当前位置: 首页>>代码示例>>C++>>正文

C++ orion5x_setup_dev_boot_win函数代码示例

本文整理汇总了C++中orion5x_setup_dev_boot_win函数的典型用法代码示例。如果您正苦于以下问题：C++ orion5x_setup_dev_boot_win函数的具体用法？C++ orion5x_setup_dev_boot_win怎么用？C++ orion5x_setup_dev_boot_win使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了orion5x_setup_dev_boot_win函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: kurobox_pro_init

static void __init kurobox_pro_init(void)
{
	orion5x_init();

	orion5x_mpp_conf(kurobox_pro_mpp_modes);

	orion5x_ehci0_init();
	orion5x_ehci1_init();
	orion5x_eth_init(&kurobox_pro_eth_data);
	orion5x_i2c_init();
	orion5x_sata_init(&kurobox_pro_sata_data);
	orion5x_uart0_init();
	orion5x_uart1_init();
	orion5x_xor_init();

	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
				   KUROBOX_PRO_NOR_BOOT_SIZE);
	platform_device_register(&kurobox_pro_nor_flash);

	if (machine_is_kurobox_pro()) {
		orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE,
				       KUROBOX_PRO_NAND_SIZE);
		platform_device_register(&kurobox_pro_nand_flash);
	}

	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);

	
	pm_power_off = kurobox_pro_power_off;
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:30，代码来源:kurobox_pro-setup.c

示例2: db88f5281_init

static void __init db88f5281_init(void)
{
	orion5x_init();

	orion5x_mpp_conf(db88f5281_mpp_modes);
	writel(0, MPP_DEV_CTRL);		

	orion5x_ehci0_init();
	orion5x_eth_init(&db88f5281_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();
	orion5x_uart1_init();

	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
				DB88F5281_NOR_BOOT_SIZE);
	platform_device_register(&db88f5281_boot_flash);

	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);

	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
	platform_device_register(&db88f5281_nor_flash);

	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
	platform_device_register(&db88f5281_nand_flash);

	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:27，代码来源:db88f5281-setup.c

示例3: rd88f5181l_ge_init

static void __init rd88f5181l_ge_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&rd88f5181l_ge_eth_data);
	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
				gpio_to_irq(8));
	orion5x_i2c_init();
	orion5x_uart0_init();

	orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
				   RD88F5181L_GE_NOR_BOOT_SIZE);
	platform_device_register(&rd88f5181l_ge_nor_boot_flash);

	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
}
开发者ID:CSCLOG，项目名称:beaglebone，代码行数:25，代码来源:rd88f5181l-ge-setup.c

示例4: d2net_init

static void __init d2net_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(d2net_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&d2net_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();

	d2net_sata_power_init();
	orion5x_sata_init(&d2net_sata_data);

	orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
				D2NET_NOR_BOOT_SIZE);
	platform_device_register(&d2net_nor_flash);

	platform_device_register(&d2net_gpio_buttons);

	d2net_gpio_leds_init();

	pr_notice("d2net: Flash write are not yet supported.\n");

	i2c_register_board_info(0, d2net_i2c_devices,
				ARRAY_SIZE(d2net_i2c_devices));

	orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
}
开发者ID:Lord-Devices，项目名称:cm_kernel_samsung_hlte，代码行数:35，代码来源:d2net-setup.c

示例5: db88f5281_init

static void __init db88f5281_init(void)
{
	/*
	 * Basic Orion setup. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(db88f5281_mpp_modes);
	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&db88f5281_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();
	orion5x_uart1_init();

	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
				DB88F5281_NOR_BOOT_SIZE);
	platform_device_register(&db88f5281_boot_flash);

	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);

	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
	platform_device_register(&db88f5281_nor_flash);

	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
	platform_device_register(&db88f5281_nand_flash);

	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
}
开发者ID:5victor，项目名称:linux，代码行数:33，代码来源:db88f5281-setup.c

示例6: dns323_init

static void __init dns323_init(void)
{
	/* Setup basic Orion functions. Need to be called early. */
	orion5x_init();

	orion5x_mpp_conf(dns323_mpp_modes);
	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&dns323_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();

	/* setup flash mapping
	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
	 */
	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
	platform_device_register(&dns323_nor_flash);

	platform_device_register(&dns323_gpio_leds);

	platform_device_register(&dns323_button_device);

	i2c_register_board_info(0, dns323_i2c_devices,
				ARRAY_SIZE(dns323_i2c_devices));

	/* register dns323 specific power-off method */
	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
		pr_err("DNS323: failed to setup power-off GPIO\n");
	pm_power_off = dns323_power_off;
}
开发者ID:E-LLP，项目名称:n900，代码行数:35，代码来源:dns323-setup.c

