C++ devm_clk_get函数代码示例

static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
			     void *data)
{
	const struct of_device_id *of_id =
			of_match_device(dw_mipi_dsi_dt_ids, dev);
	const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
	struct platform_device *pdev = to_platform_device(dev);
	struct drm_device *drm = data;
	struct dw_mipi_dsi *dsi;
	struct resource *res;
	int ret;

	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
	if (!dsi)
		return -ENOMEM;

	dsi->dev = dev;
	dsi->pdata = pdata;

	ret = rockchip_mipi_parse_dt(dsi);
	if (ret)
		return ret;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res)
		return -ENODEV;

	dsi->base = devm_ioremap_resource(dev, res);
	if (IS_ERR(dsi->base))
		return PTR_ERR(dsi->base);

	dsi->pllref_clk = devm_clk_get(dev, "ref");
	if (IS_ERR(dsi->pllref_clk)) {
		ret = PTR_ERR(dsi->pllref_clk);
		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
		return ret;
	}

	dsi->pclk = devm_clk_get(dev, "pclk");
	if (IS_ERR(dsi->pclk)) {
		ret = PTR_ERR(dsi->pclk);
		dev_err(dev, "Unable to get pclk: %d\n", ret);
		return ret;
	}

	ret = clk_prepare_enable(dsi->pllref_clk);
	if (ret) {
		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
		return ret;
	}

	ret = dw_mipi_dsi_register(drm, dsi);
	if (ret) {
		dev_err(dev, "Failed to register mipi_dsi: %d\n", ret);
		goto err_pllref;
	}

	dev_set_drvdata(dev, dsi);

	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
	dsi->dsi_host.dev = dev;
	return mipi_dsi_host_register(&dsi->dsi_host);

err_pllref:
	clk_disable_unprepare(dsi->pllref_clk);
	return ret;
}

static int xhci_plat_probe(struct platform_device *pdev)
{
	struct device_node	*node = pdev->dev.of_node;
	struct usb_xhci_pdata	*pdata = dev_get_platdata(&pdev->dev);
	const struct of_device_id *match;
	const struct hc_driver	*driver;
	struct xhci_hcd		*xhci;
	struct resource         *res;
	struct usb_hcd		*hcd;
	struct clk              *clk;
	int			ret;
	int			irq;

	if (usb_disabled())
		return -ENODEV;

	driver = &xhci_plat_hc_driver;

	irq = platform_get_irq(pdev, 0);
	if (irq < 0)
		return -ENODEV;

	/* Try to set 64-bit DMA first */
	if (WARN_ON(!pdev->dev.dma_mask))
		/* Platform did not initialize dma_mask */
		ret = dma_coerce_mask_and_coherent(&pdev->dev,
						   DMA_BIT_MASK(64));
	else
		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));

	/* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
	if (ret) {
		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
		if (ret)
			return ret;
	}

	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
	if (!hcd)
		return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(hcd->regs)) {
		ret = PTR_ERR(hcd->regs);
		goto put_hcd;
	}

	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);

	/*
	 * Not all platforms have a clk so it is not an error if the
	 * clock does not exists.
	 */
	clk = devm_clk_get(&pdev->dev, NULL);
	if (!IS_ERR(clk)) {
		ret = clk_prepare_enable(clk);
		if (ret)
			goto put_hcd;
	}

	xhci = hcd_to_xhci(hcd);
	match = of_match_node(usb_xhci_of_match, node);
	if (match) {
		const struct xhci_plat_priv *priv_match = match->data;
		struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);

		/* Just copy data for now */
		if (priv_match)
			*priv = *priv_match;
	}

	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_MARVELL_ARMADA)) {
		ret = xhci_mvebu_mbus_init_quirk(pdev);
		if (ret)
			goto disable_clk;
	}

	device_wakeup_enable(hcd->self.controller);

	xhci->clk = clk;
	xhci->main_hcd = hcd;
	xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
			dev_name(&pdev->dev), hcd);
	if (!xhci->shared_hcd) {
		ret = -ENOMEM;
		goto disable_clk;
	}

	if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
			(pdata && pdata->usb3_lpm_capable))
		xhci->quirks |= XHCI_LPM_SUPPORT;

	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
		xhci->shared_hcd->can_do_streams = 1;

	hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
	if (IS_ERR(hcd->usb_phy)) {
		ret = PTR_ERR(hcd->usb_phy);
//.........这里部分代码省略.........

static int spear13xx_pcie_probe(struct platform_device *pdev)
{
	struct spear13xx_pcie *spear13xx_pcie;
	struct pcie_port *pp;
	struct device *dev = &pdev->dev;
	struct device_node *np = pdev->dev.of_node;
	struct resource *dbi_base;
	int ret;

	spear13xx_pcie = devm_kzalloc(dev, sizeof(*spear13xx_pcie), GFP_KERNEL);
	if (!spear13xx_pcie)
		return -ENOMEM;

	spear13xx_pcie->phy = devm_phy_get(dev, "pcie-phy");
	if (IS_ERR(spear13xx_pcie->phy)) {
		ret = PTR_ERR(spear13xx_pcie->phy);
		if (ret == -EPROBE_DEFER)
			dev_info(dev, "probe deferred\n");
		else
			dev_err(dev, "couldn't get pcie-phy\n");
		return ret;
	}

	phy_init(spear13xx_pcie->phy);

	spear13xx_pcie->clk = devm_clk_get(dev, NULL);
	if (IS_ERR(spear13xx_pcie->clk)) {
		dev_err(dev, "couldn't get clk for pcie\n");
		return PTR_ERR(spear13xx_pcie->clk);
	}
	ret = clk_prepare_enable(spear13xx_pcie->clk);
	if (ret) {
		dev_err(dev, "couldn't enable clk for pcie\n");
		return ret;
	}

	pp = &spear13xx_pcie->pp;

	pp->dev = dev;

