当前位置: 首页>>代码示例>>C++>>正文


C++ pnp_find_dev函数代码示例

本文整理汇总了C++中pnp_find_dev函数的典型用法代码示例。如果您正苦于以下问题:C++ pnp_find_dev函数的具体用法?C++ pnp_find_dev怎么用?C++ pnp_find_dev使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了pnp_find_dev函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: isapnp_fmi_probe

static int __init isapnp_fmi_probe(void)
{
	int i = 0;

	while (id_table[i].card_vendor != 0 && dev == NULL) {
		dev = pnp_find_dev(NULL, id_table[i].vendor,
				   id_table[i].function, NULL);
		i++;
	}

	if (!dev)
		return -ENODEV;
	if (pnp_device_attach(dev) < 0)
		return -EAGAIN;
	if (pnp_activate_dev(dev) < 0) {
		printk(KERN_ERR "radio-sf16fmi: PnP configure failed (out of resources?)\n");
		pnp_device_detach(dev);
		return -ENOMEM;
	}
	if (!pnp_port_valid(dev, 0)) {
		pnp_device_detach(dev);
		return -ENODEV;
	}

	i = pnp_port_start(dev, 0);
	printk(KERN_INFO "radio-sf16fmi: PnP reports card at %#x\n", i);

	return i;
}
开发者ID:020gzh,项目名称:linux,代码行数:29,代码来源:radio-sf16fmi.c

示例2: ni_isapnp_find_board

static int ni_isapnp_find_board(struct pnp_dev **dev)
{
	struct pnp_dev *isapnp_dev = NULL;
	int i;

	for (i = 0; i < ARRAY_SIZE(ni_boards); i++) {
		isapnp_dev = pnp_find_dev(NULL,
					  ISAPNP_VENDOR('N', 'I', 'C'),
					  ISAPNP_FUNCTION(ni_boards[i].
							  isapnp_id), NULL);

		if (!isapnp_dev || !isapnp_dev->card)
			continue;

		if (pnp_device_attach(isapnp_dev) < 0)
			continue;

		if (pnp_activate_dev(isapnp_dev) < 0) {
			pnp_device_detach(isapnp_dev);
			return -EAGAIN;
		}

		if (!pnp_port_valid(isapnp_dev, 0) ||
		    !pnp_irq_valid(isapnp_dev, 0)) {
			pnp_device_detach(isapnp_dev);
			return -ENOMEM;
		}
		break;
	}
	if (i == ARRAY_SIZE(ni_boards))
		return -ENODEV;
	*dev = isapnp_dev;
	return 0;
}
开发者ID:19Dan01,项目名称:linux,代码行数:34,代码来源:ni_atmio.c

示例3: setup_sedlbauer_isapnp

static int __devinit
setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
{
	struct IsdnCardState *cs = card->cs;
	struct pnp_dev *pnp_d;

	if (!isapnp_present())
		return -1;

	while(ipid->card_vendor) {
		if ((pnp_c = pnp_find_card(ipid->card_vendor,
			ipid->card_device, pnp_c))) {
			pnp_d = NULL;
			if ((pnp_d = pnp_find_dev(pnp_c,
				ipid->vendor, ipid->function, pnp_d))) {
				int err;

				printk(KERN_INFO "HiSax: %s detected\n",
					(char *)ipid->driver_data);
				pnp_disable_dev(pnp_d);
				err = pnp_activate_dev(pnp_d);
				if (err<0) {
					printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
						__func__, err);
					return(0);
				}
				card->para[1] = pnp_port_start(pnp_d, 0);
				card->para[0] = pnp_irq(pnp_d, 0);

				if (!card->para[0] || !card->para[1]) {
					printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
						card->para[0], card->para[1]);
					pnp_disable_dev(pnp_d);
					return(0);
				}
				cs->hw.sedl.cfg_reg = card->para[1];
				cs->irq = card->para[0];
				if (ipid->function == ISAPNP_FUNCTION(0x2)) {
					cs->subtyp = SEDL_SPEED_FAX;
					cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
					*bytecnt = 16;
				} else {
					cs->subtyp = SEDL_SPEED_CARD_WIN;
					cs->hw.sedl.chip = SEDL_CHIP_TEST;
				}

				return (1);
			} else {
				printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
				return(0);
			}
		}
		ipid++;
		pnp_c = NULL;
	} 

	printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
	return -1;
}
开发者ID:458941968,项目名称:mini2440-kernel-2.6.29,代码行数:59,代码来源:sedlbauer.c

