当前位置: 首页>>代码示例>>C++>>正文

C++ port_to_dev函数代码示例

本文整理汇总了C++中port_to_dev函数的典型用法代码示例。如果您正苦于以下问题：C++ port_to_dev函数的具体用法？C++ port_to_dev怎么用？C++ port_to_dev使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了port_to_dev函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: set_carrier

static inline void set_carrier(port_t *port)
{
	if (!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD))
		netif_carrier_on(port_to_dev(port));
	else
		netif_carrier_off(port_to_dev(port));
}
开发者ID:E-LLP，项目名称:n900，代码行数:7，代码来源:c101.c

示例2: pci200_pci_remove_one

static void pci200_pci_remove_one(struct pci_dev *pdev)
{
	int i;
	card_t *card = pci_get_drvdata(pdev);

	for(i = 0; i < 2; i++)
		if (card->ports[i].card) {
			struct net_device *dev = port_to_dev(&card->ports[i]);
			unregister_hdlc_device(dev);
		}

	if (card->irq)
		free_irq(card->irq, card);

	if (card->rambase)
		iounmap(card->rambase);
	if (card->scabase)
		iounmap(card->scabase);
	if (card->plxbase)
		iounmap(card->plxbase);

	pci_release_regions(pdev);
	pci_disable_device(pdev);
	pci_set_drvdata(pdev, NULL);
	if (card->ports[0].dev)
		free_netdev(card->ports[0].dev);
	if (card->ports[1].dev)
		free_netdev(card->ports[1].dev);
	kfree(card);
}
开发者ID:BackupTheBerlios，项目名称:tuxap，代码行数:30，代码来源:pci200syn.c

示例3: sca_tx_intr

/* Transmit DMA interrupt service */
static inline void sca_tx_intr(port_t *port)
{
	struct net_device *dev = port_to_dev(port);
	u16 dmac = get_dmac_tx(port);
	card_t* card = port_to_card(port);
	u8 stat;

	spin_lock(&port->lock);

	stat = sca_in(DSR_TX(phy_node(port)), card); /* read DMA Status */

	/* Reset DSR status bits */
	sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
		DSR_TX(phy_node(port)), card);

	while (1) {
		pkt_desc __iomem *desc;

		u32 desc_off = desc_offset(port, port->txlast, 1);
		u32 cda = sca_inw(dmac + CDAL, card);
		if ((cda >= desc_off) && (cda < desc_off + sizeof(pkt_desc)))
			break;	/* Transmitter is/will_be sending this frame */

		desc = desc_address(port, port->txlast, 1);
		dev->stats.tx_packets++;
		dev->stats.tx_bytes += readw(&desc->len);
		writeb(0, &desc->stat);	/* Free descriptor */
		port->txlast = next_desc(port, port->txlast, 1);
	}

	netif_wake_queue(dev);
	spin_unlock(&port->lock);
}
开发者ID:020gzh，项目名称:linux，代码行数:34，代码来源:hd64570.c

示例4: n2_destroy_card

static void n2_destroy_card(card_t *card)
{
    int cnt;

    for (cnt = 0; cnt < 2; cnt++)
        if (card->ports[cnt].card) {
            struct net_device *dev = port_to_dev(&card->ports[cnt]);
            unregister_hdlc_device(dev);
        }

    if (card->irq)
        free_irq(card->irq, card);

    if (card->winbase) {
        iounmap(card->winbase);
        release_mem_region(card->phy_winbase, USE_WINDOWSIZE);
    }

    if (card->io)
        release_region(card->io, N2_IOPORTS);
    if (card->ports[0].dev)
        free_netdev(card->ports[0].dev);
    if (card->ports[1].dev)
        free_netdev(card->ports[1].dev);
    kfree(card);
}
开发者ID:mrtos，项目名称:Logitech-Revue，代码行数:26，代码来源:n2.c

示例5: sca_set_carrier

static inline void sca_set_carrier(port_t *port)
{
	if (!(sca_in(get_msci(port) + ST3, port_to_card(port)) & ST3_DCD)) {
#ifdef DEBUG_LINK
		printk(KERN_DEBUG "%s: sca_set_carrier on\n",
		       port_to_dev(port)->name);
#endif
		netif_carrier_on(port_to_dev(port));
	} else {
#ifdef DEBUG_LINK
		printk(KERN_DEBUG "%s: sca_set_carrier off\n",
		       port_to_dev(port)->name);
#endif
		netif_carrier_off(port_to_dev(port));
	}
}
开发者ID:020gzh，项目名称:linux，代码行数:16，代码来源:hd64570.c

示例6: sca_msci_intr

/* MSCI interrupt service */
static inline void sca_msci_intr(port_t *port)
{
	u16 msci = get_msci(port);
	card_t* card = port_to_card(port);
	u8 stat = sca_in(msci + ST1, card); /* read MSCI ST1 status */

