本文整理汇总了C++中pnp_disable_dev函数的典型用法代码示例。如果您正苦于以下问题:C++ pnp_disable_dev函数的具体用法?C++ pnp_disable_dev怎么用?C++ pnp_disable_dev使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了pnp_disable_dev函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: setup_sedlbauer_isapnp
static int __devinit
setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
{
struct IsdnCardState *cs = card->cs;
struct pnp_dev *pnp_d;
if (!isapnp_present())
return -1;
while(ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
(char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__func__, err);
return(0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
card->para[0], card->para[1]);
pnp_disable_dev(pnp_d);
return(0);
}
cs->hw.sedl.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (ipid->function == ISAPNP_FUNCTION(0x2)) {
cs->subtyp = SEDL_SPEED_FAX;
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
*bytecnt = 16;
} else {
cs->subtyp = SEDL_SPEED_CARD_WIN;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
}
return (1);
} else {
printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
return(0);
}
}
ipid++;
pnp_c = NULL;
}
printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
return -1;
}
示例2: pnp_device_detach
void pnp_device_detach(struct pnp_dev *pnp_dev)
{
spin_lock(&pnp_lock);
if (pnp_dev->status == PNP_ATTACHED)
pnp_dev->status = PNP_READY;
spin_unlock(&pnp_lock);
pnp_disable_dev(pnp_dev);
}
示例3: fcpnp_remove
static void __devexit fcpnp_remove(struct pnp_dev *pdev)
{
struct fritz_adapter *adapter = pnp_get_drvdata(pdev);
if (adapter) {
fcpcipnp_release(adapter);
delete_adapter(adapter);
}
pnp_disable_dev(pdev);
}
示例4: pnp_device_probe
static int pnp_device_probe(struct device *dev)
{
int error;
struct pnp_driver *pnp_drv;
struct pnp_dev *pnp_dev;
const struct pnp_device_id *dev_id = NULL;
pnp_dev = to_pnp_dev(dev);
pnp_drv = to_pnp_driver(dev->driver);
pnp_dbg("match found with the PnP device '%s' and the driver '%s'",
dev->bus_id, pnp_drv->name);
error = pnp_device_attach(pnp_dev);
if (error < 0)
return error;
if (pnp_dev->active == 0) {
if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE)) {
error = pnp_activate_dev(pnp_dev);
if (error < 0)
return error;
}
} else if ((pnp_drv->flags & PNP_DRIVER_RES_DISABLE)
== PNP_DRIVER_RES_DISABLE) {
error = pnp_disable_dev(pnp_dev);
if (error < 0)
return error;
}
error = 0;
if (pnp_drv->probe) {
dev_id = match_device(pnp_drv, pnp_dev);
if (dev_id != NULL)
error = pnp_drv->probe(pnp_dev, dev_id);
}
if (error >= 0) {
pnp_dev->driver = pnp_drv;
error = 0;
} else
goto fail;
return error;
fail:
pnp_device_detach(pnp_dev);
return error;
}
示例5: fcpnp_probe
static int __devinit fcpnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
{
struct fritz_adapter *adapter;
int retval;
if (!pdev)
return(-ENODEV);
retval = -ENOMEM;
adapter = new_adapter();
if (!adapter)
goto err;
pnp_set_drvdata(pdev, adapter);
adapter->type = AVM_FRITZ_PNP;
pnp_disable_dev(pdev);
retval = pnp_activate_dev(pdev);
if (retval < 0) {
