C++ pm_runtime_enable函数代码示例

static int __devinit msm_pdm_led_probe(struct platform_device *pdev)
{
	const struct led_info *pdata = pdev->dev.platform_data;
	struct pdm_led_data *led;
	struct resource *res, *ioregion;
	u32 tcxo_pdm_ctl;
	int rc;

	if (!pdata) {
		pr_err("platform data is invalid\n");
		return -EINVAL;
	}

	if (pdev->id > 2) {
		pr_err("pdm id is invalid\n");
		return -EINVAL;
	}

	led = kzalloc(sizeof(struct pdm_led_data), GFP_KERNEL);
	if (!led)
		return -ENOMEM;

	
	rc = pm_runtime_set_active(&pdev->dev);
	if (rc < 0)
		dev_dbg(&pdev->dev, "unable to set runtime pm state\n");
	pm_runtime_enable(&pdev->dev);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		pr_err("get resource failed\n");
		rc = -EINVAL;
		goto err_get_res;
	}

	ioregion = request_mem_region(res->start, resource_size(res),
						pdev->name);
	if (!ioregion) {
		pr_err("request for mem region failed\n");
		rc = -ENOMEM;
		goto err_get_res;
	}

	led->perph_base = ioremap(res->start, resource_size(res));
	if (!led->perph_base) {
		pr_err("ioremap failed\n");
		rc = -ENOMEM;
		goto err_ioremap;
	}

	led->pdm_offset = ((pdev->id) + 1) * 4;

	
	tcxo_pdm_ctl = readl_relaxed(led->perph_base);
	tcxo_pdm_ctl |= (1 << pdev->id);
	writel_relaxed(tcxo_pdm_ctl, led->perph_base);

	
	msm_led_brightness_set_percent(led, 0);

	led->cdev.brightness_set = msm_led_brightness_set;
	led->cdev.name = pdata->name ? : "leds-msm-pdm";

	rc = led_classdev_register(&pdev->dev, &led->cdev);
	if (rc) {
		pr_err("led class registration failed\n");
		goto err_led_reg;
	}

#ifdef CONFIG_HAS_EARLYSUSPEND
	led->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN +
						LED_SUSPEND_LEVEL;
	led->early_suspend.suspend = msm_led_pdm_early_suspend;
	register_early_suspend(&led->early_suspend);
#endif

	platform_set_drvdata(pdev, led);
	return 0;

err_led_reg:
	iounmap(led->perph_base);
err_ioremap:
	release_mem_region(res->start, resource_size(res));
err_get_res:
	pm_runtime_set_suspended(&pdev->dev);
	pm_runtime_disable(&pdev->dev);
	kfree(led);
	return rc;
}

static int sh_mobile_i2c_probe(struct platform_device *dev)
{
	struct i2c_sh_mobile_platform_data *pdata = dev_get_platdata(&dev->dev);
	struct sh_mobile_i2c_data *pd;
	struct i2c_adapter *adap;
	struct resource *res;
	int ret;
	u32 bus_speed;

	pd = devm_kzalloc(&dev->dev, sizeof(struct sh_mobile_i2c_data), GFP_KERNEL);
	if (!pd)
		return -ENOMEM;

	pd->clk = devm_clk_get(&dev->dev, NULL);
	if (IS_ERR(pd->clk)) {
		dev_err(&dev->dev, "cannot get clock\n");
		return PTR_ERR(pd->clk);
	}

	ret = sh_mobile_i2c_hook_irqs(dev);
	if (ret)
		return ret;

	pd->dev = &dev->dev;
	platform_set_drvdata(dev, pd);

	res = platform_get_resource(dev, IORESOURCE_MEM, 0);

	pd->reg = devm_ioremap_resource(&dev->dev, res);
	if (IS_ERR(pd->reg))
		return PTR_ERR(pd->reg);

	/* Use platform data bus speed or STANDARD_MODE */
	ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
	pd->bus_speed = ret ? STANDARD_MODE : bus_speed;

	pd->clks_per_count = 1;

	if (dev->dev.of_node) {
		const struct of_device_id *match;

		match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev);
		if (match) {
			const struct sh_mobile_dt_config *config;

			config = match->data;
			pd->clks_per_count = config->clks_per_count;
		}
	} else {
		if (pdata && pdata->bus_speed)
			pd->bus_speed = pdata->bus_speed;
		if (pdata && pdata->clks_per_count)
			pd->clks_per_count = pdata->clks_per_count;
	}

	/* The IIC blocks on SH-Mobile ARM processors
	 * come with two new bits in ICIC.
	 */
	if (resource_size(res) > 0x17)
		pd->flags |= IIC_FLAG_HAS_ICIC67;

	ret = sh_mobile_i2c_init(pd);
	if (ret)
		return ret;

	/* Enable Runtime PM for this device.
	 *
	 * Also tell the Runtime PM core to ignore children
	 * for this device since it is valid for us to suspend
	 * this I2C master driver even though the slave devices
	 * on the I2C bus may not be suspended.
	 *
	 * The state of the I2C hardware bus is unaffected by
	 * the Runtime PM state.
	 */
	pm_suspend_ignore_children(&dev->dev, true);
	pm_runtime_enable(&dev->dev);

	/* setup the private data */
	adap = &pd->adap;
	i2c_set_adapdata(adap, pd);

	adap->owner = THIS_MODULE;
	adap->algo = &sh_mobile_i2c_algorithm;
	adap->dev.parent = &dev->dev;
	adap->retries = 5;
	adap->nr = dev->id;
	adap->dev.of_node = dev->dev.of_node;

	strlcpy(adap->name, dev->name, sizeof(adap->name));

	spin_lock_init(&pd->lock);
	init_waitqueue_head(&pd->wait);

	ret = i2c_add_numbered_adapter(adap);
	if (ret < 0) {
		dev_err(&dev->dev, "cannot add numbered adapter\n");
		return ret;
	}

//.........这里部分代码省略.........

