当前位置: 首页>>代码示例>>C++>>正文

C++ USBD_CtlSendStatus函数代码示例

本文整理汇总了C++中USBD_CtlSendStatus函数的典型用法代码示例。如果您正苦于以下问题：C++ USBD_CtlSendStatus函数的具体用法？C++ USBD_CtlSendStatus怎么用？C++ USBD_CtlSendStatus使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了USBD_CtlSendStatus函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: USBD_SetAddress

/**
* @brief  USBD_SetAddress
*         Set device address
* @param  pdev: device instance
* @param  req: usb request
* @retval status
*/
static void USBD_SetAddress(USB_OTG_CORE_HANDLE  *pdev, 
                            USB_SETUP_REQ *req)
{
  uint8_t  dev_addr; 
  
  if ((req->wIndex == 0) && (req->wLength == 0)) 
  {
    dev_addr = (uint8_t)(req->wValue) & 0x7F;     
    
    if (pdev->dev.device_status == USB_OTG_CONFIGURED) 
    {
      USBD_CtlError(pdev , req);
    } 
    else 
    {
      pdev->dev.device_address = dev_addr;
      DCD_EP_SetAddress(pdev, dev_addr);               
      USBD_CtlSendStatus(pdev);                         
      
      if (dev_addr != 0) 
      {
        pdev->dev.device_status  = USB_OTG_ADDRESSED;
      } 
      else 
      {
        pdev->dev.device_status  = USB_OTG_DEFAULT; 
      }
    }
  } 
  else 
  {
     USBD_CtlError(pdev , req);                        
  } 
}
开发者ID:12019，项目名称:STM32F4_UVC_Camera，代码行数:41，代码来源:usbd_req.c

示例2: USBD_SetAddress

/**
* @brief  USBD_SetAddress
*         Set device address
* @param  pdev: device instance
* @param  req: usb request
* @retval status
*/
static void USBD_SetAddress(USBD_HandleTypeDef *pdev , 
                            USBD_SetupReqTypedef *req)
{
  uint8_t  dev_addr; 
  
  if ((req->wIndex == 0) && (req->wLength == 0)) 
  {
    dev_addr = (uint8_t)(req->wValue) & 0x7F;     
    
    if (pdev->dev_state == USBD_STATE_CONFIGURED) 
    {
      USBD_CtlError(pdev , req);
    } 
    else 
    {
      pdev->dev_address = dev_addr;
      USBD_LL_SetUSBAddress(pdev, dev_addr);               
      USBD_CtlSendStatus(pdev);                         
      
      if (dev_addr != 0) 
      {
        pdev->dev_state  = USBD_STATE_ADDRESSED;
      } 
      else 
      {
        pdev->dev_state  = USBD_STATE_DEFAULT; 
      }
    }
  } 
  else 
  {
     USBD_CtlError(pdev , req);                        
  } 
}
开发者ID:Carrostic，项目名称:stm32plus，代码行数:41，代码来源:usbd_ctlreq.cpp

示例3: USBD_StdItfReq

/**
* @brief  USBD_StdItfReq
*         Handle standard usb interface requests
* @param  pdev: device instance
* @param  req: usb request
* @retval status
*/
USBD_StatusTypeDef  USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef  *req)
{
  USBD_StatusTypeDef ret = USBD_OK; 
  
  switch (pdev->dev_state) 
  {
  case USBD_STATE_CONFIGURED:
    
    if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES) 
    {
      pdev->pClass->Setup (pdev, req); 
      
      if((req->wLength == 0)&& (ret == USBD_OK))
      {
         USBD_CtlSendStatus(pdev);
      }
    } 
    else 
    {                                               
       USBD_CtlError(pdev , req);
    }
    break;
    
  default:
     USBD_CtlError(pdev , req);
    break;
  }
  return USBD_OK;
}
开发者ID:451506709，项目名称:automated_machine，代码行数:36，代码来源:usbd_ctlreq.c

示例4: USBD_DataOutStage

/**
  * @brief  USBD_DataOutStage 
  *         Handle data out stage
  * @param  pdev: device instance
  * @param  epnum: endpoint index
  * @retval status
  */
static uint8_t USBD_DataOutStage(USB_CORE_HANDLE *pdev , uint8_t epnum)
{
  USB_EP *ep;
  
  if(epnum == 0) 
  {
    ep = &pdev->dev.out_ep[0];
    if ( pdev->dev.device_state == USB_EP0_DATA_OUT)
    {
      if(ep->rem_data_len > ep->maxpacket)
      {
        ep->rem_data_len -=  ep->maxpacket;
                
