当前位置: 首页>>代码示例>>C++>>正文

C++ USB_DEVICE函数代码示例

本文整理汇总了C++中USB_DEVICE函数的典型用法代码示例。如果您正苦于以下问题：C++ USB_DEVICE函数的具体用法？C++ USB_DEVICE怎么用？C++ USB_DEVICE使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了USB_DEVICE函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: MODULE_PARM_DESC

MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
	"(0<heartbeat<65536 or 0=delay-time from dip-switches, default="
				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");

static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");

/* The vendor and product id's for the USB-PC Watchdog card */
#define USB_PCWD_VENDOR_ID	0x0c98
#define USB_PCWD_PRODUCT_ID	0x1140

/* table of devices that work with this driver */
static struct usb_device_id usb_pcwd_table[] = {
	{ USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) },
	{ }					/* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, usb_pcwd_table);

/* according to documentation max. time to process a command for the USB
 * watchdog card is 100 or 200 ms, so we give it 250 ms to do it's job */
#define USB_COMMAND_TIMEOUT	250

/* Watchdog's internal commands */
#define CMD_READ_TEMP			0x02	/* Read Temperature;
							Re-trigger Watchdog */
#define CMD_TRIGGER			CMD_READ_TEMP
#define CMD_GET_STATUS			0x04	/* Get Status Information */
#define CMD_GET_FIRMWARE_VERSION	0x08	/* Get Firmware Version */
#define CMD_GET_DIP_SWITCH_SETTINGS	0x0c	/* Get Dip Switch Settings */
开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:31，代码来源:pcwd_usb.c

示例2: USB_DEVICE_INFO

#define BTUSB_IGNORE		0x01
#define BTUSB_DIGIANSWER	0x02
#define BTUSB_CSR		0x04
#define BTUSB_SNIFFER		0x08
#define BTUSB_BCM92035		0x10
#define BTUSB_BROKEN_ISOC	0x20
#define BTUSB_WRONG_SCO_MTU	0x40
#define BTUSB_ATH3012		0x80

static struct usb_device_id btusb_table[] = {
	/* Generic Bluetooth USB device */
	{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },

	/* Broadcom SoftSailing reporting vendor specific */
	{ USB_DEVICE(0x05ac, 0x21e1) },

	/* Apple MacBookPro 7,1 */
	{ USB_DEVICE(0x05ac, 0x8213) },

	/* Apple iMac11,1 */
	{ USB_DEVICE(0x05ac, 0x8215) },

	/* Apple MacBookPro6,2 */
	{ USB_DEVICE(0x05ac, 0x8218) },

	/* Apple MacBookAir3,1, MacBookAir3,2 */
	{ USB_DEVICE(0x05ac, 0x821b) },

	/* Apple MacBookAir4,1 */
	{ USB_DEVICE(0x05ac, 0x821f) },
开发者ID:Aman11，项目名称:kernel_P7320T_ICS，代码行数:30，代码来源:btusb.c

示例3: flexcop_device_kfree

	flexcop_device_kfree(fc);
	return ret;
}

static void flexcop_usb_disconnect(struct usb_interface *intf)
{
	struct flexcop_usb *fc_usb = usb_get_intfdata(intf);
	flexcop_usb_transfer_exit(fc_usb);
	flexcop_device_exit(fc_usb->fc_dev);
	flexcop_usb_exit(fc_usb);
	flexcop_device_kfree(fc_usb->fc_dev);
	info("%s successfully deinitialized and disconnected.", DRIVER_NAME);
}

static struct usb_device_id flexcop_usb_table [] = {
	{ USB_DEVICE(0x0af7, 0x0101) },
	{ }
};
MODULE_DEVICE_TABLE (usb, flexcop_usb_table);

/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver flexcop_usb_driver = {
	.name		= "b2c2_flexcop_usb",
	.probe		= flexcop_usb_probe,
	.disconnect = flexcop_usb_disconnect,
	.id_table	= flexcop_usb_table,
};

