本文整理汇总了C++中qemu_fflush函数的典型用法代码示例。如果您正苦于以下问题：C++ qemu_fflush函数的具体用法？C++ qemu_fflush怎么用？C++ qemu_fflush使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了qemu_fflush函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: qemu_mallocz
/* Initialisation routine */
void *ds1225y_init(target_phys_addr_t mem_base, const char *filename)
{
ds1225y_t *s;
int mem_indexRW, mem_indexRP;
QEMUFile *file;
s = qemu_mallocz(sizeof(ds1225y_t));
s->chip_size = 0x2000; /* Fixed for ds1225y chip: 8 KiB */
s->contents = qemu_mallocz(s->chip_size);
s->protection = 7;
/* Read current file */
file = qemu_fopen(filename, "rb");
if (file) {
/* Read nvram contents */
qemu_get_buffer(file, s->contents, s->chip_size);
qemu_fclose(file);
}
s->file = qemu_fopen(filename, "wb");
if (s->file) {
/* Write back contents, as 'wb' mode cleaned the file */
qemu_put_buffer(s->file, s->contents, s->chip_size);
qemu_fflush(s->file);
}
/* Read/write memory */
mem_indexRW = cpu_register_io_memory(nvram_read, nvram_write, s);
cpu_register_physical_memory(mem_base, s->chip_size, mem_indexRW);
/* Read/write protected memory */
mem_indexRP = cpu_register_io_memory(nvram_read, nvram_write_protected, s);
cpu_register_physical_memory(mem_base + s->chip_size, s->chip_size, mem_indexRP);
return s;
}示例2: qemu_put_buffer
void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, size_t size)
{
size_t l;
if (f->last_error) {
return;
}
while (size > 0) {
l = IO_BUF_SIZE - f->buf_index;
if (l > size) {
l = size;
}
memcpy(f->buf + f->buf_index, buf, l);
f->bytes_xfer += l;
add_to_iovec(f, f->buf + f->buf_index, l);
f->buf_index += l;
if (f->buf_index == IO_BUF_SIZE) {
qemu_fflush(f);
}
if (qemu_file_get_error(f)) {
break;
}
buf += l;
size -= l;
}
}示例3: qemu_put_buffer
void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, int size)
{
int l;
#ifdef CONFIG_S2E
if (s2e_dev_snapshot_enable) {
assert(!f);
s2e_qemu_put_buffer(g_s2e_state, buf, size);
return;
}
#endif
if (!f->has_error && f->is_write == 0 && f->buf_index > 0) {
fprintf(stderr,
"Attempted to write to buffer while read buffer is not empty\n");
abort();
}
while (!f->has_error && size > 0) {
l = IO_BUF_SIZE - f->buf_index;
if (l > size)
l = size;
memcpy(f->buf + f->buf_index, buf, l);
f->is_write = 1;
f->buf_index += l;
buf += l;
size -= l;
if (f->buf_index >= IO_BUF_SIZE)
qemu_fflush(f);
}
}示例4: qemu_fclose
int qemu_fclose(QEMUFile *f)
{
int ret = 0;
qemu_fflush(f);
if (f->close)
ret = f->close(f->opaque);
qemu_free(f);
return ret;
}示例5: qemu_fflush
const QEMUSizedBuffer *qemu_buf_get(QEMUFile *f)
{
QEMUBuffer *p;
qemu_fflush(f);
p = f->opaque;
return p->qsb;
}示例6: qemu_put_byte
void qemu_put_byte(QEMUFile *f, int v)
{
if (!f->has_error && f->is_write == 0 && f->buf_index > 0) {
fprintf(stderr,
"Attempted to write to buffer while read buffer is not empty\n");
abort();
}
f->buf[f->buf_index++] = v;
f->is_write = 1;
if (f->buf_index >= IO_BUF_SIZE)
qemu_fflush(f);
}示例7: qemu_put_byte
void qemu_put_byte(QEMUFile *f, int v)
{
if (f->last_error) {
return;
}
f->buf[f->buf_index] = v;
f->bytes_xfer++;
add_to_iovec(f, f->buf + f->buf_index, 1);
f->buf_index++;
if (f->buf_index == IO_BUF_SIZE) {
qemu_fflush(f);
}
}示例8: nvram_writeb
static void nvram_writeb (void *opaque, target_phys_addr_t addr, uint32_t val)
{
ds1225y_t *s = opaque;
#ifdef DEBUG_NVRAM
printf("nvram: write 0x%x at " TARGET_FMT_lx "\n", val, addr);