printk(KERN_WARNING "%s: pnp_activate_dev(%s) ret(%d)\n", __func__,
(char *)dev_id->driver_data, retval);
goto err_free;
}
adapter->io = pnp_port_start(pdev, 0);
adapter->irq = pnp_irq(pdev, 0);
printk(KERN_INFO "hisax_fcpcipnp: found adapter %s at IO %#x irq %d\n",
(char *) dev_id->driver_data, adapter->io, adapter->irq);
retval = fcpcipnp_setup(adapter);
if (retval)
goto err_free;
return 0;
err_free:
delete_adapter(adapter);
err:
return retval;
}
示例6: setup_teles3
int __devinit
setup_teles3(struct IsdnCard *card)
{
u_char val;
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, teles3_revision);
printk(KERN_INFO "HiSax: Teles IO driver Rev. %s\n", HiSax_getrev(tmp));
if ((cs->typ != ISDN_CTYPE_16_3) && (cs->typ != ISDN_CTYPE_PNP)
&& (cs->typ != ISDN_CTYPE_TELESPCMCIA) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA))
return (0);
#ifdef __ISAPNP__
if (!card->para[1] && isapnp_present()) {
struct pnp_dev *pnp_d;
while(ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
(char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__FUNCTION__, err);
return(0);
}
card->para[3] = pnp_port_start(pnp_d, 2);
card->para[2] = pnp_port_start(pnp_d, 1);
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1] || !card->para[2]) {
printk(KERN_ERR "Teles PnP:some resources are missing %ld/%lx/%lx\n",
card->para[0], card->para[1], card->para[2]);
pnp_disable_dev(pnp_d);
return(0);
}
break;
} else {
printk(KERN_ERR "Teles PnP: PnP error card found, no device\n");
}
}
ipid++;
pnp_c = NULL;
}
if (!ipid->card_vendor) {
printk(KERN_INFO "Teles PnP: no ISAPnP card found\n");
return(0);
}
}
#endif
if (cs->typ == ISDN_CTYPE_16_3) {
cs->hw.teles3.cfg_reg = card->para[1];
switch (cs->hw.teles3.cfg_reg) {
case 0x180:
case 0x280:
case 0x380:
cs->hw.teles3.cfg_reg |= 0xc00;
break;
}
cs->hw.teles3.isac = cs->hw.teles3.cfg_reg - 0x420;
cs->hw.teles3.hscx[0] = cs->hw.teles3.cfg_reg - 0xc20;
cs->hw.teles3.hscx[1] = cs->hw.teles3.cfg_reg - 0x820;
} else if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
cs->hw.teles3.cfg_reg = 0;
cs->hw.teles3.hscx[0] = card->para[1] - 0x20;
cs->hw.teles3.hscx[1] = card->para[1];
cs->hw.teles3.isac = card->para[1] + 0x20;
} else if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
cs->hw.teles3.cfg_reg = card->para[3];
cs->hw.teles3.isac = card->para[2] - 32;
cs->hw.teles3.hscx[0] = card->para[1] - 32;
cs->hw.teles3.hscx[1] = card->para[1];
} else { /* PNP */
cs->hw.teles3.cfg_reg = 0;
cs->hw.teles3.isac = card->para[1] - 32;
cs->hw.teles3.hscx[0] = card->para[2] - 32;
cs->hw.teles3.hscx[1] = card->para[2];
}
cs->irq = card->para[0];
cs->hw.teles3.isacfifo = cs->hw.teles3.isac + 0x3e;
cs->hw.teles3.hscxfifo[0] = cs->hw.teles3.hscx[0] + 0x3e;
cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
if (!request_region(cs->hw.teles3.hscx[1], 96, "HiSax Teles PCMCIA")) {
printk(KERN_WARNING
"HiSax: %s ports %x-%x already in use\n",
CardType[cs->typ],
cs->hw.teles3.hscx[1],
cs->hw.teles3.hscx[1] + 96);
return (0);
}
} else {
if (cs->hw.teles3.cfg_reg) {
//.........这里部分代码省略.........