	/* Reset MSCI TX underrun and CDCD status bit */
	sca_out(stat & (ST1_UDRN | ST1_CDCD), msci + ST1, card);

	if (stat & ST1_UDRN) {
		/* TX Underrun error detected */
		port_to_dev(port)->stats.tx_errors++;
		port_to_dev(port)->stats.tx_fifo_errors++;
	}

	if (stat & ST1_CDCD)
		sca_set_carrier(port);
}
开发者ID:020gzh，项目名称:linux，代码行数:19，代码来源:hd64570.c

示例7: sca_msci_intr

static inline void sca_msci_intr(port_t *port)
{
    u16 msci = get_msci(port);
    card_t* card = port_to_card(port);
    u8 stat = sca_in(msci + ST1, card);


    sca_out(stat & (ST1_UDRN | ST1_CDCD), msci + ST1, card);

    if (stat & ST1_UDRN) {

        port_to_dev(port)->stats.tx_errors++;
        port_to_dev(port)->stats.tx_fifo_errors++;
    }

    if (stat & ST1_CDCD)
        sca_set_carrier(port);
}
开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:18，代码来源:hd64570.c

示例8: sca_msci_intr

/* MSCI interrupt service */
static inline void sca_msci_intr(port_t *port)
{
	u16 msci = get_msci(port);
	card_t* card = port_to_card(port);
	u8 stat = sca_in(msci + ST1, card); /* read MSCI ST1 status */

	/* Reset MSCI TX underrun and CDCD status bit */
	sca_out(stat & (ST1_UDRN | ST1_CDCD), msci + ST1, card);

	if (stat & ST1_UDRN) {
		struct net_device_stats *stats = hdlc_stats(port_to_dev(port));
		stats->tx_errors++; /* TX Underrun error detected */
		stats->tx_fifo_errors++;
	}

	if (stat & ST1_CDCD)
		hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD),
				 port_to_dev(port));
}
开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:20，代码来源:hd6457x.c

示例9: c101_cleanup

static void __exit c101_cleanup(void)
{
	card_t *card = first_card;

	while (card) {
		card_t *ptr = card;
		card = card->next_card;
		unregister_hdlc_device(port_to_dev(ptr));
		c101_destroy_card(ptr);
	}
}
开发者ID:E-LLP，项目名称:n900，代码行数:11，代码来源:c101.c

示例10: sca_msci_intr

static void sca_msci_intr(port_t *port)
{
	u8 stat = sca_in(MSCI0_OFFSET + ST1, port); /* read MSCI ST1 status */

	/* Reset MSCI TX underrun and CDCD (ignored) status bit */
	sca_out(stat & (ST1_UDRN | ST1_CDCD), MSCI0_OFFSET + ST1, port);

	if (stat & ST1_UDRN) {
		/* TX Underrun error detected */
		port_to_dev(port)->stats.tx_errors++;
		port_to_dev(port)->stats.tx_fifo_errors++;
	}

	stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI1 ST1 status */
	/* Reset MSCI CDCD status bit - uses ch#2 DCD input */
	sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port);

	if (stat & ST1_CDCD)
		set_carrier(port);
}
开发者ID:E-LLP，项目名称:n900，代码行数:20，代码来源:c101.c

示例11: sca_rx

static inline void sca_rx(card_t *card, port_t *port, pkt_desc *desc, u16 rxin)
{
	struct net_device *dev = port_to_dev(port);
	struct net_device_stats *stats = hdlc_stats(dev);
	struct sk_buff *skb;
	u16 len;
	u32 buff;
#ifndef ALL_PAGES_ALWAYS_MAPPED
	u32 maxlen;
	u8 page;
#endif

	len = readw(&desc->len);
	skb = dev_alloc_skb(len);
	if (!skb) {
		stats->rx_dropped++;
		return;
	}

	buff = buffer_offset(port, rxin, 0);
#ifndef ALL_PAGES_ALWAYS_MAPPED
	page = buff / winsize(card);
	buff = buff % winsize(card);
	maxlen = winsize(card) - buff;

	openwin(card, page);

	if (len > maxlen) {
		memcpy_fromio(skb->data, winbase(card) + buff, maxlen);
		openwin(card, page + 1);
		memcpy_fromio(skb->data + maxlen, winbase(card), len - maxlen);
	} else
#endif
	memcpy_fromio(skb->data, winbase(card) + buff, len);

