C++ dev_close函数代码示例

static int _dev_read_ahead_dev(struct device *dev, uint32_t *read_ahead)
{
	long read_ahead_long;

	if (dev->read_ahead != -1) {
		*read_ahead = (uint32_t) dev->read_ahead;
		return 1;
	}

	if (!dev_open(dev))
		return_0;

	if (ioctl(dev->fd, BLKRAGET, &read_ahead_long) < 0) {
		log_sys_error("ioctl BLKRAGET", dev_name(dev));
		if (!dev_close(dev))
			stack;
		return 0;
	}

	if (!dev_close(dev))
		stack;

	*read_ahead = (uint32_t) read_ahead_long;
	dev->read_ahead = read_ahead_long;

	log_very_verbose("%s: read_ahead is %u sectors",
			 dev_name(dev), *read_ahead);

	return 1;
}

static int _dev_discard_blocks(struct device *dev, uint64_t offset_bytes, uint64_t size_bytes)
{
	uint64_t discard_range[2];

	if (!dev_open(dev))
		return_0;

	discard_range[0] = offset_bytes;
	discard_range[1] = size_bytes;

	log_debug_devs("Discarding %" PRIu64 " bytes offset %" PRIu64 " bytes on %s.",
		       size_bytes, offset_bytes, dev_name(dev));
	if (ioctl(dev->fd, BLKDISCARD, &discard_range) < 0) {
		log_error("%s: BLKDISCARD ioctl at offset %" PRIu64 " size %" PRIu64 " failed: %s.",
			  dev_name(dev), offset_bytes, size_bytes, strerror(errno));
		if (!dev_close(dev))
			stack;
		/* It doesn't matter if discard failed, so return success. */
		return 1;
	}

	if (!dev_close(dev))
		stack;

	return 1;
}

void start(void)
{	
	uint16_t count;
	uint8_t index;

	buffer = (char *)mos_mem_alloc((uint16_t)BUFFER_SIZE);
	memset(buffer, 'X', BUFFER_SIZE);

	/* For safety, erase entire FLASH */
	dev_ioctl(DEV_TELOS_FLASH, TELOS_FLASH_BULK_ERASE);

	/* Turn on the FLASH */
	dev_mode(DEV_TELOS_FLASH, DEV_MODE_ON);
	
	/* Acquire lock on FLASH and preliminarly 
	 * write 64 bits of data */
	dev_open(DEV_TELOS_FLASH);
	count = dev_write(DEV_TELOS_FLASH, "abcdefgh", 8);
	printf("%d bytes of data have been written to FLASH memory\n", count);
	dev_close(DEV_TELOS_FLASH);

			/* Perform experiments over R/W pointer to FLASH */	

	/* Experiment#1 - flash is on, lock is free; aquire lock and read 
	 *                without using any SEEK function */
	dev_open(DEV_TELOS_FLASH);
	count = dev_read(DEV_TELOS_FLASH, buffer, 1);
	printf("#1 : %c has been read from FLASH memory\n", buffer[0]);	
	dev_close(DEV_TELOS_FLASH);

	/* Move pointer */
	dev_open(DEV_TELOS_FLASH);
	dev_ioctl(DEV_TELOS_FLASH, DEV_SEEK, 3);
	dev_close(DEV_TELOS_FLASH);	

	/* Experiment#2 - flash is on, lock is free; aquire lock, read single data, 
	 * write single data and read multiple data from it */
	dev_open(DEV_TELOS_FLASH);
	dev_read(DEV_TELOS_FLASH, buffer, 1);
	printf("#2 : %c has been read\n"
		   "   : FLASH memory written\n", buffer[0]);
	dev_write(DEV_TELOS_FLASH, "l", 1);	
	count =	dev_read(DEV_TELOS_FLASH, buffer, 1);
	printf("   : %d bytes have been read from FLASH memory: ", count);
	for(index = 0; index < count; index++)
	{
		printf("%c ", buffer[index]);
	}
	printf("\n");
	dev_close(DEV_TELOS_FLASH);

	/* Release lock and free resources */
	dev_close(DEV_TELOS_FLASH);
	dev_mode(DEV_TELOS_FLASH, DEV_MODE_OFF);
	mos_mem_free(buffer);

	return;
}

/* TODO: Use sr_dev_inst to store connection handle & use std_dev_clear(). */
static int dev_clear(void)
{
	GSList *l;
	struct sr_dev_inst *sdi;
	struct drv_context *drvc;
	struct dev_context *devc;
	int ret = SR_OK;

	if (!(drvc = di->priv))
		return SR_OK;