static int sprd_i2c_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct sprd_i2c *i2c_dev;
	struct resource *res;
	u32 prop;
	int ret;

	pdev->id = of_alias_get_id(dev->of_node, "i2c");

	i2c_dev = devm_kzalloc(dev, sizeof(struct sprd_i2c), GFP_KERNEL);
	if (!i2c_dev)
		return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	i2c_dev->base = devm_ioremap_resource(dev, res);
	if (IS_ERR(i2c_dev->base))
		return PTR_ERR(i2c_dev->base);

	i2c_dev->irq = platform_get_irq(pdev, 0);
	if (i2c_dev->irq < 0) {
		dev_err(&pdev->dev, "failed to get irq resource\n");
		return i2c_dev->irq;
	}

	i2c_set_adapdata(&i2c_dev->adap, i2c_dev);
	init_completion(&i2c_dev->complete);
	snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
		 "%s", "sprd-i2c");

	i2c_dev->bus_freq = 100000;
	i2c_dev->adap.owner = THIS_MODULE;
	i2c_dev->dev = dev;
	i2c_dev->adap.retries = 3;
	i2c_dev->adap.algo = &sprd_i2c_algo;
	i2c_dev->adap.algo_data = i2c_dev;
	i2c_dev->adap.dev.parent = dev;
	i2c_dev->adap.nr = pdev->id;
	i2c_dev->adap.dev.of_node = dev->of_node;

	if (!of_property_read_u32(dev->of_node, "clock-frequency", &prop))
		i2c_dev->bus_freq = prop;

	/* We only support 100k and 400k now, otherwise will return error. */
	if (i2c_dev->bus_freq != 100000 && i2c_dev->bus_freq != 400000)
		return -EINVAL;

	sprd_i2c_clk_init(i2c_dev);
	platform_set_drvdata(pdev, i2c_dev);

	ret = clk_prepare_enable(i2c_dev->clk);
	if (ret)
		return ret;

	sprd_i2c_enable(i2c_dev);

	pm_runtime_set_autosuspend_delay(i2c_dev->dev, SPRD_I2C_PM_TIMEOUT);
	pm_runtime_use_autosuspend(i2c_dev->dev);
	pm_runtime_set_active(i2c_dev->dev);
	pm_runtime_enable(i2c_dev->dev);

	ret = pm_runtime_get_sync(i2c_dev->dev);
	if (ret < 0)
		goto err_rpm_put;

	ret = devm_request_threaded_irq(dev, i2c_dev->irq,
		sprd_i2c_isr, sprd_i2c_isr_thread,
		IRQF_NO_SUSPEND | IRQF_ONESHOT,
		pdev->name, i2c_dev);
	if (ret) {
		dev_err(&pdev->dev, "failed to request irq %d\n", i2c_dev->irq);
		goto err_rpm_put;
	}

	ret = i2c_add_numbered_adapter(&i2c_dev->adap);
	if (ret) {
		dev_err(&pdev->dev, "add adapter failed\n");
		goto err_rpm_put;
	}

	pm_runtime_mark_last_busy(i2c_dev->dev);
	pm_runtime_put_autosuspend(i2c_dev->dev);
	return 0;

err_rpm_put:
	pm_runtime_put_noidle(i2c_dev->dev);
	pm_runtime_disable(i2c_dev->dev);
	clk_disable_unprepare(i2c_dev->clk);
	return ret;
}

static int fimg2d_probe(struct platform_device *pdev)
{
	int ret = 0;
	struct resource *res;
	struct fimg2d_platdata *pdata = to_fimg2d_plat(&pdev->dev);

	dev_info(&pdev->dev, "++%s\n", __func__);

	if (!to_fimg2d_plat(&pdev->dev)) {
		fimg2d_err("failed to get platform data\n");
		return -ENOMEM;
	}

	/* global structure */
	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
	if (!ctrl) {
		fimg2d_err("failed to allocate memory for controller\n");
		return -ENOMEM;
	}

	/* setup global ctrl */
	ret = fimg2d_setup_controller(ctrl);
	if (ret) {
		fimg2d_err("failed to setup controller\n");
		goto drv_free;
	}
	ctrl->dev = &pdev->dev;

	/* memory region */
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		fimg2d_err("failed to get resource\n");
		ret = -ENOENT;
		goto drv_free;
	}

	ctrl->mem = request_mem_region(res->start, resource_size(res),
					pdev->name);
	if (!ctrl->mem) {
		fimg2d_err("failed to request memory region\n");
		ret = -ENOMEM;
		goto drv_free;
	}

	/* ioremap */
	ctrl->regs = ioremap(res->start, resource_size(res));
	if (!ctrl->regs) {
		fimg2d_err("failed to ioremap for SFR\n");
		ret = -ENOENT;
		goto mem_free;
	}
	fimg2d_debug("base address: 0x%lx\n", (unsigned long)res->start);

	/* irq */
	ctrl->irq = platform_get_irq(pdev, 0);
	if (!ctrl->irq) {
		fimg2d_err("failed to get irq resource\n");
		ret = -ENOENT;
		goto reg_unmap;
	}
	fimg2d_debug("irq: %d\n", ctrl->irq);

	ret = request_irq(ctrl->irq, fimg2d_irq, IRQF_DISABLED,
			pdev->name, ctrl);
	if (ret) {
		fimg2d_err("failed to request irq\n");
		ret = -ENOENT;
		goto reg_unmap;
	}

	ret = fimg2d_clk_setup(ctrl);
	if (ret) {
		fimg2d_err("failed to setup clk\n");
		ret = -ENOENT;
		goto irq_free;
	}

#ifdef CONFIG_PM_RUNTIME
	pm_runtime_enable(ctrl->dev);
	fimg2d_info("enable runtime pm\n");
#endif

	g2d_cci_snoop_init(pdata->ip_ver);

	exynos_sysmmu_set_fault_handler(ctrl->dev, fimg2d_sysmmu_fault_handler);
	fimg2d_debug("register sysmmu page fault handler\n");

	/* misc register */
	ret = misc_register(&fimg2d_dev);
	if (ret) {
		fimg2d_err("failed to register misc driver\n");
		goto clk_release;
	}

	fimg2d_pm_qos_add(ctrl);

	dev_info(&pdev->dev, "fimg2d registered successfully\n");

	return 0;

//.........这里部分代码省略.........