#if !defined(PAGE0_ALWAYS_MAPPED) && !defined(ALL_PAGES_ALWAYS_MAPPED)
	/* select pkt_desc table page back */
	openwin(card, 0);
#endif
	skb_put(skb, len);
#ifdef DEBUG_PKT
	printk(KERN_DEBUG "%s RX(%i):", dev->name, skb->len);
	debug_frame(skb);
#endif
	stats->rx_packets++;
	stats->rx_bytes += skb->len;
	skb->mac.raw = skb->data;
	skb->dev = dev;
	skb->dev->last_rx = jiffies;
	skb->protocol = hdlc_type_trans(skb, dev);
	netif_rx(skb);
}
开发者ID:wxlong，项目名称:Test，代码行数:52，代码来源:hd6457x.c

示例12: sca_rx_intr

/* Receive DMA interrupt service */
static inline void sca_rx_intr(port_t *port)
{
	struct net_device *dev = port_to_dev(port);
	u16 dmac = get_dmac_rx(port);
	card_t *card = port_to_card(port);
	u8 stat = sca_in(DSR_RX(phy_node(port)), card); /* read DMA Status */

	/* Reset DSR status bits */
	sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
		DSR_RX(phy_node(port)), card);

	if (stat & DSR_BOF)
		/* Dropped one or more frames */
		dev->stats.rx_over_errors++;

	while (1) {
		u32 desc_off = desc_offset(port, port->rxin, 0);
		pkt_desc __iomem *desc;
		u32 cda = sca_inw(dmac + CDAL, card);

		if ((cda >= desc_off) && (cda < desc_off + sizeof(pkt_desc)))
			break;	/* No frame received */

		desc = desc_address(port, port->rxin, 0);
		stat = readb(&desc->stat);
		if (!(stat & ST_RX_EOM))
			port->rxpart = 1; /* partial frame received */
		else if ((stat & ST_ERROR_MASK) || port->rxpart) {
			dev->stats.rx_errors++;
			if (stat & ST_RX_OVERRUN)
				dev->stats.rx_fifo_errors++;
			else if ((stat & (ST_RX_SHORT | ST_RX_ABORT |
					  ST_RX_RESBIT)) || port->rxpart)
				dev->stats.rx_frame_errors++;
			else if (stat & ST_RX_CRC)
				dev->stats.rx_crc_errors++;
			if (stat & ST_RX_EOM)
				port->rxpart = 0; /* received last fragment */
		} else
			sca_rx(card, port, desc, port->rxin);

		/* Set new error descriptor address */
		sca_outw(desc_off, dmac + EDAL, card);
		port->rxin = next_desc(port, port->rxin, 0);
	}

	/* make sure RX DMA is enabled */
	sca_out(DSR_DE, DSR_RX(phy_node(port)), card);
}
开发者ID:020gzh，项目名称:linux，代码行数:50，代码来源:hd64570.c

示例13: sca_rx_intr

static inline void sca_rx_intr(port_t *port)
{
    struct net_device *dev = port_to_dev(port);
    u16 dmac = get_dmac_rx(port);
    card_t *card = port_to_card(port);
    u8 stat = sca_in(DSR_RX(phy_node(port)), card);


    sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
            DSR_RX(phy_node(port)), card);

    if (stat & DSR_BOF)

        dev->stats.rx_over_errors++;

    while (1) {
        u32 desc_off = desc_offset(port, port->rxin, 0);
        pkt_desc __iomem *desc;
        u32 cda = sca_inw(dmac + CDAL, card);

        if ((cda >= desc_off) && (cda < desc_off + sizeof(pkt_desc)))
            break;

        desc = desc_address(port, port->rxin, 0);
        stat = readb(&desc->stat);
        if (!(stat & ST_RX_EOM))
            port->rxpart = 1;
        else if ((stat & ST_ERROR_MASK) || port->rxpart) {
            dev->stats.rx_errors++;
            if (stat & ST_RX_OVERRUN)
                dev->stats.rx_fifo_errors++;
            else if ((stat & (ST_RX_SHORT | ST_RX_ABORT |
                              ST_RX_RESBIT)) || port->rxpart)
                dev->stats.rx_frame_errors++;
            else if (stat & ST_RX_CRC)
                dev->stats.rx_crc_errors++;
            if (stat & ST_RX_EOM)
                port->rxpart = 0;
        } else
            sca_rx(card, port, desc, port->rxin);


        sca_outw(desc_off, dmac + EDAL, card);
        port->rxin = next_desc(port, port->rxin, 0);
    }


    sca_out(DSR_DE, DSR_RX(phy_node(port)), card);
}
开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:49，代码来源:hd64570.c

