当前位置: 首页>>代码示例>>C++>>正文

C++ cr_assert_eq函数代码示例

本文整理汇总了C++中cr_assert_eq函数的典型用法代码示例。如果您正苦于以下问题：C++ cr_assert_eq函数的具体用法？C++ cr_assert_eq怎么用？C++ cr_assert_eq使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了cr_assert_eq函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: sep_atomic_rw

void sep_atomic_rw(int index)
{
	int ret;
	ssize_t sz;
	struct fi_cq_tagged_entry cqe = { (void *) -1, UINT_MAX, UINT_MAX,
					  (void *) -1, UINT_MAX, UINT_MAX };
	uint64_t operand = SOURCE_DATA;
	uint64_t w[NUMEPS] = {0}, r[NUMEPS] = {0}, w_e[NUMEPS] = {0};
	uint64_t r_e[NUMEPS] = {0};

	/* u64 */
	*((uint64_t *)source) = FETCH_SOURCE_DATA;
	*((uint64_t *)target) = TARGET_DATA;
	sz = fi_fetch_atomic(tx_ep[0][index], &operand, 1, NULL, source,
			     loc_mr[0], rx_addr[index], (uint64_t)target,
			     mr_key[1], FI_UINT64, FI_SUM, target);
	cr_assert_eq(sz, 0);

	while ((ret = fi_cq_read(tx_cq[0][index], &cqe, 1)) == -FI_EAGAIN) {
		pthread_yield();
	}

	cr_assert_eq(ret, 1);
	sep_check_tcqe(&cqe, target, FI_ATOMIC | FI_READ, 0);

	r[0] = 1;
	sep_check_cntrs(w, r, w_e, r_e);
	ret = *((uint64_t *)target) == (SOURCE_DATA + TARGET_DATA);
	cr_assert(ret, "Data mismatch");
	ret = *((uint64_t *)source) == TARGET_DATA;
	cr_assert(ret, "Fetch data mismatch");
}
开发者ID:francois-wellenreiter，项目名称:libfabric，代码行数:32，代码来源:sep.c

示例2: do_writedata

void do_writedata(int len)
{
	int ret;
	ssize_t sz;
	struct fi_cq_tagged_entry cqe, dcqe;

#define WRITE_DATA 0x5123da1a145
	init_data(source, len, 0x23);
	init_data(target, len, 0);
	sz = fi_writedata(ep[0], source, len, loc_mr, WRITE_DATA,
			 gni_addr[1], (uint64_t)target, mr_key,
			 target);
	cr_assert_eq(sz, 0);

	while ((ret = fi_cq_read(send_cq, &cqe, 1)) == -FI_EAGAIN) {
		pthread_yield();
	}

	cr_assert_eq(ret, 1);
	rdm_rma_check_tcqe(&cqe, target, FI_RMA | FI_WRITE, 0);
	rdm_rma_check_cntrs(1, 0, 0, 0);

	dbg_printf("got write context event!\n");

	cr_assert(check_data(source, target, len), "Data mismatch");

	while ((ret = fi_cq_read(recv_cq, &dcqe, 1)) == -FI_EAGAIN) {
		pthread_yield();
	}
	cr_assert(ret != FI_SUCCESS, "Missing remote data");

	rdm_rma_check_tcqe(&dcqe, NULL,
			   (FI_RMA | FI_REMOTE_WRITE | FI_REMOTE_CQ_DATA),
			   WRITE_DATA);
}
开发者ID:RajKamal2013，项目名称:libfabric，代码行数:35，代码来源:rdm_rma.c

示例3: cm_basic_send

void cm_basic_send(void)
{
	int ret;
	int source_done = 0, dest_done = 0;
	struct fi_cq_tagged_entry cqe;
	ssize_t sz;
	uint64_t source = 0xa4321234a4321234,
		 target = 0xb5678901b5678901;

	sz = fi_send(cli_ep, &source, 8, 0, 0, &target);
	cr_assert_eq(sz, 0);

	sz = fi_recv(srv_ep, &target, 8, 0, 0, &source);
	cr_assert_eq(sz, 0);