        USBD_CtlContinueRx (pdev, 
                            ep->xfer_buff,
                            MIN(ep->rem_data_len ,ep->maxpacket));
      }
      else
      {
        if((pdev->dev.class_cb->EP0_RxReady != NULL)&&
           (pdev->dev.device_status == USB_CONFIGURED))
        {
          pdev->dev.class_cb->EP0_RxReady(pdev); 
        }
        USBD_CtlSendStatus(pdev);
      }
    }
  }
  else if((pdev->dev.class_cb->DataOut != NULL)&&
          (pdev->dev.device_status == USB_CONFIGURED))
  {
    pdev->dev.class_cb->DataOut(pdev, epnum); 
  }  
  return USBD_OK;
}
开发者ID:RogatY，项目名称:RotalCalib，代码行数:42，代码来源:usbd_core.c

示例5: USBD_StdItfReq

/**
* @brief  USBD_StdItfReq
*         Handle standard usb interface requests
* @param  pdev: device instance
* @param  req: usb request
* @retval status
*/
USBD_StatusTypeDef  USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef  *req)
{
  USBD_StatusTypeDef ret = USBD_OK; 
  
  switch (pdev->dev_state) 
  {
  case USBD_STATE_CONFIGURED:
    
    if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES) 
    {
      pdev->pEventSource->UsbEventSender.raiseEvent(stm32plus::usb::DeviceClassSdkSetupEvent(*req));
      
      if((req->wLength == 0)&& (ret == USBD_OK))
      {
         USBD_CtlSendStatus(pdev);
      }
    } 
    else 
    {                                               
       USBD_CtlError(pdev , req);
    }
    break;
    
  default:
     USBD_CtlError(pdev , req);
    break;
  }
  return USBD_OK;
}
开发者ID:Carrostic，项目名称:stm32plus，代码行数:36，代码来源:usbd_ctlreq.cpp

示例6: USBD_StdItfReq

/**
* @brief  USBD_StdItfReq
*         Handle standard usb interface requests
* @param  pdev: USB OTG device instance
* @param  req: usb request
* @retval status
*/
USBD_Status  USBD_StdItfReq (USB_OTG_CORE_HANDLE  *pdev, USB_SETUP_REQ  *req)
{
  USBD_Status ret = USBD_OK; 
  
  switch (pdev->dev.device_status) 
  {
  case USB_OTG_CONFIGURED:
    
    if (LOBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) 
    {
      pdev->dev.class_cb->Setup (pdev, req); 
      
      if((req->wLength == 0)&& (ret == USBD_OK))
      {
         USBD_CtlSendStatus(pdev);
      }
    } 
    else 
    {                                               
       USBD_CtlError(pdev , req);
    }
    break;
    
  default:
     USBD_CtlError(pdev , req);
    break;
  }
  return ret;
}
开发者ID:12019，项目名称:STM32F4_UVC_Camera，代码行数:36，代码来源:usbd_req.c

示例7: USBD_DataOutStage

/**
* @brief  USBD_DataOutStage
*         Handle data out stage
* @param  pdev: device instance
* @param  epnum: endpoint index
* @retval status
*/
static uint8_t USBD_DataOutStage ( USB_OTG_CORE_HANDLE *pdev , uint8_t epnum ) {
    USB_OTG_EP *ep;

    if ( epnum == 0 ) {
        ep = &pdev->dev.out_ep[0];
        if ( pdev->dev.device_state == USB_OTG_EP0_DATA_OUT ) {
            if ( ep->rem_data_len > ep->maxpacket ) {
                ep->rem_data_len -=  ep->maxpacket;

                if ( pdev->cfg.dma_enable == 1 ) {
                    /* in slave mode this, is handled by the RxSTSQLvl ISR */
                    ep->xfer_buff += ep->maxpacket;
                }
                USBD_CtlContinueRx ( pdev,
                                     ep->xfer_buff,
                                     MIN ( ep->rem_data_len ,ep->maxpacket ) );
            } else {
                if ( ( pdev->dev.class_cb->EP0_RxReady != NULL ) &&
                        ( pdev->dev.device_status == USB_OTG_CONFIGURED ) ) {
                    pdev->dev.class_cb->EP0_RxReady ( pdev );
                }
                USBD_CtlSendStatus ( pdev );
            }
        }
    } else if ( ( pdev->dev.class_cb->DataOut != NULL ) &&
                ( pdev->dev.device_status == USB_OTG_CONFIGURED ) ) {
        pdev->dev.class_cb->DataOut ( pdev, epnum );
    }
    return USBD_OK;
}
开发者ID:skalda348，项目名称:kizarmprobe，代码行数:37，代码来源:usbd_core.c

