C++ pm_restore_gfp_mask函数代码示例

/**
 * hibernation_restore - Quiesce devices and restore from a hibernation image.
 * @platform_mode: If set, use platform driver to prepare for the transition.
 *
 * This routine must be called with pm_mutex held.  If it is successful, control
 * reappears in the restored target kernel in hibernation_snapshot().
 */
int hibernation_restore(int platform_mode)
{
	int error;

	pm_prepare_console();
	suspend_console();
	ftrace_stop();
	pm_restrict_gfp_mask();
	error = dpm_suspend_start(PMSG_QUIESCE);
	if (!error) {
		error = resume_target_kernel(platform_mode);
		/*
		 * The above should either succeed and jump to the new kernel,
		 * or return with an error. Otherwise things are just
		 * undefined, so let's be paranoid.
		 */
		BUG_ON(!error);
	}
	dpm_resume_end(PMSG_RECOVER);
	pm_restore_gfp_mask();
	ftrace_start();
	resume_console();
	pm_restore_console();
	return error;
}

/**
 *	enter_state - Do common work of entering low-power state.
 *	@state:		pm_state structure for state we're entering.
 *
 *	Make sure we're the only ones trying to enter a sleep state. Fail
 *	if someone has beat us to it, since we don't want anything weird to
 *	happen when we wake up.
 *	Then, do the setup for suspend, enter the state, and cleaup (after
 *	we've woken up).
 */
int enter_state(suspend_state_t state)
{
	int error;
	struct task_struct *cpu_task;

	if (!valid_state(state))
		return -ENODEV;

	if (!mutex_trylock(&pm_mutex))
		return -EBUSY;

	/*
	 * Assure that previous started thread is completed before
	 * attempting to suspend again.
	 */
	error = wait_for_completion_timeout(&second_cpu_complete,
					    msecs_to_jiffies(500));
	WARN_ON(error == 0);
#ifdef CONFIG_PM_SYNC_CTRL
	if (pm_sync_active) {
;
		sys_sync();
;
	}
#else
;
	sys_sync();
;
#endif

	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
	error = suspend_prepare();
	if (error)
		goto Unlock;

	if (suspend_test(TEST_FREEZER))
		goto Finish;

	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
	pm_restrict_gfp_mask();
	error = suspend_devices_and_enter(state);
	pm_restore_gfp_mask();

 Finish:
	pr_debug("PM: Finishing wakeup.\n");
	suspend_finish();
 Unlock:

	cpu_task = kthread_run(plug_secondary_cpus,
			       NULL, "cpu-plug");
	BUG_ON(IS_ERR(cpu_task));

	mutex_unlock(&pm_mutex);
	return error;
}

/**
 * enter_state - Do common work needed to enter system sleep state.
 * @state: System sleep state to enter.
 *
 * Make sure that no one else is trying to put the system into a sleep state.
 * Fail if that's not the case.  Otherwise, prepare for system suspend, make the
 * system enter the given sleep state and clean up after wakeup.
 */
static int enter_state(suspend_state_t state)
{
	int error;

	trace_suspend_resume(TPS("suspend_enter"), state, true);
	if (state == PM_SUSPEND_TO_IDLE) {
#ifdef CONFIG_PM_DEBUG
		if (pm_test_level != TEST_NONE && pm_test_level <= TEST_CPUS) {
			pr_warn("Unsupported test mode for suspend to idle, please choose none/freezer/devices/platform.\n");
			return -EAGAIN;
		}
#endif
	} else if (!valid_state(state)) {
		return -EINVAL;
	}
	if (!mutex_trylock(&system_transition_mutex))
		return -EBUSY;

	if (state == PM_SUSPEND_TO_IDLE)
		s2idle_begin();

