.net/attachment/322047/Clock_Control.png
    // or RM00091 p. 98

    // enable internal high-speed oscillator
    rcc_osc_on(RCC_HSI);
    rcc_wait_for_osc_ready(RCC_HSI);

    // Select HSI as SYSCLK source.
    rcc_set_sysclk_source(RCC_CFGR_SW_HSI);

    // Enable external high-speed oscillator 8MHz
    rcc_osc_on(RCC_HSE);
    rcc_wait_for_osc_ready(RCC_HSE);
    rcc_set_sysclk_source(RCC_CFGR_SW_HSE);

    // set prescalers for AHB, ADC, ABP1, ABP2.
    // Do this before touching the PLL
    rcc_set_hpre(RCC_CFGR_HPRE_NODIV);      // 48Mhz (max 72)
    rcc_set_ppre(RCC_CFGR_PPRE_DIV2);       // 24Mhz (max 36)

    // sysclk runs with 48MHz -> 1 waitstates.
    // * 0WS from 0-24MHz
    // * 1WS from 24-48MHz
    // * 2WS from 48-72MHz
    flash_set_ws(FLASH_ACR_LATENCY_1WS);

    // set the PLL multiplication factor to 6
    // pll source is hse
    RCC_CFGR |= RCC_CFGR_PLLSRC;
    // pll prediv = 1
    rcc_set_prediv(RCC_CFGR2_PREDIV_NODIV);
    // 8MHz (external) * 6 (multiplier) = 48MHz
    rcc_set_pll_multiplication_factor(RCC_CFGR_PLLMUL_MUL6);

    // enable PLL oscillator and wait for it to stabilize.
    rcc_osc_on(RCC_PLL);
    rcc_wait_for_osc_ready(RCC_PLL);

    // select PLL as SYSCLK source.
    rcc_set_sysclk_source(RCC_PLL);

    // set the peripheral clock frequencies used */
    rcc_ahb_frequency  = 48000000;
    rcc_apb1_frequency = 24000000;

    // When PPRE is set to something != NODIV
    // TIM input clock is apb clkspeed*2 (see RM00091 p98)
    rcc_timer_frequency = 2*rcc_apb1_frequency;
}

int main(void)
{

	/* Enable HSE */
	rcc_osc_on(RCC_HSE);
	rcc_wait_for_osc_ready(RCC_HSE);

	/* setup PLL */
	// 8Mhz *8/2 -> 32MHz
	rcc_set_pll_source(RCC_HSE);
	rcc_set_pll_multiplier(RCC_CFGR_PLLMUL_MUL8);
	rcc_set_pll_divider(RCC_CFGR_PLLDIV_DIV2);
	rcc_osc_on(RCC_PLL);
	rcc_wait_for_osc_ready(RCC_PLL);

	/* switch to PLL */
	rcc_set_sysclk_source(RCC_PLL);

	/* setup AHB/APBx */
	rcc_set_hpre(RCC_CFGR_HPRE_NODIV);
	rcc_set_ppre1(RCC_CFGR_PPRE1_NODIV);
	rcc_set_ppre2(RCC_CFGR_PPRE2_NODIV);

	gpio_setup();

	systick_setup(2);

  /* init switch */
  gpio_mode_setup(GPIOA, GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, GPIO12);
  gpio_mode_setup(GPIOA, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO11);
  gpio_clear(GPIOA, GPIO11);
  /* get value */
  gpio_get(GPIOA, GPIO12);

	while (1) {
		/*
		delay();
		gpio_toggle(LED_GREEN_PORT, LED_GREEN_PIN);
		delay_short();
		gpio_toggle(LED_GREEN_PORT, LED_GREEN_PIN);
		delay_short();
		gpio_toggle(LED_GREEN_PORT, LED_GREEN_PIN);
		delay_short();
		gpio_toggle(LED_GREEN_PORT, LED_GREEN_PIN);
		delay_short();
*/
	}

	return 0;
}

void rcc_clock_setup_in_hsi_out_48mhz(void)
{
	/* Enable internal high-speed oscillator. */
	rcc_osc_on(RCC_HSI);
	rcc_wait_for_osc_ready(RCC_HSI);

	/* Select HSI as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_HSICLK);