	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
	pp->dbi_base = devm_ioremap_resource(dev, dbi_base);
	if (IS_ERR(pp->dbi_base)) {
		dev_err(dev, "couldn't remap dbi base %p\n", dbi_base);
		ret = PTR_ERR(pp->dbi_base);
		goto fail_clk;
	}
	spear13xx_pcie->app_base = pp->dbi_base + 0x2000;

	if (of_property_read_bool(np, "st,pcie-is-gen1"))
		spear13xx_pcie->is_gen1 = true;

	ret = spear13xx_add_pcie_port(pp, pdev);
	if (ret < 0)
		goto fail_clk;

	platform_set_drvdata(pdev, spear13xx_pcie);
	return 0;

fail_clk:
	clk_disable_unprepare(spear13xx_pcie->clk);

	return ret;
}

static int __devinit pil_pronto_probe(struct platform_device *pdev)
{
	struct pronto_data *drv;
	struct resource *res;
	struct pil_desc *desc;
	int ret;
	uint32_t regval;

	drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
	if (!drv)
		return -ENOMEM;
	platform_set_drvdata(pdev, drv);

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pmu_base");
	drv->base = devm_request_and_ioremap(&pdev->dev, res);
	if (!drv->base)
		return -ENOMEM;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "clk_base");
	drv->reset_base = devm_request_and_ioremap(&pdev->dev, res);
	if (!drv->reset_base)
		return -ENOMEM;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "halt_base");
	drv->axi_halt_base = devm_request_and_ioremap(&pdev->dev, res);
	if (!drv->axi_halt_base)
		return -ENOMEM;

	desc = &drv->desc;
	ret = of_property_read_string(pdev->dev.of_node, "qcom,firmware-name",
				      &desc->name);
	if (ret)
		return ret;

	desc->dev = &pdev->dev;
	desc->owner = THIS_MODULE;
	desc->proxy_timeout = 10000;

	if (pas_supported(PAS_WCNSS) > 0) {
		desc->ops = &pil_pronto_ops_trusted;
		dev_info(&pdev->dev, "using secure boot\n");
	} else {
		desc->ops = &pil_pronto_ops;
		dev_info(&pdev->dev, "using non-secure boot\n");
	}

	drv->vreg = devm_regulator_get(&pdev->dev, "vdd_pronto_pll");
	if (IS_ERR(drv->vreg)) {
		dev_err(&pdev->dev, "failed to get pronto pll supply");
		return PTR_ERR(drv->vreg);
	}

	ret = regulator_set_voltage(drv->vreg, 1800000, 1800000);
	if (ret) {
		dev_err(&pdev->dev, "failed to set pll supply voltage\n");
		return ret;
	}

	ret = regulator_set_optimum_mode(drv->vreg, 18000);
	if (ret < 0) {
		dev_err(&pdev->dev, "failed to set pll supply mode\n");
		return ret;
	}

	drv->cxo = devm_clk_get(&pdev->dev, "xo");
	if (IS_ERR(drv->cxo))
		return PTR_ERR(drv->cxo);

	scm_pas_init(MSM_BUS_MASTER_CRYPTO_CORE0);

	ret = pil_desc_init(desc);
	if (ret)
		return ret;

	drv->subsys_desc.name = desc->name;
	drv->subsys_desc.dev = &pdev->dev;
	drv->subsys_desc.owner = THIS_MODULE;
	drv->subsys_desc.shutdown = wcnss_shutdown;
	drv->subsys_desc.powerup = wcnss_powerup;
	drv->subsys_desc.ramdump = wcnss_ramdump;
	drv->subsys_desc.crash_shutdown = crash_shutdown;
	drv->subsys_desc.start = pronto_start;
	drv->subsys_desc.stop = pronto_stop;
	drv->subsys_desc.err_fatal_handler = wcnss_err_fatal_intr_handler;
	drv->subsys_desc.wdog_bite_handler = wcnss_wdog_bite_irq_hdlr;

	INIT_DELAYED_WORK(&drv->cancel_vote_work, wcnss_post_bootup);
	INIT_WORK(&drv->wcnss_wdog_bite_work, wcnss_wdog_bite_work_hdlr);

//S [VY52/VY55][bug_1807] Frank_Chan add
	INIT_DELAYED_WORK(&drv->subsys_crash_work, wcnss_subsys_crash_info);
//E [VY52/VY55][bug_1807] Frank_Chan add

	drv->subsys = subsys_register(&drv->subsys_desc);
	if (IS_ERR(drv->subsys)) {
		ret = PTR_ERR(drv->subsys);
		goto err_subsys;
	}

	drv->ramdump_dev = create_ramdump_device("pronto", &pdev->dev);
//.........这里部分代码省略.........

