当前位置: 首页>>代码示例>>C++>>正文

C++ SetConnection函数代码示例

本文整理汇总了C++中SetConnection函数的典型用法代码示例。如果您正苦于以下问题：C++ SetConnection函数的具体用法？C++ SetConnection怎么用？C++ SetConnection使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了SetConnection函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: mtk_voice_bt_close

static int mtk_voice_bt_close(struct snd_pcm_substream *substream)
{
	pr_debug("mtk_voice_bt_close\n");
	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
		pr_err("%s with SNDRV_PCM_STREAM_CAPTURE\n", __func__);
		AudDrv_Clk_Off();
		AudDrv_ANA_Clk_Off();
		return 0;
	}

	/* interconnection setting */
	SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I02,
		      Soc_Aud_InterConnectionOutput_O17);
	SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I02,
		      Soc_Aud_InterConnectionOutput_O18);
	SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I14,
		      Soc_Aud_InterConnectionOutput_O02);
	SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I21,
		      Soc_Aud_InterConnectionOutput_O02);

	/* here start digital part */
	SetMemoryPathEnable(Soc_Aud_Digital_Block_DAI_BT, false);
	SetDaiBtEnable(false);

	EnableAfe(false);
	AudDrv_Clk_Off();
	AudDrv_ANA_Clk_Off();

	voice_bt_Status = false;

	return 0;
}
开发者ID:P-D-A，项目名称:android_kernel_lge_mt6753，代码行数:32，代码来源:mt_soc_pcm_voice_md1_bt.c

示例2: mtk_pcm_I2S0dl1_start

static int mtk_pcm_I2S0dl1_start(struct snd_pcm_substream *substream)
{
    struct snd_pcm_runtime *runtime = substream->runtime;
    printk("%s\n", __func__);
    // here start digital part

    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I05, Soc_Aud_InterConnectionOutput_O00);
    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I06, Soc_Aud_InterConnectionOutput_O01);
    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I05, Soc_Aud_InterConnectionOutput_O03);
    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I06, Soc_Aud_InterConnectionOutput_O04);

    SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, true);

    SetSampleRate(Soc_Aud_Digital_Block_MEM_DL1, runtime->rate);
    SetChannels(Soc_Aud_Digital_Block_MEM_DL1, runtime->channels);
    SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_DL1, true);

    EnableAfe(true);

#ifdef _DEBUG_6328_CLK
    //Debug 6328 Digital to Analog path clock and data work or not. and read TEST_OUT(0x206)
//    Ana_Set_Reg(AFE_MON_DEBUG0, 0x4600 , 0xcf00); // monitor 6328 digitala data sent to analog or not
    Ana_Set_Reg(AFE_MON_DEBUG0, 0x4200 , 0xcf00); // monitor 6328 digitala data sent to analog or not    
    Ana_Set_Reg(TEST_CON0, 0x0e00 , 0xffff);
#endif    

#if 0 // test 6328 sgen
    Ana_Set_Reg(AFE_SGEN_CFG0 , 0x0080 , 0xffff);
    Ana_Set_Reg(AFE_SGEN_CFG1 , 0x0101 , 0xffff);    
    Ana_Set_Reg(AFE_AUDIO_TOP_CON0, 0x0000, 0xffff);   //power on clock    
    //    Ana_Set_Reg(PMIC_AFE_TOP_CON0, 0x0002, 0x0002);   //UL from sinetable
    Ana_Set_Reg(PMIC_AFE_TOP_CON0, 0x0001, 0x0001);   //DL from sinetable      
#endif
    return 0;
}
开发者ID:dadimesin，项目名称:mt6577-kernel-3.10.65，代码行数:35，代码来源:mt_soc_pcm_dl1_i2s0Dl1.c

示例3: mtk_pcm_dl1Bt_stop

static int mtk_pcm_dl1Bt_stop(struct snd_pcm_substream *substream)
{

	PRINTK_AUDDRV("mtk_pcm_dl1Bt_stop\n");

	SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, false);

	/* here to turn off digital part */
	SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I05,
		      Soc_Aud_InterConnectionOutput_O02);
	SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I06,
		      Soc_Aud_InterConnectionOutput_O02);
	SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_DL1, false);

	SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, false);

	SetMemoryPathEnable(Soc_Aud_Digital_Block_DAI_BT, false);
	if (GetMemoryPathEnable(Soc_Aud_Digital_Block_DAI_BT) == false) {
		/* turn off DAI BT if not using */
		SetDaiBtEnable(false);
	}