示例4: setup_asuscom

int __init
setup_asuscom(struct IsdnCard *card)
{
	char tmp[64];

	strcpy(tmp, Asuscom_revision);
	printk(KERN_INFO "HiSax: Asuscom ISDNLink driver Rev. %s\n", HiSax_getrev(tmp));
#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_card *pb;
		struct pnp_dev *pd;

		while(adev->card_vendor) {
			if ((pb = pnp_find_card(adev->card_vendor,
						adev->card_device,
						pnp_c))) {
				pnp_c = pb;
				pd = NULL;
				if ((pd = pnp_find_dev(pnp_c,
						       adev->vendor,
						       adev->function,
						       pd))) {
					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)adev->driver_data);
					if (pnp_device_attach(pd) < 0) {
						printk(KERN_ERR "AsusPnP: attach failed\n");
						return 0;
					}
					if (pnp_activate_dev(pd) < 0) {
						printk(KERN_ERR "AsusPnP: activate failed\n");
						pnp_device_detach(pd);
						return 0;
					}
					if (!pnp_irq_valid(pd, 0) || !pnp_port_valid(pd, 0)) {
						printk(KERN_ERR "AsusPnP:some resources are missing %ld/%lx\n",
							pnp_irq(pd, 0), pnp_port_start(pd, 0));
						pnp_device_detach(pd);
						return(0);
					}
					card->para[1] = pnp_port_start(pd, 0);
					card->para[0] = pnp_irq(pd, 0);
					break;
				} else {
					printk(KERN_ERR "AsusPnP: PnP error card found, no device\n");
				}
			}
			adev++;
			pnp_c=NULL;
		} 
		if (!adev->card_vendor) {
			printk(KERN_INFO "AsusPnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	if (asuscom_probe(card->cs, card) < 0)
		return 0;
	return 1;
}
开发者ID:sarnobat,项目名称:knoppix,代码行数:59,代码来源:asuscom.c

示例5: ni_isapnp_find_board

static int ni_isapnp_find_board(struct pnp_dev **dev)
{
	struct pnp_dev *isapnp_dev = NULL;
	int i;

	for (i = 0; i < n_ni_boards; i++) {
		isapnp_dev = pnp_find_dev(NULL,
					  ISAPNP_VENDOR('N', 'I', 'C'),
					  ISAPNP_FUNCTION(ni_boards[i].
							  isapnp_id), NULL);

		if (isapnp_dev == NULL || isapnp_dev->card == NULL)
			continue;

		if (pnp_device_attach(isapnp_dev) < 0) {
			printk
			 ("ni_atmio: %s found but already active, skipping.\n",
			  ni_boards[i].name);
			continue;
		}
		if (pnp_activate_dev(isapnp_dev) < 0) {
			pnp_device_detach(isapnp_dev);
			return -EAGAIN;
		}
		if (!pnp_port_valid(isapnp_dev, 0)
		    || !pnp_irq_valid(isapnp_dev, 0)) {
			pnp_device_detach(isapnp_dev);
			printk("ni_atmio: pnp invalid port or irq, aborting\n");
			return -ENOMEM;
		}
		break;
	}
	if (i == n_ni_boards)
		return -ENODEV;
	*dev = isapnp_dev;
	return 0;
}
开发者ID:0xroot,项目名称:Blackphone-BP1-Kernel,代码行数:37,代码来源:ni_atmio.c

示例6: setup_ix1micro

int __devinit
setup_ix1micro(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
	printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_dev *pnp_d;
		while(ipid->card_vendor) {
			if ((pnp_c = pnp_find_card(ipid->card_vendor,
				ipid->card_device, pnp_c))) {
				pnp_d = NULL;
				if ((pnp_d = pnp_find_dev(pnp_c,
					ipid->vendor, ipid->function, pnp_d))) {
					int err;

					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)ipid->driver_data);
					pnp_disable_dev(pnp_d);
					err = pnp_activate_dev(pnp_d);
					if (err<0) {
						printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
							__FUNCTION__, err);
						return(0);
					}
					card->para[1] = pnp_port_start(pnp_d, 0);
					card->para[0] = pnp_irq(pnp_d, 0);
					if (!card->para[0] || !card->para[1]) {
						printk(KERN_ERR "ITK PnP:some resources are missing %ld/%lx\n",
							card->para[0], card->para[1]);
						pnp_disable_dev(pnp_d);
						return(0);
					}
					break;
				} else {
					printk(KERN_ERR "ITK PnP: PnP error card found, no device\n");
				}
			}
			ipid++;
			pnp_c = NULL;
		} 
		if (!ipid->card_vendor) {
			printk(KERN_INFO "ITK PnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
			printk(KERN_WARNING
			  "HiSax: %s config port %x-%x already in use\n",
			       CardType[card->typ],
			       cs->hw.ix1.cfg_reg,
			       cs->hw.ix1.cfg_reg + 4);
			return (0);
		}
	}
	printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
		CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
		printk(KERN_WARNING
		    "ix1-Micro: wrong HSCX versions check IO address\n");
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}
开发者ID:ManiacTwister,项目名称:linux-hnd,代码行数:91,代码来源:ix1_micro.c

示例7: setup_diva_isapnp

static int setup_diva_isapnp(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	struct pnp_dev *pnp_d;

	if (!isapnp_present())
		return (-1);	/* card not found; continue search */

	while (ipid->card_vendor) {
		if ((pnp_c = pnp_find_card(ipid->card_vendor,
					   ipid->card_device, pnp_c))) {
			pnp_d = NULL;
			if ((pnp_d = pnp_find_dev(pnp_c,
						  ipid->vendor, ipid->function, pnp_d))) {
				int err;