//.........这里部分代码省略.........
#endif

static int dw_probe(struct platform_device *pdev)
{
	struct dw_dma_chip *chip;
	struct device *dev = &pdev->dev;
	struct resource *mem;
	const struct acpi_device_id *id;
	struct dw_dma_platform_data *pdata;
	int err;

	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
	if (!chip)
		return -ENOMEM;

	chip->irq = platform_get_irq(pdev, 0);
	if (chip->irq < 0)
		return chip->irq;

	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	chip->regs = devm_ioremap_resource(dev, mem);
	if (IS_ERR(chip->regs))
		return PTR_ERR(chip->regs);

	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
	if (err)
		return err;

	pdata = dev_get_platdata(dev);
	if (!pdata)
		pdata = dw_dma_parse_dt(pdev);
	if (!pdata && has_acpi_companion(dev)) {
		id = acpi_match_device(dev->driver->acpi_match_table, dev);
		if (id)
			pdata = (struct dw_dma_platform_data *)id->driver_data;
	}

	chip->dev = dev;

	chip->clk = devm_clk_get(chip->dev, "hclk");
	if (IS_ERR(chip->clk))
		return PTR_ERR(chip->clk);
	err = clk_prepare_enable(chip->clk);
	if (err)
		return err;

	pm_runtime_enable(&pdev->dev);

	err = dw_dma_probe(chip, pdata);
	if (err)
		goto err_dw_dma_probe;

	platform_set_drvdata(pdev, chip);

	if (pdev->dev.of_node) {
		err = of_dma_controller_register(pdev->dev.of_node,
						 dw_dma_of_xlate, chip->dw);
		if (err)
			dev_err(&pdev->dev,
				"could not register of_dma_controller\n");
	}

	if (ACPI_HANDLE(&pdev->dev))
		dw_dma_acpi_controller_register(chip->dw);

	return 0;

err_dw_dma_probe:
	pm_runtime_disable(&pdev->dev);
	clk_disable_unprepare(chip->clk);
	return err;
}

static int dw_remove(struct platform_device *pdev)
{
	struct dw_dma_chip *chip = platform_get_drvdata(pdev);

	if (pdev->dev.of_node)
		of_dma_controller_free(pdev->dev.of_node);

	dw_dma_remove(chip);
	pm_runtime_disable(&pdev->dev);
	clk_disable_unprepare(chip->clk);

	return 0;
}

static void dw_shutdown(struct platform_device *pdev)
{
	struct dw_dma_chip *chip = platform_get_drvdata(pdev);

	dw_dma_disable(chip);
	clk_disable_unprepare(chip->clk);
}

#ifdef CONFIG_OF
static const struct of_device_id dw_dma_of_id_table[] = {
	{ .compatible = "snps,dma-spear1340" },
	{}
};

/**
 * This function is called by the driver framework to initialize the MIPI CSI2
 * device.
 *
 * @param	pdev	The device structure for the MIPI CSI2 passed in by the
 *			driver framework.
 *
 * @return      Returns 0 on success or negative error code on error
 */
static int mipi_csi2_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct device_node *np = pdev->dev.of_node;
	struct resource *res;
	u32 mipi_csi2_dphy_ver;
	int ret;

	gmipi_csi2 = kmalloc(sizeof(struct mipi_csi2_info), GFP_KERNEL);
	if (!gmipi_csi2) {
		ret = -ENOMEM;
		goto alloc_failed;
	}

	ret = of_property_read_u32(np, "ipu_id", &(gmipi_csi2->ipu_id));
	if (ret) {
		dev_err(&pdev->dev, "ipu_id missing or invalid\n");
		goto err;
	}

	ret = of_property_read_u32(np, "csi_id", &(gmipi_csi2->csi_id));
	if (ret) {
		dev_err(&pdev->dev, "csi_id missing or invalid\n");
		goto err;
	}

	ret = of_property_read_u32(np, "v_channel", &(gmipi_csi2->v_channel));
	if (ret) {
		dev_err(&pdev->dev, "v_channel missing or invalid\n");
		goto err;
	}

	ret = of_property_read_u32(np, "lanes", &(gmipi_csi2->lanes));
	if (ret) {
		dev_err(&pdev->dev, "lanes missing or invalid\n");
		goto err;
	}

	if ((gmipi_csi2->ipu_id < 0) || (gmipi_csi2->ipu_id > 1) ||
		(gmipi_csi2->csi_id > 1) || (gmipi_csi2->v_channel > 3) ||
		(gmipi_csi2->lanes > 4)) {
		dev_err(&pdev->dev, "invalid param for mipi csi2!\n");
		ret = -EINVAL;
		goto err;
	}

	/* initialize mutex */
	mutex_init(&gmipi_csi2->mutex_lock);

	/* get mipi csi2 informaiton */
	gmipi_csi2->pdev = pdev;
	gmipi_csi2->mipi_en = false;

	gmipi_csi2->cfg_clk = devm_clk_get(dev, "cfg_clk");
	if (IS_ERR(gmipi_csi2->cfg_clk)) {
		dev_err(&pdev->dev, "failed to get cfg_clk\n");
		ret = PTR_ERR(gmipi_csi2->cfg_clk);
		goto err;
	}

	/* get mipi dphy clk */
	gmipi_csi2->dphy_clk = devm_clk_get(dev, "dphy_clk");
	if (IS_ERR(gmipi_csi2->dphy_clk)) {
		dev_err(&pdev->dev, "failed to get dphy pll_ref_clk\n");
		ret = PTR_ERR(gmipi_csi2->dphy_clk);
		goto err;
	}

	/* get mipi to ipu pixel clk */
	gmipi_csi2->pixel_clk = devm_clk_get(dev, "pixel_clk");
	if (IS_ERR(gmipi_csi2->pixel_clk)) {
		dev_err(&pdev->dev, "failed to get mipi pixel clk\n");
		ret = PTR_ERR(gmipi_csi2->pixel_clk);
		goto err;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		ret = -ENODEV;
		goto err;
	}

