C++ pcap_strerror函数代码示例

static inline int
bpf_open(pcap_t *p, char *errbuf)
{
	int fd;
	int n = 0;
	char device[sizeof "/dev/bpf000"];

	/*
	 * Go through all the minors and find one that isn't in use.
	 */
	do {
		(void)sprintf(device, "/dev/bpf%d", n++);
		fd = open(device, O_RDONLY);
	} while (fd < 0 && errno == EBUSY);

	/*
	 * XXX better message for all minors used
	 */
	if (fd < 0)
		sprintf(errbuf, "%s: %s", device, pcap_strerror(errno));

	return (fd);
}

static int
read_bytes(FILE *fp, void *buf, size_t bytes_to_read, int fail_on_eof,
    char *errbuf)
{
	size_t amt_read;

	amt_read = fread(buf, 1, bytes_to_read, fp);
	if (amt_read != bytes_to_read) {
		if (ferror(fp)) {
			snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "error reading dump file: %s",
			    pcap_strerror(errno));
		} else {
			if (amt_read == 0 && !fail_on_eof)
				return (0);	/* EOF */
			snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "truncated dump file; tried to read %lu bytes, only got %lu",
			    (unsigned long)bytes_to_read,
			    (unsigned long)amt_read);
		}
		return (-1);
	}
	return (1);
}

int
pcap_findalldevs(pcap_if_t **alldevsp, char *errbuf)
{
	pcap_if_t *devlist = NULL;
	struct ifaddrs *ifap, *ifa;
	struct sockaddr *broadaddr, *dstaddr;
	int ret = 0;

	/*
	 * Get the list of interface addresses.
	 *
	 * Note: this won't return information about interfaces
	 * with no addresses; are there any such interfaces
	 * that would be capable of receiving packets?
	 * (Interfaces incapable of receiving packets aren't
	 * very interesting from libpcap's point of view.)
	 *
	 * LAN interfaces will probably have link-layer
	 * addresses; I don't know whether all implementations
	 * of "getifaddrs()" now, or in the future, will return
	 * those.
	 */
	if (getifaddrs(&ifap) != 0) {
		(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
		    "getifaddrs: %s", pcap_strerror(errno));
		return (-1);
	}
	for (ifa = ifap; ifa != NULL; ifa = ifa->ifa_next) {
		/*
		 * Is this interface up?
		 */
		if (!(ifa->ifa_flags & IFF_UP)) {
			/*
			 * No, so don't add it to the list.
			 */
			continue;
		}

		/*
		 * "ifa_broadaddr" may be non-null even on
		 * non-broadcast interfaces; "ifa_dstaddr"
		 * was, on at least one FreeBSD 4.1 system,
		 * non-null on a non-point-to-point
		 * interface.
		 */
		if (ifa->ifa_flags & IFF_BROADCAST)
			broadaddr = ifa->ifa_broadaddr;
		else
			broadaddr = NULL;
		if (ifa->ifa_flags & IFF_POINTOPOINT)
			dstaddr = ifa->ifa_dstaddr;
		else
			dstaddr = NULL;

		/*
		 * Add information for this address to the list.
		 */
		if (add_addr_to_iflist(&devlist, ifa->ifa_name,
		    ifa->ifa_flags, ifa->ifa_addr, ifa->ifa_netmask,
		    broadaddr, dstaddr, errbuf) < 0) {
			ret = -1;
			break;
		}
	}

	freeifaddrs(ifap);

	if (ret != -1) {
		/*
		 * We haven't had any errors yet; add the "any" device,
		 * if we can open it.
		 */
		if (pcap_add_if(&devlist, "any", 0, any_descr, errbuf) < 0)
			ret = -1;
	}

	if (ret == -1) {
		/*
		 * We had an error; free the list we've been constructing.
		 */
		if (devlist != NULL) {
			pcap_freealldevs(devlist);
			devlist = NULL;
		}
	}

	*alldevsp = devlist;
	return (ret);
}

//.........这里部分代码省略.........
				goto error;
			};
		}
	}

	// If it comes here, it means that we have an authentication request message
	if ( (nread= sock_recv(sockctrl, (char *) &auth, sizeof(struct rpcap_auth), SOCK_RECEIVEALL_YES, errbuf, PCAP_ERRBUF_SIZE)) == -1)
	{
		retcode= -1;
		goto error;
	}

	switch (ntohs(auth.type) )
	{
		case RPCAP_RMTAUTH_NULL:
		{
			if (!nullAuthAllowed)
			{
				snprintf(errbuf, PCAP_ERRBUF_SIZE, "Authentication failed; NULL autentication not permitted.");
				retcode= -2;
				goto error;
			}
			break;
		}

		case RPCAP_RMTAUTH_PWD:
		{
		int len1, len2;

			len1= ntohs(auth.slen1);
			len2= ntohs(auth.slen2);

			string1= (char *) malloc (len1 + 1);
			string2= (char *) malloc (len2 + 1);

			if ( (string1 == NULL) || (string2 == NULL) )
			{
				snprintf(errbuf, PCAP_ERRBUF_SIZE, "malloc() failed: %s", pcap_strerror(errno));
				retcode= -1;
				goto error;
			}

			if ( (nread+= sock_recv(sockctrl, string1, len1, SOCK_RECEIVEALL_YES, errbuf, PCAP_ERRBUF_SIZE)) == -1)
			{
				retcode= -1;
				goto error;
			}
			if ( (nread+= sock_recv(sockctrl, string2, len2, SOCK_RECEIVEALL_YES, errbuf, PCAP_ERRBUF_SIZE)) == -1)
			{
				retcode= -1;
				goto error;
			}

			string1[len1]= 0;
			string2[len2]= 0;

			if (daemon_AuthUserPwd(string1, string2, errbuf) )
			{
				retcode= -2;
				goto error;
			}

			break;
			}

		default:
			snprintf(errbuf, PCAP_ERRBUF_SIZE, "Authentication type not recognized.");
			retcode= -2;
			goto error;
	}