	/* need to progress both CQs simultaneously for rendezvous */
	do {
		ret = fi_cq_read(cli_cq, &cqe, 1);
		if (ret == 1) {
			cr_assert_eq(cqe.op_context, &target);
			source_done = 1;
		}

		ret = fi_cq_read(srv_cq, &cqe, 1);
		if (ret == 1) {
			cr_assert_eq(cqe.op_context, &source);
			dest_done = 1;
		}
	} while (!source_done || !dest_done);

	cr_assert_eq(source, target);
	dbg_printf("Basic send/recv complete! (0x%lx, 0x%lx)\n",
		   source, target);
}
开发者ID:jeffhammond，项目名称:libfabric，代码行数:34，代码来源:cm.c

示例4: sep_writev

void sep_writev(int index, int len)
{
	int ret;
	ssize_t sz;
	struct fi_cq_tagged_entry cqe = { (void *) -1, UINT_MAX, UINT_MAX,
					  (void *) -1, UINT_MAX, UINT_MAX };
	struct iovec iov;
	uint64_t w[2] = {0}, r[2] = {0}, w_e[2] = {0}, r_e[2] = {0};

	iov.iov_base = source;
	iov.iov_len = len;

	sep_init_data(source, len, 0x25 + index);
	sep_init_data(target, len, 0);

	sz = fi_writev(tx_ep[0][index], &iov, (void **)loc_mr, 1,
		       gni_addr[1], (uint64_t)target, mr_key[1],
		       target);
	cr_assert_eq(sz, 0);

	while ((ret = fi_cq_read(tx_cq[0][index], &cqe, 1)) == -FI_EAGAIN) {
		pthread_yield();
	}

	cr_assert_eq(ret, 1);
	sep_check_tcqe(&cqe, target, FI_RMA | FI_WRITE, 0);

	w[0] = 1;
	sep_check_cntrs(w, r, w_e, r_e);
	cr_assert(sep_check_data(source, target, len), "Data mismatch");
}
开发者ID:francois-wellenreiter，项目名称:libfabric，代码行数:31，代码来源:sep.c

示例5: Test

Test(gnix_freelist, freelist_zero_refill_test)
{
	struct gnix_freelist fl;
	int i, ret;
	const int num_elems = 71;
	struct dlist_entry *elems[num_elems + 1];
	const int refill_size = 0;

	/* non-optimized code may not zero structures */
	memset(&fl, 0x0, sizeof(struct gnix_freelist));

	ret = _gnix_fl_init(sizeof(struct dlist_entry), 0,
			    num_elems, refill_size, 0, 0, &fl);
	cr_assert_eq(ret, FI_SUCCESS, "Failed to initialize freelist");

	for (i = 0; i < num_elems; i++) {
		ret = _gnix_fl_alloc(&elems[i], &fl);
		cr_assert_eq(ret, FI_SUCCESS, "Failed to obtain dlist_entry");
	}

	cr_assert(_gnix_fl_empty(&fl), "Freelist not empty");

	ret = _gnix_fl_alloc(&elems[num_elems], &fl);
	cr_assert_eq(ret, -FI_ECANCELED, "Unexpected return code from "
                 "_gnix_fl_alloc");

	for (i = num_elems-1; i >= 0 ; i--)
		_gnix_fl_free(elems[i], &fl);

	_gnix_fl_destroy(&fl);
}
开发者ID:ParaStation，项目名称:psmpi2，代码行数:31，代码来源:freelist.c

示例6: sep_read

void sep_read(int index, int len)
{
	int ret;
	ssize_t sz;
	struct fi_cq_tagged_entry cqe = { (void *) -1, UINT_MAX, UINT_MAX,
					  (void *) -1, UINT_MAX, UINT_MAX };
	uint64_t w[2] = {0}, r[2] = {0}, w_e[2] = {0}, r_e[2] = {0};

#define READ_CTX 0x4e3dda1aULL
	sep_init_data(source, len, 0);
	sep_init_data(target, len, 0xad);

	sz = fi_read(tx_ep[0][index], source, len,
		     loc_mr[0], rx_addr[index], (uint64_t)target, mr_key[1],
		     (void *)READ_CTX);
	cr_assert_eq(sz, 0);

	while ((ret = fi_cq_read(tx_cq[0][index], &cqe, 1)) == -FI_EAGAIN) {
		pthread_yield();
	}

	cr_assert_eq(ret, 1);
	sep_check_tcqe(&cqe, (void *)READ_CTX, FI_RMA | FI_READ, 0);

	r[0] = 1;
	sep_check_cntrs(w, r, w_e, r_e);
	cr_assert(sep_check_data(source, target, len), "Data mismatch");
}
开发者ID:francois-wellenreiter，项目名称:libfabric，代码行数:28，代码来源:sep.c