	/* Properly close and free all devices. */
	for (l = drvc->instances; l; l = l->next) {
		if (!(sdi = l->data)) {
			/* Log error, but continue cleaning up the rest. */
			sr_err("%s: sdi was NULL, continuing", __func__);
			ret = SR_ERR_BUG;
			continue;
		}
		if (!(devc = sdi->priv)) {
			/* Log error, but continue cleaning up the rest. */
			sr_err("%s: sdi->priv was NULL, continuing", __func__);
			ret = SR_ERR_BUG;
			continue;
		}
		dev_close(sdi);
		sr_serial_dev_inst_free(devc->serial);
		sr_dev_inst_free(sdi);
	}
	g_slist_free(drvc->instances);
	drvc->instances = NULL;

	return ret;
}

int config_file_read(struct dm_config_tree *cft)
{
	const char *filename = NULL;
	struct config_file *cf = dm_config_get_custom(cft);
	struct stat info;
	int r;

	if (!config_file_check(cft, &filename, &info))
		return_0;

	/* Nothing to do.  E.g. empty file. */
	if (!filename)
		return 1;

	if (!cf->dev) {
		if (!(cf->dev = dev_create_file(filename, NULL, NULL, 1)))
			return_0;

		if (!dev_open_readonly_buffered(cf->dev))
			return_0;
	}

	r = config_file_read_fd(cft, cf->dev, 0, (size_t) info.st_size, 0, 0,
				(checksum_fn_t) NULL, 0);

	if (!cf->keep_open) {
		if (!dev_close(cf->dev))
			stack;
		cf->dev = NULL;
	}

	return r;
}

a_status_t
__adf_net_dev_close(adf_net_handle_t hdl)
{
    dev_close(hdl_to_netdev(hdl));
    
    return A_STATUS_OK;
}

/* FIXME Avoid repeated re-reading if cache lock held */
int label_read(struct device *dev, struct label **result,
                uint64_t scan_sector)
{
#pragma pack(8)
        char buf[LABEL_SIZE]; //__attribute((aligned(8)));
#pragma pack()
        struct labeller *l;
        uint64_t sector;
        struct lvmcache_info *info;
        int r = 0;

        if (!dev_open(dev)) {
                stack;

                if ((info = info_from_pvid(dev->pvid)))
                        lvmcache_update_vgname_and_id(info, ORPHAN, ORPHAN,
                                                      0, NULL);

                return r;
        }

        if (!(l = _find_labeller(dev, buf, &sector, scan_sector)))
                goto_out;

        if ((r = (l->ops->read)(l, dev, buf, result)) && result && *result)
                (*result)->sector = sector;

      out:
        if (!dev_close(dev))
                stack;

        return r;
}

static int _native_check_pv_min_size(struct device *dev)
{
	uint64_t size;
	int ret = 0;

	/* Check it's accessible */
	if (!dev_open_readonly_quiet(dev)) {
		log_debug_devs("%s: Skipping: open failed", dev_name(dev));
		return 0;
	}

	/* Check it's not too small */
	if (!dev_get_size(dev, &size)) {
		log_debug_devs("%s: Skipping: dev_get_size failed", dev_name(dev));
		goto out;
	}

	if (size < pv_min_size()) {
		log_debug_devs("%s: Skipping: %s", dev_name(dev),
				_too_small_to_hold_pv_msg);
		goto out;
	}

	ret = 1;
out:
	if (!dev_close(dev))
		stack;

	return ret;
}

static void cmd_model_new_end(char *file)
{
	//printf("reached cmd_model_new_end\n");
	//fflush(stdout);
	//hmm_print_3d(&hmm);
	//printf("state len: %d\n", hmm.state_len);
	//printf("wrote HMM\n");
	//fflush(stdout);
	hmm_write_3d(&hmm, file);
	printf("Done.\n");
	fflush(stdout);
	if (g_mode == graphical) {
		percentage += 0.2;
		update_gui("Done creating gesture", percentage);
	}

	if (g_mode == graphical) {
		dev_close(g_dev);
		//pthread_exit(0); /* don't exit, as we probably going to train the gesture */
	} else {
		kill(getpid(), SIGTERM);
	}

	gauss_mix_delete_3d(&endpoint.each[0]);
	gauss_mix_delete_3d(&endpoint.each[1]);
	hmm_delete_3d(&hmm);
	
	seq.index = 0;
	detected = 0;
	seq.till_end = FRAME_AFTER;
	seq.begin = 0;
	seq.end = 0;
}

static void cmd_model_train_end(char *file)
{
	//printf("reached cmd_model_train_end\n");
	//fflush(stdout);
	hmm_write_3d(&hmm, file);
	printf("Done.\n");
	fflush(stdout);
	if (g_mode == graphical) {
		percentage += 0.2;
		update_gui("Done training gesture", percentage);
	}
	
	if (g_mode == graphical) {
		dev_close(g_dev);
		//pthread_exit(0);
	} else {
		kill(getpid(), SIGTERM);
	}

	gauss_mix_delete_3d(&endpoint.each[0]);
	gauss_mix_delete_3d(&endpoint.each[1]);
	hmm_delete_3d(&hmm);
	
	seq.index = 0;
	detected = 0;
	seq.till_end = FRAME_AFTER;
	seq.begin = 0;
	seq.end = 0;
}