				printk(KERN_INFO "HiSax: %s detected\n",
				       (char *)ipid->driver_data);
				pnp_disable_dev(pnp_d);
				err = pnp_activate_dev(pnp_d);
				if (err < 0) {
					printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
					       __func__, err);
					return (0);
				}
				card->para[1] = pnp_port_start(pnp_d, 0);
				card->para[0] = pnp_irq(pnp_d, 0);
				if (!card->para[0] || !card->para[1]) {
					printk(KERN_ERR "Diva PnP:some resources are missing %ld/%lx\n",
					       card->para[0], card->para[1]);
					pnp_disable_dev(pnp_d);
					return (0);
				}
				cs->hw.diva.cfg_reg  = card->para[1];
				cs->irq = card->para[0];
				if (ipid->function == ISAPNP_FUNCTION(0xA1)) {
					cs->subtyp = DIVA_IPAC_ISA;
					cs->hw.diva.ctrl = 0;
					cs->hw.diva.isac =
						card->para[1] + DIVA_IPAC_DATA;
					cs->hw.diva.hscx =
						card->para[1] + DIVA_IPAC_DATA;
					cs->hw.diva.isac_adr =
						card->para[1] + DIVA_IPAC_ADR;
					cs->hw.diva.hscx_adr =
						card->para[1] + DIVA_IPAC_ADR;
					test_and_set_bit(HW_IPAC, &cs->HW_Flags);
				} else {
					cs->subtyp = DIVA_ISA;
					cs->hw.diva.ctrl =
						card->para[1] + DIVA_ISA_CTRL;
					cs->hw.diva.isac =
						card->para[1] + DIVA_ISA_ISAC_DATA;
					cs->hw.diva.hscx =
						card->para[1] + DIVA_HSCX_DATA;
					cs->hw.diva.isac_adr =
						card->para[1] + DIVA_ISA_ISAC_ADR;
					cs->hw.diva.hscx_adr =
						card->para[1] + DIVA_HSCX_ADR;
				}
				return (1);		/* card found */
			} else {
				printk(KERN_ERR "Diva PnP: PnP error card found, no device\n");
				return (0);
			}
		}
		ipid++;
		pnp_c = NULL;
	}

	return (-1);	/* card not found; continue search */
}
开发者ID:asmalldev,项目名称:linux,代码行数:72,代码来源:diva.c

示例8: setup_isurf

int __devinit
setup_isurf(struct IsdnCard *card)
{
	int ver;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ISurf_revision);
	printk(KERN_INFO "HiSax: ISurf driver Rev. %s\n", HiSax_getrev(tmp));
	
 	if (cs->typ != ISDN_CTYPE_ISURF)
 		return(0);
	if (card->para[1] && card->para[2]) {
		cs->hw.isurf.reset = card->para[1];
		cs->hw.isurf.phymem = card->para[2];
		cs->irq = card->para[0];
	} else {
#ifdef __ISAPNP__
		if (isapnp_present()) {
			struct pnp_dev *pnp_d = NULL;
			int err;

			cs->subtyp = 0;
			if ((pnp_c = pnp_find_card(
				ISAPNP_VENDOR('S', 'I', 'E'),
				ISAPNP_FUNCTION(0x0010), pnp_c))) {
				if (!(pnp_d = pnp_find_dev(pnp_c,
					ISAPNP_VENDOR('S', 'I', 'E'),
					ISAPNP_FUNCTION(0x0010), pnp_d))) {
					printk(KERN_ERR "ISurfPnP: PnP error card found, no device\n");
					return (0);
				}
				pnp_disable_dev(pnp_d);
				err = pnp_activate_dev(pnp_d);
				cs->hw.isurf.reset = pnp_port_start(pnp_d, 0);
				cs->hw.isurf.phymem = pnp_mem_start(pnp_d, 1);
				cs->irq = pnp_irq(pnp_d, 0);
				if (!cs->irq || !cs->hw.isurf.reset || !cs->hw.isurf.phymem) {
					printk(KERN_ERR "ISurfPnP:some resources are missing %d/%x/%lx\n",
						cs->irq, cs->hw.isurf.reset, cs->hw.isurf.phymem);
					pnp_disable_dev(pnp_d);
					return(0);
				}
			} else {
				printk(KERN_INFO "ISurfPnP: no ISAPnP card found\n");
				return(0);
			}
		} else {
			printk(KERN_INFO "ISurfPnP: no ISAPnP bus found\n");
			return(0);
		}
#else
		printk(KERN_WARNING "HiSax: Siemens I-Surf port/mem not set\n");
		return (0);
#endif
	}
	if (!request_region(cs->hw.isurf.reset, 1, "isurf isdn")) {
		printk(KERN_WARNING
			"HiSax: Siemens I-Surf config port %x already in use\n",
			cs->hw.isurf.reset);
			return (0);
	}
	if (!request_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE, "isurf iomem")) {
		printk(KERN_WARNING "HiSax: Siemens I-Surf memory region "
			"%lx-%lx already in use\n",
			cs->hw.isurf.phymem,
			cs->hw.isurf.phymem + ISURF_IOMEM_SIZE);
		release_region(cs->hw.isurf.reset, 1);
		return (0);
	}
	cs->hw.isurf.isar = ioremap(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE);
	cs->hw.isurf.isac = cs->hw.isurf.isar + ISURF_ISAC_OFFSET;
	printk(KERN_INFO
	       "ISurf: defined at 0x%x 0x%lx IRQ %d\n",
	       cs->hw.isurf.reset,
	       cs->hw.isurf.phymem,
	       cs->irq);