示例7: setup_ix1micro
int __devinit
setup_ix1micro(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, ix1_revision);
printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_IX1MICROR2)
return (0);
#ifdef __ISAPNP__
if (!card->para[1] && isapnp_present()) {
struct pnp_dev *pnp_d;
while(ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
(char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__FUNCTION__, err);
return(0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
printk(KERN_ERR "ITK PnP:some resources are missing %ld/%lx\n",
card->para[0], card->para[1]);
pnp_disable_dev(pnp_d);
return(0);
}
break;
} else {
printk(KERN_ERR "ITK PnP: PnP error card found, no device\n");
}
}
ipid++;
pnp_c = NULL;
}
if (!ipid->card_vendor) {
printk(KERN_INFO "ITK PnP: no ISAPnP card found\n");
return(0);
}
}
#endif
/* IO-Ports */
cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
cs->hw.ix1.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (cs->hw.ix1.cfg_reg) {
if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
cs->hw.ix1.cfg_reg,
cs->hw.ix1.cfg_reg + 4);
return (0);
}
}
printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &ix1_card_msg;
cs->irq_func = &ix1micro_interrupt;
ISACVersion(cs, "ix1-Micro:");
if (HscxVersion(cs, "ix1-Micro:")) {
printk(KERN_WARNING
"ix1-Micro: wrong HSCX versions check IO address\n");
release_io_ix1micro(cs);
return (0);
}
return (1);
}
示例8: setup_diva_isapnp
static int setup_diva_isapnp(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
struct pnp_dev *pnp_d;
if (!isapnp_present())
return (-1); /* card not found; continue search */
while (ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
(char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err < 0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__func__, err);
return (0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
printk(KERN_ERR "Diva PnP:some resources are missing %ld/%lx\n",
card->para[0], card->para[1]);
pnp_disable_dev(pnp_d);
return (0);
}
cs->hw.diva.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (ipid->function == ISAPNP_FUNCTION(0xA1)) {
cs->subtyp = DIVA_IPAC_ISA;
cs->hw.diva.ctrl = 0;
cs->hw.diva.isac =
card->para[1] + DIVA_IPAC_DATA;
cs->hw.diva.hscx =
card->para[1] + DIVA_IPAC_DATA;
cs->hw.diva.isac_adr =
card->para[1] + DIVA_IPAC_ADR;
cs->hw.diva.hscx_adr =
card->para[1] + DIVA_IPAC_ADR;
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
} else {
cs->subtyp = DIVA_ISA;
cs->hw.diva.ctrl =
card->para[1] + DIVA_ISA_CTRL;
cs->hw.diva.isac =
card->para[1] + DIVA_ISA_ISAC_DATA;
cs->hw.diva.hscx =
card->para[1] + DIVA_HSCX_DATA;
cs->hw.diva.isac_adr =
card->para[1] + DIVA_ISA_ISAC_ADR;
cs->hw.diva.hscx_adr =
card->para[1] + DIVA_HSCX_ADR;
}
return (1); /* card found */
} else {
printk(KERN_ERR "Diva PnP: PnP error card found, no device\n");
return (0);
}
}
ipid++;
pnp_c = NULL;
}
return (-1); /* card not found; continue search */
}
示例9: setup_isurf
int __devinit
setup_isurf(struct IsdnCard *card)
{
int ver;
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, ISurf_revision);
printk(KERN_INFO "HiSax: ISurf driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_ISURF)
return(0);
if (card->para[1] && card->para[2]) {
cs->hw.isurf.reset = card->para[1];
cs->hw.isurf.phymem = card->para[2];
cs->irq = card->para[0];
} else {
#ifdef __ISAPNP__
if (isapnp_present()) {
struct pnp_dev *pnp_d = NULL;
int err;
cs->subtyp = 0;