#ifndef CONFIG_SUSPEND_SKIP_SYNC
	trace_suspend_resume(TPS("sync_filesystems"), 0, true);
	pr_info("Syncing filesystems ... ");
	ksys_sync();
	pr_cont("done.\n");
	trace_suspend_resume(TPS("sync_filesystems"), 0, false);
#endif

	pm_pr_dbg("Preparing system for sleep (%s)\n", mem_sleep_labels[state]);
	pm_suspend_clear_flags();
	error = suspend_prepare(state);
	if (error)
		goto Unlock;

	if (suspend_test(TEST_FREEZER))
		goto Finish;

	trace_suspend_resume(TPS("suspend_enter"), state, false);
	pm_pr_dbg("Suspending system (%s)\n", mem_sleep_labels[state]);
	pm_restrict_gfp_mask();
	error = suspend_devices_and_enter(state);
	pm_restore_gfp_mask();

 Finish:
	events_check_enabled = false;
	pm_pr_dbg("Finishing wakeup.\n");
	suspend_finish();
 Unlock:
	mutex_unlock(&system_transition_mutex);
	return error;
}

/**
 * enter_state - Do common work needed to enter system sleep state.
 * @state: System sleep state to enter.
 *
 * Make sure that no one else is trying to put the system into a sleep state.
 * Fail if that's not the case.  Otherwise, prepare for system suspend, make the
 * system enter the given sleep state and clean up after wakeup.
 */
static int enter_state(suspend_state_t state)
{
	int error;

	if (state == PM_SUSPEND_FREEZE) {
#ifdef CONFIG_PM_DEBUG
		if (pm_test_level != TEST_NONE && pm_test_level <= TEST_CPUS) {
			pr_warning("PM: Unsupported test mode for freeze state,"
				   "please choose none/freezer/devices/platform.\n");
			return -EAGAIN;
		}
#endif
	} else if (!valid_state(state)) {
		return -EINVAL;
	}
	if (!mutex_trylock(&pm_mutex))
		return -EBUSY;

	if (state == PM_SUSPEND_FREEZE)
		freeze_begin();

#ifdef CONFIG_HAS_EARLYSUSPEND
	if (suspendsync)
		suspend_sys_sync_queue();
#else
	if (suspendsync) {
		printk(KERN_INFO "PM: Syncing filesystems ... ");
		sys_sync();
		printk("done.\n");
	}
#endif

	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state].label);
	error = suspend_prepare(state);
	if (error)
		goto Unlock;

	if (suspend_test(TEST_FREEZER))
		goto Finish;

	pr_debug("PM: Entering %s sleep\n", pm_states[state].label);
	pm_restrict_gfp_mask();
	error = suspend_devices_and_enter(state);
	pm_restore_gfp_mask();

 Finish:
	pr_debug("PM: Finishing wakeup.\n");
	suspend_finish();
 Unlock:
	mutex_unlock(&pm_mutex);
	return error;
}

/**
 * enter_state - Do common work needed to enter system sleep state.
 * @state: System sleep state to enter.
 *
 * Make sure that no one else is trying to put the system into a sleep state.
 * Fail if that's not the case.  Otherwise, prepare for system suspend, make the
 * system enter the given sleep state and clean up after wakeup.
 */
static int enter_state(suspend_state_t state)
{
	int error;

	trace_suspend_resume(TPS("suspend_enter"), state, true);
	if (state == PM_SUSPEND_FREEZE) {
#ifdef CONFIG_PM_DEBUG
		if (pm_test_level != TEST_NONE && pm_test_level <= TEST_CPUS) {
			pr_warning("PM: Unsupported test mode for suspend to idle,"
				   "please choose none/freezer/devices/platform.\n");
			return -EAGAIN;
		}
#endif
	} else if (!valid_state(state)) {
		return -EINVAL;
	}
	if (!mutex_trylock(&pm_mutex))
		return -EBUSY;

	if (state == PM_SUSPEND_FREEZE)
		freeze_begin();

	trace_suspend_resume(TPS("sync_filesystems"), 0, true);
	printk(KERN_INFO "PM: Syncing filesystems ... ");
	sys_sync();
	printk("done.\n");
	trace_suspend_resume(TPS("sync_filesystems"), 0, false);