	EnableAfe(false);
	RemoveMemifSubStream(Soc_Aud_Digital_Block_MEM_DL1, substream);
	AudDrv_Clk_Off();

	return 0;
}
开发者ID:John677，项目名称:Kernal_k3note，代码行数:28，代码来源:mt_soc_pcm_dl1_bt.c

示例4: StopAudioAWBHardware

static void StopAudioAWBHardware(struct snd_pcm_substream *substream)
{
    printk("StopAudioAWBHardware \n");

    SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_AWB, false);

    // here to set interrupt
    SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ2_MCU_MODE, false);

    if (GetI2SDacEnable() == false)
    {
        SetI2SDacEnable(false);
    }

    // here to turn off digital part
#if 0 // TODO(Harvey)
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I15, Soc_Aud_InterConnectionOutput_O05);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I16, Soc_Aud_InterConnectionOutput_O06);
#else
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I00, Soc_Aud_InterConnectionOutput_O05);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I01, Soc_Aud_InterConnectionOutput_O06);
#endif

    EnableAfe(false);
}
开发者ID:Swapnil133609，项目名称:Zeus_exp，代码行数:25，代码来源:mt_soc_pcm_mrgrx_awb.c

示例5: StartAudioCaptureHardware

static void StartAudioCaptureHardware(struct snd_pcm_substream *substream)
{
    printk("StartAudioCaptureHardware \n");

    ConfigAdcI2S(substream);
    Set2ndI2SAdcIn(mAudioDigitalI2S);//To do, JY

    SetMemIfFetchFormatPerSample(Soc_Aud_Digital_Block_MEM_VUL_DATA2, AFE_WLEN_16_BIT);
    SetoutputConnectionFormat(OUTPUT_DATA_FORMAT_16BIT, Soc_Aud_InterConnectionOutput_O21);
    SetoutputConnectionFormat(OUTPUT_DATA_FORMAT_16BIT, Soc_Aud_InterConnectionOutput_O22);

    if (GetMemoryPathEnable(Soc_Aud_Digital_Block_I2S_IN_ADC_2) == false)
    {
        SetMemoryPathEnable(Soc_Aud_Digital_Block_I2S_IN_ADC_2, true);
        Set2ndI2SAdcEnable(true);//To Do, JY
    }
    else
    {
        SetMemoryPathEnable(Soc_Aud_Digital_Block_I2S_IN_ADC_2, true);
    }

    // here to set interrupt
    SetIrqMcuCounter(Soc_Aud_IRQ_MCU_MODE_IRQ2_MCU_MODE, substream->runtime->period_size);
    SetIrqMcuSampleRate(Soc_Aud_IRQ_MCU_MODE_IRQ2_MCU_MODE, substream->runtime->rate);
    SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ2_MCU_MODE, true);

    SetSampleRate(Soc_Aud_Digital_Block_MEM_VUL_DATA2, substream->runtime->rate);
    SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_VUL_DATA2, true);

    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I17, Soc_Aud_InterConnectionOutput_O21);
    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I18, Soc_Aud_InterConnectionOutput_O22);
    EnableAfe(true);

}
开发者ID:Scorpio92，项目名称:mediatek，代码行数:34，代码来源:mt_soc_pcm_capture2.c

示例6: mtk_voice_close

static int mtk_voice_close(struct snd_pcm_substream *substream)
{
    printk("mtk_voice_close \n");

    if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
    {
        printk("%s  with SNDRV_PCM_STREAM_CAPTURE \n", __func__);
        AudDrv_Clk_Off();
        AudDrv_ADC_Clk_Off();
        return 0;
    }

    //  todo : enable sidetone
    // here start digital part
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I03, Soc_Aud_InterConnectionOutput_O17);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I04, Soc_Aud_InterConnectionOutput_O18);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I14, Soc_Aud_InterConnectionOutput_O03);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I14, Soc_Aud_InterConnectionOutput_O04);

    SetI2SAdcEnable(false);
    SetI2SDacEnable(false);
    SetModemPcmEnable(MODEM_1, false);
    SetMemoryPathEnable(Soc_Aud_Digital_Block_I2S_OUT_DAC, false);
    SetMemoryPathEnable(Soc_Aud_Digital_Block_I2S_IN_ADC, false);