	setup_isac(cs);
	cs->cardmsg = &ISurf_card_msg;
	cs->irq_func = &isurf_interrupt;
	cs->auxcmd = &isurf_auxcmd;
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->bcs[0].hw.isar.reg = &cs->hw.isurf.isar_r;
	cs->bcs[1].hw.isar.reg = &cs->hw.isurf.isar_r;
	test_and_set_bit(HW_ISAR, &cs->HW_Flags);
	ISACVersion(cs, "ISurf:");
	cs->BC_Read_Reg = &ReadISAR;
	cs->BC_Write_Reg = &WriteISAR;
	cs->BC_Send_Data = &isar_fill_fifo;
	ver = ISARVersion(cs, "ISurf:");
	if (ver < 0) {
		printk(KERN_WARNING
			"ISurf: wrong ISAR version (ret = %d)\n", ver);
		release_io_isurf(cs);
		return (0);
	}
//.........这里部分代码省略.........
开发者ID:robacklin,项目名称:ts4700,代码行数:101,代码来源:isurf.c

示例9: setup_niccy

int __init
setup_niccy(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, niccy_revision);
	printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_NICCY)
		return (0);
#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_dev *pnp_d = NULL;
		int err;

		if ((pnp_c = pnp_find_card(
			ISAPNP_VENDOR('S', 'D', 'A'),
			ISAPNP_FUNCTION(0x0150), pnp_c))) {
			if (!(pnp_d = pnp_find_dev(pnp_c,
				ISAPNP_VENDOR('S', 'D', 'A'),
				ISAPNP_FUNCTION(0x0150), pnp_d))) {
				printk(KERN_ERR "NiccyPnP: PnP error card found, no device\n");
				return (0);
			}
			pnp_disable_dev(pnp_d);
			err = pnp_activate_dev(pnp_d);
			if (err<0) {
				printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
					__FUNCTION__, err);
				return(0);
			}
			card->para[1] = pnp_port_start(pnp_d, 0);
			card->para[2] = pnp_port_start(pnp_d, 1);
			card->para[0] = pnp_irq(pnp_d, 0);
			if (!card->para[0] || !card->para[1] || !card->para[2]) {
				printk(KERN_ERR "NiccyPnP:some resources are missing %ld/%lx/%lx\n",
					card->para[0], card->para[1], card->para[2]);
				pnp_disable_dev(pnp_d);
				return(0);
			}
		} else {
			printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n");
		}
	}
#endif
	if (card->para[1]) {
		cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
		cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
		cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
		cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
		cs->hw.niccy.cfg_reg = 0;
		cs->subtyp = NICCY_PNP;
		cs->irq = card->para[0];
		if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
			printk(KERN_WARNING
				"HiSax: %s data port %x-%x already in use\n",
				CardType[card->typ],
				cs->hw.niccy.isac,
				cs->hw.niccy.isac + 1);
			return (0);
		}
		if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
			printk(KERN_WARNING
				"HiSax: %s address port %x-%x already in use\n",
				CardType[card->typ],
				cs->hw.niccy.isac_ale,
				cs->hw.niccy.isac_ale + 1);
			release_region(cs->hw.niccy.isac, 2);
			return (0);
		}
	} else {
#ifdef CONFIG_PCI
		u_int pci_ioaddr;
		cs->subtyp = 0;
		if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM,
			PCI_DEVICE_ID_SATSAGEM_NICCY, niccy_dev))) {
			if (pci_enable_device(niccy_dev))
				return(0);
			/* get IRQ */
			if (!niccy_dev->irq) {
				printk(KERN_WARNING "Niccy: No IRQ for PCI card found\n");
				return(0);
			}
			cs->irq = niccy_dev->irq;
			cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
			if (!cs->hw.niccy.cfg_reg) {
				printk(KERN_WARNING "Niccy: No IO-Adr for PCI cfg found\n");
				return(0);
			}
			pci_ioaddr = pci_resource_start(niccy_dev, 1);
			if (!pci_ioaddr) {
				printk(KERN_WARNING "Niccy: No IO-Adr for PCI card found\n");
				return(0);
			}
			cs->subtyp = NICCY_PCI;
		} else {
			printk(KERN_WARNING "Niccy: No PCI card found\n");
			return(0);
		}
		cs->irq_flags |= SA_SHIRQ;
//.........这里部分代码省略.........
开发者ID:BackupTheBerlios,项目名称:tew632-brp-svn,代码行数:101,代码来源:niccy.c