	// Check if all the data has been read; if not, discard the data in excess
	if (nread != plen)
	{
		if (sock_discard(sockctrl, plen - nread, NULL, 0) )
		{
			retcode= -1;
			goto error;
		}
	}

	rpcap_createhdr(&header, RPCAP_MSG_AUTH_REPLY, 0, 0);

	// Send the ok message back
	if ( sock_send(sockctrl, (char *) &header, sizeof (struct rpcap_header), errbuf, PCAP_ERRBUF_SIZE) == -1)
	{
		retcode= -1;
		goto error;
	}

	return 0;

error:
	// Check if all the data has been read; if not, discard the data in excess
	if (nread != plen)
		sock_discard(sockctrl, plen - nread, NULL, 0);

	return retcode;
}

static int
add_addr_to_iflist(pcap_if_t **alldevs, char *name, u_int flags,
    struct sockaddr *addr, struct sockaddr *netmask,
    struct sockaddr *broadaddr, struct sockaddr *dstaddr, char *errbuf)
{
	pcap_if_t *curdev;
	pcap_addr_t *curaddr, *prevaddr, *nextaddr;

	if (add_or_find_if(&curdev, alldevs, name, flags, NULL, errbuf) == -1) {
		/*
		 * Error - give up.
		 */
		return (-1);
	}
	if (curdev == NULL) {
		/*
		 * Device wasn't added because it can't be opened.
		 * Not a fatal error.
		 */
		return (0);
	}

	/*
	 * "curdev" is an entry for this interface; add an entry for this
	 * address to its list of addresses.
	 *
	 * Allocate the new entry and fill it in.
	 */
	curaddr = malloc(sizeof(pcap_addr_t));
	if (curaddr == NULL) {
		(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
		    "malloc: %s", pcap_strerror(errno));
		return (-1);
	}

	curaddr->next = NULL;
	if (addr != NULL) {
		curaddr->addr = dup_sockaddr(addr);
		if (curaddr->addr == NULL) {
			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "malloc: %s", pcap_strerror(errno));
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->addr = NULL;

	if (netmask != NULL) {
		curaddr->netmask = dup_sockaddr(netmask);
		if (curaddr->netmask == NULL) {
			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "malloc: %s", pcap_strerror(errno));
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->netmask = NULL;
		
	if (broadaddr != NULL) {
		curaddr->broadaddr = dup_sockaddr(broadaddr);
		if (curaddr->broadaddr == NULL) {
			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "malloc: %s", pcap_strerror(errno));
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->broadaddr = NULL;
		
	if (dstaddr != NULL) {
		curaddr->dstaddr = dup_sockaddr(dstaddr);
		if (curaddr->dstaddr == NULL) {
			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "malloc: %s", pcap_strerror(errno));
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->dstaddr = NULL;
		
	/*
	 * Find the end of the list of addresses.
	 */
	for (prevaddr = curdev->addresses; prevaddr != NULL; prevaddr = nextaddr) {
		nextaddr = prevaddr->next;
		if (nextaddr == NULL) {
			/*
			 * This is the end of the list.
			 */
			break;
		}
	}

	if (prevaddr == NULL) {
		/*
		 * The list was empty; this is the first member.
		 */
		curdev->addresses = curaddr;
	} else {
		/*
//.........这里部分代码省略.........

static int
pcap_activate_dlpi(pcap_t *p)
{
#ifdef DL_HP_RAWDLS
	struct pcap_dlpi *pd = p->priv;
#endif
	int status = 0;
	int retv;
	register char *cp;
	int ppa;
#ifdef HAVE_SOLARIS
	int isatm = 0;
#endif
	register dl_info_ack_t *infop;
#ifdef HAVE_SYS_BUFMOD_H
	bpf_u_int32 ss;
#ifdef HAVE_SOLARIS
	register char *release;
	bpf_u_int32 osmajor, osminor, osmicro;
#endif
#endif
	bpf_u_int32 buf[MAXDLBUF];
	char dname[100];
#ifndef HAVE_DEV_DLPI
	char dname2[100];
#endif

#ifdef HAVE_DEV_DLPI
	/*
	** Remove any "/dev/" on the front of the device.
	*/
	cp = strrchr(p->opt.source, '/');
	if (cp == NULL)
		strlcpy(dname, p->opt.source, sizeof(dname));
	else
		strlcpy(dname, cp + 1, sizeof(dname));

	/*
	 * Split the device name into a device type name and a unit number;
	 * chop off the unit number, so "dname" is just a device type name.
	 */
	cp = split_dname(dname, &ppa, p->errbuf);
	if (cp == NULL) {
		status = PCAP_ERROR_NO_SUCH_DEVICE;
		goto bad;
	}
	*cp = '\0';