	pr_debug("PM: Preparing system for sleep (%s)\n", pm_states[state]);
	error = suspend_prepare(state);
	if (error)
		goto Unlock;

	if (suspend_test(TEST_FREEZER))
		goto Finish;

	trace_suspend_resume(TPS("suspend_enter"), state, false);
	pr_debug("PM: Suspending system (%s)\n", pm_states[state]);
	pm_restrict_gfp_mask();
	error = suspend_devices_and_enter(state);
	pm_restore_gfp_mask();

 Finish:
	pr_debug("PM: Finishing wakeup.\n");
	suspend_finish();
 Unlock:
	mutex_unlock(&pm_mutex);
	return error;
}

/**
 * hibernation_restore - Quiesce devices and restore from a hibernation image.
 * @platform_mode: If set, use platform driver to prepare for the transition.
 *
 * This routine must be called with pm_mutex held.  If it is successful, control
 * reappears in the restored target kernel in hibernation_snapshot().
 */
int hibernation_restore(int platform_mode)
{
	int error;

	pm_prepare_console();
	suspend_console();
	pm_restrict_gfp_mask();
	error = dpm_suspend_start(PMSG_QUIESCE);
	if (!error) {
		error = resume_target_kernel(platform_mode);
		dpm_resume_end(PMSG_RECOVER);
	}
	pm_restore_gfp_mask();
	resume_console();
	pm_restore_console();
	return error;
}

/**
 *	suspend_devices_and_enter - suspend devices and enter the desired system
 *				    sleep state.
 *	@state:		  state to enter
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;

	if (!suspend_ops)
		return -ENOSYS;

	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	pm_restrict_gfp_mask();
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	suspend_enter(state);

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
	ktime_resume_endtime=ktime_get();
	printk(KERN_ERR "<POWER>resume6[peripheral resume]take %llu ns\n",ktime_to_ns(ktime_sub(ktime_resume_endtime, ktime_resume_fromtime)));
	ktime_resume_fromtime=ktime_resume_endtime;
	suspend_test_finish("resume devices");
	pm_restore_gfp_mask();
	resume_console();
 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}

/**
 * enter_state - Do common work needed to enter system sleep state.
 * @state: System sleep state to enter.
 *
 * Make sure that no one else is trying to put the system into a sleep state.
 * Fail if that's not the case.  Otherwise, prepare for system suspend, make the
 * system enter the given sleep state and clean up after wakeup.
 */
static int enter_state(suspend_state_t state)
{
    int error;

    if (!valid_state(state))
        return -ENODEV;

    if (!mutex_trylock(&pm_mutex))
        return -EBUSY;

    if (state == PM_SUSPEND_FREEZE)
        freeze_begin();

#ifndef CONFIG_ARCH_HI3630

    printk(KERN_INFO "PM: Syncing filesystems ... ");
    sys_sync();
    printk("done.\n");

#else

    hisi_sys_sync_queue();

#endif

    pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
    error = suspend_prepare(state);
    if (error)
        goto Unlock;

    if (suspend_test(TEST_FREEZER))
        goto Finish;

    pr_debug("PM: Entering %s sleep\n", pm_states[state]);
    pm_restrict_gfp_mask();
    error = suspend_devices_and_enter(state);
    pm_restore_gfp_mask();

Finish:
    pr_debug("PM: Finishing wakeup.\n");
    suspend_finish();
Unlock:
    mutex_unlock(&pm_mutex);
    return error;
}

/**
 * enter_state - Do common work needed to enter system sleep state.
 * @state: System sleep state to enter.
 *
 * Make sure that no one else is trying to put the system into a sleep state.
 * Fail if that's not the case.  Otherwise, prepare for system suspend, make the
 * system enter the given sleep state and clean up after wakeup.
 */
static int enter_state(suspend_state_t state)
{
	int error;

	if (!valid_state(state))
		return -ENODEV;

	if (!mutex_trylock(&pm_mutex))
		return -EBUSY;

	if (state == PM_SUSPEND_FREEZE)
		freeze_begin();

	printk(KERN_INFO "PM: Syncing filesystems ... ");
	sys_sync();
	printk("done.\n");