if ((pnp_c = pnp_find_card(
ISAPNP_VENDOR('S', 'I', 'E'),
ISAPNP_FUNCTION(0x0010), pnp_c))) {
if (!(pnp_d = pnp_find_dev(pnp_c,
ISAPNP_VENDOR('S', 'I', 'E'),
ISAPNP_FUNCTION(0x0010), pnp_d))) {
printk(KERN_ERR "ISurfPnP: PnP error card found, no device\n");
return (0);
}
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
cs->hw.isurf.reset = pnp_port_start(pnp_d, 0);
cs->hw.isurf.phymem = pnp_mem_start(pnp_d, 1);
cs->irq = pnp_irq(pnp_d, 0);
if (!cs->irq || !cs->hw.isurf.reset || !cs->hw.isurf.phymem) {
printk(KERN_ERR "ISurfPnP:some resources are missing %d/%x/%lx\n",
cs->irq, cs->hw.isurf.reset, cs->hw.isurf.phymem);
pnp_disable_dev(pnp_d);
return(0);
}
} else {
printk(KERN_INFO "ISurfPnP: no ISAPnP card found\n");
return(0);
}
} else {
printk(KERN_INFO "ISurfPnP: no ISAPnP bus found\n");
return(0);
}
#else
printk(KERN_WARNING "HiSax: Siemens I-Surf port/mem not set\n");
return (0);
#endif
}
if (!request_region(cs->hw.isurf.reset, 1, "isurf isdn")) {
printk(KERN_WARNING
"HiSax: Siemens I-Surf config port %x already in use\n",
cs->hw.isurf.reset);
return (0);
}
if (!request_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE, "isurf iomem")) {
printk(KERN_WARNING "HiSax: Siemens I-Surf memory region "
"%lx-%lx already in use\n",
cs->hw.isurf.phymem,
cs->hw.isurf.phymem + ISURF_IOMEM_SIZE);
release_region(cs->hw.isurf.reset, 1);
return (0);
}
cs->hw.isurf.isar = ioremap(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE);
cs->hw.isurf.isac = cs->hw.isurf.isar + ISURF_ISAC_OFFSET;
printk(KERN_INFO
"ISurf: defined at 0x%x 0x%lx IRQ %d\n",
cs->hw.isurf.reset,
cs->hw.isurf.phymem,
cs->irq);
setup_isac(cs);
cs->cardmsg = &ISurf_card_msg;
cs->irq_func = &isurf_interrupt;
cs->auxcmd = &isurf_auxcmd;
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->bcs[0].hw.isar.reg = &cs->hw.isurf.isar_r;
cs->bcs[1].hw.isar.reg = &cs->hw.isurf.isar_r;
test_and_set_bit(HW_ISAR, &cs->HW_Flags);
ISACVersion(cs, "ISurf:");
cs->BC_Read_Reg = &ReadISAR;
cs->BC_Write_Reg = &WriteISAR;
cs->BC_Send_Data = &isar_fill_fifo;
ver = ISARVersion(cs, "ISurf:");
if (ver < 0) {
printk(KERN_WARNING
"ISurf: wrong ISAR version (ret = %d)\n", ver);
release_io_isurf(cs);
return (0);
}
//.........这里部分代码省略.........
示例10: sb1000_probe_one
static int
sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id)
{
struct net_device *dev;
unsigned short ioaddr[2], irq;
unsigned int serial_number;
int error = -ENODEV;
if (pnp_device_attach(pdev) < 0)
return -ENODEV;
if (pnp_activate_dev(pdev) < 0)
goto out_detach;
if (!pnp_port_valid(pdev, 0) || !pnp_port_valid(pdev, 1))
goto out_disable;
if (!pnp_irq_valid(pdev, 0))
goto out_disable;
serial_number = pdev->card->serial;
ioaddr[0] = pnp_port_start(pdev, 0);
ioaddr[1] = pnp_port_start(pdev, 0);
irq = pnp_irq(pdev, 0);
if (!request_region(ioaddr[0], 16, "sb1000"))
goto out_disable;
if (!request_region(ioaddr[1], 16, "sb1000"))
goto out_release_region0;
dev = alloc_etherdev(sizeof(struct sb1000_private));
if (!dev) {
error = -ENOMEM;
goto out_release_regions;
}
dev->base_addr = ioaddr[0];
/* mem_start holds the second I/O address */
dev->mem_start = ioaddr[1];
dev->irq = irq;
if (sb1000_debug > 0)
printk(KERN_NOTICE "%s: sb1000 at (%#3.3lx,%#3.3lx), "
"S/N %#8.8x, IRQ %d.\n", dev->name, dev->base_addr,
dev->mem_start, serial_number, dev->irq);
/*
* The SB1000 is an rx-only cable modem device. The uplink is a modem
* and we do not want to arp on it.
