本文整理汇总了C++中pa_context_errno函数的典型用法代码示例。如果您正苦于以下问题:C++ pa_context_errno函数的具体用法?C++ pa_context_errno怎么用?C++ pa_context_errno使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了pa_context_errno函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: xmms_pulse_backend_write
gboolean xmms_pulse_backend_write (xmms_pulse *p, const char *data,
size_t length, int *rerror)
{
assert (p);
if (!data || !length) {
if (rerror)
*rerror = PA_ERR_INVALID;
return FALSE;
}
pa_threaded_mainloop_lock (p->mainloop);
if (!check_pulse_health (p, rerror))
goto unlock_and_fail;
while (length > 0) {
size_t buf_len;
int ret;
while (!(buf_len = pa_stream_writable_size (p->stream))) {
pa_threaded_mainloop_wait (p->mainloop);
if (!check_pulse_health (p, rerror))
goto unlock_and_fail;
}
if (buf_len == (size_t)-1) {
if (rerror)
*rerror = pa_context_errno ((p)->context);
goto unlock_and_fail;
}
if (buf_len > length)
buf_len = length;
ret = pa_stream_write (p->stream, data, buf_len, NULL, 0, PA_SEEK_RELATIVE);
if (ret < 0) {
if (rerror)
*rerror = pa_context_errno ((p)->context);
goto unlock_and_fail;
}
data += buf_len;
length -= buf_len;
}
pa_threaded_mainloop_unlock (p->mainloop);
return TRUE;
unlock_and_fail:
pa_threaded_mainloop_unlock (p->mainloop);
return FALSE;
}
示例2: gst_pulsesrc_reset
static void
gst_pulsesrc_reset (GstAudioSrc * asrc)
{
GstPulseSrc *pulsesrc = GST_PULSESRC_CAST (asrc);
pa_operation *o = NULL;
pa_threaded_mainloop_lock (pulsesrc->mainloop);
GST_DEBUG_OBJECT (pulsesrc, "reset");
if (gst_pulsesrc_is_dead (pulsesrc, TRUE))
goto unlock_and_fail;
if (!(o =
pa_stream_flush (pulsesrc->stream, gst_pulsesrc_success_cb,
pulsesrc))) {
GST_ELEMENT_ERROR (pulsesrc, RESOURCE, FAILED,
("pa_stream_flush() failed: %s",
pa_strerror (pa_context_errno (pulsesrc->context))), (NULL));
goto unlock_and_fail;
}
pulsesrc->paused = TRUE;
/* Inform anyone waiting in _write() call that it shall wakeup */
if (pulsesrc->in_read) {
pa_threaded_mainloop_signal (pulsesrc->mainloop, 0);
}
pulsesrc->operation_success = FALSE;
while (pa_operation_get_state (o) == PA_OPERATION_RUNNING) {
if (gst_pulsesrc_is_dead (pulsesrc, TRUE))
goto unlock_and_fail;
pa_threaded_mainloop_wait (pulsesrc->mainloop);
}
if (!pulsesrc->operation_success) {
GST_ELEMENT_ERROR (pulsesrc, RESOURCE, FAILED, ("Flush failed: %s",
pa_strerror (pa_context_errno (pulsesrc->context))), (NULL));
goto unlock_and_fail;
}
unlock_and_fail:
if (o) {
pa_operation_cancel (o);
pa_operation_unref (o);
}
pa_threaded_mainloop_unlock (pulsesrc->mainloop);
}
示例3: rdpsnd_pulse_connect
static int
rdpsnd_pulse_connect(rdpsndDevicePlugin * devplugin)
{
struct pulse_device_data * pulse_data;
pa_context_state_t state;
pulse_data = (struct pulse_device_data *) devplugin->device_data;
if (!pulse_data->context)
return 1;
if (pa_context_connect(pulse_data->context, NULL, 0, NULL))
{
LLOGLN(0, ("rdpsnd_pulse_connect: pa_context_connect failed (%d)",
pa_context_errno(pulse_data->context)));
return 1;
}
pa_threaded_mainloop_lock(pulse_data->mainloop);
if (pa_threaded_mainloop_start(pulse_data->mainloop) < 0)
{
pa_threaded_mainloop_unlock(pulse_data->mainloop);
LLOGLN(0, ("rdpsnd_pulse_connect: pa_threaded_mainloop_start failed (%d)",