	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
	error = suspend_prepare(state);
	if (error)
		goto Unlock;

	if (suspend_test(TEST_FREEZER))
		goto Finish;

	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
	pm_restrict_gfp_mask();
	error = suspend_devices_and_enter(state);
	pm_restore_gfp_mask();

 Finish:
	pr_debug("PM: Finishing wakeup.\n");
#ifdef CONFIG_MACH_LGE
	start_monitor_blocking(suspend_monitor_id,
		jiffies + usecs_to_jiffies(3000000));
#endif
	suspend_finish();
#ifdef CONFIG_MACH_LGE
	end_monitor_blocking(suspend_monitor_id);
#endif
 Unlock:
	mutex_unlock(&pm_mutex);
	return error;
}

/**
 *	suspend_devices_and_enter - suspend devices and enter the desired system
 *				    sleep state.
 *	@state:		  state to enter
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;

	if (!suspend_ops)
		return -ENOSYS;

	trace_machine_suspend(state);
	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	pm_restrict_gfp_mask();
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	suspend_enter(state);

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
	suspend_test_finish("resume devices");
	pm_restore_gfp_mask();
	resume_console();
 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	trace_machine_suspend(PWR_EVENT_EXIT);
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}

/**
 *	enter_state - Do common work of entering low-power state.
 *	@state:		pm_state structure for state we're entering.
 *
 *	Make sure we're the only ones trying to enter a sleep state. Fail
 *	if someone has beat us to it, since we don't want anything weird to
 *	happen when we wake up.
 *	Then, do the setup for suspend, enter the state, and cleaup (after
 *	we've woken up).
 */
int enter_state(suspend_state_t state)
{
	int error;

	if (!valid_state(state))
		return -ENODEV;

	if (!mutex_trylock(&pm_mutex))
		return -EBUSY;

	printk(KERN_INFO "PM: Syncing filesystems ... ");
	sys_sync();
	printk("done.\n");

	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
	error = suspend_prepare();
	if (error)
		goto Unlock;

	if (suspend_test(TEST_FREEZER))
		goto Finish;
	
	meson_lock_min_cpufreq(336000);
	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
	pm_restrict_gfp_mask();
	error = suspend_devices_and_enter(state);
	pm_restore_gfp_mask();
	meson_lock_min_cpufreq(0);

 Finish:
	pr_debug("PM: Finishing wakeup.\n");
	suspend_finish();
 Unlock:
 	
	mutex_unlock(&pm_mutex);
#ifdef CONFIG_SUSPEND_WATCHDOG
	extern void disable_watchdog(void);
	disable_watchdog();
#endif   	
	return error;
}

/**
 *	enter_state - Do common work of entering low-power state.
 *	@state:		pm_state structure for state we're entering.
 *
 *	Make sure we're the only ones trying to enter a sleep state. Fail
 *	if someone has beat us to it, since we don't want anything weird to
 *	happen when we wake up.
 *	Then, do the setup for suspend, enter the state, and cleaup (after
 *	we've woken up).
 */
int enter_state(suspend_state_t state)
{
	int error;
	struct timer_list timer;
	struct pm_wd_data data;

	if (!valid_state(state))
		return -ENODEV;

	if (!mutex_trylock(&pm_mutex))
		return -EBUSY;

	printk(KERN_INFO "PM: Syncing filesystems ... ");
	sys_sync();
	printk("done.\n");

	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
	error = suspend_prepare();
	if (error)
		goto Unlock;

	if (suspend_test(TEST_FREEZER))
		goto Finish;

