C++ prvSetupHardware函数代码示例

int main( void )
{
	prvSetupHardware();

	/* Create the queue used to pass "I'm alive" messages to the check task. */
	xFileScopeCheckQueue = xQueueCreate( 1, sizeof( unsigned long ) );

	/* One check task uses the task parameter to receive the queue handle.
	This allows the file scope variable to be accessed from within the task.
	The pvParameters member of xRegTest2Parameters can only be set after the
	queue has been created so is set here. */
	xRegTest2Parameters.pvParameters = xFileScopeCheckQueue;

	/* Create the three test tasks.  Handles to the created tasks are not
	required, hence the second parameter is NULL. */
	xTaskCreateRestricted( &xRegTest1Parameters, NULL );
    xTaskCreateRestricted( &xRegTest2Parameters, NULL );
	xTaskCreateRestricted( &xCheckTaskParameters, NULL );

	/* Create the tasks that are created using the original xTaskCreate() API
	function. */
	xTaskCreate(	prvOldStyleUserModeTask,	/* The function that implements the task. */
					( signed char * ) "Task1",	/* Text name for the task. */
					100,						/* Stack depth in words. */
					NULL,						/* Task parameters. */
					3,							/* Priority and mode (user in this case). */
					NULL						/* Handle. */
				);

	xTaskCreate(	prvOldStylePrivilegedModeTask,	/* The function that implements the task. */
					( signed char * ) "Task2",		/* Text name for the task. */
					100,							/* Stack depth in words. */
					NULL,							/* Task parameters. */
					( 3 | portPRIVILEGE_BIT ),		/* Priority and mode. */
					NULL							/* Handle. */
				);

	/* Start the scheduler. */
	vTaskStartScheduler();

	/* Will only get here if there was insufficient memory to create the idle
	task. */
	for( ;; );
	return 0;
}

/*
 * Creates the majority of the demo application tasks before starting the
 * scheduler.
 */
void main(void)
{
xTaskHandle xCreatedTask;

	prvSetupHardware();

	/* Start the reg test tasks which test the context switching mechanism. */
	xTaskCreate( vRegTest1Task, "RegTst1", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, &xCreatedTask );
	xPortUsesFloatingPoint( xCreatedTask );
	
	xTaskCreate( vRegTest2Task, "RegTst2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, &xCreatedTask );
	xPortUsesFloatingPoint( xCreatedTask );

	xTaskCreate( vuIP_Task, "uIP", mainuIP_STACK_SIZE, NULL, mainuIP_TASK_PRIORITY, NULL );

	/* Start the check task as described at the top of this file. */
	xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* Start the standard demo tasks.  These don't perform any particular useful
	functionality, other than to demonstrate the FreeRTOS API being used. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vCreateBlockTimeTasks();
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
    vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
	vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );
    vStartQueuePeekTasks();
	vStartRecursiveMutexTasks();
	
	/* Start the math tasks as described at the top of this file. */
	vStartMathTasks( mainFLOP_TASK_PRIORITY );

	/* The suicide tasks must be created last as they need to know how many
	tasks were running prior to their creation in order to ascertain whether
	or not the correct/expected number of tasks are running at any given time. */
    vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

	/* Start the tasks running. */
	vTaskStartScheduler();

	/* Will only get here if there was insufficient heap memory to create the idle
    task.  Increase the configTOTAL_HEAP_SIZE setting in FreeRTOSConfig.h. */
	for( ;; );
}

int main (void)
{
	char i;

	prvSetupHardware ();
	for(i=0; i<sizeof(ob_data); i++) {
		send_buffer.payload[i]=0;
		recv_buffer.payload[i]=0;
	}
	xTaskCreate (vUSBCDCTask	, (signed portCHAR *) "USB_CDC"	, mainUSB_TASK_STACK	, NULL, mainUSB_PRIORITY, NULL);

    vTaskStartScheduler ();

    ob_app_start=xTaskGetTickCount();
    ob_send_time=xTaskGetTickCount();

    return 0;
}

int main(void)
{
    prvSetupHardware();
    
    queueCreation();
    
    taskCreation();
           
    __enable_irq();
    chSysInit();

    while (TRUE){

    }
    
    
    return 0;    
}

/*-----------------------------------------------------------*/
int main( void )
{
	/* Prepare the hardware to run this demo. */
	prvSetupHardware();