示例7: dt2_init

static void __init dt2_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(dt2_mpp_modes);

	/*
	 * Configure peripherals.
	 */

	orion5x_uart0_init();
	orion5x_ehci0_init();
	orion5x_ehci1_init();
	orion5x_i2c_init();
	orion5x_sata_init(&dt2_sata_data);
	orion5x_xor_init();

	printk(KERN_INFO "U-Boot parameters:\n");
	printk(KERN_INFO "Sys Clk = %d, Tclk = %d, BoardID = 0x%02x\n", mvSysclk, mvTclk, gBoardId);

	printk(KERN_INFO "Serial: %s\n", dt2_eeprom.fc.dt2_serial_number);
	printk(KERN_INFO "Revision: %016x\n", dt2_eeprom.fc.dt2_revision);
	printk(KERN_INFO "DT2: Using MAC address %pM for port 0\n",
	       dt2_eeprom.gw.mac_addr[0]);
	printk(KERN_INFO "DT2: Using MAC address %pM for port 1\n",
	       dt2_eeprom.gw.mac_addr[1]);

	orion5x_eth_init(&dt2_eth_data);
	memcpy(dt2_eth_data.mac_addr, dt2_eeprom.gw.mac_addr[0], 6);
	orion5x_eth_switch_init(&dt2_switch_plat_data, NO_IRQ);

	i2c_register_board_info(0, &dt2_i2c_rtc, 1);

	orion5x_setup_dev_boot_win(DT2_NOR_BOOT_BASE, DT2_NOR_BOOT_SIZE);
	platform_device_register(&dt2_nor_flash);

	orion5x_setup_dev0_win(DT2_LEDS_BASE, DT2_LEDS_SIZE);
	platform_device_register(&dt2_leds);

	if (request_irq(gpio_to_irq(DT2_PIN_GPIO_RESET), &dt2_reset_handler,
			IRQF_DISABLED | IRQF_TRIGGER_LOW,
			"DT2: Reset button", NULL) < 0) {

		printk("DT2: Reset Button IRQ %d not available\n",
			gpio_to_irq(DT2_PIN_GPIO_RESET));
	}

	if (request_irq(gpio_to_irq(DT2_PIN_GPIO_POWER), &dt2_power_handler,
			IRQF_DISABLED | IRQF_TRIGGER_LOW,
			"DT2: Power button", NULL) < 0) {

		printk(KERN_DEBUG "DT2: Power Button IRQ %d not available\n",
			gpio_to_irq(DT2_PIN_GPIO_POWER));
	}
}
开发者ID:Cribstone，项目名称:linino，代码行数:58，代码来源:dt2-setup.c

示例8: qnap_ts209_init

static void __init qnap_ts209_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(ts209_mpp_modes);

	/*
	 * MPP[20] PCI clock 0
	 * MPP[21] PCI clock 1
	 * MPP[22] USB 0 over current
	 * MPP[23-25] Reserved
	 */

	/*
	 * Configure peripherals.
	 */
	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
				   QNAP_TS209_NOR_BOOT_SIZE);
	platform_device_register(&qnap_ts209_nor_flash);

	orion5x_ehci0_init();
	orion5x_ehci1_init();
	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
				 qnap_ts209_partitions[5].offset,
				 qnap_ts209_partitions[5].size);
	orion5x_eth_init(&qnap_tsx09_eth_data);
	orion5x_i2c_init();
	orion5x_sata_init(&qnap_ts209_sata_data);
	orion5x_uart0_init();
	orion5x_uart1_init();
	orion5x_xor_init();

	platform_device_register(&qnap_ts209_button_device);

	/* Get RTC IRQ and register the chip */
	if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
		if (gpio_direction_input(TS209_RTC_GPIO) == 0)
			qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO);
		else
			gpio_free(TS209_RTC_GPIO);
	}
	if (qnap_ts209_i2c_rtc.irq == 0)
		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);

	/* register tsx09 specific power-off method */
	pm_power_off = qnap_tsx09_power_off;
}
开发者ID:KrisShannon，项目名称:linux-2.6，代码行数:51，代码来源:ts209-setup.c

示例9: rd88f5181l_fxo_init

static void __init rd88f5181l_fxo_init(void)
{
	orion5x_init();

	orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);

	orion5x_ehci0_init();
	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
	orion5x_uart0_init();

	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
				   RD88F5181L_FXO_NOR_BOOT_SIZE);
	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:15，代码来源:rd88f5181l-fxo-setup.c