pa_context_errno(pulse_data->context)));
return 1;
}
for (;;)
{
state = pa_context_get_state(pulse_data->context);
if (state == PA_CONTEXT_READY)
break;
if (!PA_CONTEXT_IS_GOOD(state))
{
LLOGLN(0, ("rdpsnd_pulse_connect: bad context state (%d)",
pa_context_errno(pulse_data->context)));
break;
}
pa_threaded_mainloop_wait(pulse_data->mainloop);
}
pa_threaded_mainloop_unlock(pulse_data->mainloop);
if (state == PA_CONTEXT_READY)
{
LLOGLN(0, ("rdpsnd_pulse_connect: connected"));
return 0;
}
else
{
pa_context_disconnect(pulse_data->context);
return 1;
}
}
示例4: pa_stream_new
static pa_stream *connect_playback_stream(ALCdevice *device,
pa_stream_flags_t flags, pa_buffer_attr *attr, pa_sample_spec *spec,
pa_channel_map *chanmap)
{
pulse_data *data = device->ExtraData;
pa_stream_state_t state;
pa_stream *stream;
stream = pa_stream_new(data->context, "Playback Stream", spec, chanmap);
if(!stream)
{
ERR("pa_stream_new() failed: %s\n",
pa_strerror(pa_context_errno(data->context)));
return NULL;
}
pa_stream_set_state_callback(stream, stream_state_callback, data->loop);
AL_PRINT("Attempting flags 0x%x\n", flags);
if (attr)
{
AL_PRINT("maxlength: %d tlegth: %d prebuf: %d minreq: %d fragsize: %d\n",
attr->maxlength, attr->tlength, attr->prebuf, attr->minreq, attr->fragsize);
}
if(pa_stream_connect_playback(stream, data->device_name, attr, flags, NULL, NULL) < 0)
{
ERR("Stream did not connect: %s\n",
pa_strerror(pa_context_errno(data->context)));
pa_stream_unref(stream);
return NULL;
}
while((state=pa_stream_get_state(stream)) != PA_STREAM_READY)
{
if(!PA_STREAM_IS_GOOD(state))
{
ERR("Stream did not get ready: %s\n",
pa_strerror(pa_context_errno(data->context)));
pa_stream_unref(stream);
return NULL;
}
pa_threaded_mainloop_wait(data->loop);
}
pa_stream_set_state_callback(stream, NULL, NULL);
return stream;
}
示例5: pa_mainloop_new
bool PulseAudio::init(bool)
{
pa_ml = pa_mainloop_new();
pa_mainloop_api* pa_mlapi = pa_mainloop_get_api(pa_ml);
pa_context* pa_ctx = pa_context_new(pa_mlapi, "MuseScore");
if (pa_context_connect(pa_ctx, NULL, pa_context_flags_t(0), NULL) != 0) {
qDebug("PulseAudio Context Connect Failed with Error: %s", pa_strerror(pa_context_errno(pa_ctx)));
return false;
}
int pa_ready = 0;
pa_context_set_state_callback(pa_ctx, pa_state_cb, &pa_ready);
while (pa_ready == 0)
pa_mainloop_iterate(pa_ml, 1, NULL);
if (pa_ready == 2)
return false;
ss.rate = _sampleRate;
ss.channels = 2;
ss.format = PA_SAMPLE_FLOAT32LE;
pa_stream* playstream = pa_stream_new(pa_ctx, "Playback", &ss, NULL);
if (!playstream) {
qDebug("pa_stream_new failed: %s", pa_strerror(pa_context_errno(pa_ctx)));
return false;
}
pa_stream_set_write_callback(playstream, paCallback, this);
bufattr.fragsize = (uint32_t)-1;
bufattr.maxlength = FRAMES * 2 * sizeof(float);
bufattr.minreq = FRAMES * 1 * sizeof(float); // pa_usec_to_bytes(0, &ss);
bufattr.prebuf = (uint32_t)-1;
bufattr.tlength = bufattr.maxlength;
int r = pa_stream_connect_playback(playstream, nullptr, &bufattr,
PA_STREAM_NOFLAGS, nullptr, nullptr);
if (r < 0) {
qDebug("pa_stream_connect_playback failed");
pa_context_disconnect(pa_ctx);
pa_context_unref(pa_ctx);
pa_mainloop_free(pa_ml);
pa_ml = 0;
return false;
}
return true;