示例10: setup_sedlbauer

int __devinit
setup_sedlbauer(struct IsdnCard *card)
{
	int bytecnt, ver, val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];
	u16 sub_vendor_id, sub_id;

	strcpy(tmp, Sedlbauer_revision);
	printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
	
 	if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
 		cs->subtyp = SEDL_SPEED_CARD_WIN;
		cs->hw.sedl.bus = SEDL_BUS_ISA;
		cs->hw.sedl.chip = SEDL_CHIP_TEST;
 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {	
 		cs->subtyp = SEDL_SPEED_STAR;
		cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
		cs->hw.sedl.chip = SEDL_CHIP_TEST;
 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {	
 		cs->subtyp = SEDL_SPEED_FAX;
		cs->hw.sedl.bus = SEDL_BUS_ISA;
		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
 	} else
		return (0);

	bytecnt = 8;
	if (card->para[1]) {
		cs->hw.sedl.cfg_reg = card->para[1];
		cs->irq = card->para[0];
		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
			bytecnt = 16;
		}
	} else {
#ifdef __ISAPNP__
		if (isapnp_present()) {
			struct pnp_dev *pnp_d;
			while(ipid->card_vendor) {
				if ((pnp_c = pnp_find_card(ipid->card_vendor,
					ipid->card_device, pnp_c))) {
					pnp_d = NULL;
					if ((pnp_d = pnp_find_dev(pnp_c,
						ipid->vendor, ipid->function, pnp_d))) {
						int err;

						printk(KERN_INFO "HiSax: %s detected\n",
							(char *)ipid->driver_data);
						pnp_disable_dev(pnp_d);
						err = pnp_activate_dev(pnp_d);
						if (err<0) {
							printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
								__FUNCTION__, err);
							return(0);
						}
						card->para[1] = pnp_port_start(pnp_d, 0);
						card->para[0] = pnp_irq(pnp_d, 0);

						if (!card->para[0] || !card->para[1]) {
							printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
								card->para[0], card->para[1]);
							pnp_disable_dev(pnp_d);
							return(0);
						}
						cs->hw.sedl.cfg_reg = card->para[1];
						cs->irq = card->para[0];
						if (ipid->function == ISAPNP_FUNCTION(0x2)) {
							cs->subtyp = SEDL_SPEED_FAX;
							cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
							bytecnt = 16;
						} else {
							cs->subtyp = SEDL_SPEED_CARD_WIN;
							cs->hw.sedl.chip = SEDL_CHIP_TEST;
						}
						goto ready;
					} else {
						printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
						return(0);
					}
				}
				ipid++;
				pnp_c = NULL;
			} 
			if (!ipid->card_vendor) {
				printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
			}
		}
#endif
/* Probe for Sedlbauer speed pci */
#ifdef CONFIG_PCI
		if ((dev_sedl = pci_find_device(PCI_VENDOR_ID_TIGERJET,
				PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
			if (pci_enable_device(dev_sedl))
				return(0);
			cs->irq = dev_sedl->irq;
			if (!cs->irq) {
				printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
				return(0);
			}
			cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
		} else {
//.........这里部分代码省略.........
开发者ID:robacklin,项目名称:ts7800,代码行数:101,代码来源:sedlbauer.c

示例11: setup_ix1micro

int __devinit
setup_ix1micro(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
;
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_dev *pnp_d;
		while(ipid->card_vendor) {
			if ((pnp_c = pnp_find_card(ipid->card_vendor,
				ipid->card_device, pnp_c))) {
				pnp_d = NULL;
				if ((pnp_d = pnp_find_dev(pnp_c,
					ipid->vendor, ipid->function, pnp_d))) {
					int err;

//					printk(KERN_INFO "HiSax: %s detected\n",
;
					pnp_disable_dev(pnp_d);
					err = pnp_activate_dev(pnp_d);
					if (err<0) {
//						printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
;
						return(0);
					}
					card->para[1] = pnp_port_start(pnp_d, 0);
					card->para[0] = pnp_irq(pnp_d, 0);
					if (!card->para[0] || !card->para[1]) {
//						printk(KERN_ERR "ITK PnP:some resources are missing %ld/%lx\n",
;
						pnp_disable_dev(pnp_d);
						return(0);
					}
					break;
				} else {
;
				}
			}
			ipid++;
			pnp_c = NULL;
		} 
		if (!ipid->card_vendor) {
;
			return(0);
		}
	}
#endif
	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
//			printk(KERN_WARNING
//			  "HiSax: ITK ix1-micro Rev.2 config port "
//			  "%x-%x already in use\n",
//			       cs->hw.ix1.cfg_reg,
;
			return (0);
		}
	}
//	printk(KERN_INFO "HiSax: ITK ix1-micro Rev.2 config irq:%d io:0x%X\n",
;
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
//		printk(KERN_WARNING
;
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}
开发者ID:rrowicki,项目名称:Chrono_Kernel-1,代码行数:91,代码来源:ix1_micro.c

示例12: setup_asuscom

int __init
setup_asuscom(struct IsdnCard *card)
{
    int bytecnt;
    struct IsdnCardState *cs = card->cs;
    u_char val;
    char tmp[64];

    strcpy(tmp, Asuscom_revision);
    printk(KERN_INFO "HiSax: Asuscom ISDNLink driver Rev. %s\n", HiSax_getrev(tmp));
    if (cs->typ != ISDN_CTYPE_ASUSCOM)
        return (0);
#ifdef __ISAPNP__
    if (!card->para[1] && isapnp_present()) {
        struct pnp_dev *pnp_d;
        while(ipid->card_vendor) {
            if ((pnp_c = pnp_find_card(ipid->card_vendor,
                                       ipid->card_device, pnp_c))) {
                pnp_d = NULL;
                if ((pnp_d = pnp_find_dev(pnp_c,
                                          ipid->vendor, ipid->function, pnp_d))) {
                    int err;