	/* The mainCREATE_SIMPLE_BLINKY_DEMO_ONLY setting is described at the top
	of this file. */
	xTaskCreate( prvDataSendTask,					/* The function that implements the task. */
						( signed char * ) "DataSend", 				/* The text name assigned to the task - for debug only as it is not used by the kernel. */
						DATA_SEND_TASK_STACK_SIZE, 				/* The size of the stack to allocate to the task. */
						( void * ) DATA_SEND_TASK_PARAMETER, /* The parameter passed to the task - just to check the functionality. */
						DATA_SEND_TASK_PRIORITY, 		/* The priority assigned to the task. */
						NULL );									/* The task handle is not required, so NULL is passed. */
	xTaskCreate( prvDataReceiveTask,					/* The function that implements the task. */
						( signed char * ) "Sensor", 				/* The text name assigned to the task - for debug only as it is not used by the kernel. */
						DATA_RECEIVE_TASK_STACK_SIZE, 				/* The size of the stack to allocate to the task. */
						( void * ) DATA_RECEIVE_PARAMETER, /* The parameter passed to the task - just to check the functionality. */
						DATA_RECEIVE_TASK_PRIORITY, 		/* The priority assigned to the task. */
						NULL );									/* The task handle is not required, so NULL is passed. */
	xTaskCreate( prvControlTask,					/* The function that implements the task. */
						( signed char * ) "Sensor", 				/* The text name assigned to the task - for debug only as it is not used by the kernel. */
						CONTROL_TASK_STACK_SIZE, 				/* The size of the stack to allocate to the task. */
						( void * ) CONTROL_PARAMETER, /* The parameter passed to the task - just to check the functionality. */
						CONTROL_TASK_PRIORITY, 		/* The priority assigned to the task. */
						NULL );									/* The task handle is not required, so NULL is passed. */
//	xTaskCreate( prvBlinkLedTask,					/* The function that implements the task. */
//						( signed char * ) "Led", 				/* The text name assigned to the task - for debug only as it is not used by the kernel. */
//						configMINIMAL_STACK_SIZE, 				/* The size of the stack to allocate to the task. */
//						( void * ) LED_BLINK_PARAMETER, /* The parameter passed to the task - just to check the functionality. */
//						BLINKY_TASK_PRIORITY, 		/* The priority assigned to the task. */
//						NULL );									/* The task handle is not required, so NULL is passed. */

	/* Start the tasks and timer running. */
	vTaskStartScheduler();

	/* If all is well, the scheduler will now be running, and the following
	line will never be reached.  If the following line does execute, then
	there was insufficient FreeRTOS heap memory available for the idle and/or
	timer tasks	to be created.  See the memory management section on the
	FreeRTOS web site for more details. */
	for( ;; );

	return 0;
}

int main(void) {
	/* Setup the hardware. */
	prvSetupHardware();

	/* Create the SPI mutex */
	xSPIMutex = xSemaphoreCreateMutex();

	/* Initialize the MAC layer */
	mac_init(xSPIMutex, packet_received, CHANNEL);

	/* Add the local task */
	xTaskCreate( vSendingTask, (const signed char*) "sender", configMINIMAL_STACK_SIZE, NULL, 1, NULL );

	/* Start the scheduler. */
	vTaskStartScheduler();

	/* As the scheduler has been started we should never get here! */
	return 0;
}

/* Create all the demo tasks then start the scheduler. */
void main( void )
{
	/* Just sets up the LED outputs. */
	prvSetupHardware();

	/* Standard demo tasks. */
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
	vStartQueuePeekTasks();
	
	/* Create the check task as described at the top of this file. */
	xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, mainCHECK_PARAMETER, mainCHECK_TASK_PRIORITY, NULL );

	/* Create the RegTest tasks as described at the top of this file. */
	xTaskCreate( vRegTest1, "Reg1", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
	xTaskCreate( vRegTest2, "Reg2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );

	#ifdef __IAR_V850ES_Fx3__
	{
		/* The extra IO required for the com test and led flashing tasks is only
		available on the application board, not the target boards. */	
		vAltStartComTestTasks( mainCOMTEST_PRIORITY, mainBAUD_RATE, mainCOMTEST_LED );
		vStartLEDFlashTasks( mainFLASH_PRIORITY );
		