*/
dev->flags = IFF_POINTOPOINT|IFF_NOARP;
SET_NETDEV_DEV(dev, &pdev->dev);
if (sb1000_debug > 0)
printk(KERN_NOTICE "%s", version);
dev->netdev_ops = &sb1000_netdev_ops;
/* hardware address is 0:0:serial_number */
dev->dev_addr[2] = serial_number >> 24 & 0xff;
dev->dev_addr[3] = serial_number >> 16 & 0xff;
dev->dev_addr[4] = serial_number >> 8 & 0xff;
dev->dev_addr[5] = serial_number >> 0 & 0xff;
pnp_set_drvdata(pdev, dev);
error = register_netdev(dev);
if (error)
goto out_free_netdev;
return 0;
out_free_netdev:
free_netdev(dev);
out_release_regions:
release_region(ioaddr[1], 16);
out_release_region0:
release_region(ioaddr[0], 16);
out_disable:
pnp_disable_dev(pdev);
out_detach:
pnp_device_detach(pdev);
return error;
}
示例11: setup_ix1micro
int __devinit
setup_ix1micro(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, ix1_revision);
;
if (cs->typ != ISDN_CTYPE_IX1MICROR2)
return (0);
#ifdef __ISAPNP__
if (!card->para[1] && isapnp_present()) {
struct pnp_dev *pnp_d;
while(ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
// printk(KERN_INFO "HiSax: %s detected\n",
;
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
// printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
;
return(0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
// printk(KERN_ERR "ITK PnP:some resources are missing %ld/%lx\n",
;
pnp_disable_dev(pnp_d);
return(0);
}
break;
} else {
;
}
}
ipid++;
pnp_c = NULL;
}
if (!ipid->card_vendor) {
;
return(0);
}
}
#endif
/* IO-Ports */
cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
cs->hw.ix1.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (cs->hw.ix1.cfg_reg) {
if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
// printk(KERN_WARNING
// "HiSax: ITK ix1-micro Rev.2 config port "
// "%x-%x already in use\n",
// cs->hw.ix1.cfg_reg,
;
return (0);
}
}
// printk(KERN_INFO "HiSax: ITK ix1-micro Rev.2 config irq:%d io:0x%X\n",
;
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &ix1_card_msg;
cs->irq_func = &ix1micro_interrupt;
ISACVersion(cs, "ix1-Micro:");
if (HscxVersion(cs, "ix1-Micro:")) {
// printk(KERN_WARNING
;
release_io_ix1micro(cs);
return (0);
}
return (1);
}
示例12: setup_niccy
int __init
setup_niccy(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, niccy_revision);
printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_NICCY)
return (0);
#ifdef __ISAPNP__
if (!card->para[1] && isapnp_present()) {
struct pnp_dev *pnp_d = NULL;
int err;
if ((pnp_c = pnp_find_card(
ISAPNP_VENDOR('S', 'D', 'A'),
ISAPNP_FUNCTION(0x0150), pnp_c))) {
if (!(pnp_d = pnp_find_dev(pnp_c,
ISAPNP_VENDOR('S', 'D', 'A'),
ISAPNP_FUNCTION(0x0150), pnp_d))) {
printk(KERN_ERR "NiccyPnP: PnP error card found, no device\n");
return (0);
}
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__FUNCTION__, err);
return(0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[2] = pnp_port_start(pnp_d, 1);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1] || !card->para[2]) {
printk(KERN_ERR "NiccyPnP:some resources are missing %ld/%lx/%lx\n",
card->para[0], card->para[1], card->para[2]);
pnp_disable_dev(pnp_d);
return(0);
}
} else {
printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n");
}
}
#endif
if (card->para[1]) {
cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
cs->hw.niccy.cfg_reg = 0;
cs->subtyp = NICCY_PNP;
cs->irq = card->para[0];
if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
printk(KERN_WARNING
"HiSax: %s data port %x-%x already in use\n",
CardType[card->typ],
cs->hw.niccy.isac,
cs->hw.niccy.isac + 1);
return (0);
}
if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
printk(KERN_WARNING
"HiSax: %s address port %x-%x already in use\n",
CardType[card->typ],
cs->hw.niccy.isac_ale,
cs->hw.niccy.isac_ale + 1);
release_region(cs->hw.niccy.isac, 2);
return (0);
}
} else {
#ifdef CONFIG_PCI
u_int pci_ioaddr;
cs->subtyp = 0;
if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM,
PCI_DEVICE_ID_SATSAGEM_NICCY, niccy_dev))) {
if (pci_enable_device(niccy_dev))
return(0);
/* get IRQ */
if (!niccy_dev->irq) {
printk(KERN_WARNING "Niccy: No IRQ for PCI card found\n");
return(0);
}
cs->irq = niccy_dev->irq;
cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
if (!cs->hw.niccy.cfg_reg) {
printk(KERN_WARNING "Niccy: No IO-Adr for PCI cfg found\n");
return(0);
}
pci_ioaddr = pci_resource_start(niccy_dev, 1);
if (!pci_ioaddr) {
printk(KERN_WARNING "Niccy: No IO-Adr for PCI card found\n");
return(0);
}
cs->subtyp = NICCY_PCI;
} else {
printk(KERN_WARNING "Niccy: No PCI card found\n");
return(0);
}
cs->irq_flags |= SA_SHIRQ;
//.........这里部分代码省略.........