	/*
	 * Use "/dev/dlpi" as the device.
	 *
	 * XXX - HP's DLPI Programmer's Guide for HP-UX 11.00 says that
	 * the "dl_mjr_num" field is for the "major number of interface
	 * driver"; that's the major of "/dev/dlpi" on the system on
	 * which I tried this, but there may be DLPI devices that
	 * use a different driver, in which case we may need to
	 * search "/dev" for the appropriate device with that major
	 * device number, rather than hardwiring "/dev/dlpi".
	 */
	cp = "/dev/dlpi";
	if ((p->fd = open(cp, O_RDWR)) < 0) {
		if (errno == EPERM || errno == EACCES)
			status = PCAP_ERROR_PERM_DENIED;
		else
			status = PCAP_ERROR;
		snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
		    "%s: %s", cp, pcap_strerror(errno));
		goto bad;
	}

#ifdef DL_HP_RAWDLS
	/*
	 * XXX - HP-UX 10.20 and 11.xx don't appear to support sending and
	 * receiving packets on the same descriptor - you need separate
	 * descriptors for sending and receiving, bound to different SAPs.
	 *
	 * If the open fails, we just leave -1 in "pd->send_fd" and reject
	 * attempts to send packets, just as if, in pcap-bpf.c, we fail
	 * to open the BPF device for reading and writing, we just try
	 * to open it for reading only and, if that succeeds, just let
	 * the send attempts fail.
	 */
	pd->send_fd = open(cp, O_RDWR);
#endif

	/*
	 * Get a table of all PPAs for that device, and search that
	 * table for the specified device type name and unit number.
	 */
	ppa = get_dlpi_ppa(p->fd, dname, ppa, p->errbuf);
	if (ppa < 0) {
		status = ppa;
		goto bad;
	}
#else
	/*
	 * If the device name begins with "/", assume it begins with
	 * the pathname of the directory containing the device to open;
	 * otherwise, concatenate the device directory name and the
	 * device name.
//.........这里部分代码省略.........

static int
recv_ack(int fd, int size, const char *what, char *bufp, char *ebuf, int *uerror)
{
	union	DL_primitives	*dlp;
	struct	strbuf	ctl;
	int	flags;

	ctl.maxlen = MAXDLBUF;
	ctl.len = 0;
	ctl.buf = bufp;

	flags = 0;
	if (getmsg(fd, &ctl, (struct strbuf*)NULL, &flags) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "recv_ack: %s getmsg: %s",
		    what, pcap_strerror(errno));
		return (-1);
	}

	dlp = (union DL_primitives *) ctl.buf;
	switch (dlp->dl_primitive) {

	case DL_INFO_ACK:
	case DL_BIND_ACK:
	case DL_OK_ACK:
#ifdef DL_HP_PPA_ACK
	case DL_HP_PPA_ACK:
#endif
		/* These are OK */
		break;

	case DL_ERROR_ACK:
		switch (dlp->error_ack.dl_errno) {

		case DL_SYSERR:
			if (uerror != NULL)
				*uerror = dlp->error_ack.dl_unix_errno;
			snprintf(ebuf, PCAP_ERRBUF_SIZE,
			    "recv_ack: %s: UNIX error - %s",
			    what, pcap_strerror(dlp->error_ack.dl_unix_errno));
			break;

		default:
			if (uerror != NULL)
				*uerror = 0;
			snprintf(ebuf, PCAP_ERRBUF_SIZE, "recv_ack: %s: %s",
			    what, dlstrerror(dlp->error_ack.dl_errno));
			break;
		}
		return (-1);

	default:
		if (uerror != NULL)
			*uerror = 0;
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "recv_ack: %s: Unexpected primitive ack %s",
		    what, dlprim(dlp->dl_primitive));
		return (-1);
	}

	if (ctl.len < size) {
		if (uerror != NULL)
			*uerror = 0;
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "recv_ack: %s: Ack too small (%d < %d)",
		    what, ctl.len, size);
		return (-1);
	}
	return (ctl.len);
}

static int
netfilter_read_linux(pcap_t *handle, int max_packets, pcap_handler callback, u_char *user)
{
	struct pcap_netfilter *handlep = handle->priv;
	const unsigned char *buf;
	int count = 0;
	int len;

	/* ignore interrupt system call error */
	do {
		len = recv(handle->fd, handle->buffer, handle->bufsize, 0);
		if (handle->break_loop) {
			handle->break_loop = 0;
			return -2;
		}
	} while ((len == -1) && (errno == EINTR));

	if (len < 0) {
		snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "Can't receive packet %d:%s", errno, pcap_strerror(errno));
		return -1;
	}

	buf = handle->buffer;
	while (len >= NLMSG_SPACE(0)) {
		const struct nlmsghdr *nlh = (const struct nlmsghdr *) buf;
		u_int32_t msg_len;
		nftype_t type = OTHER;

		if (nlh->nlmsg_len < sizeof(struct nlmsghdr) || len < nlh->nlmsg_len) {
			snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "Message truncated: (got: %d) (nlmsg_len: %u)", len, nlh->nlmsg_len);
			return -1;
		}

		if (NFNL_SUBSYS_ID(nlh->nlmsg_type) == NFNL_SUBSYS_ULOG && 
			NFNL_MSG_TYPE(nlh->nlmsg_type) == NFULNL_MSG_PACKET) 
				type = NFLOG;

