本文整理汇总了C++中edp_read函数的典型用法代码示例。如果您正苦于以下问题：C++ edp_read函数的具体用法？C++ edp_read怎么用？C++ edp_read使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了edp_read函数的14个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: edp_isr
irqreturn_t edp_isr(int irq, void *ptr)
{
struct mdss_edp_drv_pdata *ep = (struct mdss_edp_drv_pdata *)ptr;
unsigned char *base = ep->base;
u32 isr1, isr2, mask1, mask2;
u32 ack;
spin_lock(&ep->lock);
isr1 = edp_read(base + 0x308);
isr2 = edp_read(base + 0x30c);
mask1 = isr1 & ep->mask1;
mask2 = isr2 & ep->mask2;
isr1 &= ~mask1; /* remove masks bit */
isr2 &= ~mask2;
pr_debug("%s: isr=%x mask=%x isr2=%x mask2=%x\n",
__func__, isr1, mask1, isr2, mask2);
ack = isr1 & EDP_INTR_STATUS1;
ack <<= 1; /* ack bits */
ack |= mask1;
edp_write(base + 0x308, ack);
ack = isr2 & EDP_INTR_STATUS2;
ack <<= 1; /* ack bits */
ack |= mask2;
edp_write(base + 0x30c, ack);
spin_unlock(&ep->lock);
if (isr1 & EDP_INTR_HPD) {
isr1 &= ~EDP_INTR_HPD; /* clear */
edp_send_events(ep, EV_LINK_TRAIN);
}
if (isr2 & EDP_INTR_READY_FOR_VIDEO)
edp_send_events(ep, EV_VIDEO_READY);
if (isr2 & EDP_INTR_IDLE_PATTERNs_SENT)
edp_send_events(ep, EV_IDLE_PATTERNS_SENT);
if (isr1 && ep->aux_cmd_busy) {
/* clear EDP_AUX_TRANS_CTRL */
edp_write(base + 0x318, 0);
/* read EDP_INTERRUPT_TRANS_NUM */
ep->aux_trans_num = edp_read(base + 0x310);
if (ep->aux_cmd_i2c)
edp_aux_i2c_handler(ep, isr1);
else
edp_aux_native_handler(ep, isr1);
}
return IRQ_HANDLED;
}示例2: mdss_edp_clock_synchrous
void mdss_edp_clock_synchrous(struct mdss_edp_drv_pdata *ep, int sync)
{
u32 data;
u32 color;
/* EDP_MISC1_MISC0 */
data = edp_read(ep->base + 0x02c);
if (sync)
data |= 0x01;
else
data &= ~0x01;
/* only legacy rgb mode supported */
color = 0; /* 6 bits */
if (ep->edid.color_depth == 8)
color = 0x01;
else if (ep->edid.color_depth == 10)
color = 0x02;
else if (ep->edid.color_depth == 12)
color = 0x03;
else if (ep->edid.color_depth == 16)
color = 0x04;
color <<= 5; /* bit 5 to bit 7 */
data |= color;
/* EDP_MISC1_MISC0 */
edp_write(ep->base + 0x2c, data);
}示例3: edp_clock_synchrous
static void edp_clock_synchrous(struct edp_ctrl *ctrl, int sync)
{
u32 data;
enum edp_color_depth depth;
data = edp_read(ctrl->base + REG_EDP_MISC1_MISC0);
if (sync)
data |= EDP_MISC1_MISC0_SYNC;
else
data &= ~EDP_MISC1_MISC0_SYNC;
/* only legacy rgb mode supported */
depth = EDP_6BIT; /* Default */
if (ctrl->color_depth == 8)
depth = EDP_8BIT;
else if (ctrl->color_depth == 10)
depth = EDP_10BIT;
else if (ctrl->color_depth == 12)
depth = EDP_12BIT;
else if (ctrl->color_depth == 16)
depth = EDP_16BIT;
data |= EDP_MISC1_MISC0_COLOR(depth);
edp_write(ctrl->base + REG_EDP_MISC1_MISC0, data);