/* module stuff */
static int __init flexcop_usb_module_init(void)
{
开发者ID:1703011，项目名称:asuswrt-merlin，代码行数:31，代码来源:flexcop-usb.c

示例4: module_param

/* Version Information */
#define DRIVER_VERSION "v0.0.13"
#define DRIVER_AUTHOR "John Homppi"
#define DRIVER_DESC "adutux (see www.ontrak.net)"

/* Module parameters */
module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");

/* Define these values to match your device */
#define ADU_VENDOR_ID 0x0a07
#define ADU_PRODUCT_ID 0x0064

/* table of devices that work with this driver */
static const struct usb_device_id device_table[] = {
	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) },		/* ADU100 */
	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, 	/* ADU120 */
	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, 	/* ADU130 */
	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+100) },	/* ADU200 */
	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+108) },	/* ADU208 */
	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+118) },	/* ADU218 */
	{ }/* Terminating entry */
};

MODULE_DEVICE_TABLE(usb, device_table);

#ifdef CONFIG_USB_DYNAMIC_MINORS
#define ADU_MINOR_BASE	0
#else
#define ADU_MINOR_BASE	67
#endif
开发者ID:CSCLOG，项目名称:beaglebone，代码行数:31，代码来源:adutux.c

示例5: USB_DEVICE

static int  mct_u232_ioctl	         (struct usb_serial_port *port,
					  struct file * file,
					  unsigned int cmd,
					  unsigned long arg);
static void mct_u232_break_ctl	         (struct usb_serial_port *port,
					  int break_state );
static int  mct_u232_tiocmget		 (struct usb_serial_port *port,
					  struct file *file);
static int  mct_u232_tiocmset		 (struct usb_serial_port *port,
					  struct file *file, unsigned int set,
					  unsigned int clear);
/*
 * All of the device info needed for the MCT USB-RS232 converter.
 */
static struct usb_device_id id_table_combined [] = {
	{ USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
	{ USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
	{ USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
	{ USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) },
	{ }		/* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, id_table_combined);

static struct usb_driver mct_u232_driver = {
	.name =		"mct_u232",
	.probe =	usb_serial_probe,
	.disconnect =	usb_serial_disconnect,
	.id_table =	id_table_combined,
	.no_dynamic_id = 	1,
};
开发者ID:JulianKemmerer，项目名称:Drexel-CS370，代码行数:31，代码来源:mct_u232.c

示例6: ath6kl_usb_destroy

	ath6kl_usb_destroy(ar_usb);
err_usb_put:
	usb_put_dev(dev);

	return ret;
}

static void ath6kl_usb_remove(struct usb_interface *interface)
{
	usb_put_dev(interface_to_usbdev(interface));
	ath6kl_usb_device_detached(interface);
}

/* table of devices that work with this driver */
static struct usb_device_id ath6kl_usb_ids[] = {
	{USB_DEVICE(0x0cf3, 0x9374)},
	{ /* Terminating entry */ },
};

MODULE_DEVICE_TABLE(usb, ath6kl_usb_ids);

static struct usb_driver ath6kl_usb_driver = {
	.name = "ath6kl_usb",
	.probe = ath6kl_usb_probe,
	.disconnect = ath6kl_usb_remove,
	.id_table = ath6kl_usb_ids,
};

static int ath6kl_usb_init(void)
{
	usb_register(&ath6kl_usb_driver);
开发者ID:ARMP，项目名称:ARMP-i9300，代码行数:31，代码来源:usb.c

示例7: USB_DEVICE_AND_INTERFACE_INFO

		USB_DEVICE_AND_INTERFACE_INFO(0x0421, x, \
		USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
		USB_CDC_ACM_PROTO_VENDOR)