    EnableAfe(false);
    AudDrv_Clk_Off();
    AudDrv_ADC_Clk_Off();

    Voice_Status = false;

    return 0;
}
开发者ID:Scorpio92，项目名称:mediatek，代码行数:33，代码来源:mt_soc_pcm_voice_md1.c

示例7: mtk_pcm_fm_i2s_close

static int mtk_pcm_fm_i2s_close(struct snd_pcm_substream *substream)
{
    struct snd_pcm_runtime *runtime = substream->runtime;
    printk("%s rate = %d\n", __func__, runtime->rate);

    //mtk_wcn_cmb_stub_audio_ctrl((CMB_STUB_AIF_X)CMB_STUB_AIF_0);//temp mark for early porting

    SetMemoryPathEnable(Soc_Aud_Digital_Block_I2S_IN_2, false);
    if (GetMemoryPathEnable(Soc_Aud_Digital_Block_I2S_IN_2) == false)
    {
        SetI2SASRCEnable(false);
        SetI2SASRCConfig(false, 0); // Setting to bypass ASRC
        Set2ndI2SInEnable(false);
    }

    SetMemoryPathEnable(Soc_Aud_Digital_Block_I2S_OUT_DAC, false);
    if (GetI2SDacEnable() == false)
    {
        SetI2SDacEnable(false);
    }

    // interconnection setting
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I00, Soc_Aud_InterConnectionOutput_O13);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I01, Soc_Aud_InterConnectionOutput_O14);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I10, Soc_Aud_InterConnectionOutput_O03);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I11, Soc_Aud_InterConnectionOutput_O04);


    EnableAfe(false);

    AudDrv_I2S_Clk_Off();
    AudDrv_Clk_Off();
    mPrepareDone = false;
    return 0;
}
开发者ID:AudioGod，项目名称:MediaTek-HelioX10-Kernel，代码行数:35，代码来源:mt_soc_pcm_fm_i2s.c

示例8: mtk_pcm_dl1_stop

static int mtk_pcm_dl1_stop(struct snd_pcm_substream *substream)
{

    AFE_BLOCK_T *Afe_Block = &(pMemControl->rBlock);
    PRINTK_AUDDRV("mtk_pcm_dl1_stop \n");

    printk("%s \n", __func__);
    SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, false);

    // here to turn off digital part
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I05, Soc_Aud_InterConnectionOutput_O03);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I06, Soc_Aud_InterConnectionOutput_O04);
    SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_DL1, false);

    SetMemoryPathEnable(Soc_Aud_Digital_Block_I2S_OUT_DAC, false);
    if (GetI2SDacEnable() == false)
    {
        SetI2SDacEnable(false);
    }
    EnableAfe(false);
    RemoveMemifSubStream(Soc_Aud_Digital_Block_MEM_DL1,substream);
    AudDrv_Clk_Off();

    return 0;
}
开发者ID:Scorpio92，项目名称:mediatek，代码行数:25，代码来源:mt_soc_pcm_dl1.c

示例9: mtk_pcm_dl1Bt_stop

static int mtk_pcm_dl1Bt_stop(struct snd_pcm_substream *substream)
{

    AFE_BLOCK_T *Afe_Block = &(pdl1btMemControl->rBlock);
    PRINTK_AUDDRV("mtk_pcm_dl1Bt_stop \n");

    SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, false);

    // here to turn off digital part
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I05, Soc_Aud_InterConnectionOutput_O02);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I06, Soc_Aud_InterConnectionOutput_O02);
    SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_DL1, false);

    SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, false);

    SetMemoryPathEnable(Soc_Aud_Digital_Block_DAI_BT, false);
    if (GetMemoryPathEnable(Soc_Aud_Digital_Block_DAI_BT) == false)
    {
        SetDaiBtEnable(false);
    }

    EnableAfe(false);
    RemoveMemifSubStream(Soc_Aud_Digital_Block_MEM_DL1,substream);
    AudDrv_Clk_Off();

    return 0;
}
开发者ID:alex-tu-cc，项目名称:m75，代码行数:27，代码来源:mt_soc_pcm_dl1_bt.c

示例10: mtk_pcm_fmtx_stop

static int mtk_pcm_fmtx_stop(struct snd_pcm_substream *substream)
{
    struct snd_pcm_runtime *runtime = substream->runtime;