	/* mipi register mapping */
	gmipi_csi2->mipi_csi2_base = ioremap(res->start, PAGE_SIZE);
	if (!gmipi_csi2->mipi_csi2_base) {
		ret = -ENOMEM;
		goto err;
	}

	/* mipi dphy clk enable for register access */
	clk_prepare_enable(gmipi_csi2->dphy_clk);
//.........这里部分代码省略.........

static int msm_ssphy_qmp_probe(struct platform_device *pdev)
{
	struct msm_ssphy_qmp *phy;
	struct device *dev = &pdev->dev;
	struct resource *res;
	int ret = 0;

	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
	if (!phy)
		return -ENOMEM;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
						"qmp_phy_base");
	phy->base = devm_ioremap_resource(dev, res);
	if (IS_ERR(phy->base))
		return PTR_ERR(phy->base);

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
						"qmp_ahb2phy_base");
	phy->ahb2phy = devm_ioremap_resource(dev, res);
	if (IS_ERR(phy->ahb2phy)) {
		dev_err(dev, "couldn't find qmp_ahb2phy_base address.\n");
		phy->ahb2phy = NULL;
	}

	phy->emulation = of_property_read_bool(dev->of_node,
						"qcom,emulation");

	ret = of_property_read_u32_array(dev->of_node, "qcom,vdd-voltage-level",
					 (u32 *) phy->vdd_levels,
					 ARRAY_SIZE(phy->vdd_levels));
	if (ret) {
		dev_err(dev, "error reading qcom,vdd-voltage-level property\n");
		return ret;
	}

	phy->vdd = devm_regulator_get(dev, "vdd");
	if (IS_ERR(phy->vdd)) {
		dev_err(dev, "unable to get vdd supply\n");
		return PTR_ERR(phy->vdd);
	}

	phy->vdda18 = devm_regulator_get(dev, "vdda18");
	if (IS_ERR(phy->vdda18)) {
		dev_err(dev, "unable to get vdda18 supply\n");
		return PTR_ERR(phy->vdda18);
	}

	ret = msm_ssusb_qmp_config_vdd(phy, 1);
	if (ret) {
		dev_err(dev, "ssusb vdd_dig configuration failed\n");
		return ret;
	}

	ret = regulator_enable(phy->vdd);
	if (ret) {
		dev_err(dev, "unable to enable the ssusb vdd_dig\n");
		goto unconfig_ss_vdd;
	}

	ret = msm_ssusb_qmp_ldo_enable(phy, 1);
	if (ret) {
		dev_err(dev, "ssusb vreg enable failed\n");
		goto disable_ss_vdd;
	}

	phy->ldo_clk = devm_clk_get(dev, "ldo_clk");
	if (!IS_ERR(phy->ldo_clk))
		clk_prepare_enable(phy->ldo_clk);

	platform_set_drvdata(pdev, phy);

	if (of_property_read_bool(dev->of_node, "qcom,vbus-valid-override"))
		phy->phy.flags |= PHY_VBUS_VALID_OVERRIDE;

	phy->override_pll_cal = of_property_read_bool(dev->of_node,
					"qcom,override-pll-calibration");
	if (phy->override_pll_cal)
		dev_info(dev, "Override PHY PLL calibration is enabled.\n");

	phy->misc_config = of_property_read_bool(dev->of_node,
					"qcom,qmp-misc-config");
	if (phy->misc_config)
		dev_info(dev, "Miscellaneous configurations are enabled.\n");

	phy->switch_pipe_clk_src = !of_property_read_bool(dev->of_node,
					"qcom,no-pipe-clk-switch");

	phy->phy.dev			= dev;
	phy->phy.init			= msm_ssphy_qmp_init;
	phy->phy.set_suspend		= msm_ssphy_qmp_set_suspend;
	phy->phy.set_params		= msm_ssphy_qmp_set_params;
	phy->phy.notify_connect		= msm_ssphy_qmp_notify_connect;
	phy->phy.notify_disconnect	= msm_ssphy_qmp_notify_disconnect;
	phy->phy.reset			= msm_ssphy_qmp_reset;
	phy->phy.type			= USB_PHY_TYPE_USB3;

	ret = usb_add_phy_dev(&phy->phy);
	if (ret)
		goto disable_ss_ldo;
//.........这里部分代码省略.........

static int dw8250_probe(struct platform_device *pdev)
{
	struct uart_8250_port uart = {};
	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	int irq = platform_get_irq(pdev, 0);
	struct uart_port *p = &uart.port;
	struct device *dev = &pdev->dev;
	struct dw8250_data *data;
	int err;
	u32 val;

	if (!regs) {
		dev_err(dev, "no registers defined\n");
		return -EINVAL;
	}

	if (irq < 0) {
		if (irq != -EPROBE_DEFER)
			dev_err(dev, "cannot get irq\n");
		return irq;
	}

	spin_lock_init(&p->lock);
	p->mapbase	= regs->start;
	p->irq		= irq;
	p->handle_irq	= dw8250_handle_irq;
	p->pm		= dw8250_do_pm;
	p->type		= PORT_8250;
	p->flags	= UPF_SHARE_IRQ | UPF_FIXED_PORT;
	p->dev		= dev;
	p->iotype	= UPIO_MEM;
	p->serial_in	= dw8250_serial_in;
	p->serial_out	= dw8250_serial_out;

	p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
	if (!p->membase)
		return -ENOMEM;