int DeviceV4L2Base::open_dev(int color_model)
{
	v4l2_lock->lock("DeviceV4L2Base::open_dev");
	int result = 0;
	if( !opened )
	{
		result = dev_open();
		if( !result )
			result = v4l2_open(color_model);
		if( !result )
			result = start_dev();
		if( !result )
		{
			qbfrs_lock->reset();
			video_lock->reset();
			getq = new DeviceV4L2BufferQ(total_buffers+1);
			put_thread = new DeviceV4L2Put(this);
			put_thread->start();
			done = 0;
			Thread::start();
		}
		else
			printf("DeviceV4L2Base::open_dev failed\n");
	}
	if( result )
	{
		printf("DeviceV4L2Base::open_dev: adaptor open failed\n");
		stop_dev();
		dev_close();
	}
	else
		opened = 1;
	v4l2_lock->unlock();
	return result;
}

static void ipmr_del_tunnel(struct net_device *dev, struct vifctl *v)
{
	struct net *net = dev_net(dev);

	dev_close(dev);

	dev = __dev_get_by_name(net, "tunl0");
	if (dev) {
		const struct net_device_ops *ops = dev->netdev_ops;
		struct ifreq ifr;
		struct ip_tunnel_parm p;

		memset(&p, 0, sizeof(p));
		p.iph.daddr = v->vifc_rmt_addr.s_addr;
		p.iph.saddr = v->vifc_lcl_addr.s_addr;
		p.iph.version = 4;
		p.iph.ihl = 5;
		p.iph.protocol = IPPROTO_IPIP;
		sprintf(p.name, "dvmrp%d", v->vifc_vifi);
		ifr.ifr_ifru.ifru_data = (__force void __user *)&p;

		if (ops->ndo_do_ioctl) {
			mm_segment_t oldfs = get_fs();

			set_fs(KERNEL_DS);
			ops->ndo_do_ioctl(dev, &ifr, SIOCDELTUNNEL);
			set_fs(oldfs);
		}
	}
}

void install_drivers() {
  dev_t console;

  // Register /proc/units
  register_proc_inode("units", units_proc, NULL);
  register_proc_inode("devices", devices_proc, NULL);
  register_proc_inode("devstat", devstat_proc, NULL);

  // Parse driver binding database
  parse_bindings();

  // Match bindings to units
  bind_units();

  // Install legacy drivers
  install_legacy_drivers();

  // Make sure we have a console device
  console = dev_open("console");
  if (console == NODEV) {
    initialize_driver(NULL, "krnl.dll!console");
  } else {
    dev_close(console);
  }
}

/* Unused */
int label_verify(struct device *dev)
{
#pragma pack(8)
        char buf[LABEL_SIZE];
#pragma pack()
        struct labeller *l;
        //char buf[LABEL_SIZE] __attribute((aligned(8)));
        uint64_t sector;
        struct lvmcache_info *info;
        int r = 0;

        if (!dev_open(dev)) {
                if ((info = info_from_pvid(dev->pvid)))
                        lvmcache_update_vgname_and_id(info, ORPHAN, ORPHAN,
                                                      0, NULL);

                return_0;
        }

        if (!(l = _find_labeller(dev, buf, &sector, UINT64_C(0))))
                goto_out;

        r = l->ops->verify ? l->ops->verify(l, buf, sector) : 1;

      out:
        if (!dev_close(dev))
                stack;

        return r;
}

error_t
trivfs_goaway (struct trivfs_control *fsys, int flags)
{
  struct dev *const device = fsys->hook;
  error_t err;
  int force = (flags & FSYS_GOAWAY_FORCE);
  int nosync = (flags & FSYS_GOAWAY_NOSYNC);
  struct port_class *root_port_class = fsys->protid_class;

  mutex_lock (&device->lock);

  if (device->store == NULL)
    /* The device is not actually open.
       XXX note that exitting here nukes non-io users, like someone
       in the middle of a stat who will get SIGLOST or something.  */
    exit (0);

  /* Wait until all pending rpcs are done.  */
  err = ports_inhibit_class_rpcs (root_port_class);
  if (err == EINTR || (err && !force))
    {
      mutex_unlock (&device->lock);
      return err;
    }

  if (force && nosync)
    /* Exit with extreme prejudice.  */
    exit (0);

  if (!force && ports_count_class (root_port_class) > 0)
    /* Still users, so don't exit.  */
    goto busy;

  if (! nosync)
    /* Sync the device here, if necessary, so that closing it won't result in
       any I/O (which could get hung up trying to use one of our pagers).  */
    dev_sync (device, 1);

  /* devpager_shutdown may sync the pagers as side-effect (if NOSYNC is 0),
     so we put that first in this test.  */
  if (dev_stop_paging (device, nosync) || force)
    /* Bye-bye.  */
    {
      if (! nosync)
	/* If NOSYNC is true, we don't close DEV, as that could cause data to
	   be written back.  */
	dev_close (device);
      exit (0);
    }

 busy:
  /* Allow normal operations to proceed.  */
  ports_enable_class (root_port_class);
  ports_resume_class_rpcs (root_port_class);
  mutex_unlock (&device->lock);

  /* Complain that there are still users.  */
  return EBUSY;
}