示例10: rd88f5181l_ge_init

static void __init rd88f5181l_ge_init(void)
{
	orion5x_init();

	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);

	orion5x_ehci0_init();
	orion5x_eth_init(&rd88f5181l_ge_eth_data);
	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
				gpio_to_irq(8));
	orion5x_i2c_init();
	orion5x_uart0_init();

	orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
				   RD88F5181L_GE_NOR_BOOT_SIZE);
	platform_device_register(&rd88f5181l_ge_nor_boot_flash);

	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:19，代码来源:rd88f5181l-ge-setup.c

示例11: net2big_init

static void __init net2big_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(net2big_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_ehci1_init();
	orion5x_eth_init(&net2big_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();
	orion5x_xor_init();

	net2big_sata_power_init();
	orion5x_sata_init(&net2big_sata_data);

	orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
				   NET2BIG_NOR_BOOT_SIZE);
	platform_device_register(&net2big_nor_flash);

	platform_device_register(&net2big_gpio_buttons);
	net2big_gpio_leds_init();

	i2c_register_board_info(0, net2big_i2c_devices,
				ARRAY_SIZE(net2big_i2c_devices));

	orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);

	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
		pm_power_off = net2big_power_off;
	else
		pr_err("net2big: failed to configure power-off GPIO\n");

	pr_notice("net2big: Flash writing is not yet supported.\n");
}
开发者ID:vic3t3chn0，项目名称:kernel_ubuntu_togari，代码行数:42，代码来源:net2big-setup.c

示例12: wrt350n_v2_init

static void __init wrt350n_v2_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(wrt350n_v2_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&wrt350n_v2_eth_data);
	orion5x_uart0_init();

	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
				   WRT350N_V2_NOR_BOOT_SIZE);
	platform_device_register(&wrt350n_v2_nor_flash);
}
开发者ID:hugh-smtl，项目名称:linux-2.6，代码行数:20，代码来源:wrt350n-v2-setup.c

示例13: rd88f5181l_fxo_init

static void __init rd88f5181l_fxo_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
	orion5x_uart0_init();

	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
				   RD88F5181L_FXO_NOR_BOOT_SIZE);
	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
}
开发者ID:8497165，项目名称:JetKernel，代码行数:20，代码来源:rd88f5181l-fxo-setup.c

示例14: wnr854t_init

static void __init wnr854t_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(wnr854t_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_eth_init(&wnr854t_eth_data);
	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
	orion5x_uart0_init();

	orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
				   WNR854T_NOR_BOOT_SIZE);
	platform_device_register(&wnr854t_nor_flash);
}
开发者ID:8563，项目名称:millennium-sources，代码行数:20，代码来源:wnr854t-setup.c

示例15: db88f5281_init

static void __init db88f5281_init(void)
{
	/*
	 * Basic Orion setup. Need to be called early.
	 */
	orion5x_init();

	/*
	 * Setup the CPU address decode windows for our on-board devices
	 */
	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
				DB88F5281_NOR_BOOT_SIZE);
	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);

	/*
	 * Setup Multiplexing Pins:
	 * MPP0: GPIO (USB Over Current)	MPP1: GPIO (USB Vbat input)
	 * MPP2: PCI_REQn[2]			MPP3: PCI_GNTn[2]
	 * MPP4: PCI_REQn[3]			MPP5: PCI_GNTn[3]
	 * MPP6: GPIO (JP0, CON17.2)		MPP7: GPIO (JP1, CON17.1)
	 * MPP8: GPIO (JP2, CON11.2)		MPP9: GPIO (JP3, CON11.3)
	 * MPP10: GPIO (RTC int)		MPP11: GPIO (Baud Rate Generator)
	 * MPP12: GPIO (PCI int 1)		MPP13: GPIO (PCI int 2)
	 * MPP14: NAND_REn[2]			MPP15: NAND_WEn[2]
	 * MPP16: UART1_RX			MPP17: UART1_TX
	 * MPP18: UART1_CTS			MPP19: UART1_RTS
	 * MPP-DEV: DEV_D[16:31]
	 */
	orion5x_write(MPP_0_7_CTRL, 0x00222203);
	orion5x_write(MPP_8_15_CTRL, 0x44000000);
	orion5x_write(MPP_16_19_CTRL, 0);
	orion5x_write(MPP_DEV_CTRL, 0);

	orion5x_gpio_set_valid_pins(0x00003fc3);

	platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
	orion5x_eth_init(&db88f5281_eth_data);
}
开发者ID:janrinze，项目名称:loox7xxport，代码行数:41，代码来源:db88f5281-setup.c


注：本文中的orion5x_setup_dev_boot_win函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。