	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
	pm_restrict_gfp_mask();
	error = suspend_devices_and_enter(state);
	pm_restore_gfp_mask();

 Finish:
	pm_wd_add_timer(&timer, &data, 15);

	pr_debug("PM: Finishing wakeup.\n");
	suspend_finish();

	pm_wd_del_timer(&timer);
 Unlock:
	mutex_unlock(&pm_mutex);
	return error;
}

/**
 *	enter_state - Do common work of entering low-power state.
 *	@state:		pm_state structure for state we're entering.
 *
 *	Make sure we're the only ones trying to enter a sleep state. Fail
 *	if someone has beat us to it, since we don't want anything weird to
 *	happen when we wake up.
 *	Then, do the setup for suspend, enter the state, and cleaup (after
 *	we've woken up).
 */
int enter_state(suspend_state_t state)
{
    int error;

    if (!valid_state(state))
        return -ENODEV;

    if (!mutex_trylock(&pm_mutex))
        return -EBUSY;

#ifdef CONFIG_MSM_SM_EVENT
    sm_set_system_state (SM_STATE_SUSPEND);
    sm_add_event(SM_POWER_EVENT | SM_POWER_EVENT_SUSPEND, SM_EVENT_START, 0, NULL, 0);
#endif
    suspend_sys_sync_queue();

    pr_info("PM: Preparing system for %s sleep\n", pm_states[state]);
    error = suspend_prepare();
    if (error)
        goto Unlock;

    if (suspend_test(TEST_FREEZER))
        goto Finish;

    pr_info("PM: Entering %s sleep\n", pm_states[state]);
    pm_restrict_gfp_mask();
    error = suspend_devices_and_enter(state);
    pm_restore_gfp_mask();

Finish:
    pr_info("PM: Finishing wakeup.\n");
    suspend_finish();
Unlock:
    mutex_unlock(&pm_mutex);

#ifdef CONFIG_MSM_SM_EVENT
    sm_add_event(SM_POWER_EVENT | SM_POWER_EVENT_RESUME, SM_EVENT_END, 0, NULL, 0);
#endif
    return error;
}

static int snapshot_release(struct inode *inode, struct file *filp)
{
	struct snapshot_data *data;

	lock_system_sleep();

	swsusp_free();
	free_basic_memory_bitmaps();
	data = filp->private_data;
	free_all_swap_pages(data->swap);
	if (data->frozen) {
		pm_restore_gfp_mask();
		thaw_processes();
	}
	pm_notifier_call_chain(data->mode == O_RDONLY ?
			PM_POST_HIBERNATION : PM_POST_RESTORE);
	atomic_inc(&snapshot_device_available);

	unlock_system_sleep();

	return 0;
}

/**
 *	enter_state - Do common work of entering low-power state.
 *	@state:		pm_state structure for state we're entering.
 *
 *	Make sure we're the only ones trying to enter a sleep state. Fail
 *	if someone has beat us to it, since we don't want anything weird to
 *	happen when we wake up.
 *	Then, do the setup for suspend, enter the state, and cleaup (after
 *	we've woken up).
 */
int enter_state(suspend_state_t state)
{
	int error;

	if (!valid_state(state))
		return -ENODEV;

	if (!mutex_trylock(&pm_mutex))
		return -EBUSY;

	resume_from_deep_suspend = 0;
	printk(KERN_INFO "PM: Syncing filesystems ... ");
	sys_sync();
	printk("done.\n");

	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
	warn_timeout(SUSPEND_PREPARE_TIMEOUT,
			error = suspend_prepare()
		);

	if (error)
		goto Unlock;

	if (suspend_test(TEST_FREEZER))
		goto Finish;

	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
	pm_restrict_gfp_mask();
	error = suspend_devices_and_enter(state);
	pm_restore_gfp_mask();

 Finish:
	pr_debug("PM: Finishing wakeup.\n");
	suspend_finish();
 Unlock:
	mutex_unlock(&pm_mutex);
	return error;
}