C++ conn_params_init函数代码示例

/**@brief Function for application main entry.
 */
int main(void)
{
    uint32_t err_code;
    // Initialize.
    app_trace_init();
    ble_stack_init();
    device_manager_init();
    timers_init();
    APP_GPIOTE_INIT(APP_GPIOTE_MAX_USERS);
    err_code = bsp_init(BSP_INIT_LED | BSP_INIT_BUTTONS,
                        APP_TIMER_TICKS(100, APP_TIMER_PRESCALER),
                        NULL);
    APP_ERROR_CHECK(err_code);
    gap_params_init();
    advertising_init();
    services_init();
    sensor_simulator_init();
    conn_params_init();

    // Start execution.
    application_timers_start();
    advertising_start();

    // Enter main loop.
    for (;; )
    {
        power_manage();
    }
}

/**@brief Function for application main entry.
 */
int main(void)
{
    SEGGER_RTT_WriteString(0, "\033[2JTutorial Start.\n\n");
    uint32_t err_code;
    bool erase_bonds;

    // Initialize.
    timers_init();
    buttons_leds_init(&erase_bonds);
    ble_stack_init();
    device_manager_init(erase_bonds);
    gap_params_init();
    services_init();
    advertising_init();
    conn_params_init();

    // Start execution.
    application_timers_start();
    err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);

    // Enter main loop.
    for (;;)
    {
        power_manage();
    }
}

/**@brief Application main function.
 */
int main(void)
{
    // Initialize
    leds_init();
    buttons_init();
    ble_stack_init();
    bond_manager_init();
    timers_init();
    gap_params_init();
    advertising_init();
    services_init();
    sensor_sim_init();
    conn_params_init();
    sec_params_init();
    radio_notification_init();

    // Start execution
    application_timers_start();
    advertising_start();

    // Enter main loop
    for (;;)
    {
        power_manage();
    }
}

/**@brief Function for the application main entry.
 */
int main(void)
{
    uint32_t err_code;

    timers_init();
    gpiote_init();
    buttons_init();
    ble_stack_init();
    device_manager_init();

    // Initialize Bluetooth Stack parameters.
    gap_params_init();
    services_init();
    advertising_init();
    conn_params_init();

    // Start advertising.
    advertising_start();

    // Enter main loop.
    for (;;)
    {
        // Switch to a low power state until an event is available for the application
        err_code = sd_app_evt_wait();
        APP_ERROR_CHECK(err_code);
    }
}

uint32_t dfu_transport_update_start()
{
    uint32_t err_code;
    
    m_pkt_type = PKT_TYPE_INVALID;

    leds_init();

    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }

    dfu_register_callback(dfu_cb_handler);
    
    err_code = hci_mem_pool_open();
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    
    gap_params_init();
    services_init();
    advertising_init();
    conn_params_init();
    sec_params_init();
    advertising_start();
    
    return NRF_SUCCESS;
}

/**@brief Function for application main entry.
 */
int main(void)
{
    uint32_t err_code;
    

    // Initialize.
    app_trace_init();
    timers_init();
	
		bool erase_bonds;
    buttons_leds_init(&erase_bonds);
		device_manager_init(erase_bonds);
	
    ble_stack_init();
    gap_params_init();
    advertising_init();
    services_init();
    sensor_simulator_init();
    conn_params_init();

    // Start execution.
    application_timers_start();
    err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);
		
		
    // Enter main loop.
    for (;;)
    {
        power_manage();
    }
}

/**@brief Function for application main entry.
 */
int main(void)
{
    uint32_t err_code;

    // Initialize
    timers_init();
    ble_stack_init();
    bsp_module_init();
    scheduler_init();
    gap_params_init();
    advertising_init();
    services_init();
    conn_params_init();
    sec_params_init();

    // Start execution
    timers_start();
    err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);
    // Enter main loop
    for (;;)
    {
        app_sched_execute();
        power_manage();
    }
}

uint32_t ble_dfu_transport_init(void)
{
    uint32_t err_code;

    m_flags &= ~DFU_BLE_FLAG_NONE;

    err_code = ble_stack_init(true);
    VERIFY_SUCCESS(err_code);

    err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
    VERIFY_SUCCESS(err_code);

    err_code = gap_params_init();
    VERIFY_SUCCESS(err_code);

    // Initialize the Device Firmware Update Service.
    err_code = ble_dfu_init(&m_dfu);
    VERIFY_SUCCESS(err_code);

    err_code = conn_params_init();
    VERIFY_SUCCESS(err_code);

    err_code = advertising_start();
    VERIFY_SUCCESS(err_code);

    return NRF_SUCCESS;
}

/**@brief Function for application main entry.
 */
int main(void)
{
    uint32_t err_code;