	/*
	 * Set prescalers for AHB, ADC, ABP1, ABP2.
	 * Do this before touching the PLL (TODO: why?).
	 */
	rcc_set_hpre(RCC_CFGR_HPRE_SYSCLK_NODIV);	/*Set.48MHz Max.72MHz */
	rcc_set_adcpre(RCC_CFGR_ADCPRE_PCLK2_DIV8);	/*Set. 6MHz Max.14MHz */
	rcc_set_ppre1(RCC_CFGR_PPRE1_HCLK_DIV2);	/*Set.24MHz Max.36MHz */
	rcc_set_ppre2(RCC_CFGR_PPRE2_HCLK_NODIV);	/*Set.48MHz Max.72MHz */
	rcc_set_usbpre(RCC_CFGR_USBPRE_PLL_CLK_NODIV);  /*Set.48MHz Max.48MHz */

	/*
	 * Sysclk runs with 48MHz -> 1 waitstates.
	 * 0WS from 0-24MHz
	 * 1WS from 24-48MHz
	 * 2WS from 48-72MHz
	 */
	flash_set_ws(FLASH_ACR_LATENCY_1WS);

	/*
	 * Set the PLL multiplication factor to 12.
	 * 8MHz (internal) * 12 (multiplier) / 2 (PLLSRC_HSI_CLK_DIV2) = 48MHz
	 */
	rcc_set_pll_multiplication_factor(RCC_CFGR_PLLMUL_PLL_CLK_MUL12);

	/* Select HSI/2 as PLL source. */
	rcc_set_pll_source(RCC_CFGR_PLLSRC_HSI_CLK_DIV2);

	/* Enable PLL oscillator and wait for it to stabilize. */
	rcc_osc_on(RCC_PLL);
	rcc_wait_for_osc_ready(RCC_PLL);

	/* Select PLL as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_PLLCLK);

	/* Set the peripheral clock frequencies used */
	rcc_ahb_frequency = 48000000;
	rcc_apb1_frequency = 24000000;
	rcc_apb2_frequency = 48000000;
}

void rcc_clock_setup_hsi16(const struct rcc_clock_scale *clock)
{
	/* Enable internal high-speed oscillator. */
	rcc_osc_on(RCC_HSI16);
	rcc_wait_for_osc_ready(RCC_HSI16);

	/* Select HSI as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_HSI16);

	/* Enable/disable high performance mode */
	pwr_set_vos_range(clock->voltage_scale);

	/*
	 * Set prescalers for AHB, ADC, ABP1, ABP2.
	 * Do this before touching the PLL (TODO: why?).
	 */
	rcc_set_hpre(clock->hpre);
	rcc_set_ppre1(clock->ppre1);
	rcc_set_ppre2(clock->ppre2);


	/* Configure flash settings. */
	flash_set_ws(clock->flash_config);

	/* Set the peripheral clock frequencies used. */
	rcc_apb1_frequency = clock->apb1_frequency;
	rcc_apb2_frequency = clock->apb2_frequency;

	rcc_set_msi_range(clock->msi_range);
}

void rcc_clock_setup_hsi(const clock_scale_t *clock)
{
	/* Enable internal high-speed oscillator. */
	rcc_osc_on(HSI);
	rcc_wait_for_osc_ready(HSI);

	/* Select HSI as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_HSICLK);

	/*
	 * Set prescalers for AHB, ADC, ABP1, ABP2.
	 * Do this before touching the PLL (TODO: why?).
	 */
	rcc_set_hpre(clock->hpre);
	rcc_set_ppre1(clock->ppre1);
	rcc_set_ppre2(clock->ppre2);

	rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_PWREN);
	pwr_set_vos_scale(clock->voltage_scale);

	/* I guess this should be in the settings? */
	flash_64bit_enable();
	flash_prefetch_enable();
	/* Configure flash settings. */
	flash_set_ws(clock->flash_config);

	/* Set the peripheral clock frequencies used. */
	rcc_apb1_frequency = clock->apb1_frequency;
	rcc_apb2_frequency = clock->apb2_frequency;
}

void rcc_clock_setup_hsi_3v3(const clock_scale_t *clock)
{
	/* Enable internal high-speed oscillator. */
	rcc_osc_on(HSI);
	rcc_wait_for_osc_ready(HSI);

	/* Select HSI as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_HSI);

//	/* Enable/disable high performance mode */
//	if (!clock->power_save) {
//		pwr_set_vos_scale(SCALE1);
//	} else {
//		pwr_set_vos_scale(SCALE2);
//	}

	/*
	 * Set prescalers for AHB, ADC, ABP1, ABP2.
	 * Do this before touching the PLL (TODO: why?).
	 */
	rcc_set_hpre(clock->hpre);
	rcc_set_ppre1(clock->ppre1);
	rcc_set_ppre2(clock->ppre2);

	rcc_set_main_pll_hsi(clock->pllm, clock->plln,
			clock->pllp, clock->pllq);