示例7: Test

Test(vc_management_auto, vc_alloc_simple)
{
	int ret;
	struct gnix_vc *vc[2];
	struct gnix_fid_ep *ep_priv;

	ep_priv = container_of(ep[0], struct gnix_fid_ep, ep_fid);

	ret = _gnix_vc_alloc(ep_priv, gnix_addr[0], &vc[0]);
	cr_assert_eq(ret, FI_SUCCESS);

	ret = _gnix_vc_alloc(ep_priv, gnix_addr[1], &vc[1]);
	cr_assert_eq(ret, FI_SUCCESS);

	/*
	 * vc_id's have to be different since the
	 * vc's were allocated using the same ep.
	 */
	cr_assert_neq(vc[0]->vc_id, vc[1]->vc_id);

	ret = _gnix_vc_destroy(vc[0]);
	cr_assert_eq(ret, FI_SUCCESS);

	ret = _gnix_vc_destroy(vc[1]);
	cr_assert_eq(ret, FI_SUCCESS);
}
开发者ID:agontarek，项目名称:libfabric，代码行数:26，代码来源:vc.c

示例8: lookup_test

static void lookup_test(void)
{
	int ret;
	int i;
	fi_addr_t addresses[SIMPLE_ADDR_COUNT];
	fi_addr_t *compare;
	struct gnix_ep_name found;
	size_t addrlen = sizeof(struct gnix_ep_name);

	/* insert addresses */
	ret = fi_av_insert(av, (void *) simple_ep_names, SIMPLE_ADDR_COUNT,
			addresses, 0, NULL);
	cr_assert_eq(ret, SIMPLE_ADDR_COUNT);

	/* check address contents */
	for (i = 0; i < SIMPLE_ADDR_COUNT; i++) {
		if (gnix_av->type == FI_AV_MAP) {
			compare = (fi_addr_t *) &simple_ep_names[i].gnix_addr;
			cr_assert_eq(*compare, addresses[i]);
		} else {
			cr_assert_eq(i, addresses[i]);
		}
	}

	for (i = 0; i < SIMPLE_ADDR_COUNT; i++) {
		ret = fi_av_lookup(av, addresses[i], &found, &addrlen);
		cr_assert_eq(ret, FI_SUCCESS);
	}
}
开发者ID:biddisco，项目名称:libfabric，代码行数:29，代码来源:av.c

示例9: rdm_sr_setup_common

void rdm_sr_setup_common(void)
{
	int ret = 0, i = 0;

	rdm_sr_setup_common_eps();

	for (i = 0; i < NUMEPS; i++) {
		ret = fi_mr_reg(dom[i], target, 3 * BUF_SZ,
				FI_REMOTE_WRITE, 0, 0, 0, rem_mr + i, &target);
		cr_assert_eq(ret, 0);

		ret = fi_mr_reg(dom[i], source, BUF_SZ,
				FI_REMOTE_WRITE, 0, 0, 0, loc_mr + i, &source);
		cr_assert_eq(ret, 0);

		ret = fi_mr_reg(dom[i], iov_dest_buf, IOV_CNT * BUF_SZ,
				FI_REMOTE_WRITE, 0, 0, 0, iov_dest_buf_mr + i,
				&iov_dest_buf);
		cr_assert_eq(ret, 0);

		ret = fi_mr_reg(dom[i], iov_src_buf, IOV_CNT * BUF_SZ,
				FI_REMOTE_WRITE, 0, 0, 0, iov_src_buf_mr + i,
				&iov_src_buf);
		cr_assert_eq(ret, 0);

		mr_key[i] = fi_mr_key(rem_mr[i]);
		iov_dest_buf_mr_key[i] = fi_mr_key(iov_dest_buf_mr[i]);
	}
}
开发者ID:tonyzinger，项目名称:libfabric-cray，代码行数:29，代码来源:rdm_sr.c