}示例4: edp_config_static_mdiv
static void edp_config_static_mdiv(void)
{
int ret = 0;
ret = edp_read(EDP_BASE + 0xc); /* EDP_CONFIGURATION_CTRL */
edp_write(EDP_BASE + 0xc, ret | 0x2); /* EDP_CONFIGURATION_CTRL */
edp_write(EDP_BASE + 0xc, 0x57); /* EDP_CONFIGURATION_CTRL */
}示例5: msm_edp_ctrl_irq
irqreturn_t msm_edp_ctrl_irq(struct edp_ctrl *ctrl)
{
u32 isr1, isr2, mask1, mask2;
u32 ack;
DBG("");
spin_lock(&ctrl->irq_lock);
isr1 = edp_read(ctrl->base + REG_EDP_INTERRUPT_REG_1);
isr2 = edp_read(ctrl->base + REG_EDP_INTERRUPT_REG_2);
mask1 = isr1 & EDP_INTR_MASK1;
mask2 = isr2 & EDP_INTR_MASK2;
isr1 &= ~mask1; /* remove masks bit */
isr2 &= ~mask2;
DBG("isr=%x mask=%x isr2=%x mask2=%x",
isr1, mask1, isr2, mask2);
ack = isr1 & EDP_INTR_STATUS1;
ack <<= 1; /* ack bits */
ack |= mask1;
edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, ack);
ack = isr2 & EDP_INTR_STATUS2;
ack <<= 1; /* ack bits */
ack |= mask2;
edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, ack);
spin_unlock(&ctrl->irq_lock);
if (isr1 & EDP_INTERRUPT_REG_1_HPD)
DBG("edp_hpd");
if (isr2 & EDP_INTERRUPT_REG_2_READY_FOR_VIDEO)
DBG("edp_video_ready");
if (isr2 & EDP_INTERRUPT_REG_2_IDLE_PATTERNs_SENT) {
DBG("idle_patterns_sent");
complete(&ctrl->idle_comp);
}
msm_edp_aux_irq(ctrl->aux, isr1);
return IRQ_HANDLED;
}示例6: mdss_edp_phy_ready
int mdss_edp_phy_ready(struct mdss_edp_drv_pdata *ep)
{
u32 status;
status = edp_read(ep->base + 0x598);
status &= 0x01;
return status;
}示例7: edp_config_sync
static void edp_config_sync(void)
{
int ret = 0;
ret = edp_read(EDP_BASE + 0xc); /* EDP_CONFIGURATION_CTRL */
ret &= ~0x733;
ret |= (0x55 & 0x733);
edp_write(EDP_BASE + 0xc, ret);
edp_write(EDP_BASE + 0xc, 0x55); /* EDP_CONFIGURATION_CTRL */
}示例8: mdss_edp_off
int mdss_edp_off(struct mdss_panel_data *pdata)
{
struct mdss_edp_drv_pdata *edp_drv = NULL;
int ret = 0;
edp_drv = container_of(pdata, struct mdss_edp_drv_pdata,
panel_data);
if (!edp_drv) {
pr_err("%s: Invalid input data\n", __func__);
return -EINVAL;
}
pr_debug("%s:+, cont_splash=%d\n", __func__, edp_drv->cont_splash);
/* wait until link training is completed */
mutex_lock(&edp_drv->train_mutex);
INIT_COMPLETION(edp_drv->idle_comp);
mdss_edp_state_ctrl(edp_drv, ST_PUSH_IDLE);
ret = wait_for_completion_timeout(&edp_drv->idle_comp,
msecs_to_jiffies(100));
if (ret == 0)
pr_err("%s: idle pattern timedout\n", __func__);
mdss_edp_state_ctrl(edp_drv, 0);
mdss_edp_sink_power_state(edp_drv, SINK_POWER_OFF);
mdss_edp_irq_disable(edp_drv);
gpio_set_value(edp_drv->gpio_panel_en, 0);
if (gpio_is_valid(edp_drv->gpio_lvl_en))
gpio_set_value(edp_drv->gpio_lvl_en, 0);
