C++ putpad函数代码示例

void
pico_toggle_color(int on)
{
    if(on){
	if(pico_hascolor())
	  _using_color = 1;
    }
    else{
	_using_color = 0;
	if(_color_inited){
	    _color_inited = 0;
	    if(!panicking())
	      free_color_table(&color_tbl);

	    if(ANSI_COLOR())
	      putpad("\033[39;49m");
	    else{
		if(_op)
		  putpad(_op);
		if(_oc)
		  putpad(_oc);
	    }
	}
    }
}

static void tcapclose(void)
{
	putpad(tgoto(CM, 0, term.t_nrow));
	putpad(TE);
	tioflush();
	tiorestore();
}

/*
 *     Start or end underline mode
 *
 * Result: escape sequence to go into or out of underline is output
 *
 * Arg   state = ON   set underline
 *               OFF  set normal
 */
void
flip_ul(int state)
{
    extern char *_setunderline, *_clearunderline;

    if((pulstate = state) == TRUE){
	if(_setunderline != NULL)
	  putpad(_setunderline);
    }
    else{
	/*
	 * Unfortunately, some termcap entries configure end underline to
	 * be clear all attributes.
	 */
	if(_clearunderline != NULL){
	    if(!color_blasted_by_attrs)
	      color_blasted_by_attrs = pico_get_cur_color();

	    _force_fg_color_change = _force_bg_color_change = 1;
	    putpad(_clearunderline);
	    pboldstate = (pboldstate == FALSE) ?  pboldstate : A_UNKNOWN;
	    pinvstate = (pinvstate == FALSE) ?  pinvstate : A_UNKNOWN;
	    rev_color_state = A_UNKNOWN;
	}
    }
}

/*
 * Delete nchunk line(s) from "row", replacing the
 * bottom line on the screen with a blank line.
 * Unless we're using the scrolling region, this is
 * done with a crafty sequences of insert and delete
 * lines.  The presence of the echo area makes a
 * boundry condition go away.
 */
ttdell(row, bot, nchunk)
{
    register int	i, nl;

    if (row == bot) {		/* One line special case	*/
	ttmove(row, 0);
	tteeol();
	return;
    }
    if (CS) {			/* scrolling region	*/
	nl = bot - row;
	ttwindow(row, bot);
	ttmove(bot, 0);
	while (nchunk--) putpad(SF, nl);
	ttnowindow();
    }
    else if(insdel) {
	ttmove(row, 0);			/* Else use insert/delete line	*/
	nl = nrow - ttrow;
	if (pDL) putpad(tgoto(pDL, 0, nchunk), nl);
	else for (i=0; i<nchunk; i++)	/* For all lines in the chunk	*/
		putpad(DL, nl);
	ttmove(1+bot-nchunk,0);
	nl = nrow - ttrow;	/* ttmove() changes ttrow */
	if (pAL) putpad(tgoto(pAL, 0, nchunk), nl);
	else for (i=0; i<nchunk; i++)	/* For all lines in the chunk	*/
		putpad(AL, nl);
	ttrow = HUGE;
	ttcol = HUGE;
    } else panic("ttdell: Can't insert/delete line");
}

/*
 * Insert nchunk blank line(s) onto the
 * screen, scrolling the last line on the
 * screen off the bottom.  Use the scrolling
 * region if possible for a smoother display.
 * If no scrolling region, use a set
 * of insert and delete line sequences
 */
ttinsl(row, bot, nchunk) {
    register int	i, nl;

    if (row == bot) {		/* Case of one line insert is	*/
	ttmove(row, 0);		/*	special			*/
	tteeol();
	return;
    }
    if (CS && SR) {		/* Use scroll region and back index	*/
	nl = bot - row;
	ttwindow(row,bot);
	ttmove(row, 0);
	while (nchunk--) putpad(SR, nl);
	ttnowindow();
	return;
    } else if (insdel) {
	ttmove(1+bot-nchunk, 0);
	nl = nrow - ttrow;
	if (pDL) putpad(tgoto(pDL, 0, nchunk), nl);
	else for (i=0; i<nchunk; i++)	/* For all lines in the chunk	*/
		putpad(DL, nl);
	ttmove(row, 0);
	nl = nrow - ttrow;	/* ttmove() changes ttrow */
	if (pAL) putpad(tgoto(pAL, 0, nchunk), nl);
	else for (i=0; i<nchunk; i++)	/* For all lines in the chunk	*/
		putpad(AL, nl);
	ttrow = HUGE;
	ttcol = HUGE;
    } else panic("ttinsl: Can't insert/delete line");
}

/* actions associated with putting the terminal in open mode */
void
tostart(void)
{
	putpad(VS);
	putpad(KS);
	if (!value(MESG)) {
		if (ttynbuf[0] == 0) {
			register char *tn;
			if ((tn=ttyname(2)) == NULL &&
			    (tn=ttyname(1)) == NULL &&
			    (tn=ttyname(0)) == NULL)
				ttynbuf[0] = 1;
			else
				safecp(ttynbuf, tn, sizeof ttynbuf,
						"%s too long", tn);
		}
		if (ttynbuf[0] != 1) {
			struct stat sbuf;
			stat(ttynbuf, &sbuf);
			ttymesg = sbuf.st_mode & 0777;
			chmod(ttynbuf,
#ifdef UCBV7
	/*
	 * This applies to the UCB V7 Pdp-11 system with the
	 * -u write option only.
	 */
					0611	/* 11 = urgent only allowed */
#else
					0600
#endif
						);
		}
	}
}