//.........这里部分代码省略.........
	if (!mfd)
		return -ENODEV;

	if (mfd->key != MFD_KEY)
		return -EINVAL;

	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
		return -ENOMEM;

	if (tvenc_base == NULL)
		return -ENOMEM;

	mdp_dev = platform_device_alloc("mdp", pdev->id);
	if (!mdp_dev)
		return -ENOMEM;

	/*
	 * link to the latest pdev
	 */
	mfd->pdev = mdp_dev;
	mfd->dest = DISPLAY_TV;

	/*
	 * alloc panel device data
	 */
	if (platform_device_add_data
	    (mdp_dev, pdev->dev.platform_data,
	     sizeof(struct msm_fb_panel_data))) {
		pr_err("tvenc_probe: platform_device_add_data failed!\n");
		platform_device_put(mdp_dev);
		return -ENOMEM;
	}
	/*
	 * data chain
	 */
	pdata = mdp_dev->dev.platform_data;
	pdata->on = tvenc_on;
	pdata->off = tvenc_off;
	pdata->next = pdev;

	/*
	 * get/set panel specific fb info
	 */
	mfd->panel_info = pdata->panel_info;
#ifdef CONFIG_FB_MSM_MDP40
	mfd->fb_imgType = MDP_RGB_565;  /* base layer */
#else
	mfd->fb_imgType = MDP_YCRYCB_H2V1;
#endif

#ifdef CONFIG_MSM_BUS_SCALING
	if (!tvenc_bus_scale_handle && tvenc_pdata &&
		tvenc_pdata->bus_scale_table) {
		tvenc_bus_scale_handle =
			msm_bus_scale_register_client(
				tvenc_pdata->bus_scale_table);
		if (!tvenc_bus_scale_handle) {
			printk(KERN_ERR "%s not able to get bus scale\n",
				__func__);
		}
	}
#else
	mfd->ebi1_clk = clk_get(NULL, "ebi1_tv_clk");
	if (IS_ERR(mfd->ebi1_clk)) {
		rc = PTR_ERR(mfd->ebi1_clk);
		goto tvenc_probe_err;
	}
	clk_set_rate(mfd->ebi1_clk, MSM_SYSTEM_BUS_RATE);
#endif

	/*
	 * set driver data
	 */
	platform_set_drvdata(mdp_dev, mfd);

	/*
	 * register in mdp driver
	 */
	rc = platform_device_add(mdp_dev);
	if (rc)
		goto tvenc_probe_err;

	pm_runtime_set_active(&pdev->dev);
	pm_runtime_enable(&pdev->dev);



	pdev_list[pdev_list_cnt++] = pdev;

	return 0;

tvenc_probe_err:
#ifdef CONFIG_MSM_BUS_SCALING
	if (tvenc_pdata && tvenc_pdata->bus_scale_table &&
		tvenc_bus_scale_handle > 0)
		msm_bus_scale_unregister_client(tvenc_bus_scale_handle);
#endif
	platform_device_put(mdp_dev);
	return rc;
}

static int __init omap_rtc_probe(struct platform_device *pdev)
{
	struct resource		*res;
	struct rtc_device	*rtc;
	u8			reg, new_ctrl;
	const struct platform_device_id *id_entry;
	const struct of_device_id *of_id;

	of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
	if (of_id)
		pdev->id_entry = of_id->data;

	omap_rtc_timer = platform_get_irq(pdev, 0);
	if (omap_rtc_timer <= 0) {
		pr_debug("%s: no update irq?\n", pdev->name);
		return -ENOENT;
	}

	omap_rtc_alarm = platform_get_irq(pdev, 1);
	if (omap_rtc_alarm <= 0) {
		pr_debug("%s: no alarm irq?\n", pdev->name);
		return -ENOENT;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	rtc_base = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(rtc_base))
		return PTR_ERR(rtc_base);

	/* Enable the clock/module so that we can access the registers */
	pm_runtime_enable(&pdev->dev);
	pm_runtime_get_sync(&pdev->dev);

	id_entry = platform_get_device_id(pdev);
	if (id_entry && (id_entry->driver_data & OMAP_RTC_HAS_KICKER)) {
		rtc_writel(KICK0_VALUE, OMAP_RTC_KICK0_REG);
		rtc_writel(KICK1_VALUE, OMAP_RTC_KICK1_REG);
	}

	rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
			&omap_rtc_ops, THIS_MODULE);
	if (IS_ERR(rtc)) {
		pr_debug("%s: can't register RTC device, err %ld\n",
			pdev->name, PTR_ERR(rtc));
		goto fail0;
	}
	platform_set_drvdata(pdev, rtc);

	/* clear pending irqs, and set 1/second periodic,
	 * which we'll use instead of update irqs
	 */
	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);

	/* clear old status */
	reg = rtc_read(OMAP_RTC_STATUS_REG);
	if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) {
		pr_info("%s: RTC power up reset detected\n",
			pdev->name);
		rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG);
	}
	if (reg & (u8) OMAP_RTC_STATUS_ALARM)
		rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);

	/* handle periodic and alarm irqs */
	if (devm_request_irq(&pdev->dev, omap_rtc_timer, rtc_irq, 0,
			dev_name(&rtc->dev), rtc)) {
		pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
			pdev->name, omap_rtc_timer);
		goto fail0;
	}
	if ((omap_rtc_timer != omap_rtc_alarm) &&
		(devm_request_irq(&pdev->dev, omap_rtc_alarm, rtc_irq, 0,
			dev_name(&rtc->dev), rtc))) {
		pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
			pdev->name, omap_rtc_alarm);
		goto fail0;
	}