		if (NFNL_SUBSYS_ID(nlh->nlmsg_type) == NFNL_SUBSYS_QUEUE && 
			NFNL_MSG_TYPE(nlh->nlmsg_type) == NFQNL_MSG_PACKET)
				type = NFQUEUE;

		if (type != OTHER) {
			const unsigned char *payload = NULL;
			struct pcap_pkthdr pkth;

			const struct nfgenmsg *nfg;
			int id = 0;

			if (handle->linktype != DLT_NFLOG) {
				const struct nfattr *payload_attr = NULL;

				if (nlh->nlmsg_len < HDR_LENGTH) {
					snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "Malformed message: (nlmsg_len: %u)", nlh->nlmsg_len);
					return -1;
				}

				nfg = NLMSG_DATA(nlh);
				if (nlh->nlmsg_len > HDR_LENGTH) {
					struct nfattr *attr = NFM_NFA(nfg);
					int attr_len = nlh->nlmsg_len - NLMSG_ALIGN(HDR_LENGTH);

					while (NFA_OK(attr, attr_len)) {
						if (type == NFQUEUE) {
							switch (NFA_TYPE(attr)) {
								case NFQA_PACKET_HDR:
									{
										const struct nfqnl_msg_packet_hdr *pkt_hdr = (const struct nfqnl_msg_packet_hdr *) NFA_DATA(attr);

										id = ntohl(pkt_hdr->packet_id);
										break;
									}
								case NFQA_PAYLOAD:
									payload_attr = attr;
									break;
							}

						} else if (type == NFLOG) {
							switch (NFA_TYPE(attr)) {
								case NFULA_PAYLOAD:
									payload_attr = attr;
									break;
							}
						}
						attr = NFA_NEXT(attr, attr_len);
					}
				}

				if (payload_attr) {
					payload = NFA_DATA(payload_attr);
					pkth.len = pkth.caplen = NFA_PAYLOAD(payload_attr);
				}

			} else {
				payload = NLMSG_DATA(nlh);
				pkth.caplen = pkth.len = nlh->nlmsg_len-NLMSG_ALIGN(sizeof(struct nlmsghdr));
			}

			if (payload) {
				/* pkth.caplen = min (payload_len, handle->snapshot); */

//.........这里部分代码省略.........

/*
 * Determine ppa number that specifies ifname.
 *
 * If the "dl_hp_ppa_info_t" doesn't have a "dl_module_id_1" member,
 * the code that's used here is the old code for HP-UX 10.x.
 *
 * However, HP-UX 10.20, at least, appears to have such a member
 * in its "dl_hp_ppa_info_t" structure, so the new code is used.
 * The new code didn't work on an old 10.20 system on which Rick
 * Jones of HP tried it, but with later patches installed, it
 * worked - it appears that the older system had those members but
 * didn't put anything in them, so, if the search by name fails, we
 * do the old search.
 *
 * Rick suggests that making sure your system is "up on the latest
 * lancommon/DLPI/driver patches" is probably a good idea; it'd fix
 * that problem, as well as allowing libpcap to see packets sent
 * from the system on which the libpcap application is being run.
 * (On 10.20, in addition to getting the latest patches, you need
 * to turn the kernel "lanc_outbound_promisc_flag" flag on with ADB;
 * a posting to "comp.sys.hp.hpux" at
 *
 *	http://www.deja.com/[ST_rn=ps]/getdoc.xp?AN=558092266
 *
 * says that, to see the machine's outgoing traffic, you'd need to
 * apply the right patches to your system, and also set that variable
 * with:

echo 'lanc_outbound_promisc_flag/W1' | /usr/bin/adb -w /stand/vmunix /dev/kmem

 * which could be put in, for example, "/sbin/init.d/lan".
 *
 * Setting the variable is not necessary on HP-UX 11.x.
 */
static int
get_dlpi_ppa(register int fd, register const char *device, register int unit,
    register char *ebuf)
{
	register dl_hp_ppa_ack_t *ap;
	register dl_hp_ppa_info_t *ipstart, *ip;
	register int i;
	char dname[100];
	register u_long majdev;
	struct stat statbuf;
	dl_hp_ppa_req_t	req;
	char buf[MAXDLBUF];
	char *ppa_data_buf;
	dl_hp_ppa_ack_t	*dlp;
	struct strbuf ctl;
	int flags;
	int ppa;

	memset((char *)&req, 0, sizeof(req));
	req.dl_primitive = DL_HP_PPA_REQ;

	memset((char *)buf, 0, sizeof(buf));
	if (send_request(fd, (char *)&req, sizeof(req), "hpppa", ebuf) < 0)
		return (PCAP_ERROR);

	ctl.maxlen = DL_HP_PPA_ACK_SIZE;
	ctl.len = 0;
	ctl.buf = (char *)buf;

	flags = 0;
	/*
	 * DLPI may return a big chunk of data for a DL_HP_PPA_REQ. The normal
	 * recv_ack will fail because it set the maxlen to MAXDLBUF (8192)
	 * which is NOT big enough for a DL_HP_PPA_REQ.
	 *
	 * This causes libpcap applications to fail on a system with HP-APA
	 * installed.
	 *
	 * To figure out how big the returned data is, we first call getmsg
	 * to get the small head and peek at the head to get the actual data
	 * length, and  then issue another getmsg to get the actual PPA data.
	 */
	/* get the head first */
	if (getmsg(fd, &ctl, (struct strbuf *)NULL, &flags) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "get_dlpi_ppa: hpppa getmsg: %s", pcap_strerror(errno));
		return (PCAP_ERROR);
	}