	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
	if (!data)
		return -ENOMEM;

	data->dma.fn = dw8250_fallback_dma_filter;
	data->usr_reg = DW_UART_USR;
	p->private_data = data;

	data->uart_16550_compatible = device_property_read_bool(dev,
						"snps,uart-16550-compatible");

	err = device_property_read_u32(dev, "reg-shift", &val);
	if (!err)
		p->regshift = val;

	err = device_property_read_u32(dev, "reg-io-width", &val);
	if (!err && val == 4) {
		p->iotype = UPIO_MEM32;
		p->serial_in = dw8250_serial_in32;
		p->serial_out = dw8250_serial_out32;
	}

	if (device_property_read_bool(dev, "dcd-override")) {
		/* Always report DCD as active */
		data->msr_mask_on |= UART_MSR_DCD;
		data->msr_mask_off |= UART_MSR_DDCD;
	}

	if (device_property_read_bool(dev, "dsr-override")) {
		/* Always report DSR as active */
		data->msr_mask_on |= UART_MSR_DSR;
		data->msr_mask_off |= UART_MSR_DDSR;
	}

	if (device_property_read_bool(dev, "cts-override")) {
		/* Always report CTS as active */
		data->msr_mask_on |= UART_MSR_CTS;
		data->msr_mask_off |= UART_MSR_DCTS;
	}

	if (device_property_read_bool(dev, "ri-override")) {
		/* Always report Ring indicator as inactive */
		data->msr_mask_off |= UART_MSR_RI;
		data->msr_mask_off |= UART_MSR_TERI;
	}

	/* Always ask for fixed clock rate from a property. */
	device_property_read_u32(dev, "clock-frequency", &p->uartclk);

	/* If there is separate baudclk, get the rate from it. */
	data->clk = devm_clk_get(dev, "baudclk");
	if (IS_ERR(data->clk) && PTR_ERR(data->clk) != -EPROBE_DEFER)
		data->clk = devm_clk_get(dev, NULL);
	if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER)
		return -EPROBE_DEFER;
	if (!IS_ERR_OR_NULL(data->clk)) {
		err = clk_prepare_enable(data->clk);
		if (err)
			dev_warn(dev, "could not enable optional baudclk: %d\n",
				 err);
		else
			p->uartclk = clk_get_rate(data->clk);
//.........这里部分代码省略.........

int pcm512x_probe(struct device *dev, struct regmap *regmap)
{
	struct pcm512x_priv *pcm512x;
	int i, ret;

	pcm512x = devm_kzalloc(dev, sizeof(struct pcm512x_priv), GFP_KERNEL);
	if (!pcm512x)
		return -ENOMEM;

	dev_set_drvdata(dev, pcm512x);
	pcm512x->regmap = regmap;

	for (i = 0; i < ARRAY_SIZE(pcm512x->supplies); i++)
		pcm512x->supplies[i].supply = pcm512x_supply_names[i];

	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pcm512x->supplies),
				      pcm512x->supplies);
	if (ret != 0) {
		dev_err(dev, "Failed to get supplies: %d\n", ret);
		return ret;
	}

	pcm512x->supply_nb[0].notifier_call = pcm512x_regulator_event_0;
	pcm512x->supply_nb[1].notifier_call = pcm512x_regulator_event_1;
	pcm512x->supply_nb[2].notifier_call = pcm512x_regulator_event_2;

	for (i = 0; i < ARRAY_SIZE(pcm512x->supplies); i++) {
		ret = regulator_register_notifier(pcm512x->supplies[i].consumer,
						  &pcm512x->supply_nb[i]);
		if (ret != 0) {
			dev_err(dev,
				"Failed to register regulator notifier: %d\n",
				ret);
		}
	}

	ret = regulator_bulk_enable(ARRAY_SIZE(pcm512x->supplies),
				    pcm512x->supplies);
	if (ret != 0) {
		dev_err(dev, "Failed to enable supplies: %d\n", ret);
		return ret;
	}

	/* Reset the device, verifying I/O in the process for I2C */
	ret = regmap_write(regmap, PCM512x_RESET,
			   PCM512x_RSTM | PCM512x_RSTR);
	if (ret != 0) {
		dev_err(dev, "Failed to reset device: %d\n", ret);
		goto err;
	}

	ret = regmap_write(regmap, PCM512x_RESET, 0);
	if (ret != 0) {
		dev_err(dev, "Failed to reset device: %d\n", ret);
		goto err;
	}

	pcm512x->sclk = devm_clk_get(dev, NULL);
	if (IS_ERR(pcm512x->sclk)) {
		if (PTR_ERR(pcm512x->sclk) == -EPROBE_DEFER)
			return -EPROBE_DEFER;

		dev_info(dev, "No SCLK, using BCLK: %ld\n",
			 PTR_ERR(pcm512x->sclk));

		/* Disable reporting of missing SCLK as an error */
		regmap_update_bits(regmap, PCM512x_ERROR_DETECT,
				   PCM512x_IDCH, PCM512x_IDCH);

		/* Switch PLL input to BCLK */
		regmap_update_bits(regmap, PCM512x_PLL_REF,
				   PCM512x_SREF, PCM512x_SREF);
	} else {
		ret = clk_prepare_enable(pcm512x->sclk);
		if (ret != 0) {
			dev_err(dev, "Failed to enable SCLK: %d\n", ret);
			return ret;
		}
	}

	/* Default to standby mode */
	ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER,
				 PCM512x_RQST, PCM512x_RQST);
	if (ret != 0) {
		dev_err(dev, "Failed to request standby: %d\n",
			ret);
		goto err_clk;
	}

	pm_runtime_set_active(dev);
	pm_runtime_enable(dev);
	pm_runtime_idle(dev);

	ret = snd_soc_register_codec(dev, &pcm512x_codec_driver,
				    &pcm512x_dai, 1);
	if (ret != 0) {
		dev_err(dev, "Failed to register CODEC: %d\n", ret);
		goto err_pm;
	}