}
示例6: gst_pulsemixer_ctrl_timeout_event
static void
gst_pulsemixer_ctrl_timeout_event (pa_mainloop_api * a, pa_time_event * e,
const struct timeval *tv, void *userdata)
{
pa_operation *o;
GstPulseMixerCtrl *c = GST_PULSEMIXER_CTRL (userdata);
if (c->update_volume) {
if (c->type == GST_PULSEMIXER_SINK)
o = pa_context_set_sink_volume_by_index (c->context, c->index, &c->volume,
NULL, NULL);
else
o = pa_context_set_source_volume_by_index (c->context, c->index,
&c->volume, NULL, NULL);
if (!o)
GST_WARNING_OBJECT (c->object, "Failed to set device volume: %s",
pa_strerror (pa_context_errno (c->context)));
else
pa_operation_unref (o);
c->update_volume = FALSE;
}
if (c->update_mute) {
if (c->type == GST_PULSEMIXER_SINK)
o = pa_context_set_sink_mute_by_index (c->context, c->index, !!c->muted,
NULL, NULL);
else
o = pa_context_set_source_mute_by_index (c->context, c->index, !!c->muted,
NULL, NULL);
if (!o)
GST_WARNING_OBJECT (c->object, "Failed to set device mute: %s",
pa_strerror (pa_context_errno (c->context)));
else
pa_operation_unref (o);
c->update_mute = FALSE;
}
/* Make sure that all outstanding queries are being ignored */
c->ignore_queries = c->outstandig_queries;
g_assert (e == c->time_event);
a->time_free (e);
c->time_event = NULL;
}
示例7: pulse_output_set_volume
bool
pulse_output_set_volume(struct pulse_output *po,
const struct pa_cvolume *volume, GError **error_r)
{
pa_operation *o;
if (po->context == NULL || po->stream == NULL ||
pa_stream_get_state(po->stream) != PA_STREAM_READY) {
g_set_error(error_r, pulse_output_quark(), 0, "disconnected");
return false;
}
o = pa_context_set_sink_input_volume(po->context,
pa_stream_get_index(po->stream),
volume, NULL, NULL);
if (o == NULL) {
g_set_error(error_r, pulse_output_quark(), 0,
"failed to set PulseAudio volume: %s",
pa_strerror(pa_context_errno(po->context)));
return false;
}
pa_operation_unref(o);
return true;
}
示例8: pa_threaded_mainloop_lock
void PulseAudioPlayer::Stop()
{
if (!is_playing) return;
//printf("Stopping PulseAudio\n");
is_playing = false;
start_frame = 0;
cur_frame = 0;
end_frame = 0;
// Flush the stream of data
//printf("Flushing stream\n");
pa_threaded_mainloop_lock(mainloop);
pa_operation *op = pa_stream_flush(stream, (pa_stream_success_cb_t)pa_stream_success, this);
pa_threaded_mainloop_unlock(mainloop);
stream_success.Wait();
pa_operation_unref(op);
if (!stream_success_val) {
paerror = pa_context_errno(context);
printf("PulseAudio player: Error flushing stream: %s (%d)\n", pa_strerror(paerror), paerror);
}
// And unref it
//printf("Stopped stream\n\n");
}
示例9: pulse_available_samples
static ALCuint pulse_available_samples(ALCdevice *device) //{{{
{
pulse_data *data = device->ExtraData;
size_t samples;
pa_threaded_mainloop_lock(data->loop);
/* Capture is done in fragment-sized chunks, so we loop until we get all
* that's available */
samples = (device->Connected ? pa_stream_readable_size(data->stream) : 0);
while(samples > 0)
{
const void *buf;
size_t length;
if(pa_stream_peek(data->stream, &buf, &length) < 0)
{
ERR("pa_stream_peek() failed: %s\n",
pa_strerror(pa_context_errno(data->context)));
break;
}
WriteRingBuffer(data->ring, buf, length/data->frame_size);