示例10: do_multirecv

void do_multirecv(int len)
{
	int i, ret;
	ssize_t sz;
	struct fi_cq_tagged_entry s_cqe, d_cqe;
	struct iovec iov;
	struct fi_msg msg;
	uint64_t s[NUMEPS] = {0}, r[NUMEPS] = {0}, s_e[NUMEPS] = {0};
	uint64_t r_e[NUMEPS] = {0};
	uint64_t flags;
	int nrecvs = 3;

	rdm_sr_init_data(source, len, 0xab);
	rdm_sr_init_data(target, len, 0);

	/* Post receives first to force matching in SMSG callback. */
	iov.iov_base = target;
	iov.iov_len = len * nrecvs + 63;

	msg.msg_iov = &iov;
	msg.desc = (void **)rem_mr;
	msg.iov_count = 1;
	msg.addr = gni_addr[0];
	msg.context = source;
	msg.data = (uint64_t)source;

	sz = fi_recvmsg(ep[1], &msg, FI_MULTI_RECV);
	cr_assert_eq(sz, 0);

	for (i = 0; i < nrecvs; i++) {
		sz = fi_send(ep[0], source, len, loc_mr[0], gni_addr[1],
			     target);
		cr_assert_eq(sz, 0);
	}

	/* need to progress both CQs simultaneously for rendezvous */
	do {
		ret = fi_cq_read(msg_cq[0], &s_cqe, 1);
		if (ret == 1) {
			rdm_sr_check_cqe(&s_cqe, target, (FI_MSG|FI_SEND),
					 0, 0, 0, false);
			s[0]++;
		}
		ret = fi_cq_read(msg_cq[1], &d_cqe, 1);
		flags = (r[1] < (nrecvs -1 )) ? FI_MSG | FI_RECV :
				FI_MSG | FI_RECV | FI_MULTI_RECV;
		if (ret == 1) {
			rdm_sr_check_cqe(&d_cqe, source,
					 flags,
					 target + (r[1] * len), len, 0, true);
			cr_assert(rdm_sr_check_data(source, d_cqe.buf, len),
				  "Data mismatch");
			r[1]++;
		}
	} while (s[0] < nrecvs || r[1] < nrecvs);

	rdm_sr_check_cntrs(s, r, s_e, r_e);

	dbg_printf("got context events!\n");
}
开发者ID:tonyzinger，项目名称:libfabric-cray，代码行数:60，代码来源:rdm_sr.c

示例11: do_write_autoreg_uncached

void do_write_autoreg_uncached(int len)
{
	int ret;
	ssize_t sz;
	struct fi_cq_tagged_entry cqe;

	init_data(uc_source, len, 0xab);
	init_data(target, len, 0);
	sz = fi_write(ep[0], uc_source, len,
			 NULL, gni_addr[1], (uint64_t)target, mr_key,
			 target);
	cr_assert_eq(sz, 0);

	while ((ret = fi_cq_read(send_cq, &cqe, 1)) == -FI_EAGAIN) {
		pthread_yield();
	}

	cr_assert_eq(ret, 1);
	rdm_rma_check_tcqe(&cqe, target, FI_RMA | FI_WRITE, 0);
	rdm_rma_check_cntrs(1, 0, 0, 0);

	dbg_printf("got write context event!\n");

	cr_assert(check_data(uc_source, target, len), "Data mismatch");
}
开发者ID:RajKamal2013，项目名称:libfabric，代码行数:25，代码来源:rdm_rma.c

示例12: do_read

void do_read(int len)
{
	int ret;
	ssize_t sz;
	struct fi_cq_tagged_entry cqe;

#define READ_CTX 0x4e3dda1aULL
	init_data(source, len, 0);
	init_data(target, len, 0xad);
	sz = fi_read(ep[0], source, len,
			loc_mr, gni_addr[1], (uint64_t)target, mr_key,
			(void *)READ_CTX);
	cr_assert_eq(sz, 0);

	while ((ret = fi_cq_read(send_cq, &cqe, 1)) == -FI_EAGAIN) {
		pthread_yield();
	}

	cr_assert_eq(ret, 1);
	rdm_rma_check_tcqe(&cqe, (void *)READ_CTX, FI_RMA | FI_READ, 0);
	rdm_rma_check_cntrs(0, 1, 0, 0);

	dbg_printf("got read context event!\n");

	cr_assert(check_data(source, target, len), "Data mismatch");
}
开发者ID:RajKamal2013，项目名称:libfabric，代码行数:26，代码来源:rdm_rma.c