//.........这里部分代码省略.........

static int img_ir_probe(struct platform_device *pdev)
{
	struct img_ir_priv *priv;
	struct resource *res_regs;
	int irq, error, error2;

	/* Get resources from platform device */
	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
		dev_err(&pdev->dev, "cannot find IRQ resource\n");
		return irq;
	}

	/* Private driver data */
	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	platform_set_drvdata(pdev, priv);
	priv->dev = &pdev->dev;
	spin_lock_init(&priv->lock);

	/* Ioremap the registers */
	res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	priv->reg_base = devm_ioremap_resource(&pdev->dev, res_regs);
	if (IS_ERR(priv->reg_base))
		return PTR_ERR(priv->reg_base);

	/* Get core clock */
	priv->clk = devm_clk_get(&pdev->dev, "core");
	if (IS_ERR(priv->clk))
		dev_warn(&pdev->dev, "cannot get core clock resource\n");

	/* Get sys clock */
	priv->sys_clk = devm_clk_get(&pdev->dev, "sys");
	if (IS_ERR(priv->sys_clk))
		dev_warn(&pdev->dev, "cannot get sys clock resource\n");
	/*
	 * Enabling the system clock before the register interface is
	 * accessed. ISR shouldn't get called with Sys Clock disabled,
	 * hence exiting probe with an error.
	 */
	if (!IS_ERR(priv->sys_clk)) {
		error = clk_prepare_enable(priv->sys_clk);
		if (error) {
			dev_err(&pdev->dev, "cannot enable sys clock\n");
			return error;
		}
	}

	/* Set up raw & hw decoder */
	error = img_ir_probe_raw(priv);
	error2 = img_ir_probe_hw(priv);
	if (error && error2) {
		if (error == -ENODEV)
			error = error2;
		goto err_probe;
	}

	/* Get the IRQ */
	priv->irq = irq;
	error = request_irq(priv->irq, img_ir_isr, 0, "img-ir", priv);
	if (error) {
		dev_err(&pdev->dev, "cannot register IRQ %u\n",
			priv->irq);
		error = -EIO;
		goto err_irq;
	}

	img_ir_ident(priv);
	img_ir_setup(priv);

	return 0;

err_irq:
	img_ir_remove_hw(priv);
	img_ir_remove_raw(priv);
err_probe:
	if (!IS_ERR(priv->sys_clk))
		clk_disable_unprepare(priv->sys_clk);
	return error;
}

int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index)
{
	static const unsigned int mmio_offsets[] = {
		DU0_REG_OFFSET, DU1_REG_OFFSET, DU2_REG_OFFSET
	};

	struct rcar_du_device *rcdu = rgrp->dev;
	struct platform_device *pdev = to_platform_device(rcdu->dev);
	struct rcar_du_crtc *rcrtc = &rcdu->crtcs[index];
	struct drm_crtc *crtc = &rcrtc->crtc;
	unsigned int irqflags;
	char clk_name[5];
	char *name;
	int irq;
	int ret;

	/* Get the CRTC clock. */
	if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CRTC_IRQ_CLOCK)) {
		sprintf(clk_name, "du.%u", index);
		name = clk_name;
	} else {
		name = NULL;
	}

	rcrtc->clock = devm_clk_get(rcdu->dev, name);
	if (IS_ERR(rcrtc->clock)) {
		dev_err(rcdu->dev, "no clock for CRTC %u\n", index);
		return PTR_ERR(rcrtc->clock);
	}

	rcrtc->group = rgrp;
	rcrtc->mmio_offset = mmio_offsets[index];
	rcrtc->index = index;
	rcrtc->dpms = DRM_MODE_DPMS_OFF;
	rcrtc->plane = &rgrp->planes.planes[index % 2];

	rcrtc->plane->crtc = crtc;

	ret = drm_crtc_init(rcdu->ddev, crtc, &crtc_funcs);
	if (ret < 0)
		return ret;

	drm_crtc_helper_add(crtc, &crtc_helper_funcs);

	/* Register the interrupt handler. */
	if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CRTC_IRQ_CLOCK)) {
		irq = platform_get_irq(pdev, index);
		irqflags = 0;
	} else {
		irq = platform_get_irq(pdev, 0);
		irqflags = IRQF_SHARED;
	}

	if (irq < 0) {
		dev_err(rcdu->dev, "no IRQ for CRTC %u\n", index);
		return ret;
	}

	ret = devm_request_irq(rcdu->dev, irq, rcar_du_crtc_irq, irqflags,
			       dev_name(rcdu->dev), rcrtc);
	if (ret < 0) {
		dev_err(rcdu->dev,
			"failed to register IRQ for CRTC %u\n", index);
		return ret;
	}

	return 0;
}

static int st_ohci_platform_probe(struct platform_device *dev)
{
	struct usb_hcd *hcd;
	struct resource *res_mem;
	struct usb_ohci_pdata *pdata = &ohci_platform_defaults;
	struct st_ohci_platform_priv *priv;
	struct ohci_hcd *ohci;
	int err, irq, clk = 0;

	if (usb_disabled())
		return -ENODEV;

	irq = platform_get_irq(dev, 0);
	if (irq < 0) {
		dev_err(&dev->dev, "no irq provided");
		return irq;
	}

	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
	if (!res_mem) {
		dev_err(&dev->dev, "no memory resource provided");
		return -ENXIO;
	}