samples -= length;
pa_stream_drop(data->stream);
}
pa_threaded_mainloop_unlock(data->loop);
return RingBufferSize(data->ring);
} //}}}
示例10: inputStreamStateCallback
static void inputStreamStateCallback(pa_stream *stream, void *userdata)
{
Q_UNUSED(userdata);
pa_stream_state_t state = pa_stream_get_state(stream);
#ifdef DEBUG_PULSE
qDebug() << "Stream state: " << QPulseAudioInternal::stateToQString(state);
#endif
switch (state) {
case PA_STREAM_CREATING:
break;
case PA_STREAM_READY: {
#ifdef DEBUG_PULSE
QPulseAudioInput *audioInput = static_cast<QPulseAudioInput*>(userdata);
const pa_buffer_attr *buffer_attr = pa_stream_get_buffer_attr(stream);
qDebug() << "*** maxlength: " << buffer_attr->maxlength;
qDebug() << "*** prebuf: " << buffer_attr->prebuf;
qDebug() << "*** fragsize: " << buffer_attr->fragsize;
qDebug() << "*** minreq: " << buffer_attr->minreq;
qDebug() << "*** tlength: " << buffer_attr->tlength;
pa_sample_spec spec = QPulseAudioInternal::audioFormatToSampleSpec(audioInput->format());
qDebug() << "*** bytes_to_usec: " << pa_bytes_to_usec(buffer_attr->fragsize, &spec);
#endif
}
break;
case PA_STREAM_TERMINATED:
break;
case PA_STREAM_FAILED:
default:
qWarning() << QString("Stream error: %1").arg(pa_strerror(pa_context_errno(pa_stream_get_context(stream))));
QPulseAudioEngine *pulseEngine = QPulseAudioEngine::instance();
pa_threaded_mainloop_signal(pulseEngine->mainloop(), 0);
break;
}
}
示例11: do_stream_write
/* Write some data to the stream */
static void do_stream_write(size_t length) {
size_t l;
pa_assert(length);
if (!buffer || !buffer_length)
return;
l = length;
if (l > buffer_length)
l = buffer_length;
if (pa_stream_write(stream, (uint8_t*) buffer + buffer_index, l, NULL, 0, PA_SEEK_RELATIVE) < 0) {
pa_log(_("pa_stream_write() failed: %s"), pa_strerror(pa_context_errno(context)));
quit(1);
return;
}
buffer_length -= l;
buffer_index += l;
if (!buffer_length) {
pa_xfree(buffer);
buffer = NULL;
buffer_index = buffer_length = 0;
}
}
示例12: assert
/* This routine is called whenever the stream state changes */
void QPulseAudioThread::stream_state_callback ( pa_stream *s, void *userdata )
{
assert ( s );
QPulseAudioThread * thread = (QPulseAudioThread *)userdata;
switch ( pa_stream_get_state ( s ) ) {
case PA_STREAM_UNCONNECTED:
qDebug() << "UNCONNECTED";
break;
case PA_STREAM_CREATING:
qDebug() << "CREATED";
break;
case PA_STREAM_TERMINATED:
qDebug() << "TERMINATED";
break;
case PA_STREAM_READY:
qDebug() << "READY";
if ( verbose ) {
const pa_buffer_attr *a;
fprintf ( stderr, "Stream successfully created.\n" );
if ( ! ( a = pa_stream_get_buffer_attr ( s ) ) )
fprintf ( stderr, "pa_stream_get_buffer_attr() failed: %s\n", pa_strerror ( pa_context_errno ( pa_stream_get_context ( s ) ) ) );
else {
fprintf(stderr, "Buffer metrics: maxlength=%u, fragsize=%u\n", a->maxlength, a->fragsize);
}
}
break;
case PA_STREAM_FAILED:
qDebug() << "FAILED";
default:
fprintf ( stderr, "Stream error: %s\n", pa_strerror ( pa_context_errno ( pa_stream_get_context ( s ) ) ) );
pulseQuit ( 1 );
}
}
示例13: pulse_output_wait_stream
/**
* Check if the stream is (already) connected, and waits if not. The
* mainloop must be locked before calling this function.