	/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
	reg = rtc_read(OMAP_RTC_CTRL_REG);
	if (reg & (u8) OMAP_RTC_CTRL_STOP)
		pr_info("%s: already running\n", pdev->name);

	/* force to 24 hour mode */
	new_ctrl = reg & (OMAP_RTC_CTRL_SPLIT|OMAP_RTC_CTRL_AUTO_COMP);
	new_ctrl |= OMAP_RTC_CTRL_STOP;

	/* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
	 *
	 *  - Device wake-up capability setting should come through chip
	 *    init logic. OMAP1 boards should initialize the "wakeup capable"
	 *    flag in the platform device if the board is wired right for
	 *    being woken up by RTC alarm. For OMAP-L138, this capability
	 *    is built into the SoC by the "Deep Sleep" capability.
	 *
	 *  - Boards wired so RTC_ON_nOFF is used as the reset signal,
	 *    rather than nPWRON_RESET, should forcibly enable split
	 *    power mode.  (Some chip errata report that RTC_CTRL_SPLIT
	 *    is write-only, and always reads as zero...)
	 */
//.........这里部分代码省略.........

static void msm_hsusb_request_host(void *handle, int request)
{
	struct msmusb_hcd *mhcd = handle;
	struct usb_hcd *hcd = mhcd_to_hcd(mhcd);
	struct msm_usb_host_platform_data *pdata = mhcd->pdata;
	struct msm_otg *otg = container_of(mhcd->xceiv, struct msm_otg, otg);
#ifdef CONFIG_USB_OTG
	struct usb_device *udev = hcd->self.root_hub;
#endif
	struct device *dev = hcd->self.controller;

	switch (request) {
#ifdef CONFIG_USB_OTG
	case REQUEST_HNP_SUSPEND:
		/* disable Root hub auto suspend. As hardware is configured
		 * for peripheral mode, mark hardware is not available.
		 */
		if (PHY_TYPE(pdata->phy_info) == USB_PHY_INTEGRATED) {
			pm_runtime_disable(&udev->dev);
			/* Mark root hub as disconnected. This would
			 * protect suspend/resume via sysfs.
			 */
			udev->state = USB_STATE_NOTATTACHED;
			clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
			hcd->state = HC_STATE_HALT;
			pm_runtime_put_noidle(dev);
			pm_runtime_suspend(dev);
		}
		break;
	case REQUEST_HNP_RESUME:
		if (PHY_TYPE(pdata->phy_info) == USB_PHY_INTEGRATED) {
			pm_runtime_get_noresume(dev);
			pm_runtime_resume(dev);
			disable_irq(hcd->irq);
			ehci_msm_reset(hcd);
			ehci_msm_run(hcd);
			set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
			pm_runtime_enable(&udev->dev);
			udev->state = USB_STATE_CONFIGURED;
			enable_irq(hcd->irq);
		}
		break;
#endif
	case REQUEST_RESUME:
		usb_hcd_resume_root_hub(hcd);
		break;
	case REQUEST_START:
		if (mhcd->running)
			break;
		pm_runtime_get_noresume(dev);
		pm_runtime_resume(dev);
		wake_lock(&mhcd->wlock);
		msm_xusb_pm_qos_update(mhcd, 1);
		msm_xusb_enable_clks(mhcd);
		if (PHY_TYPE(pdata->phy_info) == USB_PHY_INTEGRATED)
			if (otg->set_clk)
				otg->set_clk(mhcd->xceiv, 1);
		if (pdata->vbus_power)
			pdata->vbus_power(pdata->phy_info, 1);
		if (pdata->config_gpio)
			pdata->config_gpio(1);
		usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
		mhcd->running = 1;
		if (PHY_TYPE(pdata->phy_info) == USB_PHY_INTEGRATED)
			if (otg->set_clk)
				otg->set_clk(mhcd->xceiv, 0);
		break;
	case REQUEST_STOP:
		if (!mhcd->running)
			break;
		mhcd->running = 0;
		/* come out of lpm before deregistration */
		if (PHY_TYPE(pdata->phy_info) == USB_PHY_SERIAL_PMIC) {
			usb_lpm_exit(hcd);
			if (cancel_work_sync(&(mhcd->lpm_exit_work)))
				usb_lpm_exit_w(&mhcd->lpm_exit_work);
		}
		usb_remove_hcd(hcd);
		if (pdata->config_gpio)
			pdata->config_gpio(0);
		if (pdata->vbus_power)
			pdata->vbus_power(pdata->phy_info, 0);
		msm_xusb_disable_clks(mhcd);
		wake_lock_timeout(&mhcd->wlock, HZ/2);
		msm_xusb_pm_qos_update(mhcd, 0);
		pm_runtime_put_noidle(dev);
		pm_runtime_suspend(dev);
		break;
	}
}

//.........这里部分代码省略.........

	init_completion(&mehci->rt_completion);
	init_completion(&mehci->gpt0_completion);
	ret = msm_hsic_reset(mehci);
	if (ret) {
		dev_err(&pdev->dev, "unable to initialize PHY\n");
		goto deinit_vddcx;
	}

	ret = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
	if (ret) {
		dev_err(&pdev->dev, "unable to register HCD\n");
		goto unconfig_gpio;
	}

	device_init_wakeup(&pdev->dev, 1);
	wake_lock_init(&mehci->wlock, WAKE_LOCK_SUSPEND, dev_name(&pdev->dev));
	wake_lock(&mehci->wlock);

	if (mehci->peripheral_status_irq) {
		ret = request_threaded_irq(mehci->peripheral_status_irq,
			NULL, hsic_peripheral_status_change,
			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
						| IRQF_SHARED,
			"hsic_peripheral_status", mehci);
		if (ret)
			dev_err(&pdev->dev, "%s:request_irq:%d failed:%d",
				__func__, mehci->peripheral_status_irq, ret);
	}

