当前位置: 首页>>代码示例>>C++>>正文

C++ orion5x_eth_init函数代码示例

本文整理汇总了C++中orion5x_eth_init函数的典型用法代码示例。如果您正苦于以下问题：C++ orion5x_eth_init函数的具体用法？C++ orion5x_eth_init怎么用？C++ orion5x_eth_init使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了orion5x_eth_init函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: wrt350n_v2_init

static void __init wrt350n_v2_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(wrt350n_v2_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&wrt350n_v2_eth_data);
	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data);
	orion5x_uart0_init();

	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
				    ORION_MBUS_DEVBUS_BOOT_ATTR,
				    WRT350N_V2_NOR_BOOT_BASE,
				    WRT350N_V2_NOR_BOOT_SIZE);
	platform_device_register(&wrt350n_v2_nor_flash);
	platform_device_register(&wrt350n_v2_leds);
	platform_device_register(&wrt350n_v2_button_device);
}
开发者ID:AlexanderStein，项目名称:linux，代码行数:25，代码来源:wrt350n-v2-setup.c

示例2: rd88f5181l_ge_init

static void __init rd88f5181l_ge_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&rd88f5181l_ge_eth_data);
	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data);
	orion5x_i2c_init();
	orion5x_uart0_init();

	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
				    ORION_MBUS_DEVBUS_BOOT_ATTR,
				    RD88F5181L_GE_NOR_BOOT_BASE,
				    RD88F5181L_GE_NOR_BOOT_SIZE);
	platform_device_register(&rd88f5181l_ge_nor_boot_flash);

	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
}
开发者ID:AlexanderStein，项目名称:linux，代码行数:26，代码来源:rd88f5181l-ge-setup.c

示例3: db88f5281_init

static void __init db88f5281_init(void)
{
	orion5x_init();

	orion5x_mpp_conf(db88f5281_mpp_modes);
	writel(0, MPP_DEV_CTRL);		

	orion5x_ehci0_init();
	orion5x_eth_init(&db88f5281_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();
	orion5x_uart1_init();

	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
				DB88F5281_NOR_BOOT_SIZE);
	platform_device_register(&db88f5281_boot_flash);

	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);

	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
	platform_device_register(&db88f5281_nor_flash);

	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
	platform_device_register(&db88f5281_nand_flash);

	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:27，代码来源:db88f5281-setup.c

示例4: kurobox_pro_init

static void __init kurobox_pro_init(void)
{
	orion5x_init();

	orion5x_mpp_conf(kurobox_pro_mpp_modes);

	orion5x_ehci0_init();
	orion5x_ehci1_init();
	orion5x_eth_init(&kurobox_pro_eth_data);
	orion5x_i2c_init();
	orion5x_sata_init(&kurobox_pro_sata_data);
	orion5x_uart0_init();
	orion5x_uart1_init();
	orion5x_xor_init();

	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
				   KUROBOX_PRO_NOR_BOOT_SIZE);
	platform_device_register(&kurobox_pro_nor_flash);

	if (machine_is_kurobox_pro()) {
		orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE,
				       KUROBOX_PRO_NAND_SIZE);
		platform_device_register(&kurobox_pro_nand_flash);
	}

	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);

	
	pm_power_off = kurobox_pro_power_off;
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:30，代码来源:kurobox_pro-setup.c

示例5: dt2_init

static void __init dt2_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(dt2_mpp_modes);

	/*
	 * Configure peripherals.
	 */

	orion5x_uart0_init();
	orion5x_ehci0_init();
	orion5x_ehci1_init();
	orion5x_i2c_init();
	orion5x_sata_init(&dt2_sata_data);
	orion5x_xor_init();

	printk(KERN_INFO "U-Boot parameters:\n");
	printk(KERN_INFO "Sys Clk = %d, Tclk = %d, BoardID = 0x%02x\n", mvSysclk, mvTclk, gBoardId);

	printk(KERN_INFO "Serial: %s\n", dt2_eeprom.fc.dt2_serial_number);
	printk(KERN_INFO "Revision: %016x\n", dt2_eeprom.fc.dt2_revision);
	printk(KERN_INFO "DT2: Using MAC address %pM for port 0\n",
	       dt2_eeprom.gw.mac_addr[0]);
	printk(KERN_INFO "DT2: Using MAC address %pM for port 1\n",
	       dt2_eeprom.gw.mac_addr[1]);

	orion5x_eth_init(&dt2_eth_data);
	memcpy(dt2_eth_data.mac_addr, dt2_eeprom.gw.mac_addr[0], 6);
	orion5x_eth_switch_init(&dt2_switch_plat_data, NO_IRQ);