#define SAMSUNG_PCSUITE_ACM_INFO(x) \
		USB_DEVICE_AND_INTERFACE_INFO(0x04e7, x, \
		USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
		USB_CDC_ACM_PROTO_VENDOR)

/*
 * USB driver structure.
 */

static const struct usb_device_id acm_ids[] = {
	/* quirky and broken devices */
	{ USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */
	.driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
	{ USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
	},
	{ USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; [email protected] */
	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
	},
	{ USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
	},
	{ USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
	},
	{ USB_DEVICE(0x079b, 0x000f), /* BT On-Air USB MODEM */
	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
开发者ID:houzhenggang，项目名称:android_kernel_sonyz_msm8974，代码行数:31，代码来源:cdc-acm.c

示例8: USB_DEVICE

#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/usb.h>

/* Version Information */
#define DRIVER_VERSION "v1.1"
#define DRIVER_AUTHOR "Sam Hocevar, [email protected]"
#define DRIVER_DESC "PlayStation 2 Trance Vibrator driver"

#define TRANCEVIBRATOR_VENDOR_ID    0x0b49    /* ASCII Corporation */
#define TRANCEVIBRATOR_PRODUCT_ID    0x064f    /* Trance Vibrator */

static struct usb_device_id id_table [] = {
    { USB_DEVICE(TRANCEVIBRATOR_VENDOR_ID, TRANCEVIBRATOR_PRODUCT_ID) },
    { },
};
MODULE_DEVICE_TABLE (usb, id_table);

/* Driver-local specific stuff */
struct trancevibrator {
    struct usb_device *udev;
    unsigned int speed;
};

static ssize_t show_speed(struct device *dev, struct device_attribute *attr,
              char *buf)
{
    struct usb_interface *intf = to_usb_interface(dev);
    struct trancevibrator *tv = usb_get_intfdata(intf);
开发者ID:274914765，项目名称:C，代码行数:31，代码来源:trancevibrator.c

示例9: usb_put_dev

failed2:
	usb_put_dev(usbdev);
	dev_err(&interface->dev, "probe failed\n");
	return -ENODEV;
}

static void go7007_loader_disconnect(struct usb_interface *interface)
{
	dev_info(&interface->dev, "disconnect\n");
	usb_put_dev(interface_to_usbdev(interface));
	usb_set_intfdata(interface, NULL);
}

static const struct usb_device_id go7007_loader_ids[] = {
	{ USB_DEVICE(0x1943, 0xa250) },
	{ USB_DEVICE(0x093b, 0xa002) },
	{ USB_DEVICE(0x093b, 0xa004) },
	{ USB_DEVICE(0x0eb1, 0x6666) },
	{ USB_DEVICE(0x0eb1, 0x6668) },
	{}                          /* Terminating entry */
};

MODULE_DEVICE_TABLE(usb, go7007_loader_ids);

static struct usb_driver go7007_loader_driver = {
	.name		= "go7007-loader",
	.probe		= go7007_loader_probe,
	.disconnect	= go7007_loader_disconnect,
	.id_table	= go7007_loader_ids,
};
开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:30，代码来源:go7007-loader.c

示例10: ipaq_shutdown

static void ipaq_shutdown(struct usb_serial *serial);
static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
			const unsigned char *buf, int count);
static int ipaq_write_bulk(struct usb_serial_port *port,
				const unsigned char *buf, int count);
static void ipaq_write_gather(struct usb_serial_port *port);
static void ipaq_read_bulk_callback(struct urb *urb);
static void ipaq_write_bulk_callback(struct urb *urb);
static int ipaq_write_room(struct tty_struct *tty);
static int ipaq_chars_in_buffer(struct tty_struct *tty);
static void ipaq_destroy_lists(struct usb_serial_port *port);