	/* configure wakeup irq */
	if (mehci->wakeup_irq) {
		ret = request_irq(mehci->wakeup_irq, msm_hsic_wakeup_irq,
				IRQF_TRIGGER_HIGH,
				"msm_hsic_wakeup", mehci);
		if (!ret) {
			disable_irq_nosync(mehci->wakeup_irq);
		} else {
			dev_err(&pdev->dev, "request_irq(%d) failed: %d\n",
					mehci->wakeup_irq, ret);
			mehci->wakeup_irq = 0;
		}
	}

	ret = ehci_hsic_msm_debugfs_init(mehci);
	if (ret)
		dev_dbg(&pdev->dev, "mode debugfs file is"
			"not available\n");

	if (pdata && pdata->bus_scale_table) {
		mehci->bus_perf_client =
		    msm_bus_scale_register_client(pdata->bus_scale_table);
		/* Configure BUS performance parameters for MAX bandwidth */
		if (mehci->bus_perf_client) {
			ret = msm_bus_scale_client_update_request(
					mehci->bus_perf_client, 1);
			if (ret)
				dev_err(&pdev->dev, "%s: Failed to vote for "
					   "bus bandwidth %d\n", __func__, ret);
		} else {
			dev_err(&pdev->dev, "%s: Failed to register BUS "
						"scaling client!!\n", __func__);
		}
	}

	__mehci = mehci;

	if (pdata && pdata->swfi_latency)
		pm_qos_add_request(&mehci->pm_qos_req_dma,
			PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE);

	/*
	 * This pdev->dev is assigned parent of root-hub by USB core,
	 * hence, runtime framework automatically calls this driver's
	 * runtime APIs based on root-hub's state.
	 */
	pm_runtime_set_active(&pdev->dev);
	pm_runtime_enable(&pdev->dev);
	/* Decrement the parent device's counter after probe.
	 * As child is active, parent will not be put into
	 * suspend mode.
	 */
	if (pdev->dev.parent)
		pm_runtime_put_sync(pdev->dev.parent);

	return 0;

unconfig_gpio:
	msm_hsic_config_gpios(mehci, 0);
deinit_vddcx:
	msm_hsic_init_vddcx(mehci, 0);
deinit_clocks:
	msm_hsic_init_clocks(mehci, 0);
unmap:
	iounmap(hcd->regs);
put_hcd:
	usb_put_hcd(hcd);

	return ret;
}

/*
 * Initialise the accelerometer and the various subsystems.
 * Should be rather independent of the bus system.
 */
int lis3lv02d_init_device(struct lis3lv02d *dev)
{
	int err;
	irq_handler_t thread_fn;
	int irq_flags = 0;

	dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I);

	switch (dev->whoami) {
	case WAI_12B:
		pr_info("12 bits sensor found\n");
		dev->read_data = lis3lv02d_read_12;
		dev->mdps_max_val = 2048;
		dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B;
		dev->odrs = lis3_12_rates;
		dev->odr_mask = CTRL1_DF0 | CTRL1_DF1;
		dev->scale = LIS3_SENSITIVITY_12B;
		dev->regs = lis3_wai12_regs;
		dev->regs_size = ARRAY_SIZE(lis3_wai12_regs);
		break;
	case WAI_8B:
		pr_info("8 bits sensor found\n");
		dev->read_data = lis3lv02d_read_8;
		dev->mdps_max_val = 128;
		dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
		dev->odrs = lis3_8_rates;
		dev->odr_mask = CTRL1_DR;
		dev->scale = LIS3_SENSITIVITY_8B;
		dev->regs = lis3_wai8_regs;
		dev->regs_size = ARRAY_SIZE(lis3_wai8_regs);
		break;
	case WAI_3DC:
		pr_info("8 bits 3DC sensor found\n");
		dev->read_data = lis3lv02d_read_8;
		dev->mdps_max_val = 128;
		dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
		dev->odrs = lis3_3dc_rates;
		dev->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
		dev->scale = LIS3_SENSITIVITY_8B;
		break;
	default:
		pr_err("unknown sensor type 0x%X\n", dev->whoami);
		return -EINVAL;
	}

	dev->reg_cache = kzalloc(max(sizeof(lis3_wai8_regs),
				     sizeof(lis3_wai12_regs)), GFP_KERNEL);

	if (dev->reg_cache == NULL) {
		printk(KERN_ERR DRIVER_NAME "out of memory\n");
		return -ENOMEM;
	}

	mutex_init(&dev->mutex);
	atomic_set(&dev->wake_thread, 0);

	lis3lv02d_add_fs(dev);
	lis3lv02d_poweron(dev);

	if (dev->pm_dev) {
		pm_runtime_set_active(dev->pm_dev);
		pm_runtime_enable(dev->pm_dev);
	}

	if (lis3lv02d_joystick_enable())
		pr_err("joystick initialization failed\n");

	/* passing in platform specific data is purely optional and only
	 * used by the SPI transport layer at the moment */
	if (dev->pdata) {
		struct lis3lv02d_platform_data *p = dev->pdata;

		if (dev->whoami == WAI_8B)
			lis3lv02d_8b_configure(dev, p);

		irq_flags = p->irq_flags1 & IRQF_TRIGGER_MASK;

		dev->irq_cfg = p->irq_cfg;
		if (p->irq_cfg)
			dev->write(dev, CTRL_REG3, p->irq_cfg);

		if (p->default_rate)
			lis3lv02d_set_odr(p->default_rate);
	}

	/* bail if we did not get an IRQ from the bus layer */
	if (!dev->irq) {
		pr_debug("No IRQ. Disabling /dev/freefall\n");
		goto out;
	}

	/*
	 * The sensor can generate interrupts for free-fall and direction
	 * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
	 * the things simple and _fast_ we activate it only for free-fall, so
	 * no need to read register (very slow with ACPI). For the same reason,
//.........这里部分代码省略.........