                    printk(KERN_INFO "HiSax: %s detected\n",
                           (char *)ipid->driver_data);
                    pnp_disable_dev(pnp_d);
                    err = pnp_activate_dev(pnp_d);
                    if (err<0) {
                        printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
                               __FUNCTION__, err);
                        return(0);
                    }
                    card->para[1] = pnp_port_start(pnp_d, 0);
                    card->para[0] = pnp_irq(pnp_d, 0);
                    if (!card->para[0] || !card->para[1]) {
                        printk(KERN_ERR "AsusPnP:some resources are missing %ld/%lx\n",
                               card->para[0], card->para[1]);
                        pnp_disable_dev(pnp_d);
                        return(0);
                    }
                    break;
                } else {
                    printk(KERN_ERR "AsusPnP: PnP error card found, no device\n");
                }
            }
            ipid++;
            pnp_c = NULL;
        }
        if (!ipid->card_vendor) {
            printk(KERN_INFO "AsusPnP: no ISAPnP card found\n");
            return(0);
        }
    }
#endif
    bytecnt = 8;
    cs->hw.asus.cfg_reg = card->para[1];
    cs->irq = card->para[0];
    if (!request_region(cs->hw.asus.cfg_reg, bytecnt, "asuscom isdn")) {
        printk(KERN_WARNING
               "HiSax: %s config port %x-%x already in use\n",
               CardType[card->typ],
               cs->hw.asus.cfg_reg,
               cs->hw.asus.cfg_reg + bytecnt);
        return (0);
    }
    printk(KERN_INFO "ISDNLink: defined at 0x%x IRQ %d\n",
           cs->hw.asus.cfg_reg, cs->irq);
    setup_isac(cs);
    cs->BC_Read_Reg = &ReadHSCX;
    cs->BC_Write_Reg = &WriteHSCX;
    cs->BC_Send_Data = &hscx_fill_fifo;
    cs->cardmsg = &Asus_card_msg;
    val = readreg(cs->hw.asus.cfg_reg + ASUS_IPAC_ALE,
                  cs->hw.asus.cfg_reg + ASUS_IPAC_DATA, IPAC_ID);
    if ((val == 1) || (val == 2)) {
        cs->subtyp = ASUS_IPAC;
        cs->hw.asus.adr  = cs->hw.asus.cfg_reg + ASUS_IPAC_ALE;
        cs->hw.asus.isac = cs->hw.asus.cfg_reg + ASUS_IPAC_DATA;
        cs->hw.asus.hscx = cs->hw.asus.cfg_reg + ASUS_IPAC_DATA;
        test_and_set_bit(HW_IPAC, &cs->HW_Flags);
        cs->readisac = &ReadISAC_IPAC;
        cs->writeisac = &WriteISAC_IPAC;
        cs->readisacfifo = &ReadISACfifo_IPAC;
        cs->writeisacfifo = &WriteISACfifo_IPAC;
        cs->irq_func = &asuscom_interrupt_ipac;
        printk(KERN_INFO "Asus: IPAC version %x\n", val);
    } else {
        cs->subtyp = ASUS_ISACHSCX;
        cs->hw.asus.adr = cs->hw.asus.cfg_reg + ASUS_ADR;
        cs->hw.asus.isac = cs->hw.asus.cfg_reg + ASUS_ISAC;
        cs->hw.asus.hscx = cs->hw.asus.cfg_reg + ASUS_HSCX;
        cs->hw.asus.u7 = cs->hw.asus.cfg_reg + ASUS_CTRL_U7;
        cs->hw.asus.pots = cs->hw.asus.cfg_reg + ASUS_CTRL_POTS;
        cs->readisac = &ReadISAC;
        cs->writeisac = &WriteISAC;
        cs->readisacfifo = &ReadISACfifo;
        cs->writeisacfifo = &WriteISACfifo;
        cs->irq_func = &asuscom_interrupt;
        ISACVersion(cs, "ISDNLink:");
        if (HscxVersion(cs, "ISDNLink:")) {
//.........这里部分代码省略.........
开发者ID:BackupTheBerlios,项目名称:tew632-brp-svn,代码行数:101,代码来源:asuscom.c

示例13: setup_teles3

int __devinit
setup_teles3(struct IsdnCard *card)
{
	char tmp[64];

	strcpy(tmp, teles3_revision);
	printk(KERN_INFO "HiSax: Teles IO driver Rev. %s\n", HiSax_getrev(tmp));
#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_card *pnp_card;
		struct pnp_dev *pnp_dev;