	dlp = (dl_hp_ppa_ack_t *)ctl.buf;
	if (dlp->dl_primitive != DL_HP_PPA_ACK) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "get_dlpi_ppa: hpppa unexpected primitive ack 0x%x",
		    (bpf_u_int32)dlp->dl_primitive);
		return (PCAP_ERROR);
	}

	if (ctl.len < DL_HP_PPA_ACK_SIZE) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "get_dlpi_ppa: hpppa ack too small (%d < %lu)",
		     ctl.len, (unsigned long)DL_HP_PPA_ACK_SIZE);
		return (PCAP_ERROR);
	}

	/* allocate buffer */
	if ((ppa_data_buf = (char *)malloc(dlp->dl_length)) == NULL) {
//.........这里部分代码省略.........

static int
pcap_read_pf(pcap_t *pc, int cnt, pcap_handler callback, u_char *user)
{
	struct pcap_pf *pf = pc->priv;
	register u_char *p, *bp;
	register int cc, n, buflen, inc;
	register struct enstamp *sp;
#ifdef LBL_ALIGN
	struct enstamp stamp;
#endif
	register int pad;

 again:
	cc = pc->cc;
	if (cc == 0) {
		cc = read(pc->fd, (char *)pc->buffer + pc->offset, pc->bufsize);
		if (cc < 0) {
			if (errno == EWOULDBLOCK)
				return (0);
			if (errno == EINVAL &&
			    lseek(pc->fd, 0L, SEEK_CUR) + pc->bufsize < 0) {
				/*
				 * Due to a kernel bug, after 2^31 bytes,
				 * the kernel file offset overflows and
				 * read fails with EINVAL. The lseek()
				 * to 0 will fix things.
				 */
				(void)lseek(pc->fd, 0L, SEEK_SET);
				goto again;
			}
			snprintf(pc->errbuf, sizeof(pc->errbuf), "pf read: %s",
				pcap_strerror(errno));
			return (-1);
		}
		bp = (u_char *)pc->buffer + pc->offset;
	} else
		bp = pc->bp;
	/*
	 * Loop through each packet.
	 */
	n = 0;
	pad = pc->fddipad;
	while (cc > 0) {
		/*
		 * Has "pcap_breakloop()" been called?
		 * If so, return immediately - if we haven't read any
		 * packets, clear the flag and return -2 to indicate
		 * that we were told to break out of the loop, otherwise
		 * leave the flag set, so that the *next* call will break
		 * out of the loop without having read any packets, and
		 * return the number of packets we've processed so far.
		 */
		if (pc->break_loop) {
			if (n == 0) {
				pc->break_loop = 0;
				return (-2);
			} else {
				pc->cc = cc;
				pc->bp = bp;
				return (n);
			}
		}
		if (cc < sizeof(*sp)) {
			snprintf(pc->errbuf, sizeof(pc->errbuf),
			    "pf short read (%d)", cc);
			return (-1);
		}
#ifdef LBL_ALIGN
		if ((long)bp & 3) {
			sp = &stamp;
			memcpy((char *)sp, (char *)bp, sizeof(*sp));
		} else
#endif
			sp = (struct enstamp *)bp;
		if (sp->ens_stamplen != sizeof(*sp)) {
			snprintf(pc->errbuf, sizeof(pc->errbuf),
			    "pf short stamplen (%d)",
			    sp->ens_stamplen);
			return (-1);
		}

		p = bp + sp->ens_stamplen;
		buflen = sp->ens_count;
		if (buflen > pc->snapshot)
			buflen = pc->snapshot;

		/* Calculate inc before possible pad update */
		inc = ENALIGN(buflen + sp->ens_stamplen);
		cc -= inc;
		bp += inc;
		pf->TotPkts++;
		pf->TotDrops += sp->ens_dropped;
		pf->TotMissed = sp->ens_ifoverflows;
		if (pf->OrigMissed < 0)
			pf->OrigMissed = pf->TotMissed;

		/*
		 * Short-circuit evaluation: if using BPF filter
		 * in kernel, no need to do it now - we already know
		 * the packet passed the filter.
//.........这里部分代码省略.........

static int process_client_data (char *errbuf) {								/* returns: -1 = error, 0 = OK */
	int					chassis, geoslot;
	unit_t				*u;
	pcap_if_t			*iff, *prev_iff;
	pcap_addr_t			*addr, *prev_addr;
	char				*ptr;
	int					address_count;
	struct sockaddr_in	*s;
	char				*newname;
	bpf_u_int32				interfaceType;
	unsigned char		flags;

	prev_iff = 0;
	for (chassis = 0; chassis <= MAX_CHASSIS; chassis++) {
		for (geoslot = 0; geoslot <= MAX_GEOSLOT; geoslot++) {				/* now loop over all the devices */
			u = &units[chassis][geoslot];
			empty_unit_iface(u);
			ptr = u->imsg;													/* point to the start of the msg for this IOP */
			while (ptr < (u->imsg + u->len)) {
				if ((iff = malloc(sizeof(pcap_if_t))) == NULL) {
					snprintf(errbuf, PCAP_ERRBUF_SIZE, "malloc: %s", pcap_strerror(errno));
					return -1;
				}
				memset((char *)iff, 0, sizeof(pcap_if_t)); /* bzero() is deprecated, replaced with memset() */
				if (acn_if_list == 0)	acn_if_list = iff;					/* remember the head of the list */
				if (prev_iff)			prev_iff->next = iff;				/* insert a forward link */