	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
			dev_name(&dev->dev));
	if (!hcd)
		return -ENOMEM;

	platform_set_drvdata(dev, hcd);
	dev->dev.platform_data = pdata;
	priv = hcd_to_ohci_priv(hcd);
	ohci = hcd_to_ohci(hcd);

	priv->phy = devm_phy_get(&dev->dev, "usb");
	if (IS_ERR(priv->phy)) {
		err = PTR_ERR(priv->phy);
		goto err_put_hcd;
	}

	for (clk = 0; clk < USB_MAX_CLKS; clk++) {
		priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
		if (IS_ERR(priv->clks[clk])) {
			err = PTR_ERR(priv->clks[clk]);
			if (err == -EPROBE_DEFER)
				goto err_put_clks;
			priv->clks[clk] = NULL;
			break;
		}
	}

	/* some SoCs don't have a dedicated 48Mhz clock, but those that
	   do need the rate to be explicitly set */
	priv->clk48 = devm_clk_get(&dev->dev, "clk48");
	if (IS_ERR(priv->clk48)) {
		dev_info(&dev->dev, "48MHz clk not found\n");
		priv->clk48 = NULL;
	}

	priv->pwr = devm_reset_control_get_optional(&dev->dev, "power");
	if (IS_ERR(priv->pwr)) {
		err = PTR_ERR(priv->pwr);
		goto err_put_clks;
	}

	priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset");
	if (IS_ERR(priv->rst)) {
		err = PTR_ERR(priv->rst);
		goto err_put_clks;
	}

	if (pdata->power_on) {
		err = pdata->power_on(dev);
		if (err < 0)
			goto err_power;
	}

	hcd->rsrc_start = res_mem->start;
	hcd->rsrc_len = resource_size(res_mem);

	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
	if (IS_ERR(hcd->regs)) {
		err = PTR_ERR(hcd->regs);
		goto err_power;
	}
	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
	if (err)
		goto err_power;

	device_wakeup_enable(hcd->self.controller);

	platform_set_drvdata(dev, hcd);

	return err;

err_power:
	if (pdata->power_off)
		pdata->power_off(dev);

err_put_clks:
//.........这里部分代码省略.........

static int ux500_probe(struct platform_device *pdev)
{
	struct resource musb_resources[2];
	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
	struct device_node		*np = pdev->dev.of_node;
	struct platform_device		*musb;
	struct ux500_glue		*glue;
	struct clk			*clk;
	int				ret = -ENOMEM;

	if (!pdata) {
		if (np) {
			pdata = ux500_of_probe(pdev, np);
			if (!pdata)
				goto err0;

			pdev->dev.platform_data = pdata;
		} else {
			dev_err(&pdev->dev, "no pdata or device tree found\n");
			goto err0;
		}
	}

	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
	if (!glue)
		goto err0;

	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
	if (!musb) {
		dev_err(&pdev->dev, "failed to allocate musb device\n");
		goto err0;
	}

	clk = devm_clk_get(&pdev->dev, NULL);
	if (IS_ERR(clk)) {
		dev_err(&pdev->dev, "failed to get clock\n");
		ret = PTR_ERR(clk);
		goto err1;
	}

	ret = clk_prepare_enable(clk);
	if (ret) {
		dev_err(&pdev->dev, "failed to enable clock\n");
		goto err1;
	}

	musb->dev.parent		= &pdev->dev;
	musb->dev.dma_mask		= &pdev->dev.coherent_dma_mask;
	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;

	glue->dev			= &pdev->dev;
	glue->musb			= musb;
	glue->clk			= clk;

	pdata->platform_ops		= &ux500_ops;
	pdata->config 			= &ux500_musb_hdrc_config;

	platform_set_drvdata(pdev, glue);

	memset(musb_resources, 0x00, sizeof(*musb_resources) *
			ARRAY_SIZE(musb_resources));

	musb_resources[0].name = pdev->resource[0].name;
	musb_resources[0].start = pdev->resource[0].start;
	musb_resources[0].end = pdev->resource[0].end;
	musb_resources[0].flags = pdev->resource[0].flags;

	musb_resources[1].name = pdev->resource[1].name;
	musb_resources[1].start = pdev->resource[1].start;
	musb_resources[1].end = pdev->resource[1].end;
	musb_resources[1].flags = pdev->resource[1].flags;

	ret = platform_device_add_resources(musb, musb_resources,
			ARRAY_SIZE(musb_resources));
	if (ret) {
		dev_err(&pdev->dev, "failed to add resources\n");
		goto err2;
	}

	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
	if (ret) {
		dev_err(&pdev->dev, "failed to add platform_data\n");
		goto err2;
	}

	ret = platform_device_add(musb);
	if (ret) {
		dev_err(&pdev->dev, "failed to register musb device\n");
		goto err2;
	}

	return 0;

err2:
	clk_disable_unprepare(clk);

err1:
	platform_device_put(musb);

err0:
//.........这里部分代码省略.........

static int s3c2410wdt_probe(struct platform_device *pdev)
{
	struct device *dev;
	unsigned int wtcon;
	int started = 0;
	int ret;

	DBG("%s: probe=%p\n", __func__, pdev);

	dev = &pdev->dev;
	wdt_dev = &pdev->dev;

	wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (wdt_mem == NULL) {
		dev_err(dev, "no memory resource specified\n");
		return -ENOENT;
	}

	wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
	if (wdt_irq == NULL) {
		dev_err(dev, "no irq resource specified\n");
		ret = -ENOENT;
		goto err;
	}