//.........这里部分代码省略.........
	fimc_is_scc_video_probe(core);
#endif

#ifdef SOC_SCP
	/* video entity - scp */
	fimc_is_scp_video_probe(core);
#endif

#ifdef SOC_MCS
	/* video entity - scp */
	fimc_is_m0s_video_probe(core);
	fimc_is_m1s_video_probe(core);
	fimc_is_m0p_video_probe(core);
	fimc_is_m1p_video_probe(core);
	fimc_is_m2p_video_probe(core);
	fimc_is_m3p_video_probe(core);
	fimc_is_m4p_video_probe(core);
#endif

	platform_set_drvdata(pdev, core);

#ifndef ENABLE_IS_CORE
	ret = fimc_is_interface_ischain_probe(&core->interface_ischain,
		&core->hardware,
		&core->resourcemgr,
		core->pdev,
		(ulong)core->regs);
	if (ret) {
		dev_err(&pdev->dev, "interface_ischain_probe fail\n");
		goto p_err1;
	}

	ret = fimc_is_hardware_probe(&core->hardware, &core->interface, &core->interface_ischain);
	if (ret) {
		dev_err(&pdev->dev, "hardware_probe fail\n");
		goto p_err1;
	}

	/* set sysfs for set position to actuator */
	sysfs_actuator.init_step = 0;
	for (i = 0; i < INIT_MAX_SETTING; i++) {
		sysfs_actuator.init_positions[i] = -1;
		sysfs_actuator.init_delays[i] = -1;
	}
#endif

#if defined(CONFIG_SOC_EXYNOS5430) || defined(CONFIG_SOC_EXYNOS5433)
#if defined(CONFIG_VIDEOBUF2_ION)
	if (core->resourcemgr.mem.alloc_ctx)
		vb2_ion_attach_iommu(core->resourcemgr.mem.alloc_ctx);
#endif
#endif

	EXYNOS_MIF_ADD_NOTIFIER(&exynos_fimc_is_mif_throttling_nb);

#if defined(CONFIG_PM_RUNTIME)
	pm_runtime_enable(&pdev->dev);
#endif

#ifdef ENABLE_FAULT_HANDLER
#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 9, 0))
	exynos_sysmmu_set_fault_handler(fimc_is_dev, fimc_is_fault_handler);
#else
	iovmm_set_fault_handler(fimc_is_dev, fimc_is_fault_handler, NULL);
#endif
#endif

	/* set sysfs for debuging */
	sysfs_debug.en_clk_gate = 0;
	sysfs_debug.en_dvfs = 1;
#ifdef ENABLE_CLOCK_GATE
	sysfs_debug.en_clk_gate = 1;
#ifdef HAS_FW_CLOCK_GATE
	sysfs_debug.clk_gate_mode = CLOCK_GATE_MODE_FW;
#else
	sysfs_debug.clk_gate_mode = CLOCK_GATE_MODE_HOST;
#endif
#endif
	ret = sysfs_create_group(&core->pdev->dev.kobj, &fimc_is_debug_attr_group);

	s = pinctrl_lookup_state(pdata->pinctrl, "release");

	if (pinctrl_select_state(pdata->pinctrl, s) < 0) {
		probe_err("pinctrl_select_state is fail\n");
		goto p_err3;
	}

	probe_info("%s:end\n", __func__);
	return 0;

p_err3:
	iounmap(core->regs);
#if defined (ENABLE_IS_CORE) || defined (USE_MCUCTL)
p_err2:
	release_mem_region(regs_res->start, resource_size(regs_res));
#endif
p_err1:
	kfree(core);
	return ret;
}

//.........这里部分代码省略.........
	if (sm == ACPI_TPM2_MEMORY_MAPPED)
		return -ENODEV;

	priv = devm_kzalloc(dev, sizeof(struct crb_priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	if (sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) {
		if (buf->header.length < (sizeof(*buf) + sizeof(*crb_smc))) {
			dev_err(dev,
				FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n",
				buf->header.length,
				ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC);
			return -EINVAL;
		}
		crb_smc = ACPI_ADD_PTR(struct tpm2_crb_smc, buf, sizeof(*buf));
		priv->smc_func_id = crb_smc->smc_func_id;
	}

	priv->sm = sm;
	priv->hid = acpi_device_hid(device);

	rc = crb_map_io(device, priv, buf);
	if (rc)
		return rc;

	chip = tpmm_chip_alloc(dev, &tpm_crb);
	if (IS_ERR(chip))
		return PTR_ERR(chip);

	dev_set_drvdata(&chip->dev, priv);
	chip->acpi_dev_handle = device->handle;
	chip->flags = TPM_CHIP_FLAG_TPM2;

	rc = __crb_request_locality(dev, priv, 0);
	if (rc)
		return rc;

	rc  = crb_cmd_ready(dev, priv);
	if (rc)
		goto out;

	pm_runtime_get_noresume(dev);
	pm_runtime_set_active(dev);
	pm_runtime_enable(dev);

	rc = tpm_chip_register(chip);
	if (rc) {
		crb_go_idle(dev, priv);
		pm_runtime_put_noidle(dev);
		pm_runtime_disable(dev);
		goto out;
	}

	pm_runtime_put_sync(dev);

out:
	__crb_relinquish_locality(dev, priv, 0);

	return rc;
}

static int crb_acpi_remove(struct acpi_device *device)
{
	struct device *dev = &device->dev;
	struct tpm_chip *chip = dev_get_drvdata(dev);

	tpm_chip_unregister(chip);

	pm_runtime_disable(dev);

	return 0;
}

static int __maybe_unused crb_pm_runtime_suspend(struct device *dev)
{
	struct tpm_chip *chip = dev_get_drvdata(dev);
	struct crb_priv *priv = dev_get_drvdata(&chip->dev);