		/* The Fx3 also has enough RAM to run loads more tasks. */
		vStartRecursiveMutexTasks();
		vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
		vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );				
	}
	#endif	
	
	/* The suicide tasks must be created last as they need to know how many
	tasks were running prior to their creation in order to ascertain whether
	or not the correct/expected number of tasks are running at any given time. */
    vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
	
	/* Start the scheduler. */
	vTaskStartScheduler();

	/* If this line is reached then vTaskStartScheduler() returned because there
	was insufficient heap memory remaining for the idle task to be created. */
	for( ;; );
}

void __attribute__((noreturn)) mainloop (void)
{
    prvSetupHardware ();

    vLedInit();

    xTaskCreate (vUSBCDCTask, (signed portCHAR *) "USB", TASK_USB_STACK,
	NULL, TASK_USB_PRIORITY, NULL);

    vCmdInit();

    vInitProtocolLayer();

    vLedSetGreen(0);

    vTaskStartScheduler ();

    while(1);
}

/* See the documentation page for this demo on the FreeRTOS.org web site for
full information - including hardware setup requirements. */
int main( void )
{
    /* Prepare the hardware to run this demo. */
    prvSetupHardware();

    /* The configCREATE_LOW_POWER_DEMO setting is described at the top of
    this file. */
#if configCREATE_LOW_POWER_DEMO == 1
    {
        main_low_power();
    }
#else
    {
        main_full();
    }
#endif

    return 0;
}

/**
 * \brief Run USART unit tests
 */
int main(void)
{
	/* Prepare the hardware to run this demo. */
	prvSetupHardware();

	/* Create the test task. */
	create_usart_tasks(BOARD_USART, 1024, tskIDLE_PRIORITY);

	/* Start the RTOS scheduler. */
	vTaskStartScheduler();

	/* If all is well, the scheduler will now be running, and the following line
	will never be reached.  If the following line does execute, then there was
	insufficient FreeRTOS heap memory available for the idle and/or timer tasks
	to be created.  See the memory management section on the FreeRTOS web site
	for more details. */
	for (;;) {
	}
}

int main( void )
{

	/* Configure the hardware for use by this demo. */
	prvSetupHardware();


	//xTaskCreate( vuIP_Task, ( signed char * ) "uIP", mainBASIC_WEB_STACK_SIZE, ( void * ) NULL, mainUIP_TASK_PRIORITY, NULL );
	//make a task for UART

	char ip_address[32];

	LCD_Init();
	LCD_ClearScreen();
	sprintf(ip_address , "IP Address: %d.%d.%d.%d",configIP_ADDR0,configIP_ADDR1,configIP_ADDR2,configIP_ADDR3);

	LCD_PrintText(ip_address);

	//xTaskCreate( vUARTTask, ( signed char * ) "UART_Modem", mainBASIC_WEB_STACK_SIZE, ( void * ) NULL, mainUIP_TASK_PRIORITY, NULL );
	/* Start the scheduler so the created tasks start executing. */
	xTaskCreate( vLEDTask, ( signed char * ) "LED_TOGGOLE", mainBASIC_WEB_STACK_SIZE, ( void * ) NULL, mainUIP_TASK_PRIORITY, NULL );

	xTaskCreate( vLCDTask, ( signed char * ) "LCD_DISPLAY", mainBASIC_WEB_STACK_SIZE, ( void * ) NULL, mainUIP_TASK_PRIORITY, NULL );

	xTaskCreate( vuIP_Task, ( signed char * ) "uIP", mainBASIC_WEB_STACK_SIZE, ( void * ) NULL, mainUIP_TASK_PRIORITY+1, NULL );

	//xTaskCreate( vUSBTask, ( signed char * ) "USB_Device", mainBASIC_WEB_STACK_SIZE, ( void * ) NULL, mainUIP_TASK_PRIORITY, NULL );
	xTaskCreate( usb_host_main, ( signed char * ) "USB_Device", mainBASIC_WEB_STACK_SIZE, ( void * ) NULL, mainUIP_TASK_PRIORITY+3, NULL );
	//xTaskCreate( vZigbeeTask, ( signed char * ) "Zigbee", mainBASIC_WEB_STACK_SIZE, ( void * ) NULL, mainUIP_TASK_PRIORITY, NULL );

	vTaskStartScheduler();