	/* get the memory region for the watchdog timer */
	wdt_base = devm_ioremap_resource(dev, wdt_mem);
	if (IS_ERR(wdt_base)) {
		ret = PTR_ERR(wdt_base);
		goto err;
	}

	DBG("probe: mapped wdt_base=%p\n", wdt_base);

	wdt_clock = devm_clk_get(dev, "watchdog");
	if (IS_ERR(wdt_clock)) {
		dev_err(dev, "failed to find watchdog clock source\n");
		ret = PTR_ERR(wdt_clock);
		goto err;
	}

	clk_prepare_enable(wdt_clock);

	ret = s3c2410wdt_cpufreq_register();
	if (ret < 0) {
		pr_err("failed to register cpufreq\n");
		goto err_clk;
	}

	/* see if we can actually set the requested timer margin, and if
	 * not, try the default value */

	watchdog_init_timeout(&s3c2410_wdd, tmr_margin,  &pdev->dev);
	if (s3c2410wdt_set_heartbeat(&s3c2410_wdd, s3c2410_wdd.timeout)) {
		started = s3c2410wdt_set_heartbeat(&s3c2410_wdd,
					CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);

		if (started == 0)
			dev_info(dev,
			   "tmr_margin value out of range, default %d used\n",
			       CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
		else
			dev_info(dev, "default timer value is out of range, "
							"cannot start\n");
	}

	ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0,
				pdev->name, pdev);
	if (ret != 0) {
		dev_err(dev, "failed to install irq (%d)\n", ret);
		goto err_cpufreq;
	}

	watchdog_set_nowayout(&s3c2410_wdd, nowayout);

	ret = watchdog_register_device(&s3c2410_wdd);
	if (ret) {
		dev_err(dev, "cannot register watchdog (%d)\n", ret);
		goto err_cpufreq;
	}

	if (tmr_atboot && started == 0) {
		dev_info(dev, "starting watchdog timer\n");
		s3c2410wdt_start(&s3c2410_wdd);
	} else if (!tmr_atboot) {
		/* if we're not enabling the watchdog, then ensure it is
		 * disabled if it has been left running from the bootloader
		 * or other source */

		s3c2410wdt_stop(&s3c2410_wdd);
	}

	/* print out a statement of readiness */

	wtcon = readl(wdt_base + S3C2410_WTCON);

	dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
		 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
		 (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
		 (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
//.........这里部分代码省略.........

static int nop_usb_xceiv_probe(struct platform_device *pdev)
{
    struct device *dev = &pdev->dev;
    struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data;
    struct nop_usb_xceiv	*nop;
    enum usb_phy_type	type = USB_PHY_TYPE_USB2;
    int err;
    u32 clk_rate = 0;
    bool needs_vcc = false;
    bool needs_reset = false;

    nop = devm_kzalloc(&pdev->dev, sizeof(*nop), GFP_KERNEL);
    if (!nop)
        return -ENOMEM;

    nop->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*nop->phy.otg),
                                GFP_KERNEL);
    if (!nop->phy.otg)
        return -ENOMEM;

    if (dev->of_node) {
        struct device_node *node = dev->of_node;

        if (of_property_read_u32(node, "clock-frequency", &clk_rate))
            clk_rate = 0;

        needs_vcc = of_property_read_bool(node, "vcc-supply");
        needs_reset = of_property_read_bool(node, "reset-supply");

    } else if (pdata) {
        type = pdata->type;
        clk_rate = pdata->clk_rate;
        needs_vcc = pdata->needs_vcc;
        needs_reset = pdata->needs_reset;
    }

    nop->clk = devm_clk_get(&pdev->dev, "main_clk");
    if (IS_ERR(nop->clk)) {
        dev_dbg(&pdev->dev, "Can't get phy clock: %ld\n",
                PTR_ERR(nop->clk));
    }

    if (!IS_ERR(nop->clk) && clk_rate) {
        err = clk_set_rate(nop->clk, clk_rate);
        if (err) {
            dev_err(&pdev->dev, "Error setting clock rate\n");
            return err;
        }
    }

    if (!IS_ERR(nop->clk)) {
        err = clk_prepare(nop->clk);
        if (err) {
            dev_err(&pdev->dev, "Error preparing clock\n");
            return err;
        }
    }

    nop->vcc = devm_regulator_get(&pdev->dev, "vcc");
    if (IS_ERR(nop->vcc)) {
        dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n",
                PTR_ERR(nop->vcc));
        if (needs_vcc)
            return -EPROBE_DEFER;
    }

    nop->reset = devm_regulator_get(&pdev->dev, "reset");
    if (IS_ERR(nop->reset)) {
        dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n",
                PTR_ERR(nop->reset));
        if (needs_reset)
            return -EPROBE_DEFER;
    }

    nop->dev		= &pdev->dev;
    nop->phy.dev		= nop->dev;
    nop->phy.label		= "nop-xceiv";
    nop->phy.set_suspend	= nop_set_suspend;
    nop->phy.init		= nop_init;
    nop->phy.shutdown	= nop_shutdown;
    nop->phy.state		= OTG_STATE_UNDEFINED;
    nop->phy.type		= type;

    nop->phy.otg->phy		= &nop->phy;
    nop->phy.otg->set_host		= nop_set_host;
    nop->phy.otg->set_peripheral	= nop_set_peripheral;

    err = usb_add_phy_dev(&nop->phy);
    if (err) {
        dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
                err);
        goto err_add;
    }

    platform_set_drvdata(pdev, nop);

    return 0;

err_add:
    if (!IS_ERR(nop->clk))
//.........这里部分代码省略.........