				if (*ptr) {													/* if there is a count for the name */
					if ((iff->name = malloc(*ptr + 1)) == NULL) {			/* get that amount of space */
						snprintf(errbuf, PCAP_ERRBUF_SIZE, "malloc: %s", pcap_strerror(errno));
						return -1;
					}
					memcpy(iff->name, (ptr + 1), *ptr);						/* copy the name into the malloc'ed space */
					*(iff->name + *ptr) = 0;								/* and null terminate the string */
					ptr += *ptr;											/* now move the pointer forwards by the length of the count plus the length of the string */
				}
				ptr++;

				if (*ptr) {													/* if there is a count for the description */
					if ((iff->description = malloc(*ptr + 1)) == NULL) {	/* get that amount of space */
						snprintf(errbuf, PCAP_ERRBUF_SIZE, "malloc: %s", pcap_strerror(errno));
						return -1;
					}
					memcpy(iff->description, (ptr + 1), *ptr);				/* copy the name into the malloc'ed space */
					*(iff->description + *ptr) = 0;							/* and null terminate the string */
					ptr += *ptr;											/* now move the pointer forwards by the length of the count plus the length of the string */
				}
				ptr++;

				interfaceType = ntohl(*(bpf_u_int32 *)ptr);
				ptr += 4;													/* skip over the interface type */

				flags = *ptr++;
				if (flags) iff->flags = PCAP_IF_LOOPBACK;					/* if this is a loopback style interface, lets mark it as such */

				address_count = *ptr++;

				prev_addr = 0;
				while (address_count--) {
					if ((addr = malloc(sizeof(pcap_addr_t))) == NULL) {
						snprintf(errbuf, PCAP_ERRBUF_SIZE, "malloc: %s", pcap_strerror(errno));
						return -1;
					}
 					memset((char *)addr, 0, sizeof(pcap_addr_t)); /* bzero() is deprecated, replaced with memset() */
					if (iff->addresses == 0) iff->addresses = addr;
					if (prev_addr) prev_addr->next = addr;							/* insert a forward link */
					if (*ptr) {														/* if there is a count for the address */
						if ((s = malloc(sizeof(struct sockaddr_in))) == NULL) {		/* get that amount of space */
							snprintf(errbuf, PCAP_ERRBUF_SIZE, "malloc: %s", pcap_strerror(errno));
							return -1;
						}
						memset((char *)s, 0, sizeof(struct sockaddr_in)); /* bzero() is deprecated, replaced with memset() */
						addr->addr = (struct sockaddr *)s;
						s->sin_family		= AF_INET;
						s->sin_addr.s_addr	= *(bpf_u_int32 *)(ptr + 1);			/* copy the address in */
						ptr += *ptr;										/* now move the pointer forwards according to the specified length of the address */
					}
					ptr++;													/* then forwards one more for the 'length of the address' field */
					if (*ptr) {												/* process any netmask */
						if ((s = malloc(sizeof(struct sockaddr_in))) == NULL) {
							snprintf(errbuf, PCAP_ERRBUF_SIZE, "malloc: %s", pcap_strerror(errno));
							return -1;
						}
						/* bzero() is deprecated, replaced with memset() */
						memset((char *)s, 0, sizeof(struct sockaddr_in));

						addr->netmask = (struct sockaddr *)s;
						s->sin_family		= AF_INET;
						s->sin_addr.s_addr	= *(bpf_u_int32*)(ptr + 1);
						ptr += *ptr;
					}
					ptr++;
					if (*ptr) {												/* process any broadcast address */
						if ((s = malloc(sizeof(struct sockaddr_in))) == NULL) {
							snprintf(errbuf, PCAP_ERRBUF_SIZE, "malloc: %s", pcap_strerror(errno));
							return -1;
						}
						/* bzero() is deprecated, replaced with memset() */
						memset((char *)s, 0, sizeof(struct sockaddr_in));

//.........这里部分代码省略.........

/*
 * Add an entry to the list of addresses for an interface.
 * "curdev" is the entry for that interface.
 */
static int
add_addr_to_list(pcap_if_t *curdev, struct sockaddr *addr,
    struct sockaddr *netmask, struct sockaddr *broadaddr,
    struct sockaddr *dstaddr, char *errbuf)
{
	pcap_addr_t *curaddr, *prevaddr, *nextaddr;