	return crb_go_idle(dev, priv);
}

static int __maybe_unused crb_pm_runtime_resume(struct device *dev)
{
	struct tpm_chip *chip = dev_get_drvdata(dev);
	struct crb_priv *priv = dev_get_drvdata(&chip->dev);

	return crb_cmd_ready(dev, priv);
}

static int __maybe_unused crb_pm_suspend(struct device *dev)
{
	int ret;

	ret = tpm_pm_suspend(dev);
	if (ret)
		return ret;

	return crb_pm_runtime_suspend(dev);
}

//.........这里部分代码省略.........
			return ret;
	}

	up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
	if (!up)
		return -ENOMEM;

	if (gpio_is_valid(omap_up_info->DTR_gpio) &&
	    omap_up_info->DTR_present) {
		up->DTR_gpio = omap_up_info->DTR_gpio;
		up->DTR_inverted = omap_up_info->DTR_inverted;
	} else
		up->DTR_gpio = -EINVAL;
	up->DTR_active = 0;

	up->dev = &pdev->dev;
	up->port.dev = &pdev->dev;
	up->port.type = PORT_OMAP;
	up->port.iotype = UPIO_MEM;
	up->port.irq = irq->start;

	up->port.regshift = 2;
	up->port.fifosize = 64;
	up->port.ops = &serial_omap_pops;

	if (pdev->dev.of_node)
		up->port.line = of_alias_get_id(pdev->dev.of_node, "serial");
	else
		up->port.line = pdev->id;

	if (up->port.line < 0) {
		dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n",
								up->port.line);
		ret = -ENODEV;
		goto err_port_line;
	}

	up->pins = devm_pinctrl_get_select_default(&pdev->dev);
	if (IS_ERR(up->pins)) {
		dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n",
			 up->port.line, PTR_ERR(up->pins));
		up->pins = NULL;
	}

	sprintf(up->name, "OMAP UART%d", up->port.line);
	up->port.mapbase = mem->start;
	up->port.membase = devm_ioremap(&pdev->dev, mem->start,
						resource_size(mem));
	if (!up->port.membase) {
		dev_err(&pdev->dev, "can't ioremap UART\n");
		ret = -ENOMEM;
		goto err_ioremap;
	}

	up->port.flags = omap_up_info->flags;
	up->port.uartclk = omap_up_info->uartclk;
	if (!up->port.uartclk) {
		up->port.uartclk = DEFAULT_CLK_SPEED;
		dev_warn(&pdev->dev, "No clock speed specified: using default:"
						"%d\n", DEFAULT_CLK_SPEED);
	}

	up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
	up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
	pm_qos_add_request(&up->pm_qos_request,
		PM_QOS_CPU_DMA_LATENCY, up->latency);
	serial_omap_uart_wq = create_singlethread_workqueue(up->name);
	INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);

	platform_set_drvdata(pdev, up);
	pm_runtime_enable(&pdev->dev);
	pm_runtime_use_autosuspend(&pdev->dev);
	pm_runtime_set_autosuspend_delay(&pdev->dev,
			omap_up_info->autosuspend_timeout);

	pm_runtime_irq_safe(&pdev->dev);
	pm_runtime_get_sync(&pdev->dev);

	omap_serial_fill_features_erratas(up);

	ui[up->port.line] = up;
	serial_omap_add_console_port(up);

	ret = uart_add_one_port(&serial_omap_reg, &up->port);
	if (ret != 0)
		goto err_add_port;

	pm_runtime_mark_last_busy(up->dev);
	pm_runtime_put_autosuspend(up->dev);
	return 0;

err_add_port:
	pm_runtime_put(&pdev->dev);
	pm_runtime_disable(&pdev->dev);
err_ioremap:
err_port_line:
	dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
				pdev->id, __func__, ret);
	return ret;
}

static int __devinit ehci_msm_probe(struct platform_device *pdev)
{
	struct usb_hcd *hcd;
	struct resource *res;
	struct msm_usb_host_platform_data *pdata;
	int retval;
	struct msmusb_hcd *mhcd;

	hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev));
	if (!hcd)
		return  -ENOMEM;

	hcd->irq = platform_get_irq(pdev, 0);
	if (hcd->irq < 0) {
		usb_put_hcd(hcd);
		return hcd->irq;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		usb_put_hcd(hcd);
		return -ENODEV;
	}

	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);

	mhcd = hcd_to_mhcd(hcd);
	spin_lock_init(&mhcd->lock);
	mhcd->in_lpm = 0;
	mhcd->running = 0;
	device_init_wakeup(&pdev->dev, 1);

	pdata = pdev->dev.platform_data;
	if (PHY_TYPE(pdata->phy_info) == USB_PHY_UNDEFINED) {
		usb_put_hcd(hcd);
		return -ENODEV;
	}
	hcd->power_budget = pdata->power_budget;
	mhcd->pdata = pdata;
	INIT_WORK(&mhcd->lpm_exit_work, usb_lpm_exit_w);

	wake_lock_init(&mhcd->wlock, WAKE_LOCK_SUSPEND, dev_name(&pdev->dev));
	pdata->ebi1_clk = clk_get(&pdev->dev, "core_clk");
	if (IS_ERR(pdata->ebi1_clk))
		pdata->ebi1_clk = NULL;
	else
		clk_set_rate(pdata->ebi1_clk, INT_MAX);