/*
 * NOTE:
 * On Linux console, the 'me' termcap setting \E[m resets _all_ attributes,
 * including color.  However, if we use 'se' instead, it doesn't clear the
 * boldface.  To compensate, we reset the colors when we put out any "ending"
 * sequence, such as 'me'.
 *
 * In rxvt (2.12), setting _any_ attribute seems to clobber the color settings. 
 */
static void
tcapattr(int attr)
{
	static	const	struct	{
		char	**start;
		char	**end;
		int	mask;
	} tbl[] = {
		{ &SO, &SE, VASEL|VAREV },
		{ &US, &UE, VAUL },
		{ &US, &UE, VAITAL },
		{ &MD, &ME, VABOLD },
	};
	static	int last;

	attr = VATTRIB(attr);	/* FIXME: color? */

	attr &= ~(VAML|VAMLFOC);

	if (attr != last) {
		register int n;
		register char *s;
		int	diff = attr ^ last;
		int	ends = FALSE;

		/* turn OFF old attributes */
		for (n = 0; n < TABLESIZE(tbl); n++) {
			if ((tbl[n].mask & diff) != 0
			 && (tbl[n].mask & attr) == 0
			 && (s = *(tbl[n].end))  != 0) {
				putpad(s);
#if OPT_COLOR
				reinitialize_colors();
#endif
				ends = TRUE;
				diff &= ~(tbl[n].mask);
			}
		}

		/* turn ON new attributes */
		for (n = 0; n < TABLESIZE(tbl); n++) {
			if ((tbl[n].mask & diff)  != 0
			 && (tbl[n].mask & attr)  != 0
			 && (s = *(tbl[n].start)) != 0) {
				putpad(s);
				diff &= ~(tbl[n].mask);
			}
		}

		if (SO != 0 && SE != 0) {
			if (ends && (attr & (VAREV|VASEL))) {
				putpad(SO);
			} else if (diff) {	/* we didn't find it */
				putpad(SE);
			}
		}
		last = attr;
	}
}

/* Actions associated with putting the terminal in the right mode. */
void
tostop(void)
{
	putpad(VE);
	putpad(KE);
	if (!value(MESG) && ttynbuf[0]>1)
		chmod(ttynbuf, ttymesg);
}

static void tcaprev(int state)
{
	if (state) {
		if (SO != NULL)
			putpad(SO);
	} else if (SE != NULL)
		putpad(SE);
}

/*
 * restore terminal to normal mode (upon exit, for shell escapes).
 */
ttyrestore()
{
    putpad(tgoto(CM, 0, LINES-1));	/* go to lower left corner */
    putpad(KE);
    putpad(TE);
    ttybuf = ottybuf;
    ioctl(2, TIOCSETN, &ttybuf);
}

void
dingdong(void)
{

	if (flash_screen && value(vi_FLASH))
		putpad((unsigned char *)flash_screen);
	else if (value(vi_ERRORBELLS))
		putpad((unsigned char *)bell);
}

/*
 * Clean up the terminal, in anticipation of
 * a return to the command interpreter. This is a no-op
 * on the ANSI display. On the SCALD display, it sets the
 * window back to half screen scrolling. Perhaps it should
 * query the display for the increment, and put it
 * back to what it was.
 */
tttidy() {
#ifndef TCCONIO
	if (TE && *TE) putpad(TE, 1);	/* set the term back to normal mode */
	putpad(tgoto(CM, 0, ttrow), 1);	/* not nrow */
	if (CE && *CE) putpad(CE, 1);	/* erase one line */
# ifdef	XKEYS
	ttykeymaptidy();
# endif
#endif /* TCCONIO */
}

/*
 * tinfodelete - delete a character at the current character position.
 */
static void
tinfodelete(void)
{
    if(_startdelete == NULL && _enddelete == NULL)
      putpad(_deletechar);
    else{
	putpad(_startdelete);
	putpad(_deletechar);
	putpad(_enddelete);
    }
}

/*
 * tinfoinsert - insert a character at the current character position.
 *               _insertchar takes precedence.
 */
static void
tinfoinsert(UCS ch)
{
    if(_insertchar != NULL){
	putpad(_insertchar);
	ttputc(ch);
    }
    else{
	putpad(_startinsert);
	ttputc(ch);
	putpad(_endinsert);
    }
}

/*
 * put terminal into screen mode.
 */
ttyinit()
{
    gtty(2, &ttybuf);
    UPPERCASE = (ttybuf.sg_flags & LCASE) != 0;
    HASTABS = (ttybuf.sg_flags & XTABS) != 0;
    NONL = (ttybuf.sg_flags & CRMOD) == 0;
    ottybuf = ttybuf;
    ttybuf.sg_flags &= ~(ECHO|CRMOD);
    ttybuf.sg_flags |= CBREAK;
    ioctl(2, TIOCSETN, &ttybuf);	/* or stty */

    putpad(TI);
    putpad(KS);	/* only needed if you use keypad */
}