示例13: remove_addr_test

static void remove_addr_test(void)
{
	int ret;
	int i;
	fi_addr_t addresses[SIMPLE_ADDR_COUNT];
	fi_addr_t *compare;

	/* insert addresses */
	ret = fi_av_insert(av, (void *) simple_ep_names, SIMPLE_ADDR_COUNT,
			   addresses, 0, NULL);
	cr_assert_eq(ret, SIMPLE_ADDR_COUNT);

	/* check address contents */
	for (i = 0; i < SIMPLE_ADDR_COUNT; i++) {
		if (gnix_av->type == FI_AV_MAP) {
			compare = (fi_addr_t *) &simple_ep_names[i].gnix_addr;
			cr_assert_eq(*compare, addresses[i]);
		} else {
			cr_assert_eq(i, addresses[i]);
		}
	}

	/* remove addresses */
	ret = fi_av_remove(av, addresses, SIMPLE_ADDR_COUNT, 0);
	cr_assert_eq(ret, FI_SUCCESS);
}
开发者ID:biddisco，项目名称:libfabric，代码行数:26，代码来源:av.c

示例14: lookup_invalid_test

static void lookup_invalid_test(void)
{
	int ret;
	struct gnix_ep_name addr;
	size_t addrlen = sizeof(struct gnix_ep_name);

	/* test null addrlen */
	ret = fi_av_lookup(av, 0xdeadbeef, (void *) 0xdeadbeef, NULL);
	cr_assert_eq(ret, -FI_EINVAL);

	/* test null addr */
	ret = fi_av_lookup(av, 0xdeadbeef, NULL, &addrlen);
	cr_assert_eq(ret, -FI_EINVAL);

	/* test invalid lookup */
	if (gnix_av->type == FI_AV_TABLE) {
		ret = fi_av_lookup(av, 2000, &addr, &addrlen);
		cr_assert_eq(ret, -FI_EINVAL);

		/* test within range, but not inserted case */
		ret = fi_av_lookup(av, 1, &addr, &addrlen);
		cr_assert_eq(ret, -FI_EINVAL);
	} else {
		ret = fi_av_lookup(av, 0xdeadbeef, &addr, &addrlen);
		cr_assert_eq(ret, -FI_ENOENT);
	}
}
开发者ID:biddisco，项目名称:libfabric，代码行数:27，代码来源:av.c

示例15: Test

Test(endpoint_info, info)
{
	int ret;

	hints = fi_allocinfo();
	cr_assert(hints, "fi_allocinfo");
	hints->fabric_attr->prov_name = strdup("gni");

	ret = fi_getinfo(FI_VERSION(1, 0), NULL, 0, 0, hints, &fi);
	cr_assert(!ret, "fi_getinfo");
	cr_assert_eq(fi->ep_attr->type, FI_EP_RDM);
	cr_assert_eq(fi->next->ep_attr->type, FI_EP_DGRAM);
	cr_assert_eq(fi->next->next->ep_attr->type, FI_EP_MSG);

	fi_freeinfo(fi);

	hints->ep_attr->type = FI_EP_RDM;
	ret = fi_getinfo(FI_VERSION(1, 0), NULL, 0, 0, hints, &fi);
	cr_assert(!ret, "fi_getinfo");
	cr_assert_eq(fi->ep_attr->type, FI_EP_RDM);

	fi_freeinfo(fi);

	hints->ep_attr->type = FI_EP_DGRAM;
	ret = fi_getinfo(FI_VERSION(1, 0), NULL, 0, 0, hints, &fi);
	cr_assert(!ret, "fi_getinfo");
	cr_assert_eq(fi->ep_attr->type, FI_EP_DGRAM);

	fi_freeinfo(fi);
	fi_freeinfo(hints);
}
开发者ID:francois-wellenreiter，项目名称:libfabric，代码行数:31，代码来源:ep.c


注：本文中的cr_assert_eq函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。