    /* If all is well we will never reach here as the scheduler will now be
    running the tasks.  If we do reach here then it is likely that there was
    insufficient heap memory available for a resource to be created. */
	for( ;; );
	return 0;
}

int main( void )
{
	/* Prepare the hardware to run this demo. */
	prvSetupHardware();

	/* The configCREATE_SIMPLE_BLINKY_DEMO_ONLY setting is described at the top
	of this file. */
	#if configCREATE_SIMPLE_BLINKY_DEMO_ONLY == 1
	{
		main_blinky();
	}
	#else
	{
		main_full();
	}
	#endif

	return 0;
}

/* The main function */
int main(void)
{
	prvSetupHardware();

	xTaskCreate(prvLedBlink1,(signed char*)"LED",configMINIMAL_STACK_SIZE,
			NULL, tskIDLE_PRIORITY + 1, NULL);

	xTaskCreate(prvLedBlink2,(signed char*)"LED",configMINIMAL_STACK_SIZE,
			NULL, tskIDLE_PRIORITY + 2, NULL);
	xTaskCreate(prvLedBlink3,(signed char*)"LED",configMINIMAL_STACK_SIZE,
			NULL, tskIDLE_PRIORITY + 3, NULL);

	xTaskCreate(prvLedBlink4,(signed char*)"LED",configMINIMAL_STACK_SIZE,
			NULL, tskIDLE_PRIORITY + 4, NULL);
	/* Start the scheduler. */
	vTaskStartScheduler();

    while(1);
}

/**
 * \brief Main code entry point.
 */
int main( void )
{
	xTimerHandle xMonitorTimer;

	/* Prepare the hardware */
	prvSetupHardware();

	/* Init Prime Stack */
	vPrimeStackInitTask();

	/* Configure console */
	configure_dbg_console();
	puts(STRING_HEADER);

	/* Debug port for AppEmu */
	if (!pio_get(PIN_APPEMU_PIO, PIN_APPEMU_TYPE, PIN_APPEMU_MASK)) {
		/* Init AppEmu Application */
		vAppEmuInitTask();
	}

	/* Create timer to monitor tasks execution */
	xMonitorTimer = xTimerCreate(
			(const signed char *const)"Monitor timer",
			SIGNALLING_TIMER_RATE,
			pdTRUE,
			NULL,
			_prime_signalling
			);
	configASSERT(xMonitorTimer);
	xTimerStart(xMonitorTimer, SIGNALLING_TIMER_RATE);

	/* Start the tasks and timer running. */
	vTaskStartScheduler();

	/* If all is well, the scheduler will now be running, and the following
	 * line will never be reached. If the following line does execute, then
	 * there was insufficient FreeRTOS heap memory available for the idle
	 * and/or
	 * timer tasks to be created. See the memory management section on the
	 * FreeRTOS web site for more details. */
	for (;;) {
	}
}

/*********************************************************************************************
 * Setup hardware/software
 *********************************************************************************************/
void prvSetupTask( void *pvParameters ) {

	// Setup hardware
	prvSetupHardware();

	// Test LEDs and indicate program is starting
	prvBlinkLeds();

	// Setup WiFi connection
	prvSetupWifi();

	// Set mode to allModes
	my_mode = allModes;

	// Iterate through each SAV to initialize parameters
	uint8_t sav;
	for(sav=0; sav<NUMBER_SAV; sav++) {

		// Set the SAVs default mode
//		mode_savs[sav] = mode1;
		// TODO: change back to default
		mode_savs[sav] = mode2;

		// Mark the WiFi channels as uninitialized
		wifi_channel[sav] = 0xFF;

		// Initialize all SAVs as inactive
		wifi_channel_active[sav] = FALSE;
	}

	// Indicate that the next channel to be assigned is channel 0
	wifi_next_channel = 0;

	// Create queue for packets
	xPacketQueue = xQueueCreate( maxPacketQueueLength, MAX_LENGTH*sizeof(uint8_t) );

	// Create initial task to connect to Base Station
//	xTaskCreate( prvConnectTask, "", 300 * sizeof(uint8_t), NULL, connectPriority, xConnectHandle );
	xTaskCreate( prvTrafficLightTask, "", 600 * sizeof(uint8_t), NULL, trafficLightPriority, xTrafficLightHandle );

	// Delete this task
	vTaskDelete( xSetupHandle );
}