示例14: sca_rx

static inline void sca_rx(card_t *card, port_t *port, pkt_desc __iomem *desc,
                          u16 rxin)
{
    struct net_device *dev = port_to_dev(port);
    struct sk_buff *skb;
    u16 len;
    u32 buff;
    u32 maxlen;
    u8 page;

    len = readw(&desc->len);
    skb = dev_alloc_skb(len);
    if (!skb) {
        dev->stats.rx_dropped++;
        return;
    }

    buff = buffer_offset(port, rxin, 0);
    page = buff / winsize(card);
    buff = buff % winsize(card);
    maxlen = winsize(card) - buff;

    openwin(card, page);

    if (len > maxlen) {
        memcpy_fromio(skb->data, winbase(card) + buff, maxlen);
        openwin(card, page + 1);
        memcpy_fromio(skb->data + maxlen, winbase(card), len - maxlen);
    } else
        memcpy_fromio(skb->data, winbase(card) + buff, len);

#ifndef PAGE0_ALWAYS_MAPPED
    openwin(card, 0);
#endif
    skb_put(skb, len);
#ifdef DEBUG_PKT
    printk(KERN_DEBUG "%s RX(%i):", dev->name, skb->len);
    debug_frame(skb);
#endif
    dev->stats.rx_packets++;
    dev->stats.rx_bytes += skb->len;
    skb->protocol = hdlc_type_trans(skb, dev);
    netif_rx(skb);
}
开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:44，代码来源:hd64570.c

示例15: c101_run

static int __init c101_run(unsigned long irq, unsigned long winbase)
{
	struct net_device *dev;
	hdlc_device *hdlc;
	card_t *card;
	int result;

	if (irq<3 || irq>15 || irq == 6) /* FIXME */ {
		printk(KERN_ERR "c101: invalid IRQ value\n");
		return -ENODEV;
	}

	if (winbase < 0xC0000 || winbase > 0xDFFFF || (winbase & 0x3FFF) !=0) {
		printk(KERN_ERR "c101: invalid RAM value\n");
		return -ENODEV;
	}

	card = kzalloc(sizeof(card_t), GFP_KERNEL);
	if (card == NULL) {
		printk(KERN_ERR "c101: unable to allocate memory\n");
		return -ENOBUFS;
	}

	card->dev = alloc_hdlcdev(card);
	if (!card->dev) {
		printk(KERN_ERR "c101: unable to allocate memory\n");
		kfree(card);
		return -ENOBUFS;
	}

	if (request_irq(irq, sca_intr, 0, devname, card)) {
		printk(KERN_ERR "c101: could not allocate IRQ\n");
		c101_destroy_card(card);
		return -EBUSY;
	}
	card->irq = irq;

	if (!request_mem_region(winbase, C101_MAPPED_RAM_SIZE, devname)) {
		printk(KERN_ERR "c101: could not request RAM window\n");
		c101_destroy_card(card);
		return -EBUSY;
	}
	card->phy_winbase = winbase;
	card->win0base = ioremap(winbase, C101_MAPPED_RAM_SIZE);
	if (!card->win0base) {
		printk(KERN_ERR "c101: could not map I/O address\n");
		c101_destroy_card(card);
		return -EFAULT;
	}

	card->tx_ring_buffers = TX_RING_BUFFERS;
	card->rx_ring_buffers = RX_RING_BUFFERS;
	card->buff_offset = C101_WINDOW_SIZE; /* Bytes 1D00-1FFF reserved */

	readb(card->win0base + C101_PAGE); /* Resets SCA? */
	udelay(100);
	writeb(0, card->win0base + C101_PAGE);
	writeb(0, card->win0base + C101_DTR); /* Power-up for RAM? */

	sca_init(card, 0);

	dev = port_to_dev(card);
	hdlc = dev_to_hdlc(dev);

	spin_lock_init(&card->lock);
	dev->irq = irq;
	dev->mem_start = winbase;
	dev->mem_end = winbase + C101_MAPPED_RAM_SIZE - 1;
	dev->tx_queue_len = 50;
	dev->do_ioctl = c101_ioctl;
	dev->open = c101_open;
	dev->stop = c101_close;
	hdlc->attach = sca_attach;
	hdlc->xmit = sca_xmit;
	card->settings.clock_type = CLOCK_EXT;

	result = register_hdlc_device(dev);
	if (result) {
		printk(KERN_WARNING "c101: unable to register hdlc device\n");
		c101_destroy_card(card);
		return result;
	}

	sca_init_sync_port(card); /* Set up C101 memory */
	set_carrier(card);

	printk(KERN_INFO "%s: Moxa C101 on IRQ%u,"
	       " using %u TX + %u RX packets rings\n",
	       dev->name, card->irq,
	       card->tx_ring_buffers, card->rx_ring_buffers);

	*new_card = card;
	new_card = &card->next_card;
	return 0;
}
开发者ID:E-LLP，项目名称:n900，代码行数:95，代码来源:c101.c


注：本文中的port_to_dev函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。