#ifdef CONFIG_USB_HOST_NOTIFY
		if (pdata->host_notify) {
			hcd->host_notify = pdata->host_notify;
			hcd->ndev.name = dev_name(&pdev->dev);
			retval = host_notify_dev_register(&hcd->ndev);
			if (retval) {
				dev_err(&pdev->dev, "Failed to host_notify_dev_register\n");
				return -ENODEV;
			}
		}
#endif
	retval = msm_xusb_init_host(pdev, mhcd);

	if (retval < 0) {
		wake_lock_destroy(&mhcd->wlock);
		usb_put_hcd(hcd);
		clk_put(pdata->ebi1_clk);
	}

	pm_runtime_enable(&pdev->dev);

	return retval;
}

//.........这里部分代码省略.........
	if (ret) {
		dev_err(dev, "could not register v4l2 device.\n");
		goto fail_regs;
	}

	drv_data = (struct hdmi_driver_data *)
		platform_get_device_id(pdev)->driver_data;
	dev_info(dev, "hdmiphy i2c bus number = %d\n", drv_data->hdmiphy_bus);

	phy_adapter = i2c_get_adapter(drv_data->hdmiphy_bus);
	if (phy_adapter == NULL) {
		dev_err(dev, "adapter request failed\n");
		ret = -ENXIO;
		goto fail_vdev;
	}

	hdmi_dev->phy_sd = v4l2_i2c_new_subdev_board(&hdmi_dev->v4l2_dev,
		phy_adapter, &hdmiphy_info, NULL);
	/* on failure or not adapter is no longer useful */
	i2c_put_adapter(phy_adapter);
	if (hdmi_dev->phy_sd == NULL) {
		dev_err(dev, "missing subdev for hdmiphy\n");
		ret = -ENODEV;
		goto fail_vdev;
	}

	/* HDMI PHY power off
	 * HDMI PHY is on as default configuration
	 * So, HDMI PHY must be turned off if it's not used */
	clk_enable(hdmi_dev->res.hdmiphy);
	v4l2_subdev_call(hdmi_dev->phy_sd, core, s_power, 0);
	clk_disable(hdmi_dev->res.hdmiphy);

	pm_runtime_enable(dev);

	/* irq setting by TV power on/off status */
	if (!pm_runtime_suspended(hdmi_dev->dev)) {
		hdmi_dev->curr_irq = hdmi_dev->int_irq;
		irq_type = 0;
		s5p_v4l2_int_src_hdmi_hpd();
	} else {
		if (s5p_v4l2_hpd_read_gpio())
			atomic_set(&hdmi_dev->hpd_state, HPD_HIGH);
		else
			atomic_set(&hdmi_dev->hpd_state, HPD_LOW);
		hdmi_dev->curr_irq = hdmi_dev->ext_irq;
		irq_type = IRQ_TYPE_EDGE_BOTH;
		s5p_v4l2_int_src_ext_hpd();
	}

	hdmi_dev->hpd_user_checked = false;

	ret = request_irq(hdmi_dev->curr_irq, hdmi_irq_handler,
			irq_type, "hdmi", hdmi_dev);

	if (ret) {
		dev_err(dev, "request interrupt failed.\n");
		goto fail_vdev;
	}

	hdmi_dev->cur_preset = HDMI_DEFAULT_PRESET;
	/* FIXME: missing fail preset is not supported */
	hdmi_dev->cur_conf = hdmi_preset2conf(hdmi_dev->cur_preset);

	/* default audio configuration : enable audio */
	hdmi_dev->audio_enable = 1;

//.........这里部分代码省略.........
	const char *hid;
	const char *uid;
	int err;

	if (acpi_bus_get_device(handle, &device))
		return -ENODEV;

	if (acpi_bus_get_status(device) || !device->status.present)
		return -ENODEV;

	if (sdhci_acpi_byt_defer(dev))
		return -EPROBE_DEFER;

	hid = acpi_device_hid(device);
	uid = device->pnp.unique_id;

	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!iomem)
		return -ENOMEM;

	len = resource_size(iomem);
	if (len < 0x100)
		dev_err(dev, "Invalid iomem size!\n");

	if (!devm_request_mem_region(dev, iomem->start, len, dev_name(dev)))
		return -ENOMEM;

	host = sdhci_alloc_host(dev, sizeof(struct sdhci_acpi_host));
	if (IS_ERR(host))
		return PTR_ERR(host);

	c = sdhci_priv(host);
	c->host = host;
	c->slot = sdhci_acpi_get_slot(hid, uid);
	c->pdev = pdev;
	c->use_runtime_pm = sdhci_acpi_flag(c, SDHCI_ACPI_RUNTIME_PM);

	platform_set_drvdata(pdev, c);

	host->hw_name	= "ACPI";
	host->ops	= &sdhci_acpi_ops_dflt;
	host->irq	= platform_get_irq(pdev, 0);

	host->ioaddr = devm_ioremap_nocache(dev, iomem->start,
					    resource_size(iomem));
	if (host->ioaddr == NULL) {
		err = -ENOMEM;
		goto err_free;
	}

	if (c->slot) {
		if (c->slot->probe_slot) {
			err = c->slot->probe_slot(pdev, hid, uid);
			if (err)
				goto err_free;
		}
		if (c->slot->chip) {
			host->ops            = c->slot->chip->ops;
			host->quirks        |= c->slot->chip->quirks;
			host->quirks2       |= c->slot->chip->quirks2;
			host->mmc->caps     |= c->slot->chip->caps;
			host->mmc->caps2    |= c->slot->chip->caps2;
			host->mmc->pm_caps  |= c->slot->chip->pm_caps;
		}
		host->quirks        |= c->slot->quirks;
		host->quirks2       |= c->slot->quirks2;
		host->mmc->caps     |= c->slot->caps;
		host->mmc->caps2    |= c->slot->caps2;
		host->mmc->pm_caps  |= c->slot->pm_caps;
	}

	host->mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;

	if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) {
		bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL);

		if (mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0, NULL)) {
			dev_warn(dev, "failed to setup card detect gpio\n");
			c->use_runtime_pm = false;
		}
	}

	err = sdhci_add_host(host);
	if (err)
		goto err_free;

	if (c->use_runtime_pm) {
		pm_runtime_set_active(dev);
		pm_suspend_ignore_children(dev, 1);
		pm_runtime_set_autosuspend_delay(dev, 50);
		pm_runtime_use_autosuspend(dev);
		pm_runtime_enable(dev);
	}

	return 0;

err_free:
	sdhci_free_host(c->host);
	return err;
}