*
* @return true on success, false on error
*/
static bool
pulse_output_wait_stream(struct pulse_output *po, GError **error_r)
{
pa_stream_state_t state = pa_stream_get_state(po->stream);
switch (state) {
case PA_STREAM_READY:
return true;
case PA_STREAM_FAILED:
case PA_STREAM_TERMINATED:
case PA_STREAM_UNCONNECTED:
g_set_error(error_r, pulse_output_quark(), 0,
"disconnected");
return false;
case PA_STREAM_CREATING:
break;
}
do {
state = pulse_output_check_stream(po);
} while (state == PA_STREAM_CREATING);
if (state != PA_STREAM_READY) {
g_set_error(error_r, pulse_output_quark(), 0,
"failed to connect the stream: %s",
pa_strerror(pa_context_errno(po->context)));
return false;
}
return true;
}
示例14: xvd_connect_to_pulse
/**
* This function does the context initialization.
*/
static gboolean
xvd_connect_to_pulse (XvdInstance *i)
{
pa_context_flags_t flags = PA_CONTEXT_NOFAIL;
if (i->pulse_context)
{
pa_context_unref (i->pulse_context);
i->pulse_context = NULL;
}
i->pulse_context = pa_context_new (pa_glib_mainloop_get_api (i->pa_main_loop),
XVD_APPNAME);
g_assert(i->pulse_context);
pa_context_set_state_callback (i->pulse_context,
xvd_context_state_callback,
i);
if (pa_context_connect (i->pulse_context,
NULL,
flags,
NULL) < 0)
{
g_warning ("xvd_connect_to_pulse: failed to connect context: %s",
pa_strerror (pa_context_errno (i->pulse_context)));
return FALSE;
}
return TRUE;
}
示例15: pulse_write
static void pulse_write(void* ptr, int length) {
int writeoffs, remain, writable;
CHECK_CONNECTED();
pa_threaded_mainloop_lock(mainloop);
CHECK_DEAD_GOTO(fail, 1);
/* break large fragments into smaller fragments. --nenolod */
for (writeoffs = 0, remain = length;
writeoffs < length;
writeoffs += writable, remain -= writable)
{
void * pptr = (char *) ptr + writeoffs;
writable = length - writeoffs;
size_t fragsize = pa_stream_writable_size(stream);
/* don't write more than what PA is willing to handle right now. */
if (writable > fragsize)
writable = fragsize;
if (pa_stream_write(stream, pptr, writable, NULL, PA_SEEK_RELATIVE, 0) < 0) {
AUDDBG("pa_stream_write() failed: %s", pa_strerror(pa_context_errno(context)));
goto fail;
}
}
do_trigger = 0;
written += length;
fail:
pa_threaded_mainloop_unlock(mainloop);
}