static struct usb_device_id ipaq_id_table [] = {
	/* The first entry is a placeholder for the insmod-specified device */
	{ USB_DEVICE(0x049F, 0x0003) },
	{ USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */
	{ USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */
	{ USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */
	{ USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */
	{ USB_DEVICE(0x03F0, 0x2016) }, /* HP USB Sync 1620 */
	{ USB_DEVICE(0x03F0, 0x2116) }, /* HP USB Sync 1621 */
	{ USB_DEVICE(0x03F0, 0x2216) }, /* HP USB Sync 1622 */
	{ USB_DEVICE(0x03F0, 0x3016) }, /* HP USB Sync 1630 */
	{ USB_DEVICE(0x03F0, 0x3116) }, /* HP USB Sync 1631 */
	{ USB_DEVICE(0x03F0, 0x3216) }, /* HP USB Sync 1632 */
	{ USB_DEVICE(0x03F0, 0x4016) }, /* HP USB Sync 1640 */
	{ USB_DEVICE(0x03F0, 0x4116) }, /* HP USB Sync 1641 */
	{ USB_DEVICE(0x03F0, 0x4216) }, /* HP USB Sync 1642 */
	{ USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */
	{ USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */
开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:31，代码来源:ipaq.c

示例11: MODULE_LICENSE

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless");
MODULE_FIRMWARE(CARL9170FW_NAME);
MODULE_ALIAS("ar9170usb");
MODULE_ALIAS("arusb_lnx");

/*
 * Note:
 *
 * Always update our wiki's device list (located at:
 * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ),
 * whenever you add a new device.
 */
static struct usb_device_id carl9170_usb_ids[] = {
	/* Atheros 9170 */
	{ USB_DEVICE(0x0cf3, 0x9170) },
	/* Atheros TG121N */
	{ USB_DEVICE(0x0cf3, 0x1001) },
	/* TP-Link TL-WN821N v2 */
	{ USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON |
		 CARL9170_ONE_LED },
	/* 3Com Dual Band 802.11n USB Adapter */
	{ USB_DEVICE(0x0cf3, 0x1010) },
	/* H3C Dual Band 802.11n USB Adapter */
	{ USB_DEVICE(0x0cf3, 0x1011) },
	/* Cace Airpcap NX */
	{ USB_DEVICE(0xcace, 0x0300) },
	/* D-Link DWA 160 A1 */
	{ USB_DEVICE(0x07d1, 0x3c10) },
	/* D-Link DWA 160 A2 */
	{ USB_DEVICE(0x07d1, 0x3a09) },
开发者ID:MaxChina，项目名称:linux，代码行数:31，代码来源:usb.c

示例12: USB_DEVICE

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/slab.h>

#define VENDOR_ID	0x08f7
#define PRODUCT_ID	0x0002

/* table of devices that work with this driver */
static struct usb_device_id id_table[] = {
	{ USB_DEVICE(VENDOR_ID, PRODUCT_ID) },
	{ },
};
MODULE_DEVICE_TABLE(usb, id_table);

struct gotemp {
	struct usb_device *udev;
	int temperature;
};

#define CMD_ID_START_MEASUREMENTS	0x18
#define CMD_ID_INIT			0x1A

struct output_packet {
	u8	cmd;
	u8	params[7];
} __attribute__ ((packed));

static int send_cmd(struct gotemp *gdev, u8 cmd)
{
开发者ID:alexander-naumov，项目名称:usb_tutorial，代码行数:31，代码来源:gotemp.c

示例13: BT_DMP

#define BT_DMP( A... )
#endif

#ifndef CONFIG_BT_USB_ZERO_PACKET
#undef  URB_ZERO_PACKET
#define URB_ZERO_PACKET 0
#endif

static struct usb_driver hci_usb_driver; 

static struct usb_device_id bluetooth_ids[] = {
	/* Generic Bluetooth USB device */
	{ USB_DEVICE_INFO(HCI_DEV_CLASS, HCI_DEV_SUBCLASS, HCI_DEV_PROTOCOL) },