#endif
s->contents[addr] = val & 0xff;
if (s->file) {
qemu_fseek(s->file, addr, SEEK_SET);
qemu_put_byte(s->file, (int)val);
qemu_fflush(s->file);
}
}示例9: add_to_iovec
static void add_to_iovec(QEMUFile *f, const uint8_t *buf, size_t size)
{
/* check for adjacent buffer and coalesce them */
if (f->iovcnt > 0 && buf == f->iov[f->iovcnt - 1].iov_base +
f->iov[f->iovcnt - 1].iov_len) {
f->iov[f->iovcnt - 1].iov_len += size;
} else {
f->iov[f->iovcnt].iov_base = (uint8_t *)buf;
f->iov[f->iovcnt++].iov_len = size;
}
if (f->iovcnt >= MAX_IOV_SIZE) {
qemu_fflush(f);
}
}示例10: colo_send_message
static void colo_send_message(QEMUFile *f, COLOMessage msg,
Error **errp)
{
int ret;
if (msg >= COLO_MESSAGE__MAX) {
error_setg(errp, "%s: Invalid message", __func__);
return;
}
qemu_put_be32(f, msg);
qemu_fflush(f);
ret = qemu_file_get_error(f);
if (ret < 0) {
error_setg_errno(errp, -ret, "Can't send COLO message");
}
trace_colo_send_message(COLOMessage_lookup[msg]);
}示例11: qemu_fseek
int64_t qemu_fseek(QEMUFile *f, int64_t pos, int whence)
{
if (whence == SEEK_SET) {
/* nothing to do */
} else if (whence == SEEK_CUR) {
pos += qemu_ftell(f);
} else {
/* SEEK_END not supported */
return -1;
}
if (f->put_buffer) {
qemu_fflush(f);
f->buf_offset = pos;
} else {
f->buf_offset = pos;
f->buf_index = 0;
f->buf_size = 0;
}
return pos;
}示例12: colo_send_message_value
static void colo_send_message_value(QEMUFile *f, COLOMessage msg,
uint64_t value, Error **errp)
{
Error *local_err = NULL;
int ret;
colo_send_message(f, msg, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
qemu_put_be64(f, value);
qemu_fflush(f);
ret = qemu_file_get_error(f);
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to send value for message:%s",
COLOMessage_lookup[msg]);
}
}示例13: qemu_put_byte
void qemu_put_byte(QEMUFile *f, int v)
{
#ifdef CONFIG_S2E
if (s2e_dev_snapshot_enable) {
assert(!f);
s2e_qemu_put_byte(g_s2e_state, v);
return;
}
#endif
if (!f->has_error && f->is_write == 0 && f->buf_index > 0) {
fprintf(stderr,
"Attempted to write to buffer while read buffer is not empty\n");
abort();
}
f->buf[f->buf_index++] = v;
f->is_write = 1;
if (f->buf_index >= IO_BUF_SIZE)
qemu_fflush(f);
}示例14: qemu_fclose
/** Closes the file
*
* Returns negative error value if any error happened on previous operations or
* while closing the file. Returns 0 or positive number on success.
*
* The meaning of return value on success depends on the specific backend
* being used.
*/
int qemu_fclose(QEMUFile *f)
{
int ret;
qemu_fflush(f);
ret = qemu_file_get_error(f);
if (f->ops->close) {
int ret2 = f->ops->close(f->opaque);
if (ret >= 0) {
ret = ret2;
}
}
/* If any error was spotted before closing, we should report it
* instead of the close() return value.
*/
if (f->last_error) {
ret = f->last_error;
}
g_free(f);
trace_qemu_file_fclose();
return ret;
}示例15: qemu_put_buffer
void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, int size)
{
int l;
if (!f->has_error && f->is_write == 0 && f->buf_index > 0) {
fprintf(stderr,
"Attempted to write to buffer while read buffer is not empty\n");
abort();
}
while (!f->has_error && size > 0) {
l = IO_BUF_SIZE - f->buf_index;
if (l > size)
l = size;
memcpy(f->buf + f->buf_index, buf, l);
f->is_write = 1;
f->buf_index += l;
buf += l;
size -= l;
if (f->buf_index >= IO_BUF_SIZE)
qemu_fflush(f);
}
}