	i2c_register_board_info(0, &dt2_i2c_rtc, 1);

	mvebu_mbus_add_window("devbus-boot", DT2_NOR_BOOT_BASE,
			      DT2_NOR_BOOT_SIZE);

	platform_device_register(&dt2_nor_flash);

	mvebu_mbus_add_window("devbus-cs0", DT2_LEDS_BASE, DT2_LEDS_SIZE);
	platform_device_register(&dt2_leds);

	if (request_irq(gpio_to_irq(DT2_PIN_GPIO_RESET), &dt2_reset_handler,
			IRQF_DISABLED | IRQF_TRIGGER_LOW,
			"DT2: Reset button", NULL) < 0) {

		printk("DT2: Reset Button IRQ %d not available\n",
			gpio_to_irq(DT2_PIN_GPIO_RESET));
	}

	if (request_irq(gpio_to_irq(DT2_PIN_GPIO_POWER), &dt2_power_handler,
			IRQF_DISABLED | IRQF_TRIGGER_LOW,
			"DT2: Power button", NULL) < 0) {

		printk(KERN_DEBUG "DT2: Power Button IRQ %d not available\n",
			gpio_to_irq(DT2_PIN_GPIO_POWER));
	}
}
开发者ID:7LK，项目名称:McWRT，代码行数:60，代码来源:dt2-setup.c

示例6: rd88f5181l_ge_init

static void __init rd88f5181l_ge_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&rd88f5181l_ge_eth_data);
	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
				gpio_to_irq(8));
	orion5x_i2c_init();
	orion5x_uart0_init();

	orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
				   RD88F5181L_GE_NOR_BOOT_SIZE);
	platform_device_register(&rd88f5181l_ge_nor_boot_flash);

	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
}
开发者ID:CSCLOG，项目名称:beaglebone，代码行数:25，代码来源:rd88f5181l-ge-setup.c

示例7: d2net_init

static void __init d2net_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(d2net_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&d2net_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();

	d2net_sata_power_init();
	orion5x_sata_init(&d2net_sata_data);

	orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
				D2NET_NOR_BOOT_SIZE);
	platform_device_register(&d2net_nor_flash);

	platform_device_register(&d2net_gpio_buttons);

	d2net_gpio_leds_init();

	pr_notice("d2net: Flash write are not yet supported.\n");

	i2c_register_board_info(0, d2net_i2c_devices,
				ARRAY_SIZE(d2net_i2c_devices));

	orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
}
开发者ID:Lord-Devices，项目名称:cm_kernel_samsung_hlte，代码行数:35，代码来源:d2net-setup.c

示例8: db88f5281_init

static void __init db88f5281_init(void)
{
	/*
	 * Basic Orion setup. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(db88f5281_mpp_modes);
	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&db88f5281_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();
	orion5x_uart1_init();

	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
				DB88F5281_NOR_BOOT_SIZE);
	platform_device_register(&db88f5281_boot_flash);

	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);

	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
	platform_device_register(&db88f5281_nor_flash);

	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
	platform_device_register(&db88f5281_nand_flash);

	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
}
开发者ID:5victor，项目名称:linux，代码行数:33，代码来源:db88f5281-setup.c

示例9: dns323_init

static void __init dns323_init(void)
{
	/* Setup basic Orion functions. Need to be called early. */
	orion5x_init();

	orion5x_mpp_conf(dns323_mpp_modes);
	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&dns323_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();

	/* setup flash mapping
	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
	 */
	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
	platform_device_register(&dns323_nor_flash);

	platform_device_register(&dns323_gpio_leds);

	platform_device_register(&dns323_button_device);

	i2c_register_board_info(0, dns323_i2c_devices,
				ARRAY_SIZE(dns323_i2c_devices));

	/* register dns323 specific power-off method */
	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
		pr_err("DNS323: failed to setup power-off GPIO\n");
	pm_power_off = dns323_power_off;
}
开发者ID:E-LLP，项目名称:n900，代码行数:35，代码来源:dns323-setup.c

示例10: qnap_ts209_init

static void __init qnap_ts209_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(ts209_mpp_modes);

	/*
	 * MPP[20] PCI clock 0
	 * MPP[21] PCI clock 1
	 * MPP[22] USB 0 over current
	 * MPP[23-25] Reserved
	 */