	/* Ericsson with non-standard id */
	{ USB_DEVICE(0x0bdb, 0x1002) },

	/* Bluetooth Ultraport Module from IBM */
	{ USB_DEVICE(0x04bf, 0x030a) },

	{ }	/* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, bluetooth_ids);

static struct usb_device_id ignore_ids[] = {
	/* Broadcom BCM2033 without firmware */
	{ USB_DEVICE(0x0a5c, 0x2033) },

	{ }	/* Terminating entry */
};
开发者ID:sarnobat，项目名称:knoppix，代码行数:31，代码来源:hci_usb.c

示例14: usb_set_intfdata

	int open = 0; /* FIXME! iforce->dev.handle->open; */

	usb_set_intfdata(intf, NULL);
	if (iforce) {
		iforce->usbdev = NULL;
		input_unregister_device(iforce->dev);

		if (!open) {
			iforce_delete_device(iforce);
			kfree(iforce);
		}
	}
}

static struct usb_device_id iforce_usb_ids [] = {
	{ USB_DEVICE(0x044f, 0xa01c) },		/* Thrustmaster Motor Sport GT */
	{ USB_DEVICE(0x046d, 0xc281) },		/* Logitech WingMan Force */
	{ USB_DEVICE(0x046d, 0xc291) },		/* Logitech WingMan Formula Force */
	{ USB_DEVICE(0x05ef, 0x020a) },		/* AVB Top Shot Pegasus */
	{ USB_DEVICE(0x05ef, 0x8884) },		/* AVB Mag Turbo Force */
	{ USB_DEVICE(0x05ef, 0x8888) },		/* AVB Top Shot FFB Racing Wheel */
	{ USB_DEVICE(0x061c, 0xc0a4) },         /* ACT LABS Force RS */
	{ USB_DEVICE(0x06f8, 0x0001) },		/* Guillemot Race Leader Force Feedback */
	{ USB_DEVICE(0x06f8, 0x0004) },		/* Guillemot Force Feedback Racing Wheel */
	{ USB_DEVICE(0x06f8, 0xa302) },		/* Guillemot Jet Leader 3D */
	{ }					/* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, iforce_usb_ids);

struct usb_driver iforce_usb_driver = {
开发者ID:ivucica，项目名称:linux，代码行数:31，代码来源:iforce-usb.c

示例15: device

	{DEVICE_G1K(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
	{DEVICE_G1K(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
	{DEVICE_G1K(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
	{DEVICE_G1K(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
	{DEVICE_G1K(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
	{DEVICE_G1K(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
	{DEVICE_G1K(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
	{DEVICE_G1K(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
	{DEVICE_G1K(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
	{DEVICE_G1K(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
	{DEVICE_G1K(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
	{DEVICE_G1K(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
	{DEVICE_G1K(0x1bc7, 0x900e)},	/* Telit Gobi QDL device */

	/* Gobi 2000 devices */
	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi 2000 QDL device */
	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi 2000 QDL device */
	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi 2000 QDL device */
	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi 2000 QDL device */
	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi 2000 QDL device */
	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
	{USB_DEVICE(0x05c6, 0x9208)},	/* Generic Gobi 2000 QDL device */
	{USB_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */
	{USB_DEVICE(0x05c6, 0x9224)},	/* Sony Gobi 2000 QDL device (N0279, VU730) */
	{USB_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
	{USB_DEVICE(0x05c6, 0x9244)},	/* Samsung Gobi 2000 QDL device (VL176) */
	{USB_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */
	{USB_DEVICE(0x03f0, 0x241d)},	/* HP Gobi 2000 QDL device (VP412) */
	{USB_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */
	{USB_DEVICE(0x05c6, 0x9214)},	/* Acer Gobi 2000 QDL device (VP413) */
开发者ID:383530895，项目名称:linux，代码行数:31，代码来源:qcserial.c


注：本文中的USB_DEVICE函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。