示例13: setup_sedlbauer
int __devinit
setup_sedlbauer(struct IsdnCard *card)
{
int bytecnt, ver, val;
struct IsdnCardState *cs = card->cs;
char tmp[64];
u16 sub_vendor_id, sub_id;
strcpy(tmp, Sedlbauer_revision);
printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
cs->subtyp = SEDL_SPEED_CARD_WIN;
cs->hw.sedl.bus = SEDL_BUS_ISA;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {
cs->subtyp = SEDL_SPEED_STAR;
cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {
cs->subtyp = SEDL_SPEED_FAX;
cs->hw.sedl.bus = SEDL_BUS_ISA;
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
} else
return (0);
bytecnt = 8;
if (card->para[1]) {
cs->hw.sedl.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
bytecnt = 16;
}
} else {
#ifdef __ISAPNP__
if (isapnp_present()) {
struct pnp_dev *pnp_d;
while(ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
(char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__FUNCTION__, err);
return(0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
card->para[0], card->para[1]);
pnp_disable_dev(pnp_d);
return(0);
}
cs->hw.sedl.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (ipid->function == ISAPNP_FUNCTION(0x2)) {
cs->subtyp = SEDL_SPEED_FAX;
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
bytecnt = 16;
} else {
cs->subtyp = SEDL_SPEED_CARD_WIN;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
}
goto ready;
} else {
printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
return(0);
}
}
ipid++;
pnp_c = NULL;
}
if (!ipid->card_vendor) {
printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
}
}
#endif
/* Probe for Sedlbauer speed pci */
#ifdef CONFIG_PCI
if ((dev_sedl = pci_find_device(PCI_VENDOR_ID_TIGERJET,
PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
if (pci_enable_device(dev_sedl))
return(0);
cs->irq = dev_sedl->irq;
if (!cs->irq) {
printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
return(0);
}
cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
} else {
//.........这里部分代码省略.........
示例14: setup_hfcs
int __devinit
setup_hfcs(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, hfcs_revision);
printk(KERN_INFO "HiSax: HFC-S driver Rev. %s\n", HiSax_getrev(tmp));
#ifdef __ISAPNP__
if (!card->para[1] && isapnp_present()) {
struct pnp_dev *pnp_d;
while(ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
(char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__func__, err);
return(0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
printk(KERN_ERR "HFC PnP:some resources are missing %ld/%lx\n",
card->para[0], card->para[1]);
pnp_disable_dev(pnp_d);
return(0);
}
break;
} else {
printk(KERN_ERR "HFC PnP: PnP error card found, no device\n");
}
}
ipid++;
pnp_c = NULL;
}
if (!ipid->card_vendor) {
printk(KERN_INFO "HFC PnP: no ISAPnP card found\n");
return(0);
}
}
#endif
cs->hw.hfcD.addr = card->para[1] & 0xfffe;
cs->irq = card->para[0];
cs->hw.hfcD.cip = 0;
cs->hw.hfcD.int_s1 = 0;
cs->hw.hfcD.send = NULL;
cs->bcs[0].hw.hfc.send = NULL;
cs->bcs[1].hw.hfc.send = NULL;
cs->hw.hfcD.dfifosize = 512;
cs->dc.hfcd.ph_state = 0;
cs->hw.hfcD.fifo = 255;
if (cs->typ == ISDN_CTYPE_TELES3C) {
cs->hw.hfcD.bfifosize = 1024 + 512;