示例8: USBD_SetFeature

/**
* @brief  USBD_SetFeature
*         Handle Set device feature request
* @param  pdev: device instance
* @param  req: usb request
* @retval status
*/
static void USBD_SetFeature(USB_OTG_CORE_HANDLE  *pdev, 
                            USB_SETUP_REQ *req)
{

  USB_OTG_DCTL_TypeDef     dctl;
  uint8_t test_mode = 0;
 
  if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
  {
    pdev->dev.DevRemoteWakeup = 1;  
    pdev->dev.class_cb->Setup (pdev, req);   
    USBD_CtlSendStatus(pdev);
  }

  else if ((req->wValue == USB_FEATURE_TEST_MODE) && 
           ((req->wIndex & 0xFF) == 0))
  {
    dctl.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DCTL);
    
    test_mode = req->wIndex >> 8;
    switch (test_mode) 
    {
    case 1: // TEST_J
      dctl.b.tstctl = 1;
      break;
      
    case 2: // TEST_K	
      dctl.b.tstctl = 2;
      break;
      
    case 3: // TEST_SE0_NAK
      dctl.b.tstctl = 3;
      break;
      
    case 4: // TEST_PACKET
      dctl.b.tstctl = 4;
      break;
      
    case 5: // TEST_FORCE_ENABLE
      dctl.b.tstctl = 5;
      break;
    }
    SET_TEST_MODE = dctl;
    pdev->dev.test_mode = 1;
    USBD_CtlSendStatus(pdev);
  }
开发者ID:denisweir，项目名称:STM32F40X，代码行数:53，代码来源:usbd_req.c

示例9: USBD_SetFeature

/**
* @brief  USBD_SetFeature
*         Handle Set device feature request
* @param  pdev: device instance
* @param  req: usb request
* @retval status
*/
static void USBD_SetFeature(USBD_HandleTypeDef *pdev,
                            USBD_SetupReqTypedef *req) {

    if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) {
        pdev->dev_remote_wakeup = 1;
        pdev->pClass->Setup(pdev, req);
        USBD_CtlSendStatus(pdev);
    }

}
开发者ID:toptan，项目名称:morse-code-demo，代码行数:17，代码来源:usbd_ctlreq.c

示例10: USBD_SetFeature

/**
  * @brief  USBD_SetFeature
  *         Handle Set device feature request
  * @param  pdev: device instance
  * @param  req: usb request
  * @retval status
  */
static void USBD_SetFeature(USB_CORE_HANDLE  *pdev, 
                            USB_SETUP_REQ *req)
{
 
  if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
  {
    pdev->dev.DevRemoteWakeup = 1;  
    pdev->dev.class_cb->Setup (pdev, req);   
    USBD_CtlSendStatus(pdev);
  }
}
开发者ID:HuanDeng，项目名称:Qproject，代码行数:18，代码来源:usbd_req.c

示例11: USBD_SetFeature

/**
* @brief  USBD_SetFeature
*         Handle Set device feature request
* @param  pdev: device instance
* @param  req: usb request
* @retval status
*/
static void USBD_SetFeature(USBD_HandleTypeDef *pdev , 
                            USBD_SetupReqTypedef *req)
{

  if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
  {
    pdev->dev_remote_wakeup = 1;  
    pdev->pEventSource->UsbEventSender.raiseEvent(stm32plus::usb::DeviceClassSdkSetupEvent(*req));
    USBD_CtlSendStatus(pdev);
  }