	/*
	 * Allocate the new entry and fill it in.
	 */
	curaddr = (pcap_addr_t*)malloc(sizeof(pcap_addr_t));
	if (curaddr == NULL) {
		(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
		    "malloc: %s", pcap_strerror(errno));
		return (-1);
	}

	curaddr->next = NULL;
	if (addr != NULL) {
		curaddr->addr = (struct sockaddr*)dup_sockaddr(addr, sizeof(struct sockaddr_storage));
		if (curaddr->addr == NULL) {
			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "malloc: %s", pcap_strerror(errno));
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->addr = NULL;

	if (netmask != NULL) {
		curaddr->netmask = (struct sockaddr*)dup_sockaddr(netmask, sizeof(struct sockaddr_storage));
		if (curaddr->netmask == NULL) {
			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "malloc: %s", pcap_strerror(errno));
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->netmask = NULL;
		
	if (broadaddr != NULL) {
		curaddr->broadaddr = (struct sockaddr*)dup_sockaddr(broadaddr, sizeof(struct sockaddr_storage));
		if (curaddr->broadaddr == NULL) {
			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "malloc: %s", pcap_strerror(errno));
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->broadaddr = NULL;
		
	if (dstaddr != NULL) {
		curaddr->dstaddr = (struct sockaddr*)dup_sockaddr(dstaddr, sizeof(struct sockaddr_storage));
		if (curaddr->dstaddr == NULL) {
			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "malloc: %s", pcap_strerror(errno));
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->dstaddr = NULL;
		
	/*
	 * Find the end of the list of addresses.
	 */
	for (prevaddr = curdev->addresses; prevaddr != NULL; prevaddr = nextaddr) {
		nextaddr = prevaddr->next;
		if (nextaddr == NULL) {
			/*
			 * This is the end of the list.
			 */
			break;
		}
	}

	if (prevaddr == NULL) {
		/*
		 * The list was empty; this is the first member.
		 */
		curdev->addresses = curaddr;
	} else {
		/*
		 * "prevaddr" is the last member of the list; append
		 * this member to it.
		 */
		prevaddr->next = curaddr;
	}

	return (0);
}

pcap_t *
pcap_open_live(const char *device, int snaplen, int promisc, int to_ms,
    char *ebuf)
{
	register char *cp;
	register pcap_t *p;
	int ppa;
#ifdef HAVE_SOLARIS
	int isatm = 0;
#endif
	register dl_info_ack_t *infop;
#ifdef HAVE_SYS_BUFMOD_H
	bpf_u_int32 ss, chunksize;
#ifdef HAVE_SOLARIS
	register char *release;
	bpf_u_int32 osmajor, osminor, osmicro;
#endif
#endif
	bpf_u_int32 buf[MAXDLBUF];
	char dname[100];
#ifndef HAVE_DEV_DLPI
	char dname2[100];
#endif

	p = (pcap_t *)malloc(sizeof(*p));
	if (p == NULL) {
		strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
		return (NULL);
	}
	memset(p, 0, sizeof(*p));
	p->fd = -1;	/* indicate that it hasn't been opened yet */
	p->send_fd = -1;

#ifdef HAVE_DEV_DLPI
	/*
	** Remove any "/dev/" on the front of the device.
	*/
	cp = strrchr(device, '/');
	if (cp == NULL)
		strlcpy(dname, device, sizeof(dname));
	else
		strlcpy(dname, cp + 1, sizeof(dname));

	/*
	 * Split the device name into a device type name and a unit number;
	 * chop off the unit number, so "dname" is just a device type name.
	 */
	cp = split_dname(dname, &ppa, ebuf);
	if (cp == NULL)
		goto bad;
	*cp = '\0';

	/*
	 * Use "/dev/dlpi" as the device.
	 *
	 * XXX - HP's DLPI Programmer's Guide for HP-UX 11.00 says that
	 * the "dl_mjr_num" field is for the "major number of interface
	 * driver"; that's the major of "/dev/dlpi" on the system on
	 * which I tried this, but there may be DLPI devices that
	 * use a different driver, in which case we may need to
	 * search "/dev" for the appropriate device with that major
	 * device number, rather than hardwiring "/dev/dlpi".
	 */
	cp = "/dev/dlpi";
	if ((p->fd = open(cp, O_RDWR)) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "%s: %s", cp, pcap_strerror(errno));
		goto bad;
	}

#ifdef DL_HP_RAWDLS
	/*
	 * XXX - HP-UX 10.20 and 11.xx don't appear to support sending and
	 * receiving packets on the same descriptor - you need separate
	 * descriptors for sending and receiving, bound to different SAPs.
	 *
	 * If the open fails, we just leave -1 in "p->send_fd" and reject
	 * attempts to send packets, just as if, in pcap-bpf.c, we fail
	 * to open the BPF device for reading and writing, we just try
	 * to open it for reading only and, if that succeeds, just let
	 * the send attempts fail.
	 */
	p->send_fd = open(cp, O_RDWR);
#endif

	/*
	 * Get a table of all PPAs for that device, and search that
	 * table for the specified device type name and unit number.
	 */
	ppa = get_dlpi_ppa(p->fd, dname, ppa, ebuf);
	if (ppa < 0)
		goto bad;
#else
	/*
	 * If the device name begins with "/", assume it begins with
	 * the pathname of the directory containing the device to open;
	 * otherwise, concatenate the device directory name and the
	 * device name.
	 */
	if (*device == '/')
//.........这里部分代码省略.........