	/* Enable PLL oscillator and wait for it to stabilize. */
	rcc_osc_on(PLL);
	rcc_wait_for_osc_ready(PLL);

	/* Configure flash settings. */
	flash_set_ws(clock->flash_config);

	/* Select PLL as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_PLL);

	/* Wait for PLL clock to be selected. */
	rcc_wait_for_sysclk_status(PLL);

	/* Set the peripheral clock frequencies used. */
	rcc_apb1_frequency = clock->apb1_frequency;
	rcc_apb2_frequency = clock->apb2_frequency;

	/* Disable internal high-speed oscillator. */
	//rcc_osc_off(HSI);
}

void PWR_Shutdown()
{
    printf("Shutdown\n");
    BACKLIGHT_Brightness(0);
    rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_HSICLK);
    rcc_wait_for_osc_ready(HSI);
    while(1) ;
}

/* Set the clock to max speed. */
static void clock_setup(void)
{
#if defined(STM32F0)
	rcc_clock_setup_in_hsi_out_48mhz();
#elif defined(STM32L0)
	/* After a reset, the system uses [email protected] */
	/* end result: 32MHz PLLVCO from HSI16,
	 *	 no system/periph clock divide.
	 */

	/* increase the latency to 1 wait state (we'll be speeding up) */
	flash_set_ws(1);

	/* turn on HSI16 */
	rcc_osc_on(RCC_HSI16);
	rcc_wait_for_osc_ready(RCC_HSI16);

	/* run AHB, APB1, APB2 at full speed */
	rcc_set_hpre(RCC_CFGR_HPRE_NODIV);
	rcc_set_ppre1(RCC_CFGR_PPRE1_NODIV);
	rcc_set_ppre2(RCC_CFGR_PPRE2_NODIV);

	/* turn off PLL and wait for it to fully stop */
	rcc_osc_off(RCC_PLL);
	while (RCC_CR & RCC_CR_PLLRDY);

	/* set PLL source to HSI16 */
	RCC_CFGR &= ~(1<<16); // RCC_CFGR_PLLSRC

	/* set up PLL */
	rcc_set_pll_multiplier(RCC_CFGR_PLLMUL_MUL4);
	rcc_set_pll_divider(RCC_CFGR_PLLDIV_DIV2);

	/* turn on and switch to PLL */
	rcc_osc_on(RCC_PLL);
	rcc_wait_for_osc_ready(RCC_PLL);
	rcc_set_sysclk_source(RCC_PLL);

	rcc_ahb_frequency = 32000000;
	rcc_apb1_frequency = 32000000;
	rcc_apb2_frequency = 32000000;
#else
	#error "Implement a clock setup."
#endif
}

void rcc_clock_setup_pll(const struct rcc_clock_scale *clock)
{
	/* Turn on the appropriate source for the PLL */
	if (clock->pll_source == RCC_CFGR_PLLSRC_HSE_CLK) {
		rcc_osc_on(RCC_HSE);
		rcc_wait_for_osc_ready(RCC_HSE);
	} else {
		rcc_osc_on(RCC_HSI);
		rcc_wait_for_osc_ready(RCC_HSI);
	}

	/*
	 * Set prescalers for AHB, ADC, ABP1, ABP2.
	 * Do this before touching the PLL (TODO: why?).
	 */
	rcc_set_hpre(clock->hpre);
	rcc_set_ppre1(clock->ppre1);
	rcc_set_ppre2(clock->ppre2);

	rcc_periph_clock_enable(RCC_PWR);
	pwr_set_vos_scale(clock->voltage_scale);

	/* I guess this should be in the settings? */
	flash_64bit_enable();
	flash_prefetch_enable();
	/* Configure flash settings. */
	flash_set_ws(clock->flash_config);

	rcc_set_pll_configuration(clock->pll_source, clock->pll_mul,
				  clock->pll_div);

	/* Enable PLL oscillator and wait for it to stabilize. */
	rcc_osc_on(RCC_PLL);
	rcc_wait_for_osc_ready(RCC_PLL);

	/* Select PLL as SYSCLK source. */
	rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_PLLCLK);

	/* Set the peripheral clock frequencies used. */
	rcc_ahb_frequency  = clock->ahb_frequency;
	rcc_apb1_frequency = clock->apb1_frequency;
	rcc_apb2_frequency = clock->apb2_frequency;
}