    //AFE_BLOCK_T *Afe_Block = &(pMemControl->rBlock);
    PRINTK_AUD_FMTX("mtk_pcm_fmtx_stop \n");

    SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, false);

    // here to turn off digital part
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I05, Soc_Aud_InterConnectionOutput_O00);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I06, Soc_Aud_InterConnectionOutput_O01);

    //    if (GetMrgI2SEnable() == false)
    //    {
    SetMrgI2SEnable(false, runtime->rate);
    //    }

    SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_DL1, false);

    SetMemoryPathEnable(Soc_Aud_Digital_Block_MRG_I2S_OUT, false);

    Set2ndI2SOutEnable(false);

    EnableAfe(false);

    RemoveMemifSubStream(Soc_Aud_Digital_Block_MEM_DL1, substream);
    AudDrv_Clk_Off();

    return 0;
}
开发者ID:4Fwolf，项目名称:signal75-kernel-3.10.61，代码行数:31，代码来源:mt_soc_pcm_fmtx.c

示例11: StartAudioCaptureHardware

static void StartAudioCaptureHardware(struct snd_pcm_substream *substream)
{
    printk("StartAudioCaptureHardware \n");

    ConfigAdcI2S(substream);
    SetI2SAdcIn(mAudioDigitalI2S);
    //EnableSideGenHw(Soc_Aud_InterConnectionOutput_O09,Soc_Aud_MemIF_Direction_DIRECTION_OUTPUT,true);

    SetMemIfFetchFormatPerSample(Soc_Aud_Digital_Block_MEM_VUL, AFE_WLEN_16_BIT);
    SetMemIfFetchFormatPerSample(Soc_Aud_Digital_Block_MEM_VUL, AFE_WLEN_16_BIT);
    SetoutputConnectionFormat(OUTPUT_DATA_FORMAT_16BIT, Soc_Aud_InterConnectionOutput_O09);
    SetoutputConnectionFormat(OUTPUT_DATA_FORMAT_16BIT, Soc_Aud_InterConnectionOutput_O10);

    SetI2SAdcEnable(true);

    // here to set interrupt
    SetIrqMcuCounter(Soc_Aud_IRQ_MCU_MODE_IRQ2_MCU_MODE, substream->runtime->period_size);
    SetIrqMcuSampleRate(Soc_Aud_IRQ_MCU_MODE_IRQ2_MCU_MODE, substream->runtime->rate);
    SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ2_MCU_MODE, true);

    SetSampleRate(Soc_Aud_Digital_Block_MEM_VUL, substream->runtime->rate);
    SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_VUL, true);

    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I03, Soc_Aud_InterConnectionOutput_O09);
    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I04, Soc_Aud_InterConnectionOutput_O10);

    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I05, Soc_Aud_InterConnectionOutput_O09);
    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I06, Soc_Aud_InterConnectionOutput_O10);

    EnableAfe(true);

}
开发者ID:4Fwolf，项目名称:motorola-hawk-kernel-3.4.67，代码行数:32，代码来源:mt_soc_pcm_capture.c

示例12: mtk_pcm_i2s0_stop

static int mtk_pcm_i2s0_stop(struct snd_pcm_substream *substream)
{
    AFE_BLOCK_T *Afe_Block = &(pI2s0MemControl->rBlock);

    printk("mtk_pcm_i2s0_stop \n");
    SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, false);

    // here start digital part
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I05, Soc_Aud_InterConnectionOutput_O00);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I06, Soc_Aud_InterConnectionOutput_O01);
    SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_DL1, false);

    // stop I2S
    Afe_Set_Reg(AFE_I2S_CON3, 0x0, 0x1);
    Afe_Set_Reg(AFE_I2S_CON, 0x0, 0x1);

    EnableAfe(false);

    // clean audio hardware buffer
    memset(Afe_Block->pucVirtBufAddr, 0, Afe_Block->u4BufferSize);
    RemoveMemifSubStream(Soc_Aud_Digital_Block_MEM_DL1,substream);
    AudDrv_Clk_Off();

    return 0;
}
开发者ID:Scorpio92，项目名称:mediatek，代码行数:25，代码来源:mt_soc_pcm_dl1_i2s0.c

示例13: mtk_pcm_dl2_start

static int mtk_pcm_dl2_start(struct snd_pcm_substream *substream)
{
	struct snd_pcm_runtime *runtime = substream->runtime;

	pr_warn("%s\n", __func__);
	/* here start digital part */

	SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I07,
		      Soc_Aud_InterConnectionOutput_O03);
	SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I08,
		      Soc_Aud_InterConnectionOutput_O04);