		while(tdev->card_vendor) {
			if ((pnp_card = pnp_find_card(tdev->card_vendor,
						      tdev->card_device, pnp_c))) {
				pnp_c = pnp_card;
				pnp_dev = NULL;
				if ((pnp_dev = pnp_find_dev(pnp_card,
							    tdev->vendor,
							    tdev->function,
							    pnp_dev))) {
					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)tdev->driver_data);
					if (pnp_device_attach(pnp_dev) < 0) {
						printk(KERN_ERR "Teles PnP: attach failed\n");
						return 0;
					}
					if (pnp_activate_dev(pnp_dev) < 0) {
						printk(KERN_ERR "Teles PnP: activate failed\n");
						pnp_device_detach(pnp_dev);
						return 0;
					}
					if (!pnp_irq_valid(pnp_dev, 0) ||
					    !pnp_port_valid(pnp_dev, 0) ||
					    !pnp_port_valid(pnp_dev, 1)) {
						printk(KERN_ERR "Teles PnP: some resources are missing %ld/%lx/%lx\n",
							pnp_irq(pnp_dev, 0), pnp_port_start(pnp_dev, 0), pnp_port_start(pnp_dev, 1));
						pnp_device_detach(pnp_dev);
						return 0;
					}
					card->para[3] = pnp_port_start(pnp_dev, 2);
					card->para[2] = pnp_port_start(pnp_dev, 1);
					card->para[1] = pnp_port_start(pnp_dev, 0);
					card->para[0] = pnp_irq(pnp_dev, 0);
					break;
				} else {
					printk(KERN_ERR "Teles PnP: PnP error card found, no device\n");
				}
			}
			tdev++;
			pnp_c=NULL;
		} 
		if (!tdev->card_vendor) {
			printk(KERN_INFO "Teles PnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	if (card->cs->typ == ISDN_CTYPE_16_3) {
		if (teles16_3_probe(card->cs, card) < 0)
			return 0;
	} else if (card->cs->typ == ISDN_CTYPE_TELESPCMCIA) {
		if (telespcmcia_probe(card->cs, card) < 0)
			return 0;
	} else if (card->cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
		if (compaq_probe(card->cs, card) < 0)
			return 0;
	} else {	/* PNP */
		if (telespnp_probe(card->cs, card) < 0)
			return 0;
	}
	return 1;
}
开发者ID:xricson,项目名称:knoppix,代码行数:73,代码来源:teles3.c

示例14: setup_diva

int __init
setup_diva(struct IsdnCard *card)
{
	int bytecnt = 8;
	u_char val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, Diva_revision);
	printk(KERN_INFO "HiSax: Eicon.Diehl Diva driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_DIEHLDIVA)
		return(0);
	cs->hw.diva.status = 0;
	if (card->para[1]) {
		cs->hw.diva.ctrl_reg = 0;
		cs->hw.diva.cfg_reg = card->para[1];
		val = readreg(cs->hw.diva.cfg_reg + DIVA_IPAC_ADR,
			cs->hw.diva.cfg_reg + DIVA_IPAC_DATA, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
		if ((val == 1) || (val==2)) {
			cs->subtyp = DIVA_IPAC_ISA;
			cs->hw.diva.ctrl = 0;
			cs->hw.diva.isac = card->para[1] + DIVA_IPAC_DATA;
			cs->hw.diva.hscx = card->para[1] + DIVA_IPAC_DATA;
			cs->hw.diva.isac_adr = card->para[1] + DIVA_IPAC_ADR;
			cs->hw.diva.hscx_adr = card->para[1] + DIVA_IPAC_ADR;
			test_and_set_bit(HW_IPAC, &cs->HW_Flags);
		} else {
			cs->subtyp = DIVA_ISA;
			cs->hw.diva.ctrl = card->para[1] + DIVA_ISA_CTRL;
			cs->hw.diva.isac = card->para[1] + DIVA_ISA_ISAC_DATA;
			cs->hw.diva.hscx = card->para[1] + DIVA_HSCX_DATA;
			cs->hw.diva.isac_adr = card->para[1] + DIVA_ISA_ISAC_ADR;
			cs->hw.diva.hscx_adr = card->para[1] + DIVA_HSCX_ADR;
		}
		cs->irq = card->para[0];
	} else {
#ifdef __ISAPNP__
		if (isapnp_present()) {
			struct pnp_dev *pnp_d;
			while(ipid->card_vendor) {
				if ((pnp_c = pnp_find_card(ipid->card_vendor,
					ipid->card_device, pnp_c))) {
					pnp_d = NULL;
					if ((pnp_d = pnp_find_dev(pnp_c,
						ipid->vendor, ipid->function, pnp_d))) {
						int err;

						printk(KERN_INFO "HiSax: %s detected\n",
							(char *)ipid->driver_data);
						pnp_disable_dev(pnp_d);
						err = pnp_activate_dev(pnp_d);
						if (err<0) {
							printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
								__FUNCTION__, err);
							return(0);
						}
						card->para[1] = pnp_port_start(pnp_d, 0);
						card->para[0] = pnp_irq(pnp_d, 0);
						if (!card->para[0] || !card->para[1]) {
							printk(KERN_ERR "Diva PnP:some resources are missing %ld/%lx\n",
								card->para[0], card->para[1]);
							pnp_disable_dev(pnp_d); 
							return(0);
						}
						cs->hw.diva.cfg_reg  = card->para[1];
						cs->irq = card->para[0];
						if (ipid->function == ISAPNP_FUNCTION(0xA1)) {
							cs->subtyp = DIVA_IPAC_ISA;
							cs->hw.diva.ctrl = 0;
							cs->hw.diva.isac =
								card->para[1] + DIVA_IPAC_DATA;
							cs->hw.diva.hscx =
								card->para[1] + DIVA_IPAC_DATA;
							cs->hw.diva.isac_adr =
								card->para[1] + DIVA_IPAC_ADR;
							cs->hw.diva.hscx_adr =
								card->para[1] + DIVA_IPAC_ADR;
							test_and_set_bit(HW_IPAC, &cs->HW_Flags);
						} else {
							cs->subtyp = DIVA_ISA;
							cs->hw.diva.ctrl =
								card->para[1] + DIVA_ISA_CTRL;
							cs->hw.diva.isac =
								card->para[1] + DIVA_ISA_ISAC_DATA;
							cs->hw.diva.hscx =
								card->para[1] + DIVA_HSCX_DATA;
							cs->hw.diva.isac_adr =
								card->para[1] + DIVA_ISA_ISAC_ADR;
							cs->hw.diva.hscx_adr =
								card->para[1] + DIVA_HSCX_ADR;
						}
						goto ready;
					} else {
						printk(KERN_ERR "Diva PnP: PnP error card found, no device\n");
						return(0);
					}
				}
				ipid++;
				pnp_c=NULL;
//.........这里部分代码省略.........
开发者ID:jameshilliard,项目名称:actiontec_opensrc_mi424wr-rev-e-f_fw-20-10-7-5,代码行数:101,代码来源:diva.c