} else if (cs->typ == ISDN_CTYPE_ACERP10) {
cs->hw.hfcD.bfifosize = 7*1024 + 512;
} else
return (0);
if (!request_region(cs->hw.hfcD.addr, 2, "HFCS isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
cs->hw.hfcD.addr,
cs->hw.hfcD.addr + 2);
return (0);
}
printk(KERN_INFO
"HFCS: defined at 0x%x IRQ %d HZ %d\n",
cs->hw.hfcD.addr,
cs->irq, HZ);
if (cs->typ == ISDN_CTYPE_TELES3C) {
/* Teles 16.3c IO ADR is 0x200 | YY0U (YY Bit 15/14 address) */
outb(0x00, cs->hw.hfcD.addr);
outb(0x56, cs->hw.hfcD.addr | 1);
} else if (cs->typ == ISDN_CTYPE_ACERP10) {
/* Acer P10 IO ADR is 0x300 */
outb(0x00, cs->hw.hfcD.addr);
outb(0x57, cs->hw.hfcD.addr | 1);
}
set_cs_func(cs);
cs->hw.hfcD.timer.function = (void *) hfcs_Timer;
cs->hw.hfcD.timer.data = (long) cs;
init_timer(&cs->hw.hfcD.timer);
cs->cardmsg = &hfcs_card_msg;
cs->irq_func = &hfcs_interrupt;
return (1);
}
示例15: pnp_set_current_resources
static ssize_t
pnp_set_current_resources(struct device * dmdev, struct device_attribute *attr, const char * ubuf, size_t count)
{
struct pnp_dev *dev = to_pnp_dev(dmdev);
char *buf = (void *)ubuf;
int retval = 0;
if (dev->status & PNP_ATTACHED) {
retval = -EBUSY;
pnp_info("Device %s cannot be configured because it is in use.", dev->dev.bus_id);
goto done;
}
while (isspace(*buf))
++buf;
if (!strnicmp(buf,"disable",7)) {
retval = pnp_disable_dev(dev);
goto done;
}
if (!strnicmp(buf,"activate",8)) {
retval = pnp_activate_dev(dev);
goto done;
}
if (!strnicmp(buf,"fill",4)) {
if (dev->active)
goto done;
retval = pnp_auto_config_dev(dev);
goto done;
}
if (!strnicmp(buf,"auto",4)) {
if (dev->active)
goto done;
pnp_init_resource_table(&dev->res);
retval = pnp_auto_config_dev(dev);
goto done;
}
if (!strnicmp(buf,"clear",5)) {
if (dev->active)
goto done;
pnp_init_resource_table(&dev->res);
goto done;
}
if (!strnicmp(buf,"get",3)) {
down(&pnp_res_mutex);
if (pnp_can_read(dev))
dev->protocol->get(dev, &dev->res);
up(&pnp_res_mutex);
goto done;
}
if (!strnicmp(buf,"set",3)) {
int nport = 0, nmem = 0, nirq = 0, ndma = 0;
if (dev->active)
goto done;
buf += 3;
pnp_init_resource_table(&dev->res);
down(&pnp_res_mutex);
while (1) {
while (isspace(*buf))
++buf;
if (!strnicmp(buf,"io",2)) {
buf += 2;
while (isspace(*buf))
++buf;
dev->res.port_resource[nport].start = simple_strtoul(buf,&buf,0);
while (isspace(*buf))
++buf;
if(*buf == '-') {
buf += 1;
while (isspace(*buf))
++buf;
dev->res.port_resource[nport].end = simple_strtoul(buf,&buf,0);
} else
dev->res.port_resource[nport].end = dev->res.port_resource[nport].start;
dev->res.port_resource[nport].flags = IORESOURCE_IO;
nport++;
if (nport >= PNP_MAX_PORT)
break;
continue;
}
if (!strnicmp(buf,"mem",3)) {
buf += 3;
while (isspace(*buf))
++buf;
dev->res.mem_resource[nmem].start = simple_strtoul(buf,&buf,0);
while (isspace(*buf))
++buf;
if(*buf == '-') {
buf += 1;
while (isspace(*buf))
++buf;
dev->res.mem_resource[nmem].end = simple_strtoul(buf,&buf,0);
} else
dev->res.mem_resource[nmem].end = dev->res.mem_resource[nmem].start;
dev->res.mem_resource[nmem].flags = IORESOURCE_MEM;
nmem++;
if (nmem >= PNP_MAX_MEM)
break;
continue;
}
if (!strnicmp(buf,"irq",3)) {
//.........这里部分代码省略.........