static int
pcap_read_dlpi(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
{
	register int cc, n, caplen, origlen;
	register u_char *bp, *ep, *pk;
	register struct bpf_insn *fcode;
#ifdef HAVE_SYS_BUFMOD_H
	register struct sb_hdr *sbp;
#ifdef LBL_ALIGN
	struct sb_hdr sbhdr;
#endif
#endif
	int flags;
	struct strbuf data;
	struct pcap_pkthdr pkthdr;

	flags = 0;
	cc = p->cc;
	if (cc == 0) {
		data.buf = (char *)p->buffer + p->offset;
		data.maxlen = p->bufsize;
		data.len = 0;
		do {
			/*
			 * Has "pcap_breakloop()" been called?
			 */
			if (p->break_loop) {
				/*
				 * Yes - clear the flag that indicates
				 * that it has, and return -2 to
				 * indicate that we were told to
				 * break out of the loop.
				 */
				p->break_loop = 0;
				return (-2);
			}
			/*
			 * XXX - check for the DLPI primitive, which
			 * would be DL_HP_RAWDATA_IND on HP-UX
			 * if we're in raw mode?
			 */
			if (getmsg(p->fd, &ctl, &data, &flags) < 0) {
				/* Don't choke when we get ptraced */
				switch (errno) {

				case EINTR:
					cc = 0;
					continue;

				case EAGAIN:
					return (0);
				}
				strlcpy(p->errbuf, pcap_strerror(errno),
				    sizeof(p->errbuf));
				return (-1);
			}
			cc = data.len;
		} while (cc == 0);
		bp = p->buffer + p->offset;
	} else
		bp = p->bp;

	/* Loop through packets */
	fcode = p->fcode.bf_insns;
	ep = bp + cc;
	n = 0;
#ifdef HAVE_SYS_BUFMOD_H
	while (bp < ep) {
		/*
		 * Has "pcap_breakloop()" been called?
		 * If so, return immediately - if we haven't read any
		 * packets, clear the flag and return -2 to indicate
		 * that we were told to break out of the loop, otherwise
		 * leave the flag set, so that the *next* call will break
		 * out of the loop without having read any packets, and
		 * return the number of packets we've processed so far.
		 */
		if (p->break_loop) {
			if (n == 0) {
				p->break_loop = 0;
				return (-2);
			} else {
				p->bp = bp;
				p->cc = ep - bp;
				return (n);
			}
		}
#ifdef LBL_ALIGN
		if ((long)bp & 3) {
			sbp = &sbhdr;
			memcpy(sbp, bp, sizeof(*sbp));
		} else
#endif
			sbp = (struct sb_hdr *)bp;
		p->md.stat.ps_drop = sbp->sbh_drops;
		pk = bp + sizeof(*sbp);
		bp += sbp->sbh_totlen;
		origlen = sbp->sbh_origlen;
		caplen = sbp->sbh_msglen;
#else
//.........这里部分代码省略.........

/*
 * Get from "/proc/net/dev" all interfaces listed there; if they're
 * already in the list of interfaces we have, that won't add another
 * instance, but if they're not, that'll add them.
 *
 * We don't bother getting any addresses for them; it appears you can't
 * use SIOCGIFADDR on Linux to get IPv6 addresses for interfaces, and,
 * although some other types of addresses can be fetched with SIOCGIFADDR,
 * we don't bother with them for now.
 *
 * We also don't fail if we couldn't open "/proc/net/dev"; we just leave
 * the list of interfaces as is.
 */
static int
scan_proc_net_dev(pcap_if_t **devlistp, int fd, char *errbuf)
{
	FILE *proc_net_f;
	char linebuf[512];
	int linenum;
	unsigned char *p;
	char name[512];	/* XXX - pick a size */
	char *q, *saveq;
	struct ifreq ifrflags;
	int ret = 0;

	proc_net_f = fopen("/proc/net/dev", "r");
	if (proc_net_f == NULL)
		return (0);

	for (linenum = 1;
	    fgets(linebuf, sizeof linebuf, proc_net_f) != NULL; linenum++) {
		/*
		 * Skip the first two lines - they're headers.
		 */
		if (linenum <= 2)
			continue;

		p = &linebuf[0];

		/*
		 * Skip leading white space.
		 */
		while (*p != '\0' && isspace(*p))
			p++;
		if (*p == '\0' || *p == '\n')
			continue;	/* blank line */

		/*
		 * Get the interface name.
		 */
		q = &name[0];
		while (*p != '\0' && !isspace(*p)) {
			if (*p == ':') {
				/*
				 * This could be the separator between a
				 * name and an alias number, or it could be
				 * the separator between a name with no 
				 * alias number and the next field.
				 *
				 * If there's a colon after digits, it
				 * separates the name and the alias number,
				 * otherwise it separates the name and the
				 * next field.
				 */
				saveq = q;
				while (isdigit(*p))
					*q++ = *p++;
				if (*p != ':') {
					/*
					 * That was the next field,
					 * not the alias number.
					 */
					q = saveq;
				}
				break;
			} else
				*q++ = *p++;
		}
		*q = '\0';

		/*
		 * Get the flags for this interface, and skip it if
		 * it's not up.
		 */
		strncpy(ifrflags.ifr_name, name, sizeof(ifrflags.ifr_name));
		if (ioctl(fd, SIOCGIFFLAGS, (char *)&ifrflags) < 0) {
			if (errno == ENXIO)
				continue;
			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "SIOCGIFFLAGS: %.*s: %s",
			    (int)sizeof(ifrflags.ifr_name),
			    ifrflags.ifr_name,
			    pcap_strerror(errno));
			ret = -1;
			break;
		}
		if (!(ifrflags.ifr_flags & IFF_UP))
			continue;

		/*
//.........这里部分代码省略.........