示例15: setup_teles3

int __devinit
setup_teles3(struct IsdnCard *card)
{
	u_char val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, teles3_revision);
	printk(KERN_INFO "HiSax: Teles IO driver Rev. %s\n", HiSax_getrev(tmp));
	if ((cs->typ != ISDN_CTYPE_16_3) && (cs->typ != ISDN_CTYPE_PNP)
	    && (cs->typ != ISDN_CTYPE_TELESPCMCIA) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA))
		return (0);

#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_dev *pnp_d;
		while(ipid->card_vendor) {
			if ((pnp_c = pnp_find_card(ipid->card_vendor,
				ipid->card_device, pnp_c))) {
				pnp_d = NULL;
				if ((pnp_d = pnp_find_dev(pnp_c,
					ipid->vendor, ipid->function, pnp_d))) {
					int err;

					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)ipid->driver_data);
					pnp_disable_dev(pnp_d);
					err = pnp_activate_dev(pnp_d);
					if (err<0) {
						printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
							__FUNCTION__, err);
						return(0);
					}
					card->para[3] = pnp_port_start(pnp_d, 2);
					card->para[2] = pnp_port_start(pnp_d, 1);
					card->para[1] = pnp_port_start(pnp_d, 0);
					card->para[0] = pnp_irq(pnp_d, 0);
					if (!card->para[0] || !card->para[1] || !card->para[2]) {
						printk(KERN_ERR "Teles PnP:some resources are missing %ld/%lx/%lx\n",
							card->para[0], card->para[1], card->para[2]);
						pnp_disable_dev(pnp_d);
						return(0);
					}
					break;
				} else {
					printk(KERN_ERR "Teles PnP: PnP error card found, no device\n");
				}
			}
			ipid++;
			pnp_c = NULL;
		} 
		if (!ipid->card_vendor) {
			printk(KERN_INFO "Teles PnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	if (cs->typ == ISDN_CTYPE_16_3) {
		cs->hw.teles3.cfg_reg = card->para[1];
		switch (cs->hw.teles3.cfg_reg) {
			case 0x180:
			case 0x280:
			case 0x380:
				cs->hw.teles3.cfg_reg |= 0xc00;
				break;
		}
		cs->hw.teles3.isac = cs->hw.teles3.cfg_reg - 0x420;
		cs->hw.teles3.hscx[0] = cs->hw.teles3.cfg_reg - 0xc20;
		cs->hw.teles3.hscx[1] = cs->hw.teles3.cfg_reg - 0x820;
	} else if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
		cs->hw.teles3.cfg_reg = 0;
		cs->hw.teles3.hscx[0] = card->para[1] - 0x20;
		cs->hw.teles3.hscx[1] = card->para[1];
		cs->hw.teles3.isac = card->para[1] + 0x20;
	} else if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
		cs->hw.teles3.cfg_reg = card->para[3];
		cs->hw.teles3.isac = card->para[2] - 32;
		cs->hw.teles3.hscx[0] = card->para[1] - 32;
		cs->hw.teles3.hscx[1] = card->para[1];
	} else {	/* PNP */
		cs->hw.teles3.cfg_reg = 0;
		cs->hw.teles3.isac = card->para[1] - 32;
		cs->hw.teles3.hscx[0] = card->para[2] - 32;
		cs->hw.teles3.hscx[1] = card->para[2];
	}
	cs->irq = card->para[0];
	cs->hw.teles3.isacfifo = cs->hw.teles3.isac + 0x3e;
	cs->hw.teles3.hscxfifo[0] = cs->hw.teles3.hscx[0] + 0x3e;
	cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
	if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
		if (!request_region(cs->hw.teles3.hscx[1], 96, "HiSax Teles PCMCIA")) {
			printk(KERN_WARNING
			       "HiSax: %s ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.hscx[1],
			       cs->hw.teles3.hscx[1] + 96);
			return (0);
		}
	} else {
		if (cs->hw.teles3.cfg_reg) {
//.........这里部分代码省略.........
开发者ID:BackupTheBerlios,项目名称:tew632-brp-svn,代码行数:101,代码来源:teles3.c


注:本文中的pnp_find_dev函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。