本文整理汇总了C++中TestThread函数的典型用法代码示例。如果您正苦于以下问题：C++ TestThread函数的具体用法？C++ TestThread怎么用？C++ TestThread使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了TestThread函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: main
/*
* Application entry point.
*/
int main(void) {
Thread *shelltp = NULL;
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the serial driver 1 using the driver default configuration.
*/
sdStart(&SD1, NULL);
/*
* Shell manager initialization.
*/
shellInit();
/*
* Creates the blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Normal main() thread activity.
*/
while (TRUE) {
if (!shelltp)
shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
else if (chThdTerminated(shelltp)) {
chThdRelease(shelltp); /* Recovers memory of the previous shell. */
shelltp = NULL; /* Triggers spawning of a new shell. */
}
#if 0
if (SIU.GPDI[GPIO_BUTTON1].B.PDI) {
volatile msg_t result;
#if 0
MemoryStream report;
msObjectInit(&report, report_buffer, sizeof(report_buffer), 0);
result = TestThread(&report);
#else
result = TestThread(&SD1);
#endif
}
#endif
chThdSleepMilliseconds(1000);
}
return 0;
}示例2: main
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the serial driver 1 using the driver default configuration.
*/
sdStart(&SD1, NULL);
/*
* Creates the blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Normal main() thread activity.
*/
while (TRUE) {
chThdSleepMilliseconds(500);
if (!palReadPad(IOPORT2, PIOB_SW1))
sdWrite(&SD1, (uint8_t *)"Hello World!\r\n", 14);
if (!palReadPad(IOPORT2, PIOB_SW2))
TestThread(&SD1);
}
return 0;
}示例3: main
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the serial driver 1 using the driver default configuration.
*/
palClearPad(IOPORT2, PORTB_LED1);
sdStart(&SD1, NULL);
/*
* Starts the LED blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
TestThread(&SD1);
while(TRUE) {
chThdSleepMilliseconds(1000);
}
}示例4: TestThread
static void *PosixTestThread( void *pData )
{
(void)pData;
TestThread();
return NULL;
}示例5: WinTestThread
static DWORD WINAPI WinTestThread( LPVOID lpParameter )
{
TestThread();
return 0;
}示例6: main
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the serial driver 2 using the driver default configuration.
*/
sdStart(&SD2, NULL);
/*
* Creates the blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Normal main() thread activity, in this demo it does nothing except
* sleeping in a loop and check the button state.
*/
while (TRUE) {
if (palReadPad(GPIOA, GPIOA_BUTTON))
TestThread(&SD2);
chThdSleepMilliseconds(500);
}
}示例7: main
/*
* Application entry point.
*/
void main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the serial driver 1 using the driver default configuration.
* The STM8L-Discovery requires USART1 pins remapping on PA2 and PA3.
*/
SYSCFG->RMPCR1 = 0x1C;
sdStart(&SD1, NULL);
/*
* Creates the blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Normal main() thread activity.
*/
while (TRUE) {
if (palReadPad(GPIOC, PC_BUTTON) == PAL_LOW)
TestThread(&SD1);
chThdSleepMilliseconds(1000);
}
}示例8: main
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the serial driver 2 using the driver default configuration.
* PA2(TX) and PA3(RX) are routed to USART2.
*/
sdStart(&SD2, NULL);
palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
/*
* Creates the example thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Normal main() thread activity, in this demo it just performs
* a shell respawn upon its termination.
*/
while (TRUE) {
if (palReadPad(GPIOA, GPIOA_BUTTON))
TestThread(&SD2);
chThdSleepMilliseconds(500);
}
}示例9: TestThread
void OpenHome::TestFramework::Runner::Main(TInt /*aArgc*/, TChar* /*aArgv*/[], Net::InitialisationParams* aInitParams)
{
Net::UpnpLibrary::InitialiseMinimal(aInitParams);
TestThread();
delete aInitParams;
Net::UpnpLibrary::Close();
}示例10: main
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates serial 1 (UART0) using the driver default configuration.
*/
sdStart(&SD1, NULL);
/*
* Creates the blinker threads.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
chThdCreateStatic(waThread3, sizeof(waThread3), NORMALPRIO, Thread3, NULL);
TestThread(&SD1);
while (1) {
chThdSleepMilliseconds(500);
}
}示例11: main
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the serial driver 1 using the driver default configuration.
*/
sdStart(&SD1, NULL);
/*
* Creates the blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Normal main() thread activity, in this demo it does nothing except
* checking a button and run a test suite if button was pressed.
*/
while (TRUE) {
if (!palReadPad(IOPORT6, P6_I_BUTTON))
TestThread(&SD1);
chThdSleepMilliseconds(500);
}
return 0;
}示例12: main
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the SD1 and SPI1 drivers.
*/
sdStart(&SD4, NULL); /* Default: 38400,8,N,1. */
/*
* Creates the blinker threads.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Normal main() thread activity.
*/
while (TRUE) {
if (!palReadPad(GPIO3, GPIO3_SW_USER1)) {
TestThread(&SD4);
}
chThdSleepMilliseconds(100);
}
}示例13: main
/*
* Application entry point.
*/
void main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the serial driver 1 using the driver default configuration.
*/
sdStart(&SD1, NULL);
/*
* Creates the blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Normal main() thread activity.
*/
while (TRUE) {
if (palReadPad(IOPORT7, PG_BT5) == PAL_LOW)
TestThread(&SD1);
if (palReadPad(IOPORT7, PG_BT6) == PAL_LOW)
sdWriteTimeout(&SD1, "Hello World!\r\n", 14, TIME_INFINITE);
chThdSleepMilliseconds(1000);
}
}示例14: main
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the serial driver 1 using the driver default configuration.
* PA9(TX) and PA10(RX) are routed to USART1.
*/
sdStart(&SD1, NULL);
/*
* Creates the example threads.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO+1, Thread1, NULL);
chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO+1, Thread2, NULL);
/*
* Normal main() thread activity, in this demo it does nothing except
* sleeping in a loop and check the button state, when the button is
* pressed the test procedure is launched.
*/
while (TRUE) {
if (palReadPad(GPIOA, GPIOA_BUTTON))
TestThread(&SD1);
chThdSleepMilliseconds(500);
}
}示例15: main
/*
* Entry point, note, the main() function is already a thread in the system
* on entry.
*/
int main(int argc, char **argv) {
(void)argc;
(void)argv;
/*
* Activates the serial driver 1 using the driver default configuration.
*/
sdStart(&SD1, NULL);
/*
* Creates the blinker threads.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
/*
* Normal main() thread activity, in this demo it does nothing except
* sleeping in a loop and check the button state.
*/
while (TRUE) {
if (!palReadPad(GPIO0, GPIO0_SW3))
TestThread(&SD1);
chThdSleepMilliseconds(500);
}
return 0;
}