#ifdef CONFIG_MTK_FPGA
	/* set loopback test interconnection */
	SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I07,
		      Soc_Aud_InterConnectionOutput_O09);
	SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I08,
		      Soc_Aud_InterConnectionOutput_O10);
#endif

	SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, true);

	SetSampleRate(Soc_Aud_Digital_Block_MEM_DL2, runtime->rate);
	SetChannels(Soc_Aud_Digital_Block_MEM_DL2, runtime->channels);
	SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_DL2, true);

	SetIrqMcuCounter(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, runtime->period_size);
	SetIrqMcuSampleRate(Soc_Aud_IRQ_MCU_MODE_IRQ1_MCU_MODE, runtime->rate);
	EnableAfe(true);
	return 0;
}
开发者ID:P-D-A，项目名称:android_kernel_lge_mt6753，代码行数:31，代码来源:mt_soc_pcm_dl2.c

示例14: StartAudioMrgrxAWBHardware

static void StartAudioMrgrxAWBHardware(struct snd_pcm_substream *substream)
{
    printk("StartAudioMrgrxAWBHardware \n");

    // here to set interrupt
    SetIrqMcuCounter(Soc_Aud_IRQ_MCU_MODE_IRQ2_MCU_MODE, substream->runtime->period_size>>1);
    SetIrqMcuSampleRate( Soc_Aud_IRQ_MCU_MODE_IRQ2_MCU_MODE, substream->runtime->rate);
    SetIrqEnable(Soc_Aud_IRQ_MCU_MODE_IRQ2_MCU_MODE, true);

    SetSampleRate(Soc_Aud_Digital_Block_MEM_AWB, substream->runtime->rate);
    SetMemoryPathEnable(Soc_Aud_Digital_Block_MEM_AWB,true);

    // here to turn off digital part
    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I15, Soc_Aud_InterConnectionOutput_O05);
    SetConnection(Soc_Aud_InterCon_Connection, Soc_Aud_InterConnectionInput_I16, Soc_Aud_InterConnectionOutput_O06);

    if(GetMemoryPathEnable(Soc_Aud_Digital_Block_MRG_I2S_OUT )== false)
    {
        //set merge interface
        SetMemoryPathEnable(Soc_Aud_Digital_Block_MRG_I2S_OUT, true);
        SetMrgI2SEnable(true, substream->runtime->rate);
    }
    else
    {
        SetMemoryPathEnable(Soc_Aud_Digital_Block_MRG_I2S_OUT, true);
    }

    EnableAfe(true);
}
开发者ID:resbeut，项目名称:S5501-3.10，代码行数:29，代码来源:mt_soc_pcm_mrgrx_awb.c

示例15: mtk_pcm_mrgrx_close

static int mtk_pcm_mrgrx_close(struct snd_pcm_substream *substream)
{
    struct snd_pcm_runtime *runtime = substream->runtime;
    printk("%s \n", __func__);

    mtk_wcn_cmb_stub_audio_ctrl((CMB_STUB_AIF_X)CMB_STUB_AIF_0);

    SetMemoryPathEnable(Soc_Aud_Digital_Block_MRG_I2S_OUT, false);
    if (GetMemoryPathEnable(Soc_Aud_Digital_Block_MRG_I2S_OUT) == false)
    {
        SetMrgI2SEnable(false, runtime->rate);
    }

    SetMemoryPathEnable(Soc_Aud_Digital_Block_I2S_OUT_DAC, false);
    if (GetI2SDacEnable() == false)
    {
        SetI2SDacEnable(false);
    }

    // interconnection setting
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I15, Soc_Aud_InterConnectionOutput_O13);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I16, Soc_Aud_InterConnectionOutput_O14);

    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I10, Soc_Aud_InterConnectionOutput_O03);
    SetConnection(Soc_Aud_InterCon_DisConnect, Soc_Aud_InterConnectionInput_I11, Soc_Aud_InterConnectionOutput_O04);


    EnableAfe(false);

    AudDrv_Clk_Off();
    mPrepareDone = false;
    return 0;
}
开发者ID:AudioGod，项目名称:MediaTek-HelioX10-Kernel，代码行数:33，代码来源:mt_soc_pcm_mrgrx.c


注：本文中的SetConnection函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。