	/*
	 * Configure peripherals.
	 */
	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
				    ORION_MBUS_DEVBUS_BOOT_ATTR,
				    QNAP_TS209_NOR_BOOT_BASE,
				    QNAP_TS209_NOR_BOOT_SIZE);
	platform_device_register(&qnap_ts209_nor_flash);

	orion5x_ehci0_init();
	orion5x_ehci1_init();
	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
				 qnap_ts209_partitions[5].offset,
				 qnap_ts209_partitions[5].size);
	orion5x_eth_init(&qnap_tsx09_eth_data);
	orion5x_i2c_init();
	orion5x_sata_init(&qnap_ts209_sata_data);
	orion5x_uart0_init();
	orion5x_uart1_init();
	orion5x_xor_init();

	platform_device_register(&qnap_ts209_button_device);

	/* Get RTC IRQ and register the chip */
	if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
		if (gpio_direction_input(TS209_RTC_GPIO) == 0)
			qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO);
		else
			gpio_free(TS209_RTC_GPIO);
	}
	if (qnap_ts209_i2c_rtc.irq == 0)
		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);

	/* register tsx09 specific power-off method */
	pm_power_off = qnap_tsx09_power_off;
}
开发者ID:03199618，项目名称:linux，代码行数:53，代码来源:ts209-setup.c

示例11: rd88f5181l_fxo_init

static void __init rd88f5181l_fxo_init(void)
{
	orion5x_init();

	orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);

	orion5x_ehci0_init();
	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
	orion5x_uart0_init();

	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
				   RD88F5181L_FXO_NOR_BOOT_SIZE);
	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:15，代码来源:rd88f5181l-fxo-setup.c

示例12: mss2_init

static void __init mss2_init(void)
{
	/* Setup basic Orion functions. Need to be called early. */
	orion5x_init();

	orion5x_mpp_conf(mss2_mpp_modes);

	/*
	 * MPP[20] Unused
	 * MPP[21] PCI clock
	 * MPP[22] USB 0 over current
	 * MPP[23] USB 1 over current
	 */

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_ehci1_init();
	orion5x_eth_init(&mss2_eth_data);
	orion5x_i2c_init();
	orion5x_sata_init(&mss2_sata_data);
	orion5x_uart0_init();
	orion5x_xor_init();

	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
				    ORION_MBUS_DEVBUS_BOOT_ATTR,
				    MSS2_NOR_BOOT_BASE,
				    MSS2_NOR_BOOT_SIZE);
	platform_device_register(&mss2_nor_flash);

	platform_device_register(&mss2_button_device);

	if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
		if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
			mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
		else
			gpio_free(MSS2_GPIO_RTC_IRQ);
	}
	i2c_register_board_info(0, &mss2_i2c_rtc, 1);

	/* register mss2 specific power-off method */
	pm_power_off = mss2_power_off;
}
开发者ID:01org，项目名称:KVMGT-kernel，代码行数:44，代码来源:mss2-setup.c

示例13: rd88f5181l_ge_init

static void __init rd88f5181l_ge_init(void)
{
	orion5x_init();

	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);

	orion5x_ehci0_init();
	orion5x_eth_init(&rd88f5181l_ge_eth_data);
	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
				gpio_to_irq(8));
	orion5x_i2c_init();
	orion5x_uart0_init();

	orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
				   RD88F5181L_GE_NOR_BOOT_SIZE);
	platform_device_register(&rd88f5181l_ge_nor_boot_flash);

	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:19，代码来源:rd88f5181l-ge-setup.c

示例14: rd88f6183ap_ge_init

static void __init rd88f6183ap_ge_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
				gpio_to_irq(3));
	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
	orion5x_spi_init();
	orion5x_uart0_init();
}
开发者ID:rhuitl，项目名称:linux，代码行数:19，代码来源:rd88f6183ap-ge-setup.c

示例15: qnap_ts409_init

static void __init qnap_ts409_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(ts409_mpp_modes);

	/*
	 * Configure peripherals.
	 */
	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
				   QNAP_TS409_NOR_BOOT_SIZE);
	platform_device_register(&qnap_ts409_nor_flash);

	orion5x_ehci0_init();
	qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
				 qnap_ts409_partitions[5].offset,
				 qnap_ts409_partitions[5].size);
	orion5x_eth_init(&qnap_tsx09_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();
	orion5x_uart1_init();

	platform_device_register(&qnap_ts409_button_device);

	/* Get RTC IRQ and register the chip */
	if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) {
		if (gpio_direction_input(TS409_RTC_GPIO) == 0)
			qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO);
		else
			gpio_free(TS409_RTC_GPIO);
	}
	if (qnap_ts409_i2c_rtc.irq == 0)
		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
	platform_device_register(&ts409_leds);

	/* register tsx09 specific power-off method */
	pm_power_off = qnap_tsx09_power_off;
}
开发者ID:8563，项目名称:millennium-sources，代码行数:42，代码来源:ts409-setup.c


注：本文中的orion5x_eth_init函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。