    // Initialize.
    ble_stack_init();
    timers_init();

    err_code = bsp_init(BSP_INIT_LED, APP_TIMER_TICKS(100, APP_TIMER_PRESCALER), NULL);
    APP_ERROR_CHECK(err_code);

    device_manager_init();
    gap_params_init();
    advertising_init();
    services_init();
    sensor_simulator_init();
    conn_params_init();
    
    beacon_scanner_init.evt_handler   = beacon_evt_handler;
    beacon_scanner_init.error_handler = beacon_scanner_error_handler;
    app_beacon_scanner_init(&beacon_scanner_init);
    app_beacon_scanner_start();

    // Start execution.
    application_timers_start();
    advertising_start();

    // Enter main loop.
    for (;;)
    {
        power_manage();
    }
}

/**@brief Function for application main entry.
 */
int main(void)
{
    uint32_t err_code;
    bool erase_bonds;

#ifdef ENABLE_DEBUG_LOG_SUPPORT
    app_trace_init();
#endif

    APPL_LOG("START\r\n");

    // Initialize.
    timers_init();
    buttons_leds_init(&erase_bonds);
    adc_config();
    ble_stack_init();
    device_manager_init(erase_bonds);
    gap_params_init();
    advertising_init();
    services_init();
    conn_params_init();

    // Start execution.
    err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);
    APPL_LOG("start advertising : %u\n", err_code);

    // Enter main loop.
    for (;;)
    {
        power_manage();
    }
}

/**@brief Application main function.
 */
int main(void)
{
    // Initialize
    leds_init();
    timers_init();
    gpiote_init();
    buttons_init();
    bond_manager_init();
    ble_stack_init();
    scheduler_init();
    gap_params_init();
    advertising_init(BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE);
    services_init();
    sensor_sim_init();
    conn_params_init();
    sec_params_init();
    radio_notification_init();
    
    // Start execution
    timers_start();
    advertising_start();
    
    // Enter main loop
    for (;;)
    {
        app_sched_execute();
        power_manage();
    }
}

/*JSON{
    "type" : "staticmethod",
    "class" : "Bluetooth",
    "name" : "init", 
    "generate" : "jswrap_nrf_bluetooth_init"
}*/
void jswrap_nrf_bluetooth_init(void)
{
    uint32_t err_code;
    bool erase_bonds;
    
    // Initialize.
    APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, false);
    buttons_leds_init(&erase_bonds);
    ble_stack_init();
    gap_params_init();
    services_init();
    advertising_init();
    conn_params_init();
    
    err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);
    
    ble_com = false;

    // Enter main loop.
    //for (;;)
    //{
        //power_manage();
    //}
}

/**@brief Function for application main entry.
 */
int main(void)
{
    bool     erase_bonds;
    uint32_t err_code;

    // Initialize.
    app_trace_init();
    timers_init();
    uart_init();
    buttons_leds_init(&erase_bonds);
    ble_stack_init();
    APP_SCHED_INIT(SCHED_MAX_EVENT_DATA_SIZE, SCHED_QUEUE_SIZE);
    printf("BLE ANCS\n");
    device_manager_init(erase_bonds);
    db_discovery_init();
    scheduler_init();
    gap_params_init();
    service_init();
    advertising_init();
    conn_params_init();

    // Start execution.
    err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);

    // Enter main loop.
    for (;;)
    {
        app_sched_execute();
        power_manage();
    }

}

int main(void) {

    // Initialization
    led_init(SQUALL_LED_PIN);
    led_init(BLEES_LED_PIN);
    led_on(SQUALL_LED_PIN);
    led_on(BLEES_LED_PIN);
    timers_init(); // must start before conn_params

    // Setup BLE and services
    ble_stack_init();
    gap_params_init();
    advertising_init();
    services_init();
    conn_params_init();

    // Advertise data
    adv_physweb();
    advertising_start();

    // Initialization complete
    led_off(SQUALL_LED_PIN);
    led_off(BLEES_LED_PIN);
    timers_start();

    while (1) {
        power_manage();
    }
}

/**@brief Application main function.
 */
int main(void)
{
    // Initialize
    leds_init();
    timers_init();
    gpiote_init();
    buttons_init();
    bond_manager_init();
    ble_stack_init();
    ble_error_log_init();
    gap_params_init();
    advertising_init();
    alert_notification_init();
    conn_params_init();
    sec_params_init();
    radio_notification_init();
    
    // Start execution
    advertising_start();

    // Enter main loop
    for (;;)
    {
        power_manage();
    }

}