if (edp_drv->bl_pwm != NULL)
pwm_disable(edp_drv->bl_pwm);
edp_drv->is_pwm_enabled = 0;
mdss_edp_mainlink_reset(edp_drv);
mdss_edp_mainlink_ctrl(edp_drv, 0);
mdss_edp_lane_power_ctrl(edp_drv, 0);
mdss_edp_phy_power_ctrl(edp_drv, 0);
mdss_edp_clk_disable(edp_drv);
mdss_edp_unprepare_clocks(edp_drv);
mdss_edp_aux_ctrl(edp_drv, 0);
pr_debug("%s-: state_ctrl=%x\n", __func__,
edp_read(edp_drv->base + 0x8));
mutex_unlock(&edp_drv->train_mutex);
return 0;
}示例9: mdss_edp_aux_ctrl
void mdss_edp_aux_ctrl(struct mdss_edp_drv_pdata *ep, int enable)
{
u32 data;
data = edp_read(ep->base + 0x300);
if (enable)
data |= 0x01;
else
data |= ~0x01;
edp_write(ep->base + 0x300, data); /* EDP_AUX_CTRL */
}示例10: mdss_edp_mainlink_ctrl
void mdss_edp_mainlink_ctrl(struct mdss_edp_drv_pdata *ep, int enable)
{
u32 data;
data = edp_read(ep->base + 0x04);
data &= ~BIT(0);
if (enable)
data |= 0x1;
edp_write(ep->base + 0x04, data);
}示例11: mdss_edp_mainlink_ready
int mdss_edp_mainlink_ready(struct mdss_edp_drv_pdata *ep, u32 which)
{
u32 data;
int cnt = 10;
while (--cnt) {
data = edp_read(ep->base + 0x84); /* EDP_MAINLINK_READY */
if (data & which) {
pr_debug("%s: which=%x ready\n", __func__, which);
return 1;
}
usleep(1000);
}
pr_err("%s: which=%x NOT ready\n", __func__, which);
return 0;
}示例12: edp_host_train_set
static void edp_host_train_set(struct edp_ctrl *ctrl, u32 train)
{
int cnt = 10;
u32 data;
u32 shift = train - 1;
DBG("train=%d", train);
edp_state_ctrl(ctrl, EDP_STATE_CTRL_TRAIN_PATTERN_1 << shift);
while (--cnt) {
data = edp_read(ctrl->base + REG_EDP_MAINLINK_READY);
if (data & (EDP_MAINLINK_READY_TRAIN_PATTERN_1_READY << shift))
break;
}
if (cnt == 0)
pr_err("%s: set link_train=%d failed\n", __func__, train);
}示例13: mdss_edp_phy_pll_ready
int mdss_edp_phy_pll_ready(struct mdss_edp_drv_pdata *ep)
{
int cnt;
u32 status = 0;
cnt = 100;
while (--cnt) {
status = edp_read(ep->base + 0x6c0);
if (status & 0x01)
break;
usleep(100);
}
pr_debug("%s: PLL cnt=%d status=%x\n", __func__, cnt, (int)status);
if (cnt <= 0) {
pr_err("%s: PLL NOT ready\n", __func__);
return 0;
} else
return 1;
}示例14: mdss_edp_clk_debug
void mdss_edp_clk_debug(unsigned char *edp_base, unsigned char *mmss_cc_base)
{
u32 da4, da0, d32c;
u32 dc4, dc0, d330;
/* pixel clk */
da0 = edp_read(mmss_cc_base + 0x0a0);
da4 = edp_read(mmss_cc_base + 0x0a4);
d32c = edp_read(mmss_cc_base + 0x32c);
/* main link clk */
dc0 = edp_read(mmss_cc_base + 0x0c0);
dc4 = edp_read(mmss_cc_base + 0x0c4);
d330 = edp_read(mmss_cc_base + 0x330);
pr_err("%s: da0=%x da4=%x d32c=%x dc0=%x dc4=%x d330=%x\n", __func__,
(int)da0, (int)da4, (int)d32c, (int)dc0, (int)dc4, (int)d330);
}