}
开发者ID:Carrostic，项目名称:stm32plus，代码行数:19，代码来源:usbd_ctlreq.cpp

示例12: USBD_ClrFeature

/**
* @brief  USBD_ClrFeature
*         Handle clear device feature request
* @param  pdev: device instance
* @param  req: usb request
* @retval status
*/
static void USBD_ClrFeature(USBD_HandleTypeDef *pdev,
                            USBD_SetupReqTypedef *req) {
    switch (pdev->dev_state) {
        case USBD_STATE_ADDRESSED:
        case USBD_STATE_CONFIGURED:
            if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) {
                pdev->dev_remote_wakeup = 0;
                pdev->pClass->Setup(pdev, req);
                USBD_CtlSendStatus(pdev);
            }
            break;

        default :
            USBD_CtlError(pdev, req);
            break;
    }
}
开发者ID:toptan，项目名称:morse-code-demo，代码行数:24，代码来源:usbd_ctlreq.c

示例13: USBD_LL_DataOutStage

/**
* @brief  USBD_DataOutStage 
*         Handle data OUT stage
* @param  pdev: device instance
* @param  epnum: endpoint index
* @retval status
*/
USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata)
{
  USBD_EndpointTypeDef    *pep;
  
  if(epnum == 0) 
  {
    pep = &pdev->ep_out[0];
    
    if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
    {
      if(pep->rem_length > pep->maxpacket)
      {
        pep->rem_length -=  pep->maxpacket;
       
        USBD_CtlContinueRx (pdev, 
                            pdata,
                            MIN(pep->rem_length ,pep->maxpacket));
      }
      else
      {
        uint8_t intf;
        for (intf =0; intf < USBD_MAX_NUM_INTERFACES; intf++) {
          if(usbd_is_valid_intf(pdev, intf) &&  (pdev->interfacesClass[intf].pClass->EP0_RxReady != NULL)&&
             (pdev->dev_state == USBD_STATE_CONFIGURED))
          {
            ((EP0_RxReady_t)PIC(pdev->interfacesClass[intf].pClass->EP0_RxReady))(pdev); 
          }
        }
        USBD_CtlSendStatus(pdev);
      }
    }
  }
  else {

    uint8_t intf;
    for (intf =0; intf < USBD_MAX_NUM_INTERFACES; intf++) {
      if( usbd_is_valid_intf(pdev, intf) &&  (pdev->interfacesClass[intf].pClass->DataOut != NULL)&&
         (pdev->dev_state == USBD_STATE_CONFIGURED))
      {
        ((DataOut_t)PIC(pdev->interfacesClass[intf].pClass->DataOut))(pdev, epnum, pdata); 
      }
    }
  }  
  return USBD_OK;
}
开发者ID:LedgerHQ，项目名称:blue-secure-sdk，代码行数:52，代码来源:usbd_core.c

示例14: USBD_ClrFeature

/**
  * @brief  USBD_ClrFeature
  *         Handle clear device feature request
  * @param  pdev: device instance
  * @param  req: usb request
  * @retval status
  */
static void USBD_ClrFeature(USB_CORE_HANDLE  *pdev, 
                            USB_SETUP_REQ *req)
{
  switch (pdev->dev.device_status)
  {
  case USB_ADDRESSED:
  case USB_CONFIGURED:
    if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) 
    {
      pdev->dev.DevRemoteWakeup = 0; 
      pdev->dev.class_cb->Setup (pdev, req);   
      USBD_CtlSendStatus(pdev);
    }
    break;
    
  default :
     USBD_CtlError(pdev , req);
    break;
  }
}
开发者ID:HuanDeng，项目名称:Qproject，代码行数:27，代码来源:usbd_req.c

示例15: USBD_ClrFeature

/**
* @brief  USBD_ClrFeature
*         Handle clear device feature request
* @param  pdev: device instance
* @param  req: usb request
* @retval status
*/
static void USBD_ClrFeature(USBD_HandleTypeDef *pdev , 
                            USBD_SetupReqTypedef *req)
{
  switch (pdev->dev_state)
  {
  case USBD_STATE_ADDRESSED:
  case USBD_STATE_CONFIGURED:
    if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) 
    {
      pdev->dev_remote_wakeup = 0; 
      pdev->pEventSource->UsbEventSender.raiseEvent(stm32plus::usb::DeviceClassSdkSetupEvent(*req));
      USBD_CtlSendStatus(pdev);
    }
    break;
    
  default :
     USBD_CtlError(pdev , req);
    break;
  }
}
开发者ID:Carrostic，项目名称:stm32plus，代码行数:27，代码来源:usbd_ctlreq.cpp


注：